Adding a person on skype

Hi, is it possible to send messages to the person who is yet to be added to the skype messenger? Can a person receive and read messages if they are not added to the list? I have sent additional messages to someone while sending a request to add, so just wanted to confirm if they'll be able to get them or not.
Also, a new feature where you can 'remove/delete' a message, if I am able to remove/delete a message that I send to someone, does that mean that the other person hasn't read it yet?

how do I restore the archive on skype after blocking a person?

Similar Messages

I added a persona, I've disabled and removed that persona, it keeps coming back. Going into tools does not help, adding a new persona does not help. I'm ready to give up on firefox!

I added a persona, wanted a new one so disabled and removed the old one. I added a new persona, but the old one keeps coming back. Going into tools/add ons does no good because it is not even listed anymore but keeps coming back. I've shut down/restarted, I've searched for answers to this problem.

The data that specifies which persona to display is stored as a pref in the prefs.js file in the Firefox Profile Folder.
Did you try to rename or move the prefs.js file and a possible user.js file to see if that helps?
Are you using the Personas Plus extension, because in that case you need to check the settings in that extension.
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder

Workflow stopped working when we added new person to dummy HR position

Hi,
We have a third party expense reporting system which apparently sends some sort of IDOC to our SAP system. This uses a HR dummy position in a dummy org to which users have been assigned. These users are supposed to receive workflow emails that are expense reporting related.
In August we added a person to this HR position and there were no issues.
In October we added a person to this HR position and workflow stopped working. We tried taking the person back off who was last added and workflow will not come back on.
How do we get the workflow to process again? We can figure out why that one person didn't work if we can get the workflow working for the other 5 people going again.
Sorry for the high level details of the issue. I haven't worked all the parts of it and am just pulling info from people to try and help find a solution.
UPDATE:
Here is the problem as described by my colleague.
For the Concur expense reporting system, the data from the Concur system is communicated as IDOCs to SAP through the PI middleware. When these IDOCs fail during the inbound processing (status 51) emails will be triggered and sent to the org unit (position - 50003828). A change was made to the position by the HR team on Oct 7th (a new user was added and one was removed). Since then the users have stopped receiving emails. The workflow has stopped.
We tried to take that new user back off and the email did not start back up. We would like to get it started again and then figure out how to add that new user without an issue.
Thanks,
Wendy
Edited by: Wendy Miller on Nov 11, 2011 11:59 AM

Hello,
"A change was made to the position by the HR team on Oct 7th (a new user was added and one was removed). Since then the users have stopped receiving emails. The workflow has stopped."
The fact that the users have stopped receiving emails does not mean that the workflow has stopped. Ask your colleague why he thinks that.
My guess: a change was made to that position, for example it was date-delimited so that it's no longer valid.
As suggested above, look in SWI1. It'll be very easy if you know what the workflow number (WS....) is.
Is it absolutely certain that it's a workflow sending these mails? If you look at an example of a mail, who was it sent by?
Applying SWI1_RULE would only help if there was just one new user not receiving emails.
regards
Rick Bakker
hanabi technology

Adding multiple contacts with Skype manager

This support page: https://support.skype.com/en/faq/FA10867/how-do-i-add-other-members-of-my-skype-manager-to-my-contac... indicates that there's an option on the left-hand side to select multiple contacts. I'm not seeing this on the page described, I can only add contacts one by one. Is this feature something I need to "turn on" somewhere in my settings?
In addition, I've noticed in the past month or so, even by adding contacts one-by-one, only around the first 40 people receive the request to be added as a contact. After that, no one receives invites. This is very frustrating for adding all of our business's contacts at the same time.
I've tried this in Mac 10.7.4 and 10.8. I've also switched to a PC, but the same thing happens. Does anyone have any insights?

Just an update (2013 Nov 25). There is now an option to add multiple contact using csv file. Here is a simple direction: Create a csv file with 2 columns 1st column is the email address and the 2nd column is the name of the account. Then go to Members > Add members > create business accounts > then click on Browse..., choose the file you just created and it should be able to import the contacts.

User pictures are not shown when users are added to person field in custom list

Hi,
Recently we have migrated our intranet from SP2010 to SP2013. We upgraded User profile service application, My sites and Intranet site to new environment. We haven't upgraded sites to use SP 2013 templates due to some business decisions. Everything
is working fine and as expected.
There are few lists in our environment where we have added users in a persons fields and allowed to show their pictures with details along with name. these user pictures are not being shown on to the page. After looking in picture property I found that "white
Space" in a picture library name is replace by %2520 instead of %20 (/user%2520photos/profile%2520pictures).
I tried reproducing problem on a new team site with SP 2010 template and it is reproduced however it is not occurring for a team site with SP 2013 template.
Any suggestions would be very helpful for resolving this issue. Thanks in advance.
-Amol Meshe

We are experiencing the same issue. We get a /User%2520Photos/Profile%2520Pictures/ path anytime we use the people picker field with the option to display picture or the picture and details option.
EDIT: This is only a problem on the list view. If you open the display form the image shows just fine. I can't see any setting view Edit Page and updating the web part that contains the list data to correct this.
Michael Allen (.NET and SharePoint 2010 Developer)

Can you call more than one person on skype?

When you are on Skype can you video chat with more than one person / conference call?

Yes. Microsoft owns Skype. So signing in with a Microsoft Account will log you into skype on that account.
You can initiate a multi part conference call from a computer opt an iPad that is looged on using a Microsoft Account.
Buit you can also start a peer to peer call from your iPad.

Adding a personal email account

I'm trying to add a personal email account to my BlackBerry but keep getting the message "At this time your email, calendar and contacts accounts can't be added - please try again later". With my previous BlackBerry (which was the same model) I just added the email address and password and that was it. Can anyone help?

Hi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (step 1 should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRTKB00510 How to register a BlackBerry smartphone with the wireless networkPlease wait for one "registration" message to appear2) RebootBB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process.IF this fails, you can attempt the more forceful method of holding the up/down volume keys until the device fully shuts down. Wait a bit and them power up normally.See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.Hopefully that will get things going again for you! If not, then you should try other email accounts so as to determine if it's just this one account that is the problem. Otherwise, you should contact your mobile service provider for formal support.
Good luck!

Adding a person in Messages 8.1?

I have been unable to add a person to a message. I'm running iOS 8.1 on all devices and Yosemite 10.10 on my iMac. When I click "details" there is no option to add someone. I don't have any group messages saved right now, so maybe that is it? You'd think you could add another person to a single person conversation. Does any one know if that's possible? Maybe I'm doing something wrong when trying to add a person.

Do they have Acrobat? Or do they have the free Adobe Reader? What does the message say EXACTLY?

We are rolling out MACS to all of our office ! How do I load everyone into iChat without adding each person individually ?

We are using Google mail. How can I pre-load everyone's buddies in iChat without adding in one-by-one ?

HI,
Depending if you are using a Disk Image to keep all Macs at the same OS X level then you can have a "global Address Book".
Realistically it is really about each end user adding the Buddies (via their Screen name or Jabber ID - your sounds like it will be Jabber IDs as it is Google).
You will also have to Enable Talk on all th Google Mail Accounts. (it is in the Google Settings no the Mail Web page settings)
10:14 PM Wednesday; August 28, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Iweb 08 "adding a personal domain

I've got I life 08 on my powerbook and I'm trying to add my personal domain by following the instructions and I can't get by this message...
The domain names you entered don't match. Please try again
It says to enter my domain and confirm it so I've tried that many times as well as rebooting then trying again etc. I've opened my domain and was paying for support through ipowerweb but I'm trying to convert to mac now. Has anyone else seen this error?

This is what the screen looks like when the error occurs!
Add Personal Domain (1 of 2)
The domain names you entered don't match. Please try again.
Enter your domain name below and click Continue.
Domain Name
www.ralstongolfclub.com
Confirm Domain
www.ralstongolfclub.com
Hmmmmmmm. I am new at this but have ran a site for 5 years through ipowerweb without many problems.
Thanks in advance to anyone that can help.

How do I stop iChat from adding this person?

Ever had someone who's not on your buddy list IM you? And you respond, of course. Well suddenly you look on your buddy list and there's their name. Why? Don't know. Did you add them? Nope. Yet there they are.
I can't seem to find a preference for this anywhere, is this just something I have to deal with? I know it's being done for convenience but... Honestly, it's not convenient.

Hi Doug,
Have you ever used the AIM for Mac or AIM application on a PC ?
The AIM application whichever platform it is on includes a Recent Buddies Group to which all new contact are added by default.
iChat does not normally use this group but it can become activated if there are Buddies in it and they then appear in your Buddy List, and new contacts continue to be added.
The way around this is to use the AIM application to move Buddies out of this group and then delete the group.
8:26 PM Tuesday; June 19, 2007

Adding a personal domain name

I want to add a new personal domain name in my mobile me account, but through all the tutorials the ADD button does not appear. Can anyone advise as to why?

With MobileMe being discontinued next June 30th you might want to start looking for a new web host to publishs your websites to. That way you can have multiple domain names all accessed the same way.
This may be of help to you: Life After MobileMe, particulary the tutorial: 28 - Using HostExcellence.com with iWeb.
OT

Adding a person to a 3D rendered photo

Hi.
I'm new to Photoshop CC (Just had Photoshop Elements 11)
So, to the question.
I wanna edit a photo of myself to a Background photo.
I know how to get myself in there, but how do I make it look realistic? with the same light and colors that are in the background photo.
Posting the background here.
So, I want to try to get myself sitting into this wall. But how do I get it to look realistic?
Sorry for my bad English.
Hope for answers!
Thanks!

Ok.
Thanks for quick answering
For the photo I will take one of me sitting into a wall so that it would be easier for me to put in to the background.
But I understand if it`s to difficult for me to get it to look realistic..
Thanks
Leivar

I am able to hear contact person on skype but they are unable to hear me

HP Notebook G61

Resolving Microphone Problems:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01926155&tmp_task=solveCategory&cc=us&dlc=en&la...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Adding another persons music to my computer and keep everything separate

I am getting married soon. My fiance and I both have iTunes on separate computers with our own different music. We will be getting rid of one computer. Is there a way to combine both of our libraries to one computer, but keep everything on each of our current iTunes separate from one another on the one computer so we can keep our iPods from getting each others music?
HP 775y Windows XP

Should be possible. You will need to transfer the files from one computer to the other somehow. If there will be no interaction between the music files then all you need to do is create a second user account on the computer. In that account, within iTunes import the files that user wants in the library.
Using two user accounts each one will have separate libraries and playlists.

Adding a person on skype

Similar Messages

Maybe you are looking for