Adding accounts to website

hello i am currently building a website and would like for people to create an account with my website. i have tried accountify, which uses php and sql, but am having a very difficult time with it. i was wondering if anyone knew of any other software, or of any tutorials or videos that can show me how to do it.

There are a ton of very good systems out there. Some are based around forums like Invision Power Board, vBulletin, phpBB, or Simple Machines forum. Or you have the Content Management Systems like Drupal, Contao and Typo3.
Otherwise, building your own will require some basic knowledge of PHP/mySQL.
I recommend taking a look at the above options and if you still decide you want to try building one we can start to point you in the right direction.

Similar Messages

I am trying to set up a child account where websites are restricted unless they are on the approved list, however youtube is still allowed. How do I block youtube?

I am trying to set up a child account where websites are restricted unless they are on the approved list, however youtube is still allowed. How do I block youtube?

Hello jmkibert,
Thank you for using Apple Support Communities.
For more information, take a look at:
OS X Mavericks: Set up parental controls
http://support.apple.com/kb/PH14414
Web > try to limit access to adult websites > customize > never allow these websites.
Have a nice day,
Mario

Want to buy something Ap Store and I came to buy I have the answers to the questions of safety, now I forgot them, I went to MY ACCOUNT MANAGER website and there was no reset was some other reset but it asked for the answers to Secure

Want to buy something Ap Store and I came to buy I have the answers to the questions of safety, now I forgot them, I went to MY ACCOUNT MANAGER website and there was no reset was some other reset but it asked for the answers to Secure

Morning AndreD86,
Thanks for using Apple Support Communities.
These articles explain exactly what is backed up by using their method.
iTunes: About iOS backups
http://support.apple.com/kb/ht4946
and
iCloud: Backup and restore overview
http://support.apple.com/kb/ht4859
Also we want to double-click the Home button and swipe the Task Bar to the right.
Then make sure the button on the far left of Task Bar is not muted.
Best of luck,
Mario

Email was working fine. Now not working even though nothing changed. Deleted acct turned off iPad turned on and added account again. Can receive mail but not send. Sometimes says relay not allowed sometimes different message.

Email was working fine. Now not working even though nothing changed. Deleted acct turned off iPad turned on and added account again. Can receive mail but not send. Sometimes says relay not allowed sometimes different message.

Try going into Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if you can then send emails

Gmail adding account issues

Had to delete gmail account again as it was not updaing. Then trying to add back onto iphone and it just sits there saying adding account and never progressing from there. Done reboot as sucggested but still not joy. Is this ever going to be resolved as it is really frustrating as this is also now happening on my ipad.

Have you tried "unlocking" your GMail account for external access here:
https://www.google.com/accounts/UnlockCaptcha
Then setup the account on the phone again.

Adding to a website animation made in edge animate

Hello, I am web designer, I made several banners for our webpage in edge animate, and now our programmists are having trouble adding them to a website. May be someone can tell, what they did wrong? Or may be you may give as lint to a tutorial explaining, how to add it in the right way?
link to a website: https://imfoption.com/a/new-home-page/
link to a banner: http://giteldesign.com/portfolio/works/banners/imfoption/man-moving/

This may be because of the site being served on https and some of the edge animate scripts being served over http, which are blocked by the browser. You can change the URL scheme from http to https in the file /wp-content/themes/imfoption/js/newban/man_edgeActions.js to make it work.
Following URLs will need a change:
aLoader = [
      { load: "http://imfoption.com/wp-content/themes/imfoption/js/newban/edge_includes/jquery-2.0.3.min. js"},
      { load: "http://imfoption.com/wp-content/themes/imfoption/js/newban/edge_includes/edge.4.0.0.min.js"},
      { load: "http://imfoption.com/wp-content/themes/imfoption/js/newban/man_edge.js"},
      { load: "http://imfoption.com/wp-content/themes/imfoption/js/newban/man_edgeActions.js"}];
You can also just use the URLs without a scheme as follows, then the scheme will be automatically chosen.
aLoader = [
      { load: "//imfoption.com/wp-content/themes/imfoption/js/newban/edge_includes/jquery-2.0.3.min.js" },
      { load: "//imfoption.com/wp-content/themes/imfoption/js/newban/edge_includes/edge.4.0.0.min.js"},
      { load: "//imfoption.com/wp-content/themes/imfoption/js/newban/man_edge.js"},
      { load: "//imfoption.com/wp-content/themes/imfoption/js/newban/man_edgeActions.js"}];
There are some other resources which are loaded over http, for eg:
http://fonts.googleapis.com/css?family=Economica%3A700%2C400italic&ver=1.7.4
http://imfoption.com/wp-content/themes/imfoption/css/impreza/fonts/fontawesome-webfont.svg ?v=4.0.3
These may or may not work depending on the client settings, ideally you should fix all of these issues too. Hope this helps.
-Dharmendra

I can no longer sign in to my hotmail account on my ipad or MacBook. Hotmail works on my android. I have tried deleting and adding account. Won't add.

Help...as of this morning, my ipad and MacBook Pro will not sign into my hotmail. It is not hotmail or my account, because it works on my galaxy phone. I have tried deleting the hotmail account and reading on my Mac, but it won't let me.

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
http://support.apple.com/kb/TS1944
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Delete Email on the iPad
http://ipad.about.com/od/iPad_Guide/ss/How-To-Delete-Email-On-The-Ipad.htm
How to Mass Delete Emails from iPhone and iPad Inbox (with video)
http://suiteminute.com/how-to-mass-delete-emails-from-iphone-and-ipad-inbox/
How to add, send and open iPad email attachments
http://www.iskysoft.com/apple-ipad/ipad-email-attachments.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iCloud: Create a group and add contacts to it
http://support.apple.com/kb/PH2667
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

HT1918 despite changing my apple twice id somebody in N. America/Canada is downloading games from my account. the website does not give me any recourse to correct this and track who is doing this. Any suggestion would be gratefully received

Hi,
I cannot seem to find any help for a situation that has now occurred twice, despite changing my apple id on bith occasions. Twice now, once from Canada, the second time from the USA, someone has downloaded games using my account.
The website seems particularly unhelpful as to how to rectify this and Apple do not appear to want to take responsibility for helping me sort this out. any suggestions would be gratefull received.

Hi aughton880,
To address your immediate issue, for any purchases you did not make I would report by following these instructions:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Two step authentication may be a good security measure to add to your account to prevent future issues:
Apple ID: Frequently asked questions about two-step verification for Apple ID
http://support.apple.com/kb/HT5570
I would recommend changing your password as well:
Apple ID: Changing your Apple ID password
http://support.apple.com/kb/HT5624
I hope this helps!
- Ari

Yosemite. iPhoto has stopped sharing pix via email. Have tried removing and re-adding accounts. This is a new problem. What gives??

I recently had a new hard drive installed and upgraded to Yosemite 10.10.1 on a Macbook Pro. No problems for the first week, then iPhoto 9.6 stopped sharing pix via email. I tried removing and re-adding my accounts but that didn't help. Thanks in advance for any advice. Ra Buck.

PS. IPhoto doesn't seem to connect, but I'm not getting an error message.

Help needed adding xml into website

I am looking for some help adding a few .xml files into my
website using Dreamweaver
First ..I would like to add the following RDS.xml file below.
I would like it to go into a box that is 100 x 100 px
<?xml version="1.0" encoding="utf-8" ?>
- <Playing station="HAWK">
- <item type="MUS">
<DateTime>Thu 10:52AM</DateTime>
<Cart />
<Artist>THE ROLLING STONES</Artist>
<SongTitle>JUMPIN' JACK FLASH</SongTitle>
</item>
</Playing>
Second ..an event.xml file that will scroll info with box
dimensions of 400 px w x 30 px h.
Both xml files would be on my site in a user_files folder
Any help would be greatly appreciated. Rob

> To use Dreamweaver, you'll need to write some code to
transform the XML
> into
> HTML. What code to write will depend on the server-side
scripting language
> you are using.
It means that you can't just plop in XML in the middle of
your HTML. Your
pages are HTML, so the XML needs to be transformed in to HTML
first. There
are various ways to do this. Are you using PHP? ASP? Etc.
Once we know that,
we can narrow down a solution for you.
-Darrel

CALDAV not adding accounts in iPhone

Hello!
We have a private server here (we're a small company) and have just upgraded to Snow Leopard on it and all of our individual machines. Additionally, everyone's iPhones are running 3.0 or higher, which supports CALDAV integration (or, so we've been led to believe) that we were really excited to finally et to implement. But we are having major issues.
When I go to: (in the phone) settings>mail, contacts, calendars>add account>other>add caldav account and then proceed to input all of our calendar information using the same information we used to setup our desktop calendars so we know the information is valid (we all have individual ical accounts on the server) then hit 'next' I keep (and so does everybody else) getting an error message saying "caldav account verification failed". EVERY TIME.
We know for a fact that we're inputting the correct information because we'll put in the same information on iCal on a laptop when adding a new account, and it works just fine.
(Back to the iPhone) Even though the verification failed, it will still give me the option to save, so when I tap that, I get another message saying "This account may not be able to sync calendars. Are you sure you want to save?". That defeats the purpose of trying to add a caldav account to my iphone, but whatever, I'll hit save.
Then, after the account is added, a dialogue box keeps popping up saying "Password Incorrect" and asking me to input it again. I do and wait a second and then it keeps doing it over and over and over again regardless of my having already inputted the correct password every time.
Can somebody help me with this?

I can see all my email accounts but they are not accessible. they are not in bold type to be able to be edited. same for the icloud line in settings, I can see my account ID but it's not in bold type in order to access it, like if I anted to trurn off the "find my Iphone" function???

Unable to make posts with account - Receive website unavailable message

I have two accounts. One prior to being an oracle employee (kevinp), and one for after leaving oracle and having my Oracle account mapped to my current account (Kevin Pinsky). Almost everytime i try and make a post with my current account, i get the error:
The website you are attempting to access is currently experiencing network connectivity errors. The problem is being worked on and will be resolved as soon as possible. We apologize for any inconvenience this may cause and thank you for your patience.If i sign in with my old account, i don't seem to have any problems. Can one of the administrators please contact me at the email address listed under either of my account. I am unable to provide assistance to users in the Identity Management forum.
Thanks!
-Kevin

If you are using IE 9 (maybe also IE 8), could you try File > New session (then log in) as a temporary workaround?
It sometimes works for me when there seem to be some single sign-on related issue.

Added account for children, system freaking out!

I gave it a try - i added an account with very limited functionality for the kids. Ever since then my system has been freaking out! I have the fast user switching enabled so I dont know if that's the problem. Sometimes I try to open an app and I get the beach ball of death. Stuff is locking up left and right. My printers stopped printing the jobs and they just sat in the print que. For some reason I never had a start up sound when I got my mac but now I do - yet the sound comes from the tower and not through my connected Bose speakers. Weird stuff going on here folks. What's going on?

Jeremy, Thanks for your reply.
There doesn't seem to be much detailed information on the use of Catagories with Processing rules in Help or in the forums. So let me see if I understand your suggestion correctly.
On the MII server create a processing rule for the message using a category instead of using a transaction, The message received by the message listener will be placed in a buffer. I am assuming these messages whould show up in the message monitor and not in the Data Buffer jobs/entries.
So in my transaction which normally processes this data I could add logic to access the message data; using the Message Service (Query, Read, Update and Delete) action blocks. I could pare down the selection by selecting messages based on the MessageCategory that I defined in the message processing rule. This will allow me to access the stored message data.
Finally use a scheduled Job to execute the transaction. The scheduled job would be run with a valid userID and Password so if it connection to the external database failed the enteries would be placed in the data buffer jobs with a valid userID credentials.
Does this sound like what you had in mind?

Online Authorization code for adding account manager not sending?

I'm trying to add an account manager and when I get to the part where it asks to input an authorization code, no numbers on my plan have received any such code.

Sorry you're having trouble adding an Account Manager, flannerybj! I've done it myself by adding my wife a year ago. I recall it being easy to handle. I want that to be your experience as well. The authorization code would be sent to the mobile number with the Account Owner's profile. Is that yours? If you're not sure, you can check when you log in. Next to your greeting name (assuming you've selected one, it will tell you which profile you have).
If you've confirmed that you have the Account Owner profile but still haven't gotten the message, please confirm that the number you're using is capable of messages (not a Hotspot/Jetback or a Home Phone Connect line).
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport

Adding accounts to Mac OS X 10.4.10 doesn't work?

I'm working on a donated Power Mac G4 running Mac OS X 10.4. I used Software Update to update to 10.4.10, but, after reading on this forum, I think this may be the problem.
When I add a user account with System Preferences, it works fine, but then I can't login with that account. It doesn't matter whether I add a password to the account or not. Even if I specify no password, it still asks for a password in the login window. No matter what I enter as the password, the login window shudders (wrong password) and won't let me login. I have one local admin account that I'm using (it was created when I received the Mac), but I'd like to add several more accounts.
I also tried repairing the permissions, but it didn't fix the problem.
When I try to logon, if I try three times, it prompts me for the "master password." Since this was donated, I have no idea what it is. I know it exists because I can see it is setup under System Preferences > Security. Any way to figure it out?
I don't have any CDs/DVDs (again, the computer was donated). Can I get the install discs without paying $130 for another copy of OS X? If I need to buy a copy, I'll probably wait until Leopard (October, right?)
It also appears that OS 9 is on there, too, if that helps anything.
Any ideas?
BTW, I'm not very familiar with Apples, but I've managed to figure out most of it so far.
Thanks in advance.
Power Mac G4 Mac OS X (10.4.10)
Power Mac G4 Mac OS X (10.4.10)

Don't know. I suspect there'll be some cost associated with getting them from Apple. They will be the ones specifically for the machine. See http://docs.info.apple.com/article.html?artnum=25784 for details. However, contacting the donor should be your first step.
Since you're a newcomer to the Mac, peruse Switching from Windows to Mac OS X and Basic Tutorials on using a Mac.
For details on master password, see http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1907.html and http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1903.html
I suggest getting the master password from the donor. If the donor can't remember it, then your best bet is do an Erase & Install and starting over from scratch (that requires the original disks). That way, you'll be configuring the machine to suit your needs and eliminating everything the donor did to the machine.

Adding accounts to website

Similar Messages

Maybe you are looking for