Adding more fields to ME55

I don't know if I should post this question of mine here...but I needed help. Also posted the question in ABAP-General forum. please help
original post:
I need to add more fields like Cost-Center etc to the result list of ME55. What is the best way to do this?
Please advise and thanks much in advance.
When I searched for this question on forum I did come across the question posted earlier but it was not answered. please help.

I have the same requirement of wanting to see the accoutn assignment on the report screen instead of drilling into the req. After investigating why the button didn't work I found a note 657090 dated 19.12.2003 the says:
"For displaying the source of supply and account assignment of the purchase requisitions, you should use the transaction ME5A.  the button "Sources of supply" and "Account Assignment" will be eliminated from the report ME55 (ALV Grid) after the implementaion of this note"
We are currently implementing ERP 6.0 and the button is still there 6 years later.  I would have thought that maybe this anomaly could have been fixed by now or maybe fix the functionality so it does work as obviously there is a requirement to improve the functionality of ME55 as shown in this thread. Will have to dig deeper I guess to understand why it hasn't happened or if it can be done.

Similar Messages

  • Refresh ALV by adding more fields

    Hi,
    I have created an ALV , now in display after pressing one button i want to add more fields in existing ALV and by refreshing, i would like to display it.
    How can i do that?
    Thanks in advance.

    Hi
    >********************************************************************
    This report displays User's info (SM04) using the FM : *
    REUSE_ALV_LIST_DISPLAY *
    The list is auto-refreshed (refresh time : 5 seconds) *
    TYPE-POOLS: slis. " ALV Global Types
    DATA :
    gt_user LIKE uinfo OCCURS 0 WITH HEADER LINE. " User info in SM04
    START-OF-SELECTION.
    PERFORM f_read_data.
    PERFORM f_display_data.
    Form F_LIRE_DATA
    FORM f_read_data.
    REFRESH gt_user.
    Get User's info
    CALL FUNCTION 'THUSRINFO'
    TABLES
    usr_tabl = gt_user.
    Wait in a task
    PERFORM f_call_rfc_wait.
    ENDFORM. " F_READ_DATA
    Form F_DISPLAY_DATA
    FORM f_display_data.
    DEFINE m_sort.
    add 1 to ls_sort-spos.
    ls_sort-fieldname = &1.
    append ls_sort to lt_sort.
    END-OF-DEFINITION.
    DEFINE m_event_exit.
    clear ls_event_exit.
    ls_event_exit-ucomm = &1.
    ls_event_exit-after = 'X'.
    append ls_event_exit to lt_event_exit.
    END-OF-DEFINITION.
    DATA :
    ls_layout TYPE slis_layout_alv,
    lt_sort TYPE slis_t_sortinfo_alv,
    ls_sort TYPE slis_sortinfo_alv,
    lt_event_exit TYPE slis_t_event_exit,
    ls_event_exit TYPE slis_event_exit.
    Build Sort Table
    m_sort 'ZEIT'.
    Build Event Exit Table
    m_event_exit '&NTE'. " Refresh
    ls_layout-zebra = 'X'.
    ls_layout-colwidth_optimize = 'X'.
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
    i_callback_program = sy-cprog
    i_callback_user_command = 'USER_COMMAND'
    is_layout = ls_layout
    i_structure_name = 'UINFO'
    it_sort = lt_sort
    it_event_exit = lt_event_exit
    TABLES
    t_outtab = gt_user.
    ENDFORM. " F_DISPLAY_DATA
    FORM USER_COMMAND *
    FORM user_command USING i_ucomm TYPE syucomm
    is_selfield TYPE slis_selfield. "#EC CALLED
    CASE i_ucomm.
    WHEN '&NTE'.
    PERFORM f_read_data.
    is_selfield-refresh = 'X'.
    SET USER-COMMAND '&OPT'. " Optimize columns width
    ENDCASE.
    ENDFORM. " USER_COMMAND
    Form F_CALL_RFC_WAIT
    FORM f_call_rfc_wait.
    DATA lv_mssg(80). "#EC NEEDED
    Wait in a task
    CALL FUNCTION 'RFC_PING_AND_WAIT' STARTING NEW TASK '001'
    PERFORMING f_task_end ON END OF TASK
    EXPORTING
    seconds = 5 " Refresh time
    busy_waiting = space
    EXCEPTIONS
    RESOURCE_FAILURE = 1
    communication_failure = 2 MESSAGE lv_mssg
    system_failure = 3 MESSAGE lv_mssg
    OTHERS = 4.
    ENDFORM. " F_CALL_RFC_WAIT
    Form F_TASK_END
    FORM f_task_end USING u_taskname.
    DATA lv_mssg(80). "#EC NEEDED
    Receiving task results
    RECEIVE RESULTS FROM FUNCTION 'RFC_PING_AND_WAIT'
    EXCEPTIONS
    RESOURCE_FAILURE = 1
    communication_failure = 2 MESSAGE lv_mssg
    system_failure = 3 MESSAGE lv_mssg
    OTHERS = 4.
    CHECK sy-subrc EQ 0.
    SET USER-COMMAND '&NTE'. " Refresh
    ENDFORM. " F_TASK_END
    END OF PROGRAM Z_ALV_AUTO_REFRESH ********************

  • Adding more fields to form

    Hello,
    I got a problem trying to add a new field to my form, the user insert the information and
    the phone number , but if the user have more than one phone i would like to he click in a button 'Add Phone'
    and another field appear in the form , The solution that i was thinking , when user press the button
    i send the information of the field to a bean , the bean will generate a new form , now
    with the field wich was filled with the phone and a new one empty , the bean return the new form
    and the page display the new form i dont know if it�s the best solution and if i will be able to reload the page
    to to show the new form.
    Does anyone have a better sugest or a code wich i can take a look, or this solution is better?
    Thank You
    Jean

    i did the same thing using DOM in javascript
    do something like this
    var data ="<INPUT type=text name=TestField value=></input>";
    var tbody = document.getElementById(id).getElementsByTagName("TBODY")[1];
    var row = document.createElement("TR");
    var td1 = document.createElement("TD");
    td1.appendChild(document.createElement(data));
    row.appendChild(td1);
    tbody.appendChild(row);
    hope this will work...

  • Adding more fields to a CMP EJB

    I'm using Sun's ONE studio 5, Sun ONE AS, and PointBase-db.
    I use the CMP EJB wizard to generate the skeleton for a CMP EJB, and specify to use a database-table from PointBase as the CMP-persistant fields.
    The problem arises when i want to add futher fields, when i try adding the in the IDE, i cant deploy the application(!)
    What am i doing wrong?
    Thank you in advance!

    Please see response to
    http://forum.java.sun.com/thread.jsp?forum=136&thread=444274&start=0&range=15#2191688
    vbk

  • Can i add more fields and change colours?/

    Hi this is probably a very simple question, with iCal at the moment i have three fields for appointments which are home/work/calendar. I can't find a way of adding more fields or changing the colours. Can it be done???

    Yes it can be done in iCal. On the bottom of the screen you will see a + sign. Click on that and a new calendar will show up in your list.
    To change calendar names or colors, right click on the checkbox for the desired calendar and a new pop up window will come up. From there you can rename the calendar or change it's color designation.

  • Adding one more field to the VL06O report

    Hi everybody
       When  u execute the TR code VL06O a screen will appear from that screen select list outbound deliveries and then provide some date and execute.
    The output will come having fields delivery,ship-to-party,name of ship-to-party like that 7 fields are there and now i want to see one more field called shipment number in the output along with the previuos 7 fields.
    what should i do it is a standard program?
    please guide me?

    Hello.
    See note 128150 to more details.
    There are user exists to add new fields (user fields).
    Regards.

  • "One or more field types are not installed properly" when I try to add a second discussion board web part to a page

    I have a SharePoint 2010 site with two discussion boards. I added one additional field to each of the boards: a lookup to another list to link the discussions to individual projects. I need 2 different boards because they have different posting permissions
    (one is open to all for comments, and one is open only to the project team to post but everyone can read).
    When I go to the pages for each of the discussion boards, they work fine.
    But I'm putting together a page for individual projects, and want to have web parts for both discussion boards on the same page, showing the discussions related to the selected project.
    I am able to add one of the discussion boards to a web part in the page, but when I add the second discussion board to the page, the new web part contains:
    One or more field types are not installed properly. Go to the list settings page to delete these fields.
    Correlation ID: blah blah blah
    I've searched for similar postings, but mostly I see this error message related to migration from 2007 to 2010 -- this is not the case here: I created both discussion boards, and the whole site, in SP 2010. I've also found this message related
    to coding errors using SPQuery. I am not doing any coding here, just using the built-in SharePoint 2010 Edit Page -> add a web part -> select the discussion list.  I tried doing it from SPD with the same result. 

    I figured it out. I was using ?FilterField1=fieldname&FilterValue1=value on the URL to the page to pick out one project number. The web part I was trying to add was for a list that did not have that particular fieldname. I didn't realize that would matter
    since I was using the Connections -> Get Filter Values From to get my filter values from the main web part, which does have that fieldname.
    I added a field with that fieldname to the other list and set a workflow to copy the lookup value of the project number lookup field into the new field. Now all is working fine.  Sorry for the wild geese in my original question.

  • One or more field types are not installed properly. Go to the list settings page to delete these fields.

    Hi Team,
    I have created Administrator -approved Infopath form template to my site and activated same template in CA.
    I have used this template in one of my Form library and i can able to submit the Form with success to the library.
    when i click "View Item" or "Edit Item" of the form it throws , "One or more field types are not installed properly. Go to the list settings page to delete these fields." error message.
    I have refered my log files also but there is no useful information in that, please find my logs for your reference.
    w3wp.exe (0x2D7C)                       
    0x3790
    SharePoint Foundation         
    Logging Correlation Data      
    xmnv
    Medium  
    Site=/sites/Prototypes
    w3wp.exe (0x2D7C)                       
    0x3790
    SharePoint Foundation         
    Monitoring                    
    b4ly
    High    
    Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=8.51588679566816
    w3wp.exe (0x2D7C)                       
    0x3790
    SharePoint Foundation         
    General                       
    8kh7
    High    
    One or more field types are not installed properly. Go to the list settings page to delete these fields.
    w3wp.exe (0x2D7C)                       
    0x3790
    SharePoint Foundation         
    General                       
    8sl1
    High    
    DelegateControl: Exception thrown while adding control 'ASP._controltemplates_publishingconsole_ascx': One or more field types are not installed properly. Go to the list settings page to delete these fields.
    w3wp.exe (0x2D7C)                       
    0x3790
    SharePoint Foundation         
    General                       
    8kh7
    High    
    One or more field types are not installed properly. Go to the list settings page to delete these fields.
    w3wp.exe (0x2D7C)                       
    0x3790
    SharePoint Foundation         
    Runtime                       
    tkau
    Unexpected
    System.Runtime.InteropServices.COMException: One or more field types are not installed properly. Go to the list settings page to delete these fields.   
    at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
    ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)    
    at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEA...
    w3wp.exe (0x2D7C)                       
    0x3790
    SharePoint Foundation         
    Runtime                       
    tkau
    Unexpected
    ...RRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
    w3wp.exe (0x2D7C)                       
    0x3790
    SharePoint Foundation         
    Monitoring                    
    b4ly
    Medium  
    Leaving Monitored Scope (Request (GET:http://test-sharepoint:80/sites/Prototypes/TRT/TRTLibrary/Forms/EditForm.aspx?ID=47&Source=http%3A%2F%2Ftest%2Dsharepoint%2Fsites%2FPrototypes%2FTRT%2FTRTLibrary%2FForms%2FAllItems%2Easpx&RootFolder=%2Fsites%2FPrototypes%2FTRT%2FTRTLibrary&ContentTypeId=0x01010100E7EE25E5A6898C4587A6B52C808EF03300FD54861D587A7E43BA3E2E6D392A3526&IsDlg=1)).
    Execution Time=32.443369199158
    w3wp.exe (0x08E4)                       
    0x2C58
    Access Services               
    Data Layer                    
    8jg2
    Medium  
    ResourceManager.PerformCleanup: Disk Manager: CurrentSize=0.
    w3wp.exe (0x08E4)                       
    0x2C58
    Access Services               
    Data Layer                    
    5pbr
    Medium  
    ResourceManager.EvictUnusedItems: Disk Manager: Going to evict unused items. CurrentSize: 0.
    w3wp.exe (0x08E4)                       
    0x2C58
    Access Services               
    Data Layer                    
    5pbs
    Medium  
    ResourceManager.EvictUnusedItems: Disk Manager: After unused items eviction. CurrentSize: 0 
    Diff:0.
    w3wp.exe (0x2D7C)                       
    0x0774
    SharePoint Foundation         
    Topology                      
    e5mc
    Medium  
    WcfSendRequest: RemoteAddress: 'http://test-sharepoint:32843/4ac2daef5ffe4850be08bd7bbebb5ac2/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
    MessageId: 'urn:uuid:dcba94c3-2764-428c-b44f-60e703328ceb'
    w3wp.exe (0x08E4)                       
    0x2E24
    SharePoint Foundation         
    Topology                      
    e5mb
    Medium  
    WcfReceiveRequest: LocalAddress: 'http://test-sharepoint.anca.com.au:32843/4ac2daef5ffe4850be08bd7bbebb5ac2/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
    MessageId: 'urn:uuid:dcba94c3-2764-428c-b44f-60e703328ceb'
    Jeeva

    Hello,
    Is there any other content type on library or check if there is any duplicate column? Could you please also show us your library columns detail? (pic is also fine of lib settings page)
    If you have any ""Property Promotion" column then SP create those columns as site column and associate them with this template so check "Allow management of content types" for that form library as well.
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • Added new field to ALV but not  displaying the ouput

    Hi guys,
    I'm adding one more column to be displayed on an old existing program that uses REUSE_ALV_FIELDCATALOG_MERGE to generate the ALV fieldcat.
    DATA : BEGIN OF itab OCCURS 0,
      matnr LIKE eina-matnr,
      extwg LIKE mara-extw,
      matkl LIKE mara-matkl,
      mtart LIKE mara-mtart,
      maktx LIKE makt-maktx,
      lifnr LIKE eina-lifnr,
      wglif LIKE eina-wglif,
    <span style="color:red">idnlf like eina-idnlf,          " <----
    new field</span>
      name1 LIKE lfa1-name1,
      profl LIKE mara-profl,
    END OF itab.
      CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
        EXPORTING
          i_program_name         = sy-cprog
          i_internal_tabname     = 'ITAB'
          i_client_never_display = ''
          i_inclname             = sy-cprog
         i_bypassing_buffer     = 'X'
        CHANGING
          ct_fieldcat            = t_cat
        EXCEPTIONS
          inconsistent_interface = 1
          program_error          = 2
          OTHERS                 = 3.
    I've added in a new field inside the ITAB internal table, but it wouldn't appear in the t_cat, only all the old fields will appear. What have i done wrong?

    Hi
      Facing similar kind of issue.. added one field to the existing internal table. This is not getting populted by the field catalog merge FM. Tried with the suggested solution also of running programs BALVBUFDEL,
    BCALV_BUFFER_DEL_SHARED then logging off  and logging in..
    But the newly added field is not getting populated. Any suggestions would be of great help.
    Regards,
    sridevi S

  • Adding new fields to existing cube

    Hi all,
    We have a cube with data, now we added 2 new fields to the datasource. And want to add two more fields in the Cube to correspond to the new fields. What would be the impact on the data that is already there in the cube? Can I go ahead and add the fields in the cube and start extracting data? What I want to know is what would be the implications in such a scenario?
    Any insight or help would be appreciated and fully rewarded.
    Thanks,
    Mav

    Hi,
    At least from the experience I had there were no performance issues. The only issue would be in terms of the time taken to transport. The larger the amount of data ,longer the transport time.
    You can continue extraction of data for those 2 fields from that point on. No need to empty the data from the cube and reload again. Only thing is that the data in the past for these 2 fields may not be mapped to the existing data in the cube. If you want to do that dump the cube and reload. Otherwise the data will be mapped from the time you start extracting the new fields with the data in the cube.
    Cheers,
    Kedar

  • How to add 2 more field to the  Header of FBL5N ALV report output

    Hi All,
    I have copied and made some modification to the standard transaction FBL5N and added some fields to the ALV report line Items but how to add fields to the header part i.e if you execute the transaction FBL5n, you will get the ALV report, in the header part customer no, company code then I need to add the 2 more fields. can any one tell me that which structure or where I need to add these fields to be appear in ALV output screen.
    Thanks in advance.
    Swapna.

    Hi Mohamed,
    If you copied Z-FM successfully, then you have to go to subroutine TOP_OF_PAGE to add your field:
    *&      Form  TOP_OF_PAGE
    FORM top_of_page.
      DATA: b_suppress   LIKE boole-boole,
            opfi_text    LIKE eptext OCCURS 10 WITH HEADER LINE,
            n_color      TYPE i.
    *  IF     NOT it_items-bukrs IS INITIAL               "737295
    *     AND NOT it_items-konto IS INITIAL               "737295
    *     AND NOT it_items-koart IS INITIAL.              "737295
      gs_items = gt_alv.
    *  ENDIF.                                             "737295
    * skip first call at top of page:
      IF NOT gd_first_top IS INITIAL.
        CLEAR gd_first_top.
        EXIT.
      ENDIF.
      IF x_grid = c_x OR x_inet = c_x.                          "1012201
        PERFORM grid_top_of_page.
        EXIT.
      ENDIF.
    *... open FI: get header text.
    * first fill some RFXPO fields for general info:
      CLEAR: s_rfxpo, wa_kna1, wa_lfa1, wa_ska1.
      s_rfxpo-bukrs = gs_items-bukrs.
      s_rfxpo-kkber = gs_items-kkber.
      s_rfxpo-koart = gs_items-koart.
      s_rfxpo-konto = gs_items-konto.
      s_rfxpo-vrbez = gs_variant-variant.
      s_rfxpo-waers = gs_items-waers.
    * update master record:
      PERFORM fill_master_rec  USING gs_items-koart
                                     gs_items-konto
                                     gs_items-bukrs. " note 698396
      CALL FUNCTION 'OPEN_FI_PERFORM_00001640_E'
        EXPORTING
          i_rfxpo             = s_rfxpo
          i_kna1              = wa_kna1
          i_lfa1              = wa_lfa1
          i_ska1              = wa_ska1
        IMPORTING
          e_suppress_standard = b_suppress
        TABLES
          t_lines             = opfi_text.
    *... display open FI text:
      IF x_konto_sort = 'X'.
        LOOP AT opfi_text.
          CASE opfi_text-color.
            WHEN 1.
              FORMAT COLOR 1.
            WHEN 2.
              FORMAT COLOR 2.
            WHEN 3.
              FORMAT COLOR 3.
            WHEN 4.
              FORMAT COLOR 4.
            WHEN 5.
              FORMAT COLOR 5.
            WHEN 6.
              FORMAT COLOR 6.
            WHEN 7.
              FORMAT COLOR 7.
          ENDCASE.
          WRITE: / opfi_text-text.
        ENDLOOP.
        FORMAT RESET.
      ENDIF.
    *... display other header text:
      IF b_suppress NE 'X'.
        PERFORM display_custom_header.
        PERFORM display_ccard_lines.
      ENDIF.
    " Put your field somewhere...
    ENDFORM.                               " TOP_OF_PAGE
    Good luck,
    Thanks,

  • Error with Dump while adding Currency field in UI

    Hello,
    I have a requirement to add a custom entity in MDGM with an currency attribute, and encountring dump while adding the field to Web Dynpro component in UI.
    Could some one point me a direction and see below :
    Custom Entity with attributes
    ZTSTOCK  data element is type curr (Lenght 13, Dec 2)
    Data Model is activated without errors and created custom Web Dynpro Form component. while designing it in UIBB by adding Element TSTOCK_VL encountring a error and dump.
    Error: Could not find attribute WAERS and also dump showing below:
    Category               ABAP Programming Error
    Runtime Errors         UNCAUGHT_EXCEPTION
    Except.                CX_WD_CONTEXT
    ABAP Program           CL_WDR_CONTEXT_NODE_INFO======CP
    Application Component  BC-WD-ABA-RUN
    Date and Time          21.05.2014 00:13:32
    Short text
         An exception occurred that was not caught.
    What happened?
         The exception 'CX_WD_CONTEXT' was raised, but it was not caught anywhere along
         the call hierarchy.
         Since exceptions represent error situations and this error was not
         adequately responded to, the running ABAP program
          'CL_WDR_CONTEXT_NODE_INFO======CP' has to be
         terminated.
    Any help please.
    BR, Srihari

    Yes, since the release of the current segment is 45 and you are now in a ECC6 system you cannot cancel the release (because there is no ECC6 version). Just use the add version button to create a new version for ECC6. Once you have that you can add fields and set the release to ECC6.
    If you later on need to add more segements you can then cancel the release for your ECC6 segment and add the fields and set the release to ECC6 again (because you already have an ECC6 segment)
    Hope that explains it,
    Michael

  • Need to add more Fields to "List" Tile of MSA Opportunity Search Tileset.

    Hi Experts !
    We are trying to add more fields to the "List" Tile on the Opportunity Search Tileset to view additional information on the search result screen.Ex: Company Name, Product Description, Person Responsible & Channel Partner on Opportunity transaction should be displayed on the Search result screen.
    So far, with the help of Anchor modeling we tried adding the Opportunity BP (BOOPPBusinessPartner) Segment and (BOOPPProduct) Segment to the BOOpportunity Parent segment in the Opportunity_Write Bdoc.And, we added fields from BP & Product segment to the List tile by drag & drop.
    Upon Generating the changes, the system did NOT populate the data for the new fields.
    Please advise us where we are going wrong.
    Thanks & Regards,
    Jagan.

    Hi,
    the way you tried to add some more fields in a list tile is not working.
    In lists the data is not retrieved from Business objects/collections but from record sets which are fetched from the main segment of the underlying query BDoc (I guess sth like OPP_blabla_QUERY).
    Therefore what you could do is to enhance this query BDoc and add these tables by joining them to the opportunity header table. In this case you also need to specify exactly these segment field names in the property of the new list column fields.
    Much faster (but a little bit dirty) would be to use the row loaded2 event where you can calculate the values you want to display. In this case the controls would have to be unbound.
    The second version would cost a little bit more performance, but this depends from the data volume.
    Regards,
    Wolfhard

  • CRM 7.0 / IS-U: adding custom fields to Business agreement for replication

    Hello Experts!
    We're working on replication of custom fields from IS-U to CRM 7.0.
    Can you help me with clarification of my understanding of these questions..?
    1) CRM/IS-U mapping tables for buag_main:
    Business Agreement(BUAG_MAIN) is a BO in CRM that corresponds to CRM table CRMM_BUAG and to Contract account in IS-U table FKKVKP.
    Table FKKVKP were enhanced with some z-fields,
    so we are going to enhance corresponding CRM table CRMM_BUAG (or CRMM_BUAG_H) with that new fields..
    But we see that these CRM and IS-U tables have far not the same field structures..
    So, the question: Which crm and is-u tables i should look, enhance and replicate for Business agreement?
    2) Access to Business agreement with possibility to add custom field:
    I couldn't find in Web UI where i can directly edit profile of Business Agreement..
    I've found just access to assignment block "Business agreement" on Account's profile overview page..(Role ServicePRO; Account details).
    There I used AET to add custom field..but I faced with problem when the 1st popup appeared: there was no enhanced object "Business Agreement"..
    Also in role "Utilities IC Agent" i've found "business agreement" profile but there I don't see buttons for adding custom fields..
    So, the question is: Where I can access Business agreement profile to enhance it with custom fields for replication with IS-U?
    3) CRM/IS-U data exchange functions:
    I tend to use tcode CRMC_BUT_CALL_FU:
    for CRM inbound event of BUAG object  - FM CRM_BUAG_MWX_PROCESS_EXT_STRUC..(as template).
    Question: Am I right that it fits my requirement to replicate custom fields from IS-U to CRM?
    Please tell me if you need more information..
    Looking forward to your answers.
    Thank you a lot in advance!
    Kind regards,
    Evgenia

    Hi Gobi,
    Thank you for advice. But:
    I've created fields not by using AET - I used documentation that Nicolas suggested me above.
    I've enhanced tables and structures that were mentioned there with my z-fields for both sides (CRM and ERP).
    Also I looked CRMC_BUT_CALL_FU for CRM Inbound BUAG_MAIN - corresponding standard FMs are marked for call.
    Any ideas?
    Thanks in advance.
    BR,
    Evgenia

  • Adding new field in Monitor Shopping Cart

    Helll All,
    I have a requirement where I need to add a new field in the Search Criteria screen for Monitor Shopping Cart (item data).
    The new field needs to have a property so as to be able to add more than 1 value for it. It is just like Purchasing Group criteria present in the standard Shopping Cart Monitor screen.
    I have the structure BBPS_MON_SC_ITEM where there is a field PURCHASE_GROUP, which is like a range. I need to add one more field here with the same range structure so as to get values of my new screen field into it.
    Coming to my question........In which structure should I append this new field so as to get it in BBPS_MON_SC_ITEM? I have read the note 672960 and tried appending for Table Type fields but no success.
    I am working in SRM Version 5.
    Kindly help.
    Thank you.
    Johnson
    Message was edited by:
            Johnson Ittyerah

    Hi
    <u>See related links -></u>
    Re: Adding CUF fields in Monitor Shopping Cart Selection Screen
    Re: Error while viewing the SC via BBP_MON_SC
    Adding fields in shopping cart
    Do let me know.
    Regards
    - Atul

Maybe you are looking for