Adding people to a call

I am trying to add people to a call. Sometimes it won't show the add to group button or when I add them, the call wont go through. What to do?

Hi,
It seems to be the expected behavior. For Lync Server side, there is no way to add ring back tone when adding people to a group call.
Here is a similar case may help you:
https://social.technet.microsoft.com/Forums/en-US/0e1be655-bdaa-4268-b843-8aa652855dfc/conference-call-no-ringback?forum=lyncvoice
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Similar Messages

  • Hi! My phone speaker is not working, so I cant hear people when they call me. I bought my iphone 4s on February 2013 at the Grand Central Apple Store. I would like to know if I can take it to an Apple Store in Spain so they can fix it or change it. Thanks

    Hi! My phone speaker is not working, so I cant hear people when they call me. I bought my iphone 4s con February 2013 in the Grand Central (NYC - USA) Apple Store. I would like to know if I can take it to an Apple Store in Spain so they can fix it or change it. Or I need to find a way to take it to the US, where I bought it.
    Thanks!!!

    You will need to return the phone to the US. iPhone warranty is only good in the country of purchase, with the exception of the EU.

  • How do i remove the option of adding people to my contact automatically that i reply to in my email

    How do I remove the option of automatically adding people I reply to, to my conact list in email?

    You can't. Sorry.

  • Does anyone know how to facetime 2 people on 1 call.

    I asked a question to an expert on a live chat. I asked can you facetime 2 people on 1 call. She said yes, but she couldn't tell me.

    Whoever you were "chatting" with was incorrect. You can only facetime with one person at a time.

  • My ipad be stolen....if got people see pls call me soon....Serial Number:DY*******VGK

    My ipad be stolen....if got people see pls call me soon....Serial Number:DY*******VGK......FROM MALAYSIA...
    <Edited By Host>

    If you had Find My iPad enabled on it then you could try locating it either via http://icloud.com on a computer or Find My iPhone / Find My iPad on another device - but that will only work if it's connected to a network and the device hasn't already been wiped and/or Find My iPad disabled on it.
    If it was stolen then you should report it to the police and you should contact your carrier. You should also change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc.

  • After adding an asynchronus seq call, can't restart if paused

    I added an asynchronus seq call to my working sequence, but now if TestStand pauses for any reason, the Restart arrow won't light up.  I have to kill the asynchronus vi for the Restart arrow to light up.  Any ideas why this is happening?  Thanks.

    Let me explain in more detail.  I have a mostly working sequence, and added a "Run VI Asynchronously" step.  This launches the VI in a new thread, while the rest of the sequence continues running as before.  But now if I pause to look at an error (I'm still debugging the test sequence), the restart button will not light up and I can't continue.  This should not be the case, since the thread I've stopped is the one I want to continue, not the new thread.  This also doesn't happen on my co-workers test set when he does the same thing, i.e. run a new thread.
    More background info, in case this helps, the Asynchronous VI is running on the same PC, but calls a vi on a remote PC.  Would it matter if I changed it to an Step that called the VI remotely in a new thread?  Logically this is the same thing, but maybe it executes a little differently?  Thanks for your help.

  • Adding People to Conversation

    One of the girls in my office has been having trouble with adding people to conversations.  When she clicks the Add People button, not all available contacts are displayed in the list to add.  Her contacts do show in her main skype window and she's able to start a conversation with any of them.  There seems to only be an issue when she is trying to add people to an existing conversation.  Any ideas on what might be causing this or how we can correct it?

    There should be some security preference at your settings that needs to be activated to avoid this situation.

  • I bought an iPhone from mobile and I can't hear people when they call me unless their on speaker do I have warranty for that

    I bought an iPhone from mobile and I can't hear people when they call me unless their on speaker do I have warranty for that

    You can check your warranty status by entering the iPhone serial number here:
    https://selfsolve.apple.com/agreementWarrantyDynamic.do
    Be sure to make an appointment at the Genius Bar before taking your iPhone in
    as per deggie above.

  • How many people can be added to one conference call using verizon?

    How many contacts can be used in one conference call?

    Thank you, Meg.  Appreciate the quick response.
    Jim

  • Adding documents to CUCCX call center to be used in script

    Hello,
         I'm looking to create a "waiting times" prompt which will alert people how long they may have to wait for service.  We have another system outside of CUCCX that has these stats and our programmer has suggested placing an integer into a flat file that can be uploaded to the CUCCX server which can in turn be read, turned into an integer, and then have some "if" logic applied to it.  So, my question is;
    1) How can I set up a user account in CUCCX that will allow for write access to an external user?
    2) Where is the default directory that this document would be uploaded to?
    Any help is appreciated, thank you.

    I'm not sure what I said to confuse the point, but UCCX *can* access a web server via HTTP.  That's what I linked to in the Data Sheet.  Also, don't get too hung up on the XML part, you can easily read a plain text file.
    It only takes a single step to read the data.  Here's an example:
    Set http_response = URL[http://myinternalserver.company.com/lobby99/waittime/]
    Where http_response is a String.
    And depending on how you want to inform the caller, the next part could be as simple as this:
    Play Prompt (--Triggering Contact--, P[the_wait_time_is] + N[http_response] + SP[gen/time/minutes])
    Of course you may prefer time ranges like this:
    Set wait_time = Interger.parseInt(http_response)If (wait_time >= 60)  True    Play Prompt (--Triggering Contact--, P[one_hour_wait_or_more])    Goto Main Menu  FalseIf (wait_time >= 30)  True    Play Prompt (--Triggering Contact--, P[half_hour_wait_or_more])    Goto Main Menu  FalseIf (wait_time >= 15)  True    Play Prompt (--Triggering Contact--, P[quarter_hour_wait_or_more])    Goto Main Menu  FalsePlay Prompt (--Triggering Contact--, P[less_than_15_minutes])Goto Main Menu
    Where wait_time is an int.
    Be sure to have error checking/handling in place too.  I didn't include that.
    Anthony Holloway
    Please use the star ratings to help drive great content to the top of searches.

  • Bulk adding IP Phones in Call Manager 5.1

    Does anyone have experience adding end users in Bulk to Call Manager 5.1? If so can you show me the CSV file format for this? We will be adding over three hundred new IP phones to our call manager and we have all the Mac addresses already, we just need to create all of the phones and directory numbers in Call Manager.
    Any guidance would be great.
    Thank you.
    Rgds,
    Vicky

    Hello and thank you for your post. Unfortunately I have only just now had a chance to look at your post. Can you please renew my access to this download??
    Please get back to me. Thank you again.
    Rgds,
    Vicky

  • Adding People to an Organization

    In the address book I can create a new "Organization". However, when I click the "People" tab (while creating or editing the organization) I see no way to add people/contacts to the organization.

    Well, that does seem to work. Seems like a strange design though. Seems like you would create the organization and then have an "Add" button on the organization's "People" tab, similar to how you add people to a "group".
    I also noticed that if you edit a person, go to "Advanced", and type something in the "Organization" field (which is how I am interpreting your suggestion), it will actually create that organization if it doesn't already exist. So, make a slight typo when adding an organization name to an existing person and you create a 2nd organization...
    Again, seems like a very strange design. But THANK YOU for your reply! At least I have a way to make it work now.
    Originally Posted by dzanre
    dietzgw wrote:
    > In the address book I can create a new "Organization". However, when I click
    > the "People" tab (while creating or editing the organization) I see no way to
    > add people/contacts to the organization.
    In my experience, it happens from the other direction. I.e., if you edit people
    and put the organization name in the organization field, they will show up in
    the organization object.
    Danita
    Novell Knowledge Partner
    Moving GroupWise to Linux?
    Shopping Cart

  • Can't see other people in group calls on iPhone4S

    I can't see other people I'm group calls on my mobile device and they can't see me. Is this just my phone or is it skype.

    Hi and welcome to the Skype Community,
    Group video calling is currently only supported on Skype for desktop and Xbox One. See here: https://support.skype.com/en/faq/FA10613/what-do-i​-need-to-make-a-group-video-call
    Follow the latest Skype Community News
    ↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

  • Lync client show contact is adding audio and the "Call was not completed"

    the incoming call show is adding audio, the call can't pick up. 
    User is using Lync certificated headset. Others incoming calls is able to pick up.
    Any idea?
    Thanks.

    Hi,
    To narrow down the issue, please test the issue with this issued Lync account on other computer Lync client (use the issued headset, then change to other well-worked headset), check if the issue still happen or not.
    If the issue not happen on other Lync client, it can be the issue of Lync user profile, please try to delete the user profile with the following path:
    %UserProfile%\AppData\Local\Microsoft\Office\15.0\Lync
    Also delete the Lync user configuration information in registry with the following path:
    HKCU\Software\Microsoft\Office\15.0\Lync\[email protected]
    If the issue also happen on other Lync clients, it can be the issue of the Lync account itself, please try to disable it on Lync Server side, and then enable it again to test the issue.
    Best Regards,
    Eason Huang
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Eason Huang
    TechNet Community Support

  • Automated , after adding people to DC....

    Hello all,
    I have now a serval people employed,
    And now we are groing, we have serval OU's with dffrent staf's and functions.
    Now they have all a private_folder, central folder where they can put all the documents for each other to see/
    But now my question is,
    How can i automate this, so when people are added to the DC they al get a new private_folder and have acces to the central folder automated? I tought first of VBscripts, but cant find nothing about it.
    can somebody help me out here????

    is this a little bit the same as in a situation like.
    You have already all the shared_folders, but you only add the new person to a security group where he haves the permissions to do what it supposed to do in that security groep? Is there a possible way in AD-DS that when you choose a groep there he automated
     makes a shared_path or is this the same thing,.,. ????

Maybe you are looking for