Adding portal to an existing domain

Hi I have a JSP/Servlet web applicatin and
I want to make it a portal application.
I was following Weblogic Portal Development
Guide 7.0. I found the section
"Adding portal to an existing domain" is very incomplete
or confusing and I cannot do it. Is there any better document
for this?

Judging from the dates between these two entrries and no answers, I'd
guess that there isn't anyone from BEA monitoring this group? I am in a
similar situation. What I want to understand is how one can "portalize" an
existing web app. I understand there are implications to some of the
presentation, but specifically, I want to deploy a Servlet based app that
uses EJBs and deploy this as an EAR in the same domain as the portal
(perhaps under the /applications directory). I can make everything work
except the webflow where I reference the Servlet.
Specifically, I have a presentation page that is defined to be my servlet.
When I try to build a webflow URL referencing this event, I get errors from
the portal because it presumes it may be located somewhere else or in a
different namespace. It leads me to believe that I can't reference a
servlet unless it is under the /framework or /portal directories under the
portal web-app directory. I'm convinced there must be a way to reference
other web components that aren't specifically part of the portal web app,
but can't figure out how to propagate the webflow element to the actual
servlet I want.
Any ideas from the community at large? This must be something other
people have wrestled with since I can't imagine that only new apps will be
put into portals.
Thanks,
Mark
"Sara" <[email protected]> wrote in message
news:[email protected]...
>
I'm facing similar problems too. I have an ear file in an existing domainthat
I want to use to create a portal. The documentation on this is quiteconfusing
and the steps require so many manual steps that it is bound to beerror-prone.
What's BEA's recommended way to expose an existing Weblogic application asa portal
Thanks in advance
-Sara
"David Zhang" <[email protected]> wrote:
Hi I have a JSP/Servlet web applicatin and
I want to make it a portal application.
I was following Weblogic Portal Development
Guide 7.0. I found the section
"Adding portal to an existing domain" is very incomplete
or confusing and I cannot do it. Is there any better document
for this?

Similar Messages

Adding DC to an existing domain and forest

Hi, I have an existing forest and domain. Its roles are: Domain Services and DNS. We have a branch office and setup a new server. In this new server, we set this as well to be the DC of that remote site and added a third role which is DHCP for their own
network. We added another server as backup of this branch office. In the process of adding the role, I accidentally checked both domain controller and global catalog. I remember that both of this cannot be GC or is it ok for both to be GC besides DC?
Thanks
Jeff

Hello,
there is no problem having ALL DCs to be GC also.
Don't forget to configure AD sites and services with the new subnets and also the sites containing the correct DCs.
https://technet.microsoft.com/en-us/library/cc730868.aspx?f=255&MSPPError=-2147217396
http://blogs.technet.com/b/askds/archive/2011/04/29/sites-sites-everywhere.aspx
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Adding a domain controller to an existing Domain inside server 2012

I have created a domain contoso.com with an administrator account.Then i moved to 2nd server which i want to add in this existing domain.Being logged in at the 2nd server with administrator account, i added the role of ADDS and then i tried to promote
this to DC.While do so, i selected the option "Add a domain controller to existing domain".When i finally recah this the Installation wizard , it shows like "creating NDTS settings objects fo this ADDS on remote ADDC(domain name)..........This
page remains in progress for ages and process never finishes.
When i check at the first(main domain) , there is no NDTS object for the added DC although i can see the server but nothing inside it.NDTS object should be there.Y
1) NDTS object is not created ?
2) The process is taking hours?
Both can ping each other
Regards,
Fawad

1. IP of DNS setting on second server points to first DC.
2. Add second computer to domain. Make sure that second server is part of AD (member).
3. Add role ADDS on second server that is member of AD.
In summary: You should add second server to domain first before promoting it to DC role.
Regards
Milos

Added existing domain to the parent domain and now permission not inheriting on the child domain

Hi Friends
There was a existing Domain but we bought the company and make that Domain as a child domain of our Domain, problem is that users of Parent domain does not have access to the child domain. permissions are not inheriting from parent domain to child domain.
for e.g i created user on the parent domain i cant even login to the machine in other domain or access the resources which are on the child domain.

Simply delegate the permissions you want to grant so that users from the root domain can have access to resources in the child domain.
As an example, you make users from the parent domain login to computers from the child domain using
Allow logon locally group policy: http://technet.microsoft.com/en-us/library/cc756809%28v=ws.10%29.aspx
You can also make them able to RDP the computers if you add them to Remote Desktop Users
group. This could be done by Restricted Groups Group Policy.
So, for security reasons and depending on your current configuration, it is normal that users from the root domain might not have by default access to resources in the child domain. This could be fixed by doing the proper delegation.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Adding Index server to existing farm, "Server Farm Product and Patch Status" returned 34 Missing Locally required products and patches

Once I connected my new server to my farm's config db, it returned all of the following missing locally. I stripped out any redundancies and Headings, and I'm left with 43. I'm looking for a efficient strategy. Should I start with the lowest version number
and work my way up? Current DB version is 14.0.7015.1000. IIRC, SP2 is cumulative, so can I ignore the first two (SP1 and Hotfix), install SP2, and then the Language packs and etc on top?
Sorted by version:
Microsoft SharePoint 2010 Service Pack 1 (SP1) (14.0.6029.1000)
Hotfix for Microsoft SharePoint Server 2010 (KB2775353) 64-Bit Edition (14.0.6105.5000)
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition (14.0.7015.1000)
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition (14.0.7015.1000)
Microsoft Office Server Proof (English) 2010 (14.0.7015.1000)
Microsoft Office Server Proof (French) 2010 (14.0.7015.1000)
Microsoft Office Server Proof (Russian) 2010 (14.0.7015.1000)
Microsoft Office Server Proof (Spanish) 2010 (14.0.7015.1000)
Microsoft SharePoint Portal (14.0.7015.1000)
Microsoft User Profiles (14.0.7015.1000)
Microsoft SharePoint Portal English Language Pack (14.0.7015.1000)
Microsoft Shared Components (14.0.7015.1000)
Microsoft Shared Coms English Language Pack (14.0.7015.1000)
Microsoft Slide Library (14.0.7015.1000)
Microsoft InfoPath Forms Services (14.0.7015.1000)
Microsoft InfoPath Form Services English Language Pack (14.0.7015.1000)
Microsoft Word Server (14.0.7015.1000)
Microsoft Word Server English Language Pack (14.0.7015.1000)
PerformancePoint Services for SharePoint (14.0.7015.1000)
PerformancePoint Services in SharePoint 1033 Language Pack (14.0.7015.1000)
Microsoft Visio Services English Language Pack (14.0.7015.1000)
Microsoft Visio Services Web Front End Components (14.0.7015.1000)
Microsoft Excel Services Components (14.0.7015.1000)
Microsoft Document Lifecycle Components (14.0.7015.1000)
Microsoft Excel Services English Language Pack (14.0.7015.1000)
Microsoft Search Server 2010 Core (14.0.7015.1000)
Microsoft Search Server 2010 English Language Pack (14.0.7015.1000)
Microsoft Document Lifecycle Components English Language Pack (14.0.7015.1000)
Microsoft Slide Library English Language Pack (14.0.7015.1000)
Microsoft SharePoint Server 2010 (14.0.7015.1000)
Microsoft Access Services Server (14.0.7015.1000)
Microsoft Access Services English Language Pack (14.0.7015.1000)
Microsoft Web Analytics Web Front End Components (14.0.7015.1000)
Microsoft Web Analytics English Language Pack (14.0.7015.1000)
Microsoft Excel Mobile Viewer Components (14.0.7015.1000)
Recommendations?
Thanks,
Scott

Thanks guys. I was able to get through all of the patches except for
Language Pack for SharePoint, Project Server and Office Web Apps 2010 - English missing locally
Language Pack for SharePoint, Project Server and Office Web Apps 2010 -
Spanish/Español missing locally
This was my process:
Config Wizard:
Adding Index server to existing farm, "Server Farm Product and Patch Status" returned 34 Missing Locally required products and patches.
SKIP installing the following two, as SP2 is cumulative
Microsoft SharePoint 2010 Service Pack 1 (SP1) (14.0.6029.1000) (officeserver2010sp1-kb2460045-x64-fullfile-en-us.exe)
Hotfix for Microsoft SharePoint Server 2010 (KB2775353) 64-Bit Edition (14.0.6105.5000)
install SP2 oserversp2010-kb2687453-fullfile-x64-en-us.exe
install oslpksp2010-kb2687462-fullfile-x64-en-us.exe
Got "There are no products affected by this package installed on this system."
SO!
Uninstalled Sharepoint 2010 Server
WIll try to install again, without skipping #2, and reorder installation of oslpksp2010-kb2687462-fullfile-x64-en-us.exe
Retry (the long way):
Run SharePointServer.exe, get Missing Locally...
Install oslpksp2010-kb2687462-fullfile-x64-en-us.exe SUCCESSFUL
Install officeserver2010sp1-kb2460045-x64-fullfile-en-us.exe SUCCESSFUL
Reboot
Install oserversp2010-kb2687453-fullfile-x64-en-us.exe SUCCESSFUL
Rerun Config
STILL MISSING
Download oslpksp2010-kb2687462-fullfile-x64-es-es.exe, run, "there are no products affected..."
Uninstall.
Re-retried, only got through the first couple:
Run SharePointServer.exe, get Missing Locally...
Install SP1 officeserver2010sp1-kb2460045-x64-fullfile-en-us.exe, SUCCESSFUL
Install English Lang Pack oslpksp2010-kb2687462-fullfile-x64-en-us.exe, "There are no products affected by this package installed on this system."
Install Spanish Lang Pack oslpksp2010-kb2687462-fullfile-x64-es-es.exe,
Install SP2 oserversp2010-kb2687453-fullfile-x64-en-us.exe, run Config Wizard
I'm now downloading 462150_intl_x64_zip.exe, going to try and install it as step three.
Any suggestions greatly appreciated.
Thanks,
Scott

Can't add Server 2012 to existing domain

I'm getting this error:
"Verification of replica failed. The forest functional level is Windows 2000. To install Windows Server 2012 domain or domain controller, the forest functional level must be Windows Server 2003."
My forest level is set at 2008R2, per AD Domains and Trusts (on both the 08 servers and 2012). The forest was set at 2003 before, so I demoted the old 2003 server and raised it to 2008 with no luck, then went ahead and went to 2008R2.
The 2012 server (clean install, no upgrades) is already a member of the domain.
adprep /forestprep reports "forest wide information has already been updated"
Connectivity seems to be fine (ping, no firewalls) between the 2 08R2 DCs and the new 2012 server. Weird thing is all the AD tools are installed in 2012, and I can even create new domain users from it.

Hello,
You dont need manual schema upgarde for adding a new windows 2012 Domain controller. That is integrated with dcpromotion. Also you dont required the DCPROMO.
Set DFL & FFL minimum 2003.
See the below link for adding a 2012 DC for an existing domain.
Install a Replica Windows Server 2012 Domain Controller in an Existing Domain (Level 200)
As with previous versions of Windows Server, automated domain preparation for domain controllers that run Windows server 2012 does not run GPPREP. Run
adprep.exe /gpprep manually for all domains that were not previously prepared for Windows Server 2003, Windows Server 2008, or Windows Server 2008 R2. You should run GPPrep only once in the history of a domain, not with every upgrade. Adprep.exe
does not run /gpprep automatically because its operation can cause all files and folders in the SYSVOL folder to re-replicate on all domain controllers.
Still if you are facing issue. please upload the below outputs in skydrive & share us the link.
repadmin /replsummary * >> repl.txt
repadmin /showreps /v >> showreps.txt
DCDIAG /V /C /D /E /s:dcname >> dcdiag-DCS.txt
dcdiag /e /v /test:dns >> dns.txt
ipconfig /all >> dcip.txt
Regards
Biswajit Biswas
My
Blogs|TechnetWiki
Ninja
Best regards Biswajit Biswas Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, MCTS, Enterprise Admin

Creating new Domain by Copying the existing domain

Hi,
Is there any way to create a new domain by copying the already existing domain directory and pasting it to another directory in same machine or different machine.
Can anyone suggest me the configuration file that needs to be updated for new domain name.
Thanks
Harish
Edited by: user10833531 on Dec 2, 2009 7:52 AM

When you mention "Before posting on forum I have tried this option. I tried again but no luck." do you mean you tried pack/unpack or template approach and this did not work. Or did you just copied domain folder and renamed and start the new domain and you got errors. Copying domain may not work 100% (not in the long run). But pack/unpack or template approach should work pretty much without any errors.
As mentioned, I would recommend template approach or pack/unpack. You can provide the internal details and risk factors involved with hard disk copy of domain folder and renaming approach to the client. If domain copy approach works, then bea/oracle would not have come up with approaches like pack/unpack or template approach at all in the very first place. Copying domain folder and renaming may still work, unless you do all regression testing that includes cluster scenario also and all usecases.
I would still recommend for pack/unpack or template approach to copy any existing domains.
Just incase if your domain is like Portal Domain and if you deploy portal applications on this domain, then copying domain will just not work. Every domain is very tightly coupled with ldap files and db tables for any Security Visitor Entitlements and Delegated Admin roles. If its pure weblogic server application, these things will not come into picture. But for Portal, we do have something called Propagation Tool to migrate portal app from one domain to other domain. But still the domain cannot be copied and renamed.
HTH
Ravi Jegga

CAN ANYONE PLEASE HELP WITH ADDING EMAILS OF MY OWN DOMAIN

Hi there
I tried adding my work emails (Company Domain from Sites and Stores) here but its not letting me do that.
I called Telstra they added from there end and is still not working.
They send me service books twice i received nothing and they said i might need to delete existing service books which i cant find on my handset.
The emails i am trying to add is currently working on my BOLD it is not on Z10. I cant even manually add them on the phone. Firstly it ask for email Id and then password and then says The email provider is not trustworthy you like to proceed i click yes to go ahead after 1 minute it goes Make sure your email address and password are entered correctly.
Could anyone please help or may have got the same problem.
Do i need to have Enterprise server? On Bold and Torch it just worked fineeee

Hi,
Check the below article on how to configure email ID in Z10. It's not must requirement that you need enterprise server. However, you must have POP3 or IMAP (for personal) enabled email services. If you want to add enterprise email then it must support active sync.
How to add email, contacts, calendar and social networking accounts on a BlackBerry 10 smartphone
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Adding JAVA / ABAP srvers into Domain

Dear All,
Greetings...
we have installed Nw7.0EHP1 in 2 different systems (ABAP/JAVA) in work group.
Is it possible to add those systems into Domain ?
if possible, do i need to change any configuraion ? (like, ABAP, JAVA connections)
while configuring ABAP/JAVA integration, we have maintained "icm/host_name_full" parameter with including Domain name (though systems were not in Domain)
Now we able to access portal like"http://<host_name>.<domain.com>:50000/irj/portal"
But, when we trying to access some tabs in portal, the screen reverting to new page and displaying CANNOT FIND SERVER (address bar showing same details correctly which i logged in initially).
Possible inputs from my side:
ABAP SID : ABC (192.168.22.40), JAVA SID: XYZ (192.168.115.36)
Suggest me, how to proceed by adding these 2 systems into Domain and is there any changes shoud required ?
Regards,
Nagarjuna Gorantla

> Suggest me, how to proceed by adding these 2 systems into Domain and is there any changes shoud required ?
A SAP system runs under a specific user - SAPService<SID>. This user has a unique UID assigned on the local machine. If you put the system into the domain, that UID will change and all settings are invalidated; this includes registry permissions, permissions on files and user assignments.
For this reason you must do a homogeneous system copy to put the system into the domain:
Note 1233320 - Domain migration for SAP system
Markus

Add existing Domain Tree into a forest

I see that there is the option in DCPROMO to add a CHILD or a DOMAIN TREE ROOT.
I have two existing domains, each has a root domain with two child domains. I have a need to join the two forests with one forest added to the other as a DOMAIN TREE.
Using DCPROMO I see that I could build the Forest structure from scratch. Is there anyway to join the existing FOREST ROOT as the DOMAIN TREE ROOT and retain all existing data in both forests?
Tom!

Using DCPROMO I see that I could build the Forest structure from scratch. Is there anyway to join the existing FOREST ROOT as the DOMAIN TREE ROOT and retain all existing data in both forests?
Unfortunately No. You need to establish trusts between your forests and start migrating resources to your destination domain.
ADMT Series - 1. Preparing Active Directory
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

Issue in adding Space to the existing Virtual Machine from added repository

Hi,
I'm facing issue in adding Space to the existing Virtual Machine (Guest OS) from added repository.
Environment details :
VM Server : /OVS => 130GB
/OVS/935970F2CC2D4B4391701397517F1001/ => 512 GB
Things I have done :
•     I created a VM (Guest OS) in the VM Server with 120 GB
•     After creating the VM (Guest OS) , When I tried adding a VIRTUAL DISK of size 150 GB , I got an error “Maximum available Disk space is only 10GB”.
My query :
•     Will I be able to add space to Existing VM from the added Repository ( /OVS/935970F2CC2D4B4391701397517F1001/ ) , whose system.img is stored in path /OVS/running_pool/34_rhel/ .
Kindly help me out in this.
Thanks in advance.
-- Sri

Hi all,
I checked with Oracle on the above and got the info currently , the we can utilise only the space available in the existing repo and cannot extend to additional repo.
Work around is : Clone it to the other repo , or Use Symbolic link .
Thanks,
Sri.

How to make multiple portals work in same domain (wlp 9.2)? IMPORTANT !!!

We have domain where one portal application is in production now and other portal application have to deploy in the same domain.
The first one is using global scoped DataSources and the new one is using application scoped because they have to use own schemas in the database.
Also Group and User/role management have to work application scoped, meaning that in one's portal admin console shows only users/groups/roles to that portal.
How do I do this and what is the optional/best practises to do this kind of configuration, configure and deploy multiple portals in the same domain ?
I get so far that I make new SQLAuthenticator and XCAMLRoleMapper to the new portal but when the LDAP and database goes out of sync and I delete P13N -tables and LDAP, server start creates only to the first portal database the needed rows and delegated admin management doesn't work in the new one at all.
I have read all bea's documents related to JDBC - application scoping, deploying, security P13N and I can't get enough information from it to make this work.
Thanks !

You may want to ask in the weblogic.developer.interest.portal forum.
I don't believe that group and user/role management can be application
scoped.
<Tanja Puurula> wrote in message news:[email protected]..
We have domain where one portal application is in production now and other
portal application have to deploy in the same domain.
The first one is using global scoped DataSources and the new one is using
application scoped because they have to use own schemas in the database.
Also Group and User/role management have to work application scoped, meaning
that in one's portal admin console shows only users/groups/roles to that
portal.
How do I do this and what is the optional/best practises to do this kind of
configuration, configure and deploy multiple portals in the same domain ?
I get so far that I make new SQLAuthenticator and XCAMLRoleMapper to the new
portal but when the LDAP and database goes out of sync and I delete
P13N -tables and LDAP, server start creates only to the first portal
database the needed rows and delegated admin management doesn't work in the
new one at all.
I have read all bea's documents related to JDBC - application scoping,
deploying, security P13N and I can't get enough information from it to make
this work.
Thanks !

Creating a new portal in a new domain - no baseportal template

Using Weblogic Platform 7.0 on Solaris 8, I'm trying to work through the
procedure at http://edocs.bea.com/wlp/docs70/dev/newdom.htm "Creating a
new portal in a new domain."
Step 1 "Creating the new domain" goes fine. I can start the portal
server using WL/user_projects/domainname/startPortal.sh and connect to
its console at http://server:7501/console.
In Step 2 "Create the new portal", I start up ebcc.sh, open the project,
and run the Portal Wizard. I get as far as "Portal Templates". The
portal templates comes up empty; there is no baseportal icon, and I
can't go any further.
What's wrong?!?!
Larry Mulcahy [email protected] [email protected]
http://www.nyx.net/~lmulcahy/ http://www.frii.net/~lmulcahy/
PGP key at http://wwwkeys.pgp.net:11371/pks/lookup?op=get&search=0xE6F89645
"I like Linux, but I don't have any part of my body pierced." Roland Latour

Michael -
See this document. It should help you out.
http://edocs.bea.com/platform/docs81/confgwiz/startcw.html#1049231
Regards,
Kunal
"Michael Meyer" <[email protected]> wrote:
hi,
I am running BEA Weblogic Portal 8.1 on a linux machine without any grafical
user interface. On Windows I was using the 'Configuration Wizard' to
create
a new domain. Can someone please tell me, how I can create a new domain
without an grafical user interface? Are there any command line tools?
Michael

How to Create a new RODC in an existing domain

Hello everyone,
Is anybody could help me with DCPROMO install on RODC 2008 R2 ? I wanna join to an Existing forest. "Create a new RODC in an existing domain". If you could write me step by step cmd would be nice.
Thank's

by cmd you mean from command promt?
If, use something like this:
dcpromo /unattend:c:\ua.txt
The file should contain at least this info:
[DCInstall]
ReplicaOrNewDomain=ReadOnlyReplica
ReplicaDomainDNSName=my.domain.com
SiteName=yoursite
InstallDNS=Yes
ConfirmGc=Yes
CreateDNSDelegation=yes
UserDomain=my.domain.com
UserName=user
Password=P"ssword
SafeModeAdminPassword=P"ssword123
CriticalReplicationOnly=Yes
RebootOnCompletion=Yes
Best Regards,
Jesper Vindum, Denmark
Systems Administrator
Help the forum: Monitor(alert) your threads and vote helpful replies or mark them as answer, if it helps solving your problem.

How to install and add Enterprise Portal over an existing ECC server

Hi Guys
We have already installed the ERP package (ECC) and we have enough memory and diskspace on the server and there we are considering installing Enterprise Portal over the existing server so that we can use both ECC and EP.
How can we do this? What are the steps to do it? I want to make sure that we don't corrupt the existing SAP stuff on the server, but just want to install enterprise portal .
Your comments or suggestions will be highly appreciated.
Thanks
Ram

just went ahead and installed from scratch

Adding portal to an existing domain

Similar Messages

Maybe you are looking for