Adding Users and Phones to UC systems

What if there was an easy way to add a phone and user across the Cisco UC Suite of products (UCCM, Unity Connection, Presence, Contact Center, Meetingplace Express etc...) ? This process currently can take a long time and visits to many different administrative interfaces. What if it could be done in only a few minutes from a single interface? What could an application that does this be worth to either a Cisco Partner, or to the End Customer?
We will be launching such an application and are looking to input to make sure we are not missing the mark.
What features would people like to see in such an application?
What are people willing to pay for such an application?
What products would be the most helpful to have such an application for?
Thanks for your input.
Aaron Archambault
[email protected]
IPNetVoice

Geiger
This the dialogue you're referring to?
Uploaded with plasq's Skitch!
Is the Okay button highlighted when the sheet descends? At any point in the process?
Regards
TD

Similar Messages

I successfully deleted a user from my MacBook through the Users and Groups window in System Preferences. But now I cannot close the lock in the bottom left corner of the box. When I click on it, I briefly see a word that I think says "reauthorizing" but

I successfully deleted a user from my MacBook through the Users and Groups window in System Preferences. But now I cannot close the lock in the bottom left corner of the box. When I click on it, I briefly see a word that I think says "reauthorizing" but the word flashes too quickly to tell for sure.

If you are admin.
Try restarting your Mac.

Is there a howto for programmatically adding users and groups

Hi. I'm using WLS 7.0 SP2, and I'm trying to find docs/howtos to
programmatically add users and add them to groups. But unfortunately I must
be looking in the wrong places, cause I can't seem to find any straight
forward code. I've found some in a book called "J2EE Applications and BEA
Weblogic Server" (the white book with the race car on the front) but that
code is deprecated and for wls 6.1. I would like to find something as
straight forward as they have in their security section.
Can anyone help? Thank you in advance.

"Flip" <!no_spam![email protected]> wrote in message
news:[email protected]..
Hi. I'm using WLS 7.0 SP2, and I'm trying to find docs/howtos to
programmatically add users and add them to groups. But unfortunately Imust
be looking in the wrong places, cause I can't seem to find any straight
forward code. I've found some in a book called "J2EE Applications and BEA
Weblogic Server" (the white book with the race car on the front) but that
code is deprecated and for wls 6.1. I would like to find something as
straight forward as they have in their security section.
Can anyone help? Thank you in advance.
See the UserEditor and GroupEditor MBeans documentation. There have also
been some
posts in this news group with example code.
http://e-docs.bea.com/wls/docs81/javadocs/weblogic/management/security/authe
ntication/UserEditorMBean.html
>

Adding Tablet and Phone

Hi all,
I just finished with the desktop version of my website. When I try to add a tablet and phone version to the website, (I select all 3: copy site plan, copy page attributes, copy browsers Fill), the contents didn't copy over.
Did I do something wrong or MUSE suppose to work that way?
If MUSE suppose to work that way, what's the easiest way for me to transfer my desktop content over to Tablet and Phone.
Thx in advance...
-Aa

This is normal. Refer to the following article that explains how it works - http://helpx.adobe.com/muse/tutorials/creating-mobile-layout-designs-muse.html#id_30972.
Relevant excerpt is as under.
In a real-word website example, a desktop site may contain many additional pages with text and image content that may not be applicable to visitors using a handset. Before creating a mobile layout from an existing desktop design, spend some time imagining the use cases for mobile visitors. Be aware that if you try to display all of that desktop content on a small device, it can become unmanageable and difficult for visitors to navigate. One of the skills you gain as you begin designing sites for tablets and smartphones is the ability to convey useful information that is easy to read and interact with on a touch screen.
Thanks,
Vinayak

Adding users to groups

Hi,
can any one share documents/resources pertaining to how to create sap user groups in BOE.
how to add groups to users.
how to import sap users.
etc

Hi,
You can find the product documentation here:
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000713358&_SCENARIO=01100035870000000202&
Specifically, go to the "Integration for SAP Solutions" section and take a look at the Installation and Administration guide:
https://websmp210.sap-ag.de/~sapidb/011000358700000559912010E/xi31_sp3_bip_sap_inst_en.pdf
As far as adding users and groups to the system, this is down through the CMC. The Business Objects Enterprise Administrators guide should help you with these tasks:
http://help.sap.com/businessobject/product_guides/boexir31SP3/en/xi31_sp3_bip_admin_en.pdf
To add users/groups to the BOE system, you have to go into the CMC/Authentication section and click on the SAP tab. In here, you configure your SAP system information and add the groups that you wish to import into BOE. Once you add the groups through here, the user accounts and groups will be mapped in to the Users and Groups section of the CMC. From here, you can treat them like any other group in the system.
You add users to the SAP groups the same way you would for BW or any other SAP product. If a new user is added to an SAP group that is imported into BOE, then that user will be able to logon to the BOE system.
We also have many notes on these subjects.
thanks
Jonathan

No Start Menu, removed and added User Account then no "Built In" Apps - Build 1049

So quick history, was having problem with start menu not working under build 1044 for the second user I'd added to the machine (Microsoft account). Rebuilt using "Remove everything and reinstall windows". Seemed to resolve the problem for the newly
added user and was still working under the original user (also Microsoft Account). Then along came build 1049 and now the same start menu issue occurred for the original user account. So, as both were setup as admins, removed the original
user account, restarted, checked all data removed and added the account again.
First attempt added the account as a local account then added the Microsoft account after login, result = start menu working but no "built in" apps (store beta, insider app etc).
So removed account again and added again, this time using Microsoft account immediately, logged in and exactly the same result.
Any ideas how to resolve?

You cannot use the Start Menu logging in as anything that would be in the BUILTIN\administrator group on the computer. I had the same problem when I added the machine to a domain, thus domain admins is in the BUILTIN\Administrator group.
The reason being that the Windows 10 Start Menu is an appxpackage, and you can't run appxpackages using the built-in administrator account. As is the case for example with Windows Store. It doesn't however give you a warning message, you
just click on the windows button and nothing happens.
This is just total madness imv. It kind of made sense when all the appxpackages where apps, but now they include parts of the OS, the OS is essentially non-functional when you log in using anything in the BUILTIN\ administrator group.
If you really want to blow your mind, go into PowerShell and run the command: get-appxpackage|remove-appxpackage
If you run that on Windows 8.1 it will remove all the bloatware apps for the logged on user. Run it in Windows 10 and it removes various parts of the OS for that user as well, such as the Start Menu!

Problem in getting Portal Mapped user and password in Web Dynpro iView

I am developing a webdynpro iview.My app need to read mapped user and password form a system in Portal runtime.
I used the following codes in my Web Dynpro java program:
     IWDClientUser user = WDClientUser.getCurrentUser();
     IUser iuser = user.getSAPUser();
     IUserMappingService iums = (IUserMappingService)WDPortalUtils.getServiceReference(IUserMappingService.KEY );
//     IUserMappingService iums = (IUserMappingService)
//     PortalRuntime.getRuntimeResources().getService(IUserMappingService.KEY);
     IUserMappingData iumd = iums.getMappingData (systemalias, iuser);
     Map map = new HashMap ();
     iumd.enrich(map);
     String userid = (String)map.get( "user" );
     String pwd = (String)map.get ("mappedpassword");
I've add a sharing references in project properties,the value is "PORTAL:sap.com/com.sapportals.portal.prt.service.usermapping.IUserMappingService"
But when I run the iview on my Portal, it goes wrong, the message is:
com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to prepare application ''local/HomePage'' for startup. Reason= Clusterwide exception: Failed to start dependent library ''com.sapportals.portal.prt.service.usermapping.IUserMappingService'' of application ''local/HomePage''. Status of dependent component: STATUS_MISSING. Hint: Is the component deployed correctly on the engine?
    at com.sap.engine.services.webdynpro.WebDynproContainer.prepareStart(WebDynproContainer.java:1490)
    at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:231)
    at com.sap.engine.services.deploy.server.application.StartTransaction.prepareLocal(StartTransaction.java:184)
    at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:365)
    at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:117)
Anybody can help me?And are there anyother methods can get mapped user and password of Portal systems in Web Dynpro JAVA.

Hi Wayne,
      Did you added com.sap.security.api.jar to your webdynpro project. if not follow this steps.
1. Right-click the project in Eclipse or SAP NetWeaver Developer Studio.
2. Select Properties.
3. Choose Java build path -> Libraries -> Add Variable -> Select variable WD_RUNTIME -> Extend -> com.sap.security -> lib -> com.sap.security.api.jar.
I hope this should solve your problem.
Regards, Suresh KB

How to reset users and groups in Server.app?

Recently after change settings in the Server.app (like turn off/on open directory, delete/add certificates), I got a strange problem:
In the users and groups list, it display all local users and groups (looks like system users and groups, about 100 users and groups, but this is a new server)
I tried reset the server.app by following
howto reinstall/reinitialize os x server
http://support.apple.com/kb/HT200271?viewlocale=en_US
These users and groups still showing there.
Have you seen this before and how can I completely reset the server.app to factory default so that I can start over the set up?

In theory, that should restore the users. You can do some surgery if you are really brave. But the reinstall generally should be enough.
These accounts are in the DSLocal data store. Basically, this is very similar to the any OS X machine. Apple keeps a default copy of the Local Database here:
/System/Library/DirectoryServices/DefaultLocalDB/Default
Should you need to reset a machine to the default local database, you can remove the current database (/var/db/dslocal/nodes/Default) and then copy the default one to the same location. I would not go this far unless the reinstall was unsuccessful.
To check, you can run this command:
dscl . list /Users
That will list all the Users in the local DB. To get a count, pipe to wc
dscl . list /Users | wc -l
On a Server that I just jumped on, I see 79 users and 111 groups (dscl . list /Groups | wc -l) But this is a system will man SACL groups so I likely have more than the default.
Hope this continues to help. Probably more info that you want.
Reid
Apple Consultants Network
Author "Mavericks Server – Foundation Services" :: Exclusively available in Apple's iBooks Store
Author "Mavericks Server – Control and Collaboration" :: Exclusively available in Apple's iBooks Store

Extract Users and Roles

Hi,
I would like to move my users and roles from one system to another . Is there a way i can export and import the data back into the system.
I have already tried to export the repository schema and it did not give the necessary output.
I am working in 5.5 SP6 version
Regards,
Vignesh

Hi
You can do at Data base level using DML Queries, follow the below links.
How to Create Mass Users/Roles in SAP MDM Repository Running On Oracle Database
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0daad81-6a4b-2c10-9cb8-9586b0ebfb28?quicklink=index&overridelayout=true
How to Create Mass Users/Roles in SAP MDM Repository Running On SQL Database
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0224edf-bf37-2c10-228f-c16415815c5f?quicklink=index&overridelayout=true
regards
Sowseel

Users and permissions for a small home server

Hello community,
I have been using Linux on the desktop for many years now, but unfortunately my knowledge about servers is very limited, almost non-existent. Therefore my question is most probably equally well fitting here and into the newbie corner.
I'm trying to set up a little home server which should be in charge of following tasks:
- CUPS print server in the local network
- access to shared files through NFS in the local network
- backup (again over NFS)
- an Owncloud server
- maybe a mail server in the long run (NSA, paranoia, etc. )
For now I have set up the print server, the NFS server and was working on the Owncloud installation, when Owncloud gave me some errors with users and permissions. So I was led to the idea of rethinking the users and permissions on server. So far there is only the root user who may do everything. This seems like a quite unsafe configuration. I'd like to make it safer. First, the printer, the backup and the locally shared files should be accessible from the local network only. SSH access should also be accessible locally only. The Owncloud file folder should be accessible from the internet, but of course only for the Owncloud users registered to the Owncloud server.
What is the best way to set up users and permissions for such a set up?
Thanks for any hints,
PhotonX

Hi, i think it depends who are you serving for, if you are just serving for a small office or home server or a big organization. The following quick thinking just came to me:
I think cups set automatically a system user of its own, and runs as it, so no trouble there. Cups also has the option to set users and it uses the system users as default, i think it depends in in how many printers/users your have in your server.Users that can manage cups are in the lp group.
For nfs every user should have their home, samba is also a good option if you have windows computer in your network and it integrates better with graphical file managers like nautilus in the clients side, but it is a hassle to configure.
You should run the web server (owncloud ) as it own user, maybe you can manage to set something up for owncloud in the filesystem, but owncloud uses a database, and the users for owncloud are stored in there, and they are not system users.
You can configure ssh for local use only enabling the corresponding subnets in your /etc/sshd.conf and optionally but recommended you can set a firewall and permissions. You can use iptables but i prefer ufw for simple setup.
I think you should read the wiki:
https://wiki.archlinux.org/index.php/users_and_groups
and the other respective topics in the wiki.
Also as an advice i know that arch linux is a great distribution, but you have to do more work to mantain a stable server. I would recommend debian or another more conservative distro, but of course it is your choice.
Last edited by hydrosIII (2014-11-06 06:26:45)

Adding User to Group Programatically?

I've used the APIs below to create portal users and apply a
group number to them when they are inserted into the Portal User
table. However, when the users log into the portal, they still
are not attached to any group (i.e. Portal objects that can only
be viewed by certain group members, cannot be seen by the
programatically added users unless it is done manually in
Portal). Does anyone have an idea as to how to get this to work?
Thank You in advance,
Justin
Code to add users:
PORTAL30_SSO.WWSSO_API_USER_ADMIN.CREATE_USER(v_username,
v_password, v_admin_email, null, null, false, l_error_return);
PORTAL30.WWCTX_API_PRIVATE.SET_CONTEXT('PORTAL30','');
portal30.create_portal_user(v_username);
portal30.wwsec_api.set_defaultgroup(10, v_username);

I answered my own question. This seems to be the best procedure
form programatically adding users and applying them to existing
groups:
PORTAL30_SSO.WWSSO_API_USER_ADMIN.CREATE_USER(v_username,
v_password, v_email, null, null, false, l_error_return);
PORTAL30.WWCTX_API_PRIVATE.SET_CONTEXT('PORTAL30','');
portal30.create_portal_user(v_username);
portal30.wwsec_api.set_defaultgroup(9, v_username);
portal30.wwsec_api.add_user_to_list(portal30.wwsec_api.id
(v_username), 9, portal30.wwsec_api.NOT_OWNER);

User and group field values not propagating in Sharepoint 2013 variation

Hi,
I have a issue, we have a User and group field in my Content type and this content type is attach to Pages library.
I created one Page in source variation site and fill User and Group field with two user one is domain user and another is sharepoint\system account user.
After variation work and page propagate to target variation , there is only sharepoint\system account and no domain user in user and group field.
*****The main issue is domain user are not propagating in target variation site's fields.
Thanks,
dinesh

can any one hep me on this

WINDOWS 8.1 - System Tools no longer displaying User and Group Settings after adding a new LOCAL user.

I jumped on my parents computer, which is on a domain. I added a new local user(with my live.com login) and gave it admin status. That's when the trouble began.
The main user profile disappeared. I used the command prompt fix (see other fixes) to add the missing user back into admin. I logged back in, and it set up the account for the first time (WTF?). I cannot access any files from the main account
(that I logged into just fine before to get this debacle started.)
When going to Local Computer Management --> System Tools, my users and groups tool is missing.
I ran lusrmgr.msc only to find out that the most current version of Windows 8.1 and this is what it said "This snapin may not be used with this edition of Windows 8.1. To manage user accounts for this computer, use the User Accounts tool in the
Control Panel." <---- Awesome! (that was sarcasm.)
I have spent over two hours in the User Account tool during the course of this problem only to prove that a picture of a computer is more useful that that "tool".
To anyone reading this ticket, the best advice I can offer you (as long as its not a crucial machine) is to back up what you can gain access to, format your hard-drive and reinstall windows and start over again. I wouldn't recommend reinstalling 8.1,
I would say go back to 7 and wait until 10 comes out. Windows 8 is the new Vista. Good luck!

Hello AhavahOlam,
I can understand your feelings.
If my understanding is right, after adding a new local user in domain-joined Windows 8.1, you can’t open the local users and groups.
Can you still add account by going to Control Panel\User Accounts and Family Safety\User Accounts\Manage Accounts?
As this computer is domain-based, it is recommended to contact the domain administrator to see if the option is blocked.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

I bought the iPhone 4 user and when you are upgrading to the new system ios7 I have a problem activation lock note that I do not know what is the ID Apple and The password because the phone used?

I bought the iPhone 4 user and when you are upgrading to the new system ios7 I have a problem activation lock note that I do not know what is the ID Apple and The password because the phone used?
please help my what can i do?
IMEI : 012658006380001

Welcome to the Apple community Kobra.
Unfortunately, you cannot do very much with your phone unless you get assistance from the previous owner, they should either provide you with the password to unlock it or remove their account from the phone entirely remotely through iCloud.com > Find My Phone.

Im a vine user and was wanting to know how to vine with no hands so i added a gesture to use on vine and now the gesture froze on the screen and i cant control my phone anymore. Its a blue circle and i want to know how to get rid of it.

Im a vine user and was wanting to know how to vine with no hands so i added a gesture to use on vine and now the gesture froze on the screen and i cant control my phone anymore. Its a blue circle and i want to know how to get rid of it.

never mind it finally went away

Adding Users and Phones to UC systems

Similar Messages

Maybe you are looking for