Additional content not downloading on logic pro?

I originally ticked all the boxes on the additional content downloads and off it went downloading away. But as each pack gets right to the end it sticks either with a mb less than complete or all the mb/gb appears to have been downloaded, then a window pops up saying Logic unable to download. I cancelled the download and restarted logic so I could just tick one box at a time thinking this would help, but it reverted to downloading 3 packs at a time again! Is this a common problem, any ideas? Gaz

On every case I have come across this problem, it has been determined that the problem is being caused either by;
The person's Internet Service Provider (ISP) limiting the max size of file that can be downloaded from the internet.. eitehr by throttling or simply by stopping the download. As the additional files are quite large, you may want to look further into this with your ISp to check this is not the case.
or.....
The system HD drive is close to being full. Check you have enough free space on your system drive to download these files...
Good luck.

Similar Messages

Can anyone download the Logic Pro x manual?

Is anyone able to download the Logic Pro X manual from apple's site? I keep trying on my ipad but it crashes it every time, same with iPhone? Surely it can't be just on the mac, I want a stand alone manual I can refer to separately when recording, or even to read up on when I'm away from my studio. The other 2 smaller ones downloaded no problem. Any help is appreciated, thank you

Hi
Yep.... just crashed Safari on my iPad Air (iOS 7.0.4).
A second attempt worked OK
You could always add it from your Mac via iBooks or a PDF reader app and iTunes?
CCT

My K2000R will not respond to Logic Pro 9

My K2000R will not respond to Logic Pro 9

So the MIDI Sport has an A or B port selection?
MIDI Out of the interface to MIDI In on the K2000r
In the inspector on the left, (on a test track) set MIDI channel to ALL and try both the A & B ports.
Is the MIDI Interface plugged into a hub? If so try it on a port.
Did you upgrade anything recently, there was a version of OSX that stopped a bunch of USB stuff from working.
Is 10.7.5 correct?

Logic Pro X additional content will download but won't install

Hi,
I have Logic Pro X (10.0.1) installed on my 2012 Macbook Pro i7 2.6Ghz 8Gb Ram. I am able download the addition content but now just hangs & it has only installed the producer patches, surrond reverbs, garage band 11 sounds & instruments & the jam packs which I believe were there from my Logic Pro 9.
I have read support forum threads where peiople have downloaded it in smaller sections 1 or 2GB at a time with success, I have tried this & in smaller sections with no success.....it just still hangs saying "installing Orchestra" or whatever section I'm trying to install.
Can anyone help?
I went through **** to install the program itself as the initial installion just hung too on the "Essential Sounds and Instruments for Logic Pro & Mainstage", I finally installed after getting the content download link from a support thread.
Apple support is s***, I emailed about them about the download (after spending my £139.99) only to wait 24 hours for them to say delete it & try again (like we wouldn't have though of & done that already). After repling to say that & waiting another 24 hours they said here is an email address to our Tech support or a premium number to call WFT!!!!
Now the additional content won't install, between my Macbook Pro & Logic Pro X the money I've spent - Apple are taking the ****.
Please can some one help?
Thanks

Install on my Core2Duo 17" MacBook Pro went flawlessly, but install on my 8 Core Mac Pro suffered this problem. Many thanks for the solution Don, it worked for me ;-)
I am trying hard to supress an ironic chuckle though, reading other posts in this thread .... suggesting that people should call Apple Tech Support and expressing incredulity that people weren't doing this as their first option.
Well I can say say that after several calls to Apple Tech Support, amounting to several hours on the phone, and well over an hour on the phone with them today, I was informed that this problem is a known bug, and that Apple are working on a solution. They couldn't tell me what the bug is, what machines are affected, or what else might trigger it, or when a bug release might be due.
Their troubleshooting steps basically involved various reboots, repairing disc permissions, reseting the user home directory via terminal, booting up in recovery mode (but not safe mode as per this solution) trashing various preferences files, and, as a final step, uninstalling and reinstalling from scratch.
Only when all that failed was I told that there is a known bug that Apple are working on.
I came here to see what the community was saying, as the Tech Support guy did say there was likely to be some info on the forums. Lo and behold, a solution is posted and it works.
Why are Apple's Tech Support (in the UK at least) not aware of this?
Oh well, at least I'm up and running on my Mac Pro now.
Thanks again Don,
Cheers,
Nigel

Additional content not being downloaded !

Every time i start downloading the additional content it starts pretty steadily but then suddenly stops in between like on the halfway mark may be or somethin' saying some network error even when there is no problem with my internet connection which doesnt get disconnected even for a sec ! What to do ?
Someone help me out here. Seriously need that content !!

FCPX doesn't come with that footage. It is just the app. You need to provide your own footage.
That footage is part of their in-store demo...and what they used to demo it to people at trade shows.

I can´t download my logic pro

Some body can help me. I have just downloaded logic Pro 9.However , when I try to start the programa .it said that the program is loading the instruments to. its take many hours and suddenly it desapear and logic don´t work properly.Thanks for you help

Some people have an issue using the Logic Pro menu option to download the essential and additional content so...
Use these external links instead...
http://dl.dropboxusercontent.com/u/2972851/logic-downloads-fixed.html
Note: Make sure you quit Logic Pro before installing the essential and additional content via these links..

Digidesign Core Audio not working in Logic pro 7.1

Help! I'm not able to use Digidesign's (002 interface) as a core-audio interface for Logic Pro 7. Pro-Tools works fine with the 002. Logic works fine with built-in interface. However whenever I go to change from the built-in audio interface to the core audio 002 interface in audio drivers (in preferences), it won't allow me and I get the following message:
"Audio device has been removed" (press OK) then
"Previously selected audio interface is not available" (Press OK) (digidesign 002 interface has double brackets around the name in the audio drivers). If you try to relaunch driver again it disappears from the drivers list? In addition the "Digi design core-audio " application that opens up on the dock - just says "not connected" and some buttons are greyed out and you cannot "reconnect"?
Is there a conflict of drivers with the OS/Logic version and digi core-audio? I'm running Pro-Tools ver6.4, with digi core-audio 6.9 (updated from 6.4 - didn't solve the issue?), Logic Pro 7.1 and OS 10.3.9 (on a G4 1.25Ghz, 512Ram)?
It seems like a core-audio driver problem - but having updated to the latest version I'm still not getting any joy? Any offers?! Cheers.

Check the FW cable.
Anyway about compatibility Digidesign says this:
Mac OS X 10.3.9 Not Supported
With ALL versions of Pro Tools 6.x for Panther (other than Pro Tools LE 6.8.1 with Mbox 2 hardware only), the highest version of Mac OS X 10.3 that you should use is Mac OS X 10.3.8. There are incompatibilities with Pro Tools 6 and QuickTime 7, which is installed by Mac OS X 10.3.9. If you must use Mac OS X 10.3.9 for some reason, you should revert to QuickTime 6.5.2, available from the Apple website.
cheers
rob

Does anyone know where I can get a download of logic pro 9?

Hiya,
Does anyone know where I can purchase and download a copy of logic pro 9?

You cannot as there is no legal way to purchase a downloadable version of Logic Pro 9 any longer. Apple no longer sell it...
However you could purchase a used copy of the FULL boxed version (Make sure it is not the more common upgrade version) of Logic Studio 2.0 which included Logic Pro 9 via ebay or somewhere similar...

How to install additional content from Download

I purchased the Master Collection CS4 and downloaded the files. It had one main Master Collection install (.dmg) and several additional content downloads for various programs. The main instal worked great. But I can't figure out how I'm supposed to install the additional content. After opening the .dmg files there are no "setup" files within them. They just have fonts and graphics and things like that. I noticed on the fonts it has a option to install one-by-one, but that would take forever. Am I supposed to drag and drop these files into their program's application folder on my computer? I read everything (I think) and it doesn't say. Can somebody help? Thank you.

Adrian,
In other on-line downloads, where one had more than one file for the installation, i.e. Functional Content, the files were ZIP'ed and had to be un-Zip'ed with the "folder structure" checked. This would then Extract all files in their proper folders. It was within these folders that the installer files could be found. I'm not sure how this might have changed with CS4 though.
Hunt

MIDI Keyboard Not Working With Logic Pro X

I have a MIDI keyboard that I've had for a while. I've upgraded to Logic Pro X, but the keyboard isn't working. I can't hear sound when I play it, nor when I record and try to play it back to myself. What's more frustrating is that I used this keyboard all of the time with Garageband, and there were no issues . It's a simple M-Audio DigiCore MIDI keyboard, and I've updated everything, but I just can't get it to play. I am new to this software, so I'm having a really difficult time navigating this as well, so any help is welcome.

Ok here's what happened, controller was working fine everything set up, then it quit. called tech help at sweetwater, the motu was not seen as a midi interface anymore...went to motus web site, downloaded update for 10.4.4 THAT WAS IT! now it works!
Take note....thanks for your replies!

USB Interface Not Working With Logic Pro 9

Hello,
I've had a Tascam US-1641 for several years now with absolutely zero issues on my old PC. Ever since I upgraded to Mac (early 2011 17 inch Macbook Pro running Snow Leopard) I've had nothing but problems with the US-1641. No matter how many times I uninstall-reinstall the drivers and what USB port I plug it into, whenever I turn on the device and it's connected to my Macbook, it crashes my operating system and it freezes everything I was doing. Logic Pro doesn't load and when it sometimes does (10 minutes later), it immediately crashes when I click anything.
I've tried several tips to fix it and nothing worked. The most popular choice was select the default input/output in Logic to the system audio, then quit Logic, turn on the interface, then restart Logic. No such luck. I have to reboot my machine at least 5 times, uninstall/reinstall the driver and hope it works to use the interface. I thought it was the operating system, so I upgraded to Mountain Lion and installed the new driver for Mountain Lion, after of course deleting the other drivers and removing all previous data, and it is still giving me the same problems.
I don't have the money to afford a replacement model or a different interface from a different company, so I'm hoping you guys can help me figure out what exactly it is that's causing the interface to freeze my operating system and crashing my Mac whenever I try to use it. I am getting extremely frustrated at this and as much as I love OSX and Logic, what good is this piece of software if I can't use it? I need help.
Thank you.

The problem lies with Tascam and their inability to write stable drivers for OS X... and isn't anything to do with Logic Pro ..
As you know, you are not the only person to have had this issue and the reality is, while the 1641 might work fine with Windows, when it comes to OS X Macs.. it's an entirely different story... depending on the version of OS XS you are running.
The one tip I have read, that seemed to fix it for most people.. (Though not all) is as follows;
(Thanks to Paulypaulpaul for this)
-uninstall your tascam driver 2.10
-restart
-install driver 1.03
-restart
-plug in your tascam
-goto where you download your drivers (http://tascam.com/product/us-1641/downloads/), scroll down to the bottom where it says firmware, Download the firmware 1.02 (3rd from top under firmware), install it. your control panal should now read 1.03 for your drivers and 1.02 for your firmware.
-install drivers 2.10
-restart
Follow each of the steps exactly.. including all restarts when indicated..
...and good luck...

M-Audio Fast Track USB interface not compatible with Logic Pro X and Yosemite

Hello All!
I've been trying to simply record some guitar and vocal tracks onto the latest version of Logic Pro X. It worked before I downloaded the update of Yosemite, however now, I can't find a solution to my problem. I've tried everything! Installed new drivers onto the M-Audio and even tried to search for a later update of Yosemite. I have read a few things online about how Yosemite doesn't accept 3rd party drivers. So any USB plugged in to the macbook/mac that isn't mac based it doesn't accept.
Please can someone help me solve his issue!
Thankyou!
Felix

I know many, many of us who are running things just fine.
I have to be really honest with you Ben and say... Where are you getting that idea from because it simply isn't so.....
I have a quite large client list of Logic users from all over the world... and of those that have attempted to use Logic Pro X and Yosemite together... over 80% have had to revert back to a previous configuration because of performance and/or stability related issues...
I personally, have on test here at the studios... 7 different Macs ranging from 2010 Mac Mini i7 Servers to 2011 32GB 3.4Ghz iMacs.. to a maxed out 2013 i7 MBP to a top of the line 2014 Mac Pro and all have demonstrated issues regarding performance and stability with LPX and 10.10.x using a variety of different Audio/Midi interfaces, all of which have supposedly 10.10 compatible drivers... and all of which have no such issues running LPX under Mavericks...
Just a quick scan across the various forums.. indicates that very few people are successfully running LPX under Yosemite without performance problems.... so that's why I am asking where you are seeing 'many many people" because I am just not seeing that myself...
Cheers..
Nigel

GPO and RA plug-ins not working in Logic Pro 8.0.2

I have installed RA and GPO on my Mac Book Pro. When I open Logic Pro they are not appearing in the Plug-in list. Kontakt 2 is but won't let me load individual instruments for GPO. The strange thing is I also have a copy of Logic Express and both RA and GPO work fine here (even though they don't pass the AU validation). They also work as stand alones fine. In Logic Pro, RA and GPO do not appear in the AU validation list. Can anyone help? I have all the latest updates as far as I am aware. It's very annoying!

There's no Auval or RA or Garritan Personal Orchestra in the Audio Units Manager in Logic Pro. Though Stylus RMX that I also use and Kontakt Player 2 are there and successfully validated. The RA and Kontakt Player component are exactly in the place you said they would be.
I've since discovered that RA does not in fact work in Logic Express. As for whether it's loading up in Rosetta or PPC version - how do I tell that?
I really appreciate your help but I'm still stuck at square 1. Any more suggestions?!!

Apple remote is not working with Logic Pro 8

Hi all
Anyone any idea why, it would really help me as I need to remotely activate the record button. Many thanks Dave

My guess: it is simply not compatible with 10.6.8 (which was released well after Logic Pro 8)

Persisting Cut-off or unplayed notes problem in Logic Pro X

Hi Guys,
I've been having this persisting problem in LogicPro X. Let me just explain it here, I have a MIDI file which i got from the net, i played it in my piano role software and it was fine, but one i just imported the midi into Logic and just exported it straight away( just for experiment purposes), the notes became cut-off( example of cut-off? Ill send you the MIDI which i got on export from LOGIC aswell) when i played them in the piano roll software, and if i import and export the same MIDI in another software its fine, its just trhat ive grown accustomed to Logic Pro and i really enjoy it! I find FL studio and all those things annoying, so thats why i wondered if you guys could help me get a fix. And if something is wrong with my Logic just incase - if you guys give me your email address i will send the midi to you and can you just export it from your software and send it back to me? If the MIDI plays fine could you tell me your Logic Pro settings and such and such thanks! -And FYI if i re-open the exported MIDI in Logic its plays back fine! Im getting really annoyed and confused
PS: My piano roll software is Synthesia

You might want set up a key command for "paste at original position". My key command is command/option/shift/p. This seems to work flawlessly. Unfortunately I have run across the bug you're refering to.
Jim

Additional content not downloading on logic pro?

Similar Messages

Maybe you are looking for