AddOn Validation with Hardware Key

Hi,
I am trying to validate my addon on the current hardware key of the SAP License Server. I.e. i want that the addon should run only when the Hardware Key matches with the one i provide in my addon.
Kindly help on this or suggest any other option which you think is a better one.
Thanks & Regards
JS

Sorry , saw i had posted twice so closing one!!!

Similar Messages

Field validation with Tab Key

I am writing an application in which I must validate the data a user enters into a textfield when the user presses the "Tab" key. I have added a KeyListener to the textfield and when this java code is run as an applet the KeyListener catches the Tab key and all works fine. When I run this as an application, the Tab key does not seem to be caught at all by the Key Listener.
Has anybody else had this problem on the IPAQ, if so, do you know a solution.
Any help would be GREATLY appreciated.

I've been having this problem as well. I have created my applet using Visual Cafe 3 (Java 1.1). When I run this in Jeode it work great, Personal java works great, MSVM works great, but when I try to run using Sun Plugin 1.4.2_02 the tab key events are never fired.
Does anybody have a solution for this? Unfortunately, we are stuck developing with an older version of Java because of Visual Cafe.

Hardware key changed and license with error

I need your help, it was switched card
my network server and the time to start again
machine does not take leave SAP. to review
Because of this, is because the hardware key change, cree
a new license key with the new hardware, but
When I load it indicates that you can not validate.
Someone can help me with this.
thanks
Manuel

Dear Manuel Sandoval,
Try loading the license from the operation system level using SAPLICENSE command also as said above delete the existing old license and install the new license.
Regards,
Sharath

Change in hardware key on new installation with same SID

Dear Experts,
Background:
We installed SAP Netweaver 7.3 EHP1 on Microsoft Windows Server 2008 and applied SAP License on it.
So there was a specific SID, Hardware key and Installation No to our installation.
After few months our Server machine got crashed and we formatted it.
Problem:
Now we want to install SAP Netweaver 7.3 EHP1 again on same Server machine.
Here question is:
1. Will the Hardware Key be same if I install SAP Netweaver 7.3 EHP1 with the same SID as it was before ?
Note: We want to apply the same license that was there before the crash. But we can apply same license if and only if after installing with same SID as before, system generates the same Hardware Key as before Crash !!
Other Information:
Information that we got from SAP Note (94998 - Requesting license keys and deleting systems ) that :
" For the following data changes, you require a new license key:
Customer hardware key - database - installation number - system ID.
Thanks in advance for your apt responses.
Muddassar Khan

Hi Muddassar,
With OS reinstallation , the HW Key will change.
I suggest you apply for a new License with the new Hardware Key.
Was this a Test System??
You said after few Months , the system Crashed.
Have you taken a Backup (Windows System State) ??
Regards,
Ashish .A. Poojary

Old Software with Parallel Dongle or Hardware Key

Hello,
I'm trying to run old software that uses a HASP/hardware key/dongle on the parallel port. Any helpful ideas on how to get the software to see it in Virtual PC, XP Mode?
Much appreciated,
Dave

Hi,
Parallel ports are not supported by XP Mode in Windows 7.
Please refer to the following similar thread:
https://social.technet.microsoft.com/Forums/en-US/4890a9d4-d4e7-4875-a7b0-69188b3c14e0/using-xp-software-with-a-parallel-port-dongle-in-windows-7-professional?forum=w7itprovirt
Karen Hu
TechNet Community Support

Sneak Preview NW CE 7.1 SR5 Hardware Key : where to get it from ?

Hi Expert i just installed NW CE 7.1 SR5 ,
     issues:
      1. In order to avail 90 validity i need to provide Hardware key on registration page. How to find this key ?? mine is JAVA stack only??
       2. i dont find irj folder under C:\usr\sap\CE1\J00\j2ee\cluster\apps\sap.com now how can i launch the portal ???
any help would be great.
Regards
Eureka

from start.htm license:
The first step is to obtain the Hardware Key. Log into the system with SAP* user and click on Administer SAP Licenses or use the transaction code SLICENSE. The picture below shows where to find the Active Hardware Key.

Error installing license - Hardware Key Empty

Hello gurus,
We have our SAP ECC 6 installed in one Server running AIX. It´s working good.
Now, we have installed a cluster service. If the First Server stops, the cluster service (IBM HACMP) move all filesystems to Second server. The cluster moves also users, IP address and hostname. After move all resources, then the service starts ECC in another physical server.
This process is working fine. But when the SAP ECC starts on the second server, I cannot logon in system because the license key is not valid. I can logon only with SAP*.
So, when I call SLICENSE to get all information needed to get another license, the field Hardware Key is empty.
I´ve tried too by operating system (saplicense -get). I have now the hardware key and the new license file. This file was installed, but SAP system is not working yet. For information, the license appears as valid, but the field is empty yet and the system doesn´t work.
Anybody have an idea to solve this problem?
Thanks,
Carlos

Hi Carlos,
Please check the OSS notes: 181543 and 538081.
Regards.
Ruchit.

License & Hardware-Key for CE1

Hi,
where can I see how long the license is valid of the current installation ( CE711SP1_SDN-Preview CE1 ).
And secodly I would like to know how to obtain Hardware-Key and getting installed.
Regards
Alexander
Edited by: AlexanderZiegler on Oct 18, 2009 5:08 PM

I have got it.
Once the CE server is up and running, launch your browser and go to http://localhost:50100/nwa to start SAP NetWeaver Administrator. Log on with username Administrator and the master password you defined during the installation procedure.
Download and install a license key
The first step is to retrieve your systemu2019s hardware key from SAP NetWeaver Administrator. Go to Configuration Management Infrastructure > Licenses. Copy your u201CActive Hardware Keyu201D into the clipboard.
Go to http://www.sap.com/minisap fill out the form, and paste your hardware key from the clipboard. Submit the form.
Edited by: AlexanderZiegler on Oct 19, 2009 8:19 AM

Duplicate Hardware Key when tried to request for new license key

Dear Experts,
Our SAP ECC6 license key is going expire in these few days. Therefore, I tried to request for new license key with the same Hardware key at SAP Support Portal, but it showed "Duplicate Hardware Key".
Should I wait for the current one to expire before I could request for new one?
Regards,
Abraham

Hi Nick,
It's not a temporary license.
It just when I tried to get a new license key 1 week ago, the installation number we had was just licensed for MaxDB as database server, therefore, it only gave 2 weeks validity of license key.
Now, we have changed our contract licensed to MS-SQL server.
Therefore, I need to get the new license key based on MS-SQL server. Since, I didn't do any reformating on the server, thus, the hardware key is still the same when I tried to get the new license key.
What should I do?
Regards,
Abraham

Active Hardware Key is missing in ECC 6.0

Hi All,
I have an issues with my ECC 6.0 system. Once I restart my application server due to hardware maintenance. Since that time, I can't logon to my ECC 6.0 except in client 001 with user SAP*. I found in transaction SLICENSE that my active hardware key is missing...
Could anyone help me with this problem ??
Rewards points will be give to you who could solve this problem.
Thank you..

Dear,
Do you have a license installed ? (check the slicense status)
You may request a new license in SAP Service Marketplace at http://service.sap.com/licensekey
Please note that as of Web Application Server ABAP 7.0 the license keys are digitally encrypted. Therefore you must request a new license key for your existing or new system if you are using a SAP product based on Web AS 7.0. Request your digital encrypted license key with license type standard and install it as described in SAP note 870871.
I hope this helps,
Lucio Rodrigues

Error in license check - Error getting the hardware key

Hello,
I'm trying to run SAP NetWeaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition
but I still have a issue to log on, message : "error in license check"
I try everything I found in forums, I have tested the license, see the trace below.
I checked too files dev_w*
It seems there is a problem with server message
I checked in "dev_ms" file, but nothing has been wrote inside.
Please could you help ? maybe someone met the same issue and solved it.
Thanks
trc file: "dev_slic", trc level: 2, release: "700"
Test license for SAP SYSTEM: N4S
rdisp/mshost: n4shost
rdisp/msserv: sapmsN4S
MsIAttachEx: connect to n4shost / sapmsN4S
NiIInit: allocated nitab (2048 at 0xb72fa008)
NiHsLInit: alloc host/serv bufs (100/100 entries)
NiHsLGetNodeAddr: got hostname 'n4shost' from operation system
NiIGetNodeAddr: hostname 'n4shost' = addr 192.168.155.1
NiHsLGetServNo: got service name 'sapmsN4S' from operation system
NiIGetServNo: servicename 'sapmsN4S' = port 0E.11/3601
NiICreateHandle: hdl 0 state NI_INITIAL
NiIInitSocket: set default settings for new hdl 0 / sock 4 (I4; ST)
NiIBlockMode: set blockmode for hdl 0 FALSE
NiITraceByteOrder: CPU byte order: little endian, reverse network, low val .. high val
NiHsLGetServName: found port number 0E.11/3601 in cache
NiIGetServName: port 0E.11/3601 = servicename 'sapmsN4S'
***LOG Q0I=> NiPConnect2: connect (111: Connection refused) [nixxi.cpp 2769]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 4
"dev_slic" [noeol] 26L, 1378C 1,0-1 Top
dev_w8
M Wed Oct 19 11:46:48 2011
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 512]
M *** ERROR => SlicLikeyGetHardwareKey: no hwid from MSG server: -1 [sliclikey.c 1250]
M *** ERROR => wlikey_check_webas: Error getting the hardware key. You might find some information in file "dev_ms" on the message server. [sliclikey.c 1269]
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 512]
M *** ERROR => SlicKCheckLicense: did not get hwid from message server [slicch.c 306]
M *** ERROR => no hwid from msg-server received [likeyapi_w.c 2257]
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 512]
M *** ERROR => SlicLikeyGetHardwareKey: no hwid from MSG server: -1 [sliclikey.c 1250]
M *** ERROR => wlikey_check_webas: Error getting the hardware key. You might find some information in file "dev_ms" on the message server. [sliclikey.c 1269]
M *** ERROR => ThCheckReqInfo: message send/receive failed [thxxhead.c 17124]
M
M Modeinfo for User T8/M0
M
M tm state = 2
M uid = 9
M term type = 0x2
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >SAPSYS <
M terminal = > <
M client = >000<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M its_plugin = NO
M allowCreateMode = YES
M blockSoftCanel = NO
M session_id = >4E9DB1D2B02B3BF6E1000000C0A89B01<
M ext_session_id = >4E9DB1D2B02B3BF6E1000000C0A89B01<
M imode = 2
M mode state = 0x42
M mode clean_state = 1
M task_type = ZTTABTC
M lastThFc = THFCBTC
M lastAction = TH_IACT_NO_ACTION
M th_errno = 0
M rollout_reason = 0
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 2
M roll state = 2
M abap state = 2
M em state = 3
M eg state = 1
M spa state = 3
M enq state = 0
M softcancel = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M msg_count = 31
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = 0xa665a3b0
M plugin_info = NULL
M act_plugin_hdl = -1
M act_plugin_no = 0
M max_plugin_no = 0
M async_receives = 0
M vm = no VM
M
M *** ERROR => ThMBufFullRead: ThOpcodeToMsg [thxxmbuf.c 225]
M *** ERROR => ThMBufGet: ThMBufFullRead [thxxmbuf.c 183]
L *** ERROR => BtcEvtRaise: ThScheduler failed (target=, rc=4) [btcevt.c 223]
L *** ERROR => BtcEojRaise: BtcEvtRaise failed: jobname=BI_WRITE_PROT_TO_APPLLOG , jobcount=11414801, status=A [btcevt.c 52]

Hi,
As you are running a Trial version, I do not think HA/ASCS would be relevant for you.
As you found in the dev_ms trace, the port 3601 for message server is not accessible:
NiIGetServName: port 0E.11/3601 = servicename 'sapmsN4S'
***LOG Q0I=> NiPConnect2: connect (111: Connection refused) http://nixxi.cpp 2769
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 4
Check via command netstat if the port 3601 is free for use. The hardware key is obtained from message server and since this port is not available, neither is the message server/the hardware key. Perhaps a VM restart could also help.
Regards,
Srikishan

Keyboard hardware key not working

hi,
i'm trying to set the keyboard hardware keys of my vaio, this is the output of a few commands;
sto cercando di impostare le hardware key del mio vaio, butto qua qualche comando per capire meglio:
cat /sys/class/dmi/id/sys_vendor
Sony Corporation
cat /sys/class/dmi/id/product_name
VPCS11E7E
xev: no output.
showkey -k
keycode 360 press
keycode 360 release
showkey -s: no output
/lib/udev/keymap -i input/event6
scan code: 0x49 key code: vendor
xbindkeys -mk: no output.
is there something useful?
- i've created the file "/lib/udev/keymaps/module-sony-vpcs11e7e"
with this text:
0x49 vendor # VAIO
and i've inserted it in "/lib/udev/rules.d/95-keymap.rules" without results.
- i've created a "file" with this text:
keycode 360 = Super_R Super_R Super_R
and then i used the command
xmodmap file
without results.
what i've to do??
Last edited by syco (2011-08-05 13:06:16)

What happens if you press the key in question then perform a dmesg | tail
Any messages like these:
[136424.699297] atkbd serio0: Unknown key released (translated set 2, code 0x94 on isa0060/serio0).
[136424.699303] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.

Hi my iMac has decided to come up for the 5 time Work the ? Symbol just tris time everytime i try to restart the iMac with any key it won't work, then I try also i knserted the installation dvd and it does not, If media is getting scratched in the drive

Hi my iMac has decided to come up for the 5 time With the ?question mark Symbol just this time when i try to restart the iMac with any key it won't work, then I try also to insert the installation dvd and stard with yhe C or D key
Still no way to grt it starting, also I notice the DVD drive is getting scratched in the drive just before it outomaticly ejected.
media is getting scratched after been used and ejected by my iMac without loading .
Please help!!! I to finish my college work and have no way of work on it! HELP
Thanks

Boot off your *original* Install Disk while holding down the *d key*, (not c key), then run the extended Apple Hardware Test. Some disks require you to use the Option key at bootup to select AHT. Some models have a separate AHT CD. Some have it on the Disc #2.
The Memory test can really only be trusted if it finds a problem, not if it doesn't find a problem.
Memtest OS X...
http://www.memtestosx.org/joomla/index.php
Rember is a freeware GUI for the memtest ...
http://tech.kateva.org/2005/10/rember-freeware-memory-test-utility.html

USMM Hardware key issue

Hi,
Environment: OS:HP-UNIX , ECC6., Oracle DB
i have applied sap license in 000 with sap* user id successfully. And everything is working fine except one thing.
That is when i go to transaction USMM the hardware key is wrong it shows A0000000. And hardware key is correct in slicense and at service market place.
Please let me know what i can do.
I have also applied license from OS level and still issue is persisting. SAP restart is also not resolving the issue.
Gracias in advance..
Sammy..

Thx Juan...for the solution..that too in such a short time...
tread is marked as answered...
sap_shobhit...thanks for the reply...appreciate ur help...

Generate 2 line items with posting keys in same table while using FM .

Dear Expert ,
For T-code f-65 ,I have to park a FI Document .i tried with PRELIMINARY_POSTING_FB01 for parked Document . But i am not successfully park the document .
with the help of F-65 the data Segregate between Tables VBSEGS and VBSEGD with respecting Posting key . but with this Fm entire entry is displaying in table VBSEGS .For example it generated two line items with posting keys '15' and '40' and these both are displayed in VBSEGS whereas posting key '15' has to be displayed in VBSEGD.
when i check this Document in FBV0 Error reflect " G/L Account 0012000 1001 Does not Exist ".
Here my code -
DATA:   XT_BKPF LIKE BKPF OCCURS 0 WITH HEADER LINE ,
        XT_BSEG LIKE BSEG OCCURS 0 WITH HEADER LINE ,
        XT_BSEG1 LIKE BSEG OCCURS 0 WITH HEADER LINE ,
        XT_BSEC LIKE BSEC OCCURS 0 WITH HEADER LINE ,
        XT_BSET LIKE BSET OCCURS 0 WITH HEADER LINE ,
        XT_BSEZ LIKE BSEZ OCCURS 0 WITH HEADER LINE ,
        XT_BKORM LIKE BKORM OCCURS 0 WITH HEADER LINE ,
        XT_THEAD LIKE THEAD OCCURS 0 WITH HEADER LINE ,
        XT_SPLTTAB LIKE ACSPLT OCCURS 0 WITH HEADER LINE ,
        XT_SPLTWT LIKE WITH_ITEMX OCCURS 0 WITH HEADER LINE .
DATA :    XTEXT_UPDATE LIKE BOOLE-BOOLE VALUE SPACE,
          XTEXT_ITEM_UPDATE LIKE BOOLE-BOOLE VALUE SPACE,
          XI_UF05A LIKE UF05A,
          XI_XCMPL TYPE XFELD VALUE 'X',
          XFS006_FB01 LIKE FS006 ,
          XI_TCODE LIKE T020-TCODE VALUE 'F-65',
          XI_PARGB LIKE RF05A-PARGB        ,
          XI_TCODE_INT TYPE TCODE           .
DATA P_RETURN LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE.
XT_BKPF-BUKRS     =     'CP01'.
XT_BKPF-GJAHR     =     2011.
XT_BKPF-BLART     =     'DZ'.
XT_BKPF-BLDAT     =     SY-DATUM.
XT_BKPF-BUDAT     =     SY-DATUM.
XT_BKPF-MONAT     =     '06'.
XT_BKPF-CPUDT     =     SY-DATUM.
XT_BKPF-WWERT     = SY-DATUM.
XT_BKPF-USNAM     =     'ABAPER'.
XT_BKPF-TCODE     =     'F-65'.
APPEND XT_BKPF.
XT_BSEG-BUKRS     =     'CP01'.
XT_BSEG-GJAHR     =     '2011'.
XT_BSEG-BUZEI = '001'.
XT_BSEG-BSCHL = '40'.
XT_BSEG-KOART = 'S'.
XT_BSEG-SHKZG = 'S' .
XT_BSEG-GSBER     =     'CPLN'.
XT_BSEG-BUPLA = 'CP01'.
XT_BSEG-WRBTR     =     10000.
XT_BSEG-PSWSL = 'INR'.
XT_BSEG-ZUONR = 'CH. 123456'.
XT_BSEG-HKONT = '241000'.
APPEND XT_BSEG .
CLEAR XT_BSEG.
Vendor line item - required even for header only - BSEG table
XT_BSEG-BUKRS     =     'CP01'.
XT_BSEG-GJAHR     =     '2011'.
XT_BSEG-BUZEI = '002'.
XT_BSEG-BSCHL = '15'.
XT_BSEG-KOART = 'S'.
XT_BSEG-SHKZG = 'H' .
XT_BSEG-GSBER     =     'CPLN'.
XT_BSEG-BUPLA = 'CP01'.
XT_BSEG-WRBTR     =     10000.
XT_BSEG-PSWSL = 'INR'.
XT_BSEG-ZUONR = 'CH. 123456'.
XT_BSEG-HKONT = 'PC04000001'.
APPEND XT_BSEG .
CLEAR XT_BSEG.
CALL FUNCTION 'PRELIMINARY_POSTING_FB01'
   EXPORTING
     TEXT_UPDATE            = XTEXT_UPDATE
     TEXT_ITEM_UPDATE       = XTEXT_ITEM_UPDATE
I_UF05A                =
     I_XCMPL                = XI_XCMPL
FS006_FB01             =
      I_TCODE                = XI_TCODE
I_PARGB                =
I_TCODE_INT            =
IMPORTING
    XEPBBP                 = CHECK_A
    TABLES
      T_BKPF                 = XT_BKPF
      T_BSEG                 = XT_BSEG
      T_BSEC                 = XT_BSEC
      T_BSET                 = XT_BSET
      T_BSEZ                 = XT_BSEZ
T_BKORM                =
T_THEAD                =
T_SPLTTAB              =
T_SPLTWT               =
          EXCEPTIONS
            ERROR_MESSAGE = 1.
P_RETURN-ID         = SY-MSGID.
P_RETURN-TYPE       = SY-MSGTY.
P_RETURN-NUMBER     = SY-MSGNO.
APPEND P_RETURN.
     p_return-MESSAGE_V1 = XSYMSGV.
IF SY-SUBRC = 0.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
        WAIT = 'X'.
ENDIF.
WRITE :/ sy-subrc , sy-MSGV1 .
Thanks ,
Ashish Gupta

Hi Raghuram,
I found a very important SAP Note 103051, details are below.
An IDoc processed by function module IDOC_INPUT_INVOIC_MM (of category INVOIC01) must not refer to the same purchase order item in several invoice items. This is also valid if for a goods receipt-related invoice verification several delivery notes belong to the same purchase order item.
Depending on the system settings and the situation, various error messages can occur (for example, FD240 'Order item ... selected more than once' or M8050 'Balance not zero: & debits: & credits: &').
In this situation module IDOC_INPUT_INVOIC_MRM generates error message M8321 'Document contains same order item more than once'.
For example, this situation occurs if you work with individual batch valuation and the SD billing document executes a batch split for different batches which belong to the same purchase order item and delivery.
Other terms
INVOIC, SAPLIEDI, M8047, M8, 321
Reason and Prerequisites
This is because of the program design.
Solution
There is no solution for IDOC_INPUT_INVOIC_MM.
Module IDOC_INPUT_INVOIC_MRM (only as of Release 4.0) for the logistics invoice verification can distinguish different goods receipts by means of the delivery note number. For this purpose, GR-related invoice verification must be active.
Owing to this symptom, billing documents for single batch valuation with batch split cannot be settled in MM-EDI inbound processing. The settlement generates exactly the situation described (several invoice items for the same purchase order item). In this case, the only solution is to deactivate the billing of the batch sub-items in SD Customizing and to calculate the main item only.
Hope this helps.
Reward if helpful.
Thanks

AddOn Validation with Hardware Key

Similar Messages

Maybe you are looking for