ADF Form no longer functioning after being wrapped in layouts.

JDeveloper 11.1.1.0.1 + ADF BC + ADF RC
I had an ADF panelFormLayout that was functioning perfectly until I wrapped it in a panelSplitter and wrapped the panelSplitter in a panelStretchLayout.
Now, when I query the correct results are initially displayed, but when I press the Next button, certain inputTexts don't change to display the correct values.
Some of them change to reflect the current values in the iterator (those with partialTriggers), but most simply continue to display the values of the first record returned. The Previous button doesn't seem to work at all anymore.
What am I missing here? Why would wrapping the panelFormLayout in other layouts cause this behavior?
Thanks All!

Heres the steps to create:
- New > Application
- New > 'Business Components From Tables' and make BCs for Employees and Departments
- Edit EmployeesView to include where clause "WHERE Employees.LAST_NAME LIKE :last, and create String bind variable for 'last'
- New > JSF JSPX
- Insert PanelSplitterLayout into Form component
- Drag ExecuteWithParams operation from EmployeesView into PanelSplitterLayout 'Second' facet as ADF Parameter Form
- Drag EmployeesView from Data Controls as ADF Form with navigation buttons under ExecuteWithParams parameter form.
- Set disabled=true for EmployeeId, FirstName, and LastName inputTexts in ADF Form
- Drag DepartmentsView from DataControls into PanelSplitterLayout 'First' facet as ADF Tree, creating a two level tree: Department Name > Employees First and Last Name
To produce the problem once running:
- Enter '%' into the text box for the bind variable 'last', and click ExecuteWithParams button
- You will see the next button does nothing
- If you click ExecuteWithParams button again, everything starts to work again.
Much thanks.
Edited by: Alexander Pepper on Feb 4, 2009 7:51 AM

Similar Messages

HT1766 ipad no longer functions after accepting an updated version of "Hayday"

ipad no longer functions after accepting an updated version of "Hayday"

Unfortunately it was a blinding flash of the obvious that fixed my issue...
Simply rebooting the iMac brought it back to life.
Duh.
I assumed that since Apple usually forces reboots after updates if they are required that this didn't require one, apparently it did.

Headphones no longer work after being plugged into speaker

Hi i purchased a ipod touch 5th generation 32 gb bundle from target just over a week ago which came with the iCoustic 20 in 1 Accessory kit Model No : IC184. After plugging the ipod into the supplied speaker this morning trying to listen to music it kept making stacic like noises and changing volume it was alwful to try and listen so gave up and went back to taking it off speaker and playing it back through apple headphones but now after being plugged into the speaker the headphones wont work its just a buzzing sound if you turn the volume up all the way loud the music will come back through headphones then when turning it down it cuts out again or if you manage to get the music it will stop after a couple of seconds. I have done a factory reset but it has made no difference.Please help have a very upset daughter it is frustrating do we take this back for a refund and get a new one if so how do we keep the music and photos etc she has on this one? Thankyou.

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.

Flash drive no longer works after being connected to a Windows XP machine.

After being opened on a Windows XP machine, the contents of my flash drive now shows up on my Macbook pro as a single .lnk file. What happened? It's MS-DOS (FAT32).
Is there any way out of this or has all my data been lost? I've never experienced this issue previously.

Thanks. I've now scanned it with both Sophos and ClamXav and both have come up negative for infection.
At least while the scan was running I could see that all my data is still there as the name of each file appeared as it was going through the scan.
My efforts to sort this out seem to have made things worse as now it opens up word whenever I try to see the contents. I'll try it on a PC tomorrow and see if I can figure out what happened. Looks like the file system has been damaged in some way.

LabPython does not function after being built into an executable application (am i missing DLLs or Paths?)

Greetings!!
I have recently been playing around with the amazing power of Python in Labview and have built some very functional VIs that utilize this tactic. However I now find myself at a bind. Everything runs great in the IDE, but not so great as a standalone application.
i am running:
Windows 7 64bit
Labview 2012 32bit
Python 2.7.3 32bit
My build specifications configuration attempts have all failed to run Python, and the application typically always return a very non descriptive error such as:
PYTHON New Session__ogtk.vi->NameOfMyVIFile.vi
I have tried adding DLLs to the "always include" section of the build spec.
DLLs such as:
Lvpython.dll
pytscript.dll
and I have even tried including them in both the support directory and the caller's directory to no avail. I have even tried placing the entire application + supporting files in my main Labview and python directories just to see their behavior with no apparent differences.
so now I’m left with no options that i can think of. and I'm sure I have crawled around Google so much now that I’ve read all the same posts and websites nearly three times already.
Please help me debug this!! I’m sure it’s something super simple but not very obvious that I’m missing.
I hope everyone has a great day, and thank you!
Grant.
Solved!
Go to Solution.

My python installation folder is "C:\Python27" and python27.dll is located in there.
initially i ran the "PYTHON Set Server Path" with an input string equal to: 'C:\Python27\python27.dll' while in the IDE. i have read however that (as long as the system path in windows is configured correctly) passing a string of just 'python27.dll' would work, but i did not try this.
after that the "PYTHON Script Node" is what i used to test LabPython and all's ok in the IDE but not in applications.
i have also tried this as an executable:
Which porduces this:

Rosetta no longer functions after iTunes & Quicktime update

I got off the 3rd phone call to AppleCare (three techs and product specialist -- the least helpful in the bunch by the way) and finally isolated the problem I'm having but the reaction from the AppleCare guy (the last one pretty much freaked) means there is little hope for a quick solution from Apple.
After updating iTunes and Quicktime using OSX software update. I could no longer launch legacy apps that operate using rosetta (i.e MS Office, AppleWorks, JMP, etc.). Additionally, if I go into GetInfo from the finder and click "Open using Rosetta" that app will no longer launch. In both cases the app simply (if clicked from the finder) appears briefly in the dock and then disappears.
When I had AppleCare on the line the guy went to confirm something with me on his machine and was very surprised to find that his copy of MS Word was not working either (his word were something like: "Good Lord, the menus are all grayed out, huh?". At which point I decided there was not going to be a fix. He sent me some articles on Archive and Install, which I may do but I'm hoping not to go that route.
I've got one more symptom that may help others figure out what's happening, which will hopefully mean you can help me fix this:
When I try and launch an app (legacy or universal) from the command line using rosetta (see this for more info) I get: Segmentation fault!
Okay, first would someone out there confirm that this is not happening on their system. Then, one of you brilliant souls, let me know what I can do to fix it. Is there a sneaky way I could bust into a package/install image and install a fresh copy of the rosetta libraries etc? My experience with Segmentation Fault usually points to the executable being broken, but I'm by no stretch of the imagination an expert.
Regards,
David G.

You won't like this but I figured out QT smashed rosetta soon after installing the ituunes/quicktime updates when quicken wouldn't load...i knew it was one of the major apps that was never released for universal...at first i assumed the apple update had just broken quicken and checked the quicken site, finding no posts...then it dawned on me that the QT update must have damaged the System so I went hunting in my apps for other rosetta-only apps, found an old CD label printing program and it exhibited the same behaviors.
I went to the apple site and the company has not posted any info on the bug, then went looking for a standalone rosetta installer...couldn't find one
Here's the part you won't like: my mac mini is 3 months old. I dug out the os x install disks and reinstalled the system. Then went through and reinstalled system updates. Reinstalling the system killed norton so I had to reinstall that too (no wonder i keep all the installer disks as dmg's on the ministack).
Result of all this, replacing the system, was that Rosetta is now working again.
I then went on to install ram, that went less smoothly and my local geniuses were less ingenious by this point, but that's another story for a paperweight website.

LaCie external hard drive no longer readable after being connected to a PC

Hi all,
First post here and I really worried.
I have a Lacie external drive which I normally connect to my Mac - no problems.
Tried to connect it to my Windows 7 pc to transfer some files and it wasn't recognised. It installs the drivers and says its ready to use, but doesn't appear as a drive. So I read about it and the advice was to go to Computer Management - Disk Managment and mark drive 1 / partition as active and then assign a drive letter. So I did that and then Windows tells me that I must format the drive to use it.
Obviously I don't want to as I can't loose my data - my wedding pictures are on the drive!
So I've plugged the Lacie back into my mac, and the drive is unusable and says I need to format too. Even the repair function doesn't work.
Now I've read the another post and downloaded Test Disk (I'm working off my mac though as I know the drive worked and all my files where added from the Mac).
Its currently Anaylsing the cylinder but its taking a long time. 24hours and still on 30% (1TB drive, firewire)
I've read the help guide but once this stage completes, having read the next few steps, I'm lost.
Any ideas on what might have happened and what I need to do next?
I'll report back once its finished its 'deeper search' and analysing.
Or do I abort the above process and do something else?
Please help.
Thanks in advance,
Nick

I've read the help guide but once this stage completes, having read the next few steps, I'm lost.
And those few steps were? Care to share?
Lacie has great tech support. Call them - http://www.lacie.com/support/faq/faq.htm?faqid=10338

Acrobat Pro Calculating form fields lose functionality after enabling document for Reader

I have a problem that continues to come up increasingly. I thought I had found a work-around on some forums, but it is still causing trouble. Im hoping you can answer the question.
I am creating a form that requires simple calculations (sum and add). I can get these calculations to work just fine. However, as soon as I enable the document for Adobe Reader, the form seems to get amnesia. It loses the ability to calculate. When I go into the fields again to look at them, they still show that they are supposed to calculate, but arent working. I have to clear the calculations and completely reset them all in order to get them to function again, but as soon as I save this enabled doc, it loses its functionality all over again.
Frustrating.
I did find a work-around on a forum, but have only gotten it to work once. It had something to do with closing and saving the document, then reopening it before entering the calculations.
Is there a clear-cut solution to this problem? The forums were rife with people experiencing the same frustrations.
Thanks ahead of time for your assistance.

Nathan,
It's fairly straighforward to set up a custom validation script for this, but it might not be immediately obvious how to do it. I'll use your form as an example. In it, you have a number of rows with a Quantity field where the user enters how many items are needed, a Price field that has as its default value the price for the item, and a Total field which is a calculated field and should be the product of the Quantity and Price fields. The only variable in the calculation is the value of the Quantity field, so this will be easy.
The Validate event of a field gets triggered when the field value is committed. This happens when the user enters a value and presses Enter, Tab, clicks outside of the field, etc. What the script should do is take the value the user entered, multiply it by the value that's in the Price field, and set the value of the Total field. The script could look something like:
(function () {
    // Get the value of this field, as a number
    var qty = +event.value;
    // Get the value of the Price field, as a number
    var price = +getField("PRICE.0").value;
    // Calculate the total
    var total = qty * price;
    // Set the value of the Total field if not zero,
    // otherwise, blank it out
    getField("TTL.0").value = total ? total : "";
What you really should do, however, is set up a document-level JavaScript (Advanced > Document Processing > Document JavaScripts...) that contains a function you can call from the QTY field of each row. The function will determine which row should be affected based on the field name that triggers it. Something like:
function calcTotal() {
    // Get the row number from the field name
    // of the field that called this function
    var row = event.target.name.split(".").pop();
    // Get the value of the field that called this function, as a number
    var qty = +event.value;
    // Get the value of the Price field, as a number
    var price = +getField("PRICE." + row).value;
    // Calculate the total
    var total = qty * price;
    // Set the value of the Total field if not zero,
    // otherwise, blank it out
    getField("TTL." + row).value = total ? total : "";
Than all you have to place as the custom Validate script of each of your QTY fields is the following:
calcTotal();
Also, make sure that you remove any calculations that you've set up on the Calculate tab of each TOTAL field. Now that the total fields do not rely on automatic calculations, it does not matter that the document is missing its field calculation order array, though this bug REALLY needs to be fixed. You should consider reporting it to Adobe. I will report it too.
Note that this code assumes the QTY and PRICE fields are numeric fields, meaning they will either be blank or contain a valid number. You've ensured this by setting up each with a Format category of Number.
George

InfoPath 2013 customized forms no longer working after linking Sharepoint 2010 list to MS Access 2013 database

Hello,
I am having trouble with my infopath form now that I have linked my Sharepoint list to an Access database.
Background: I created a simple SharePoint list and a few workflows to have users submit requests for changes to my organization's EMR system and have those requests be approved by the appropriate manager/department. I used
InfoPath to customize my form so that it would hide/show different portions depending on what the user selected. The form has 3 views: NewItem, EditItem, ViewItem.
Issue: The form and workflows were working great until I linked my SharePoint list to an access database so that I could run queries and reports using that information. Now when I click "Add New Item" on my Sharepoint site,
the correct form opens but the fields do not allow me to input any data and some of the formatting for the form has changed (ie: the text boxe fields are no longer centered. I opened the form in InfoPath and it displays perfectly fine in there but
not once it's published to the site) .
The only way that I've been able to input new data is using Datasheet view in SharePoint.
Is there a way to fix this issue? I really need to be able to have the customized forms for users to fill out the information since most users are not familiar enough with SharePoint to expect them to be able to use Datasheet view to submit their requests.
Again, I'm using InfoPath 2013, Access 2013 & SharePoint Server 2010
If the issue cannot be fixed, how can I disconnect or unlink my SharePoint list from the Access database because when I cliecked on "delete list" from inside Access, a warning popped up stating that it will also delete the list off of SharePoint
as well. If I can get the list back to the state it was in before linking to Access then I'll be happy enough to export it excel and then importh the excel file to Access as a work around for reporting purposes since I don't have to run the reports that
often.
Any insight would be very helpful!!

Hi Bostic,
I tested the same scenario per your post in my environment, however the InfoPath form was not affected if I used the list as external data in Access database.
The issue may be due to the browser you used.
I recommend to verify the things below:
Change another browser to see how it works.
Add the site to the trusted zone and add to compatibility settings in Internet Explorer.
Test with a new list to narrow down the issue scope.
As a workaround, you can save the list as a template including content, and then create a new list based on this template.
Learn how to Save a SharePoint List Template:
http://www.fpweb.net/sharepoint-2010/tutorials/content/save-list-template/#
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Hyperlinks Not Function After Being Published

Hello,
I've recently switched over to iWeb 08 and really dig all the new functions. I am running into one spot of trouble and hope that someone might shed some light on it for me.
I've got a few images that I use as hyperlinks rather than text. The hyperlinks are fully functional while in iWeb and everything is fine in the inspector window, yet when I publish the site, the links are no longer operational. Some of the text links have now decided to stop working as well.
The non-functioning thumbnail links are at:
http://www.lolabydesign.com/LolaByDesign/Bead_Gallery.html
The non-functioning text links are at:
http://www.lolabydesign.com/LolaByDesign/Shop_Instructions.html
I publish to my desktop, then use Fetch to upload the files to my host at netrfirms.
This seems kind of random as other links on the site work fine, and I have never run into this problem before.
Anyone have a quick fix for this one? As the images are thumbnails which point towards the full-size image, using text is not an option in this case.
Thanks in advance!
~Lola

Hi,
there's this shapeimage
http://www.lolabydesign.com/LolaByDesign/ShopInstructions_files/shapeimage4.png
in front of the links, thus they do not work.
If you can send that to back (select, ctrlclicksend back)
Regards,
Cédric

Keybinds no longer functioning after latest XFCE4 updates

Just as the title reads - XFWM4 is no longer handling keybinds set with the xfce4-keyboard-settings applet. I have verified the permissions on the keyboards.xml in ~/.config/xfce4/xfconf/xfce-perchannel-xml, as well as the permissions for the folder. I have also tried deleting the file and using the applet to restore the defaults to no avail. Additionally when attempting to connect gdb to xfwm for debugging, the session becomes unresponsive until I kill gdb from a VT. No log output is provided from XFWM when spawned using "xfwm4 --replace"
To be clear: none of the keybinds work; whether set by me or a default. The xfce4-keyboard-settings applet does however correctly detect keypresses and does correctly input them into the configuration file.
The wave of XFCE4 updates in question are as follows:
[2015-03-21 11:47] [ALPM] upgraded libxfce4ui (4.12.0-1 -> 4.12.1-1)
[2015-03-21 11:47] [ALPM] upgraded xfce4-session (4.12.0-2 -> 4.12.1-1)
[2015-03-22 20:20] [ALPM] upgraded xfce4-power-manager (1.4.3-1 -> 1.4.4-1)
[2015-03-27 20:45] [ALPM] upgraded xfce4-session (4.12.1-1 -> 4.12.1-2)
I'm not sure what sort of logging I could possibly provide to help troubleshoot this; but I will probably try reverting packages systematically until keybinds are functionally restored.

Welcome to Apple Discussions.
You can create a new user account and check things there.
Can you ping your router IP?
Are you using any proxy servers? Can you get your email?
Mihalis.

After installing Mt.Lion on my 27" iMac (2010), my copy/paste and move files would no longer function after a few minutes of use. I re-opened in Safe Mode and found everything okay, so I was told it was a bad extension. Now what do I do?

I have tried to look for an extension like Air Print Activator, which I tried and ignored. I thought it might have some timing method that would stop my copying and pasting and moving files after a minutes ot two. So I re-installed the latest version and "uninstalled" it, hoping it would then remove an errant extension. But that didn't help. It seemed to start when I first tried out Mail and moving new emails into their mailboxes after reading. I tried to figure out how to do a Clean Install, too, but it would not allow me to "move" the InstallESD.dmg to a USB disk, "resource busy". Everyway I turn, I'm blocked from carrying out a method of finding the culprit, short of starting from scratch -- but losing years and years of mail, files, receipts, etc. It's just too much to sacrifice. I have no idea what to do next, since I have no idea what extension is causing it or how to isolate and destroy it. Any suggestion would be much appreciated.

You can try repairing the boot drive, Since you are running OS 10.6.8 you will need the OS DVD. Do you have it?
Please post back if you do, and need directions on how to do the disk repair.

Samsung SE-506 no longer functions after Yosemite update

I have a late 2013 MBP, was using Toast Titanium 11 for covering iMovie projects to burn onto Blu rays, with a Samsung SE-506. For the majority, had no issues, and successfully completed several projects - both to BR and DVD. After updating OS to Yosemite in the last 2 months or so, I have been completely unable to utilize the Samsung drive for this. Discs are never recognized, and I have tried 3 types (BR, DVD, DVD-DL). I've checked in hardware profiles, and the drive does show up correctly when connected.
Can anyone offer any other advice? I've checked in with Roxio community groups for help and no one has been able to find a fix from the handful of suggestions given there.

Try a new USB cable or better still, plug the USB cable into a powered USB hub.

External Hard Drive No Longer Working After Being Removed From Mac

The following issue is happening to two other mac users that i know and its quite frustrating.
So if an external hard drive is not ejected properly from a mac, it then cannot be recognised by any other Mac’s. This issue is not isolated to just one external hard drive.
Then if i plug the external hard drive/s into my 8 year old Dell (PC) it works fine.
Further to this when i check the hidden files on the PC it looks as though Old Apple imbeds the external HD with a bunch of useless hidden files, once these are all deleted it miraculously works again on the Mac’s.
Too bad if you only have a Mac Because if the Mac disk utility can read the External HD it says that the disk has crashed and needs to be replaced.
Nice one Apple...
So now for my questions.
Why does mac add hidden files to an external hard drive when not ejected properly that prevents it from operating again on a Mac ?!!!!
How do i prevent apple from adding these hidden files?

Can you see the drive in Disk Utility? If so, try selecting it and using the Mount button in the top menu. You can also run repair disk and repair permissions.

WHY DID MY PHOTOSMART 6510 STOP FUNCTIONING AFTER BEING GREAT!!!

why did my photosmart 6510 suddenly stop printing??

Hi RENTANURSE,
I'll need more information from here to assist. Is there an error when printing? Which type of computer are you using? What is the connection from the printer to the computer?
I was an HP employee.
Please mark the post that solves your problem as "Accepted Solution"

ADF Form no longer functioning after being wrapped in layouts.

Similar Messages

Maybe you are looking for