ADF: Page navigation and buttons stop working after a while

Hi all,
We have a web app built with ADF Faces/JDev 10.1.3 that runs in OC4J 10.1.2.0.2. Sometimes we encounter this problem in our JSF pages: after a while (can't relate to some particular action), all navigation in a page (links, tabs, buttons, etc) just stops working, i.e. you can click them, the server receives some request (we see this in the logs), but the desired action never happens. It's just like the page keeps refreshing all the time. There is no navigation out of the page at this point, it's completely stuck.
If, at the same time, we connect to the app from a different browser, it will work fine, but the first browser will remain in the faulty state.
I turned the enableTokenValidation in the pages on and off, but it seems to make no difference. Can anyone provide an idea about what might be going on?
Thanks,
Serban

Hello,
Any answer on this issue? It seems that ADF is pretty unstable if user clicks repetedly on the same submit button (like a double-click) or on different tabs on the old page, until the next page loads. We are using .jspx pages and combined with SSL access this behaviour is behaving even worser.
Basically we encounter the following problems:
1) It seems that users with not so good network access (and accessing ADF app on a SSL OC4J) still have access to the origin page until the target page loads on a submit. If they click a different button or tab on the origin page in this interval (waiting for their previous action to complete), they usually get a JavaScript error that will block the interface until they do a manual refresh (F5)...
This can be reproduced even on client machines with good network access if you click very fast on the same button twice or on two different submit buttons.
2) It seems that sometimes the browser keeps showing the loading bar in the status bar even if the new .jspx page is already loaded. Any advice on how to solve this, as the users might be tempted to push application buttons or browser navigation thinking that the page is blocked?
All the above happen on IE 6, which is the preffered browser.
Thanks! I can give you more details if needed.

Similar Messages

X121e touch pad buttons stop working after a while

Hello everyone,
I have a lenovo thinkpad x121e.
The buttons above the touchpad (for right and left clicking) and also the trackpoint stop working after a while (about 45 min). Although the touchpad itself works without problems.
If I reboot the operating system (Windows 7, 64-bit version) everything works fine for a while and then the buttons and trackpoint won't respond again.
It is always the same routine. Rebooting windows, everything alright, stop working, ...
I am using the newest driver version and de- & reinstalling of UltraNav haven't solved the problem.
Has anyone an idea what causes my problems with the touch pad buttons and how to solve it? (I guess it's not a hardware problem.)
Many thanks in advance.

Hi again, li-lup
I would recommend trying to use the standard Synaptics driver found here. Synaptics is the company that develops the UltraNav software, so there should be no loss of compatibility/features. I have witnessed several cases where this driver has helped others with mouse issues, so it may help yours as well.
The first thing you will need to do is to remove the UltraNav driver from the system. To do this, open the Start menu and type Device Manager into the Search box, and then press Enter. Once here, double click on Mouse and other pointing devices, and then right-click on the UltraNav device. Naviage to the Driver tab and select Uninstall... from the bottom of the window. Follow the prompts to uninstall and then restart when prompted by Windows. Windows should install a generic driver that will allow you to use the TouchPad when downloading the Synaptics driver.
Hope it helps,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Mouse and Keyboard stops working after a while

Hi, I'm not even sure where to start to find the cause of the problem. I have a normal ps/2 keyboard and USB optical mouse, both of them just stops working after a few hours. The light on the mouse just dies and the keyboard is not responsive at all. I have to do a hard reboot of my computer. How and where can I diagnose the problem? I noticed the problem started when I upgraded to the latest kernel.

And then after a while it will just use a new address:
Oct 31 01:47:15 wdesktop usb 1-1: USB disconnect, address 6
Oct 31 01:47:15 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 7
Oct 31 01:47:16 wdesktop usb 1-1: configuration #1 chosen from 1 choice
Oct 31 01:47:16 wdesktop input: Microsoft Microsoft Wheel Mouse Optical as /class/input/input8
Oct 31 01:47:16 wdesktop input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical] on usb-0000:00:10.0-1
Then after that my mouse is unusable, the following is shown:
Oct 31 01:48:41 wdesktop usb 1-1: USB disconnect, address 7
Oct 31 01:48:41 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 8
Oct 31 01:49:13 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 9
Oct 31 01:49:45 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 10
Oct 31 01:49:56 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 11
Oct 31 01:50:08 wdesktop uhci_hcd 0000:00:10.0: Controller not stopped yet!
Unplugging and plugging the mouse back does not work
I found a workaround for that by unplugging the mouse, removing the uhci_hcd and adding it back, so:
sudo rmmod uhci_hcd
sudo modprobe uhci-hcd
But I'm still not sure what causes the problem.
Last edited by willy (2008-10-30 15:02:54)

Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. Please help!

Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. I don't get a spinning ball, it just stops working at whatever page it's on. I can close the program just fine but when I re-open it, either safari or firefox, it freezes trying to load the hompage. This started a few days ago after trying to stream a movie on my computer. I'm on a Mac Air OS X Version 10.6.8 and have downloaded all updates. When I go into finder, it says I have over 80 gigs available. Is there some other memory cache that I need to check? Thanks so much for your help.

ejwoodall wrote:
It's not a router problem as I explained in my post. If it was a router problem then I wouldn't have the problem everywhere I go. It is an issue with the software.
Then I guess the millions of people running 10.5.7 with no issues are just hallucinating that their machines are working fine?
I'm not trying to belittle your issues; you're certainly having them and I know first hand how annoying an intermittent AirPort issue can be. (In fact, mine was due to an AirPort driver bug that no one else seemed to suffer from.)
The single best diagnostic you could do is take your system running 10.5.7 to an Apple Store, and try using their in-store network.
If your machine performs flawlessly, it may be a router issue.
If your machine has connectivity issues there, it may be a hardware problem with your machine.
There have been numerous people in multiple threads over the years who swore that an update was buggy because things used to work, but returned later to sheepishly admit that they took their machine in, a problem was found and fixed, and now their Mac works flawlessly with the newer software.
But simply reinstalling 10.5.5 in no way means the explanation of how firmware bugs may be at play here is incorrect.
In the context of that explanation, all you've done is possibly reinstall software that asks to add "2 + 3."

IPhone 5S home button stopped working after iOS 8.3 update

My home button stopped working after I updated it to the iOS 8.3. My finger print can still unlock the phone but the home button won't work.

What you are describing sounds more like a hardware issue than a software issue. Make an appointment at the genius bar of your local apple retail store and have the device evaluated.
Make a Genius Bar Reservation (or cancel an existing reservation)
http://www.apple.com/retail/geniusbar/
Sign in using your Apple ID

Windows 7 professional backup and restore stop working after installation of acronis true image 2010

HI,
windows 7 professional backup and restore stop working after installation of acronis true image 2010. it generates a error code 0x81000019. please help.
thanks
Song

Sankalp,
I too have the error 0x81000033 when running the full system image backup. I could not assign a drive letter to my 100mb drive with the Disk Management. So, I went into the diskpart and ran the following commands:
diskpart
list disk
DISKPART> list par
Partition ### Type              Size     Offset
Partition 1    System             100 MB 1024 KB           ( 78.2 of 96.0MB free )
Partition 2    Reserved           128 MB   101 MB
Partition 3    Primary             73 GB   229 MB
Partition 4    Recovery           423 MB    74 GB
sel dis 0
list par
select partition 1
assign letter=q
fsutil usn queryjournal q:
fsutil usn deletejournal /D q:
After diskpart, I opened the "My Computer" and see that I have 78.2 of 96.0MB free. Despite that, I ran these commands on the new q: drive:
C:\Windows\System32>q:
Q:\>fsutil usn queryjournal q:
Error: The parameter is incorrect.
The FSUTIL utility requires a local NTFS volume.
Q:\>fsutil usn deletejournal /D q:
Error: The parameter is incorrect.
The FSUTIL utility requires a local NTFS volume.
Q:\>
Any help is appreciated.

Pavilion g6 sound stops working after a while

Over the past week the sound in my laptop has begun to stop working after a while of the laptop being on. It works initially but after a while when I check it doesn't work anymore. The mute button does not mute work, the volume increse and decreases on the screen but it does not affect the absense of sound. Please Help.
System Details: HP Pavilion g6, Windows 8

HI. I'm having the same problem. This has been happening for some time now. I can play anything with sound and then it suddenly goes and I can't use the mute/on/off or work out what's happening. Is it a fault?

Volume and Lock buttons stopped working after new iOS 4.3.3 update (ipod 4th gen)

After I updated my ipod with the iOS 4.3, the volume and lock buttons stopped working.
This has happened before and it'sprobably one of the most annoying problems ever.
The lock button tends to stop working but then works again only when it wants to, but the volume buttons dont work at all.
When the locked button worked again I turned it off and turned it on again, but it didnt fix the problem.
I've pretty much tried everything that I've read and nothing seems to work.
So now, I don't know what to do.
Should I take it to a random apple store or to where I bought it from?
It seems that it's happening to almost everyone, so at least I'm not the only one and maybe someone can help me out

If you have restored in iTunes on a computer and the problem remains then it's a hardware fault and it needs to be repaired. When you update the iOS version on an iOS device it checks the hardware components, this is when it'll detect un-diagnosed hardware faults and the components will stop working... even if they were working previously

Toupad Tapping and Scrolling stopped working after Windows 10 Upgrade

Hi, I upgraded my OC to Windows 10 today, after the upgrade tapping and scrolling stopped working on the synaptics touchpad. the toucpad only finctions as a pointer now. for taps/Clicks i always have to use the buttons below the touchpad. It was working fine before the upgrade, the earlier OS was Windows 7 I have checked for driver updates but i get a message that the drvier is up to date.I have check the device setting and confirmed that tapping and scrolling is enabled.I have also done a device reset. Nothing solved the problem, i also did not find a relevant answer on the forums.Also, the same problem did not happen with my other HP laptop (Notebook PC) which was also upgraded to windows 10 recently. Does anyone have a solution? Regards,Siddharth.

, Hello and thanks for posting on the HP support forums. What you will need to do is the run the Windows Update Fixer tool. Here is a link to help you with that. Make sure you run all updates including optional. Fix Microsoft Windows Update Issues If that fails to work the only other option is to roll your system back to the original supported operating system that came with your notebook. Thanks again for the post and have a great day.

Bookmark bar and menu stop working after awhile on Firefox 12

I have upgraded to Firefox 12. Everything works fine when I start up Firefox, but after some amount of use (and I can't always reproduce this) eventually when I click on bookmarks in my Bookmark Bar or from the Bookmark menu, nothing happens. Firefox doesn't load the bookmark. If I open the "Show All Bookmarks" window and click on bookmarks there, they load fine and then the menu and bookmark bar suddenly start working again. If I close the "Show All Bookmarks" window the Bookmark Bar and menu stop working again.

Hi ischou,
I haven't heard of this particular issue, but you might want to try starting Firefox in [[Safe Mode]]. Let is sit for a while as you described above and if you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit. You should look at the [https://support.mozilla.org/en-US/kb/Troubleshooting-extensions-themes Extensions and Themes troubleshooting guide ] and the [[Troubleshooting plugins]] article as well.
You could also try [https://support.mozilla.org/en-US/kb/Managing-profiles?s=create+a+new+profile&r=2&e=es&as=s#w_creating-a-profile Creating a new profile].
Hopefully this helps!

Home button stopped working after 1 week

I've had my new iPad mini 2 for a grand total of 1 week and the home button stopped working. Fortunately Best Buy exchanged it for me. Is this a common issue?

No.

Mouse and Keyboard stop working after reboot

So far the computer is working great except for the fact everytime you reboot the keyboard and mouse stop working... I did a clean format x2 and put the service pack on and I am still getting the same problem.
Anyone have this problem or something similair ? Any ideas ?
Thanks in advance :-)

The problem is not your S/W install. It's with the MSI Motherboard. Your best bet is to ask MSI when a fix will be available, or go buy a different board.

Ver 4.0.1 for PC, why does my scroll wheel stop working after a while? Only happens with Firefox app.

Closing and relaunching solves problem for a while, but happens again after opening about 5 web pages.

Closing and relaunching solves problem for a while, but happens again after opening about 5 web pages.

In windows 8, web page buttons stop working after a period of time.

After purchasing a new laptop with Windows 8, I installed Firefox v21. After it runs for a period of time, buttons on web pages seem to quit working and also some drop down menus. Only fix seems to be to clear history cache and cookies and restart Firefox. It will work for a while, then I have to go through this process again.
Any ideas?

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

My lock button stopped working (after 4 months) and was wondering if there is any other way to take screenshots?? Please help! Thanks :)

My lock button just stopped working on my iPhone 4. I was wondering if there was any other way to take screenshots? Please help!!

Hi jess,
If your phone is only 4 months old, you should take it back to your Apple Store and have it replaced.
Cheers,
GB

ADF: Page navigation and buttons stop working after a while

Similar Messages

Maybe you are looking for