Administration: Selective Deletion of Buffered Field Information

Hi there,
Can anyone explain what the program: *UGMD_DEL_BUFFER*-- "Administration: Selective Deletion of Buffered Field Information" does??
I tried searching in help.sap.com/SDN but couldn't get hold of anything.
The description of the program was not too helpful.
Any help will be appreciated...
--Thanks

Hi ,
We have tried to understand this programe to use.
But we found no results in SDN, Note search or any other place..
Can you please help us to understand this "UGMD_DEL_BUFFER"
Thanks
Kamal

Similar Messages

Selective Deletion using 0REQUID & Date fields in combination

We are running SAP NetWeaver 2004s patch 15 I have tried to run a selective deletion with request ID and date fields but we are getting an SQL error. The cube is compressed but the requests I am after have not been compressed. Is this an activity I should be able to do? I have checked SAP messages and found one but it was for version much older than ours below is the error message I recieve in the Job Log.
Job started
Step 001 started (program RSINDEX1, variant &0000000000098, user ID BROWNAW)
SQL: 2010/12/16 15:06:21
CREATE TABLE "/BI0/0100000703" (DIMID INTEGER
NOT NULL) IN CMC#BTAB
SQL-END: 2010/12/16 15:06:21 00:00:00
SQL: 2010/12/16 15:06:21
insert into "/BI0/0100000703" SELECT DISTINCT
DIMID FROM "/BIC/DZFIGL_STGP" WHERE (
"DIM"."SID_0REQUID" = 109126
SQL Error: SQL0206N "DIM.SID_0REQUID" is not valid in the co ntext where it is used
SQL-END: 2010/12/16 15:06:21 00:00:00
System error: CREATE_TABLE_AS_SELECT/RSDU_EXEC_SQL /BI0/0100000703 206-
Job cancelled after system exception ERROR_MESSAGE

Thanks for the quick response. I have validated that the data ranges do exist for the requests. Part of our process is to use the same selection to output the data before the deletion is ran so we can validate the number of records that are purged and have a backup of the data in case another issue is discovered at a later date.
When I run this seleciton for output I get over 30k records. Unfortunately I cannot just blow away the requests as most contain data that needs to remain. As well as we use this as a source for delta records that come from multiple sources so the logistics of resetting the delta indicator on the requests and not screwing up other delta's is a big risk. If I should be able to run a selective deletion with request I am hoping SAP can respond with a fix to the issue.

Selection deletion to delete a field with no data.

Hi all,
The issue is that my ods displays data:
chart of accounts company code glaccount docnumber serialnumber
abcd 500 000005 1990001
abcd 500 000005 1990001 12334.
I need to delete the document number which doesnot have a serial number.
So, Can i use Selective deletion option and my selecting the serial number =
will it delete the records with serial number is empty???
So that the data in my ods will look show only:
chart of accounts company code glaccount docnumber serialnumber
abcd 500 000005 1990001 12334.
thanxs
haritha

hi,
Yeah to keep the data good looking. Since the data is in gbq. And there were repitive data. So, they want to remove all the data with serno which has empty space.
Will my query will work or not???
thanxs
haritha

Delete COPA value fields in a productive system

Does anyone have practical experience with deleting COPA value fields in a productive system?
The issue is that old, no longer used value fields should be deleted from a productive system to allow creating new ones, as the maximun number of value fields is reached.
An alternative would be to delete the prior transaction data captured on these no longer to be used value fields and rename them for their new use (to avoid that different kind of old and new data is reported on the same value field).
I am refering to the documentation on transaction KEA0 (or OSS note 160892 up to release 4.5), where it is mentioned that deleting value fields should only be done for operating concerns that have not yet been used productively. Did anyone do this already in a productive system?
Cheers, Peter

To delete characteristics or value fields, you should perform the following
activities:
1. Delete the corresponding characteristics and value fields from
Customizing in all clients (this includes forms, reports, planning
layouts, and so forth). To locate characteristics and value fields, use
the appropriate where-used list in the Customizing Monitor. You can
access it by choosing Tools -> Analysis -> Check Customizing Settings
(TA KECM).
You can jump directly from the where-used list to the relevant
Customizing transaction and then delete the appropriate field there.
2. Switch to the screen for maintaining the data structure of an
operating concern (Maintain operating concern).
3. If you need to effect other changes to the datastucture for the
operating concern before making any deletions, effect those changes and
save the data structure.
4. In order to be able to select the fields of the data structure,
choose Extras -> Characteristics (or Value fields) -> Unlock.
5. Select the characteristics and value fields to be deleted and remove
them from the data structure with the "Reset fields" function.
6. Reactivate the operating concern. The system starts by checking
whether the operating concern contains any data and whether the fields
to be deleted are still being used in any Customizing settings.
7. If none of the fields are still in use, the system then starts the
re-activation. If the operating concern does not contain any data or
does not require the database system to be converted, the tables are
activated. You are then able to activate the environment for the
operating concern. In this case, the following activities no longer
apply.
If the operating concern already contains data, a system message tells
you that the database needs to be converted. If you proceed, an
activation log appears (at the top of the list).
8. Analyze the activation log. If it only contains error messages
telling you to convert the tables, proceed with the next activity.
You must otherwise remove the cause of the errors before the tables can
be converted. In this case, you should answer "No" to the next prompt,
which asks whether the conversion transaction should start.
9. If you still only receive error messages telling you to convert the
tables, choose "Back" and start the conversion.
10. Plan a job for the conversion. A list of the tables to be converted
is shown for this. If the tables only contain a small amount of data
(less than 10 000 records), then all the tables can be converted in one
job. In that case, you can select all the tables.
For larger tables, conversion should take place in several jobs.
However, you should ensure that table CE4xxxx (where xxxx = operating
concern) is the last table to be converted.
Warning. No other changes can be made to the operating concern during
the conversion.
A copy of the table is generated during the conversion. The database
system should have sufficient memory available for this copy.
To schedule conversion as a job, use the "Schedule selections" function.
You can display the current status of the conversion by selecting the
"Refresh" icon. Tables disappear from the list once they have been
converted sucessfully. If a conversion is taking a while, it is also
possible to leave the transaction. You can then continue the conversion
using DB requests -> Mass processing in one of the following ways:
With the job overview. You access this by choosing System -> Services ->
Jobs.
Using the database utility transaction. You access this by choosing
Utilities -> Database Utility in the ABAP Dictionary menu.
You can use the status function to call up the status of the operating
concern during operating concern maintenance. You need to activate all
tables after conversion.
11. To analyze errors that have occurred during the conversion, you can
use the database utility transaction by choosing Extras -> Logs. The log
has the same name as the conversion job: TBATG-date. You can also
restart the conversion with this transaction.
For more information on the database utility, choose Help -> Application
help while still in the above transaction.
12. Once you have activated all the tables in the operating concern,
generate the operating concern environment from within operating concern
maintenance.
You can then use the operating concern again.
Please, refer to the IMG documentation under Controlling ->
Profitability Analysis -> Structures -> Define operating concern
-> Maintain operating concern, for further details.
Hope it helps

I purchased a used 2008 iMac. And although the previous owner said he deleted all of his information his iCloud account is still the primary. I don't have a clue about what to do about it. I signed him out and logged in with my info, but still no go.

I purchased a used 2008 iMac. And although the previous owner said he deleted all of his information, his iCloud account is still the primary. I don't have a clue about what to do about it. I signed him out and logged in with my info, but still no go. Is there any way to eliminate his iCloud account and make mine the primary without rebooting it back to factory settings? There was an update, I believe, that I couldn't install because i didn't have his password that is what made me aware that his acct. was still active. I don't know what to do. Any help is greatly appreciated. Thank you.

Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
          OS X 10.7 or later was installed by the previous owner
          The startup volume was encrypted with FileVault
          You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

Selective deletion based on Calendar Year/Month in process chains

Hi all,
I have a requirement from the business wherein I have to delete the past months data before I load the same data into 6 infocubes using a process chain.
I checked the forums to understand how selective deletion is used in a process chain and I have come to know that RSDRD_DELETE_FACTS program or DELETE_FACTS Tcode can be used to generata a G* program that performs the deletion.
I am to integrate this generated program in my process chain. I have 0CALMONTH(Calendar Year/Month) as the time characteristic in all my infocubes and therefore the only time characteristic available for selective deletion.
My problem is that I am unable to create a dynamic selection for the Calendar Year/Month such that it takes the previous month.To be exact I am unable to use the "D" option in the Selection Variable column for this characteristic.
Please can somebody help me out with this.

Hi,
Use this ABAP program code in your Process Chain...
Type Pools
    TYPE-POOLS: rsdrd, rsdq, rssg.
Local Internal Tables
    DATA: lit_msg     TYPE rs_t_msg,
                lit_sel     TYPE rsdrd_thx_sel.
Local Work Area
    DATA : lwa_sel_kf1     TYPE rsdrd_sx_sel,
               lwa_range_kf1 TYPE rsdrd_s_range.
Local Constants
    CONSTANTS :    lc_i(1)      TYPE c VALUE 'I',
                             lc_x(1)      TYPE c VALUE 'X',
                             lc_eq(2)     TYPE c VALUE 'EQ',
                             lc_kf1(11)   TYPE c VALUE '0CALMONTH'.
    CONSTANTS :   lc_cube      TYPE rsddatatarget VALUE 'Z_C21'.
Delete Existing cube records
Key Field 1 (CALMONTH)
      lwa_range_kf1-sign    = lc_i.
      lwa_range_kf1-option = lc_eq.
      lwa_range_kf1-high    = space.
      lwa_range_kf1-keyfl   = lc_x.
      lwa_range_kf1-low     = <Value of CALMONTH>.
      APPEND lwa_range_kf1 TO lwa_sel_kf1-t_range.
      CLEAR lwa_range_kf1.
       lwa_sel_kf1-iobjnm = lc_kf1.
      INSERT lwa_sel_kf1 INTO TABLE lit_sel.
      CLEAR : lwa_sel_kf1.
Selective Deletion through FM
      CALL FUNCTION 'RSDRD_SEL_DELETION'
        EXPORTING
          i_datatarget      = lc_cube
          i_thx_sel         = lit_sel
          i_authority_check = space
          i_mode            = lc_c
          i_no_enqueue      = lc_x
        CHANGING
          c_t_msg           = lit_msg
        EXCEPTIONS
          x_message         = 1
          inherited_error   = 2
          invalid_type      = 3
          OTHERS            = 4.
      IF sy-subrc = 0.
        REFRESH : lit_sel[],
                  lit_msg[].
      ENDIF.
Thanks,
Saru

How to delete custom AET fields in CRM 7.0 Web UI

Hello gurus,
When I want to delete a custom AET field created by a mistake or for exercising purposes only, the UI Config tool markes it for deletion by changing a status to "Marked for Deletion" (a garbage bucket icon). My question is how to proceed further, i.e. eliminate the field completely. Do I need to manually delete the fields from the "Append" structures in the corresponding CRMS_xxxx Attribute structure, or do something like this?

Hi,
note: please do not delete the field manually from SAP GUI.
AET is able to create and delete custom field. The deletion process happens always in 2 steps.
1. you select which field you want to delete and press on delete icon. This will mark the field to be deleted.
As long, you do not "Save and Generate". This deletion mark will not be persisted and the complete deletion of the field will not be executed. Having this mechanism, you are always able to cancel the deletion.
2. If you really want to delete the field. Press on "Save and Generate". "Save" will persist the deletion mark for the field.
And "Generate" will do the "Delete" generation.
Please don't forget to remove the field from the UI configuration, when you configured the field in any UI Config before.
Regards,
Steve

Selecting text in a field

Good morning everyone
I'm playing around with a textfield today where I want to have some default text showing by default and when I go into the textfield box, the text would all be selected by default so that the user as an easy time removing it from there.
Right now, I add my values to the object.default ="please choose one". That works ok, now how can I have the text selected when user puts the focus in that textbox? I cant seem to find anything that can do that.
Does anyone have an idea if that's doable or not?
thank you so much again.
Pat_rick

Hi there,
there is an easy way to do this without having to select/deleting the text in the textfield
it is called ghost text, it is simply a display pattern for fields when they equal a null value..
just go in that textfield you are talking about, in the Object properties / Field tab click on the Pattern button..
once in the Pattern dialog box, make sure you are in the display tab,
then under Pattern, just write in the textbox : null{'Please choose one'}
This should do the trick
Hope this help!

Select a number of fields between one field and another

Hello,
Is there any way to make a SELECT to show a number of fields between one field and another,
without writting all the fields one by one ?
For example, I have one table with these fields:
TABLE EMPLOYEE:
ID_EMPLOYEE NAME PHONE CAR AGE MARRIED
and I just want to make a SELECT who shows only fields from NAME to AGE, but i don't want to
write in the SELECT all the fields one by one.
Is this possible?
Thank you very much.
Sorry for my english it's not very good.

Swam wrote:
Hello,
Is there any way to make a SELECT to show a number of fields between one field and another,
without writting all the fields one by one ?
For example, I have one table with these fields:
TABLE EMPLOYEE:
ID_EMPLOYEE NAME PHONE CAR AGE MARRIED
and I just want to make a SELECT who shows only fields from NAME to AGE, but i don't want to
write in the SELECT all the fields one by one.
Is this possible?
Thank you very much.
Sorry for my english it's not very good.If you use the DBMS_SQL package to execute your query you can reference the columns by position rather than name.
One examples of using DBMS_SQL package:
SQL> ed
Wrote file afiedt.buf
1 DECLARE
2    cur       PLS_INTEGER := DBMS_SQL.OPEN_CURSOR;
3    cols      DBMS_SQL.DESC_TAB;
4    ncols     PLS_INTEGER;
5    v_min_col NUMBER := 2;
6    v_max_col NUMBER := 4;
7    v_val     VARCHAR2(4000);
8    v_bindval VARCHAR2(4000);
9    v_ret     NUMBER;
10    d         NUMBER;
11 BEGIN
12    -- Parse the query.
13    DBMS_SQL.PARSE(cur, 'SELECT * FROM emp', DBMS_SQL.NATIVE);
14    -- Retrieve column information
15    DBMS_SQL.DESCRIBE_COLUMNS (cur, ncols, cols);
16    -- Display each of the column names and bind variables too
17    FOR colind IN v_min_col..v_max_col
18    LOOP
19      DBMS_OUTPUT.PUT_LINE ('Column:'||colind||' : '||cols(colind).col_name);
20      DBMS_SQL.DEFINE_COLUMN(cur,colind,v_bindval,4000);
21    END LOOP;
22    -- Display data for those columns
23    d := DBMS_SQL.EXECUTE(cur);
24    LOOP
25      v_ret := DBMS_SQL.FETCH_ROWS(cur);
26      v_val := NULL;
27      EXIT WHEN v_ret = 0;
28      FOR colind in v_min_col..v_max_col
29      LOOP
30        DBMS_SQL.COLUMN_VALUE(cur,colind,v_bindval);
31        v_val := LTRIM(v_val||','||v_bindval,',');
32      END LOOP;
33      DBMS_OUTPUT.PUT_LINE(v_val);
34    END LOOP;
35    DBMS_SQL.CLOSE_CURSOR (cur);
36* END;
SQL> /
Column:2 : ENAME
Column:3 : JOB
Column:4 : MGR
SMITH,CLERK,7902
ALLEN,SALESMAN,7698
WARD,SALESMAN,7698
JONES,MANAGER,7839
MARTIN,SALESMAN,7698
BLAKE,MANAGER,7839
CLARK,MANAGER,7839
SCOTT,ANALYST,7566
KING,PRESIDENT,
TURNER,SALESMAN,7698
ADAMS,CLERK,7788
JAMES,CLERK,7698
FORD,ANALYST,7566
MILLER,CLERK,7782
PL/SQL procedure successfully completed.
SQL>Of course, if you were going to do this properly you would bind the correct datatypes of variables based on the types of the columns (the type information is also available through the describe information)

How to add into dynamic selection criteria (FBL1N) - custom field from LFB1

Hello all,
i have following problem. I added new customer field into table LFB1 (Z* field). And now i need to use this field as dynamic selection criteria in transaction FBL1N. I enhanced selection view for logical database KDF - i have created new customer view and I added my new field from LFB1. It is OK, i see this field in dynamic selection criteria in FBL1N but if i try to select according that Z* field, short dump occured.
open cursor with hold LC_KRED for select (VF_KRED_FIELDS)
        from <b>VF_KRED</b>
          where LIFNR in KD_LIFNR
          and   BUKRS in KD_BUKRS
          and   LAND1 in KD_LAND1
          and   KONZS in KD_KONZS
          and   VBUND in KD_VBUND
          and   AKONT in KD_AKONT
          and   BUSAB in KD_BUSAB
          and (VF_KRED_WHERE)
Problem is in VF_KRED - this is database view (LFA1 joins LFB1). This view has no Z* fields and therefore it cannot be use in statement above -> dump.
Is needed repature of standard - enhancement of view VF_KRED?
Thank you very much.

Hi guys,
thanks so far. I managed to show prompts in the report. But still my problem is nor 100% solved
I would like t achieve that the filtered criteria in the report title is separated through a comma like in the report filter summary - e.g.: {001, 002, 003, 004} followed by just 1chart/table that is including the whole information.
When I however just drag a variable into the report it automatically created different sections, right? Like ........ table, chart, whatever... .......table chart whatever........
Regards

My cursor does not move to the confirmation box after selecting delete

When selecting 'Delete' for an email for instance, the cursor would then move to the confirmation box but with Firefox 4 this does happen now.

Out of curiosity, are you using 'NoScript' or anything of the like?
This occurrence happened to me on the Google page and I figured out that 'NoScript' was blocking Google therefore not allowing the cursor to activate in the search input field. I simply ''allowed'' Google.com and I had no problem thereafter. Perhaps you have a similar problem.

Deleting AET custom field from the SAP tableu2019s level.

Hi experts,
I am deleting few un-used custom fields in AET. I am able to see delete symbol as status in AET. Although deleted custom fields are present in lot of structure and tables (eg: CRMD_ORDERADM_H) in SAP GUI tables. I want to delete the custom field from SAP GUI tables and structures.
I tried to delete custom field from the SAP GUI tableu2019s level. But it is not allowing.
Please get me some clue on deleting custom field from the SAP GUI tableu2019s level.
Thanks in advance
Chand

Hi,
The deletion of custom field in AET happens in two steps:
1. You select a custom field that you want to delete, than you press on the delete icon in the Custom Field Assignment Block.
Doing this, you mark the selected custom field to be deleted.
2. You press on "Save and Generate" button. The "Save" will persist the deletion mark of the custom field. It means the custom field is marked to be deleted in the database. The "Generate" will process all the deletion of objects which are needed to delete the custom field, for example: Domain, Data Element, Append, etc.
If the "Generate" does not happen due any reason, the deletion mark is already persisted in DB. It means, later on if you go back to AET, you will see that the custom field is marked to be deleted, but it is not yet deleted.
If you do not press "Save and Generate" button at all, it means, you do not persist the deletion mark in DB. Later on if you go back to AET, you won't see that the custom field marked to be deleted.
Note: Please make sure, "Generation" is only applied for field that is flagged to be generated. The "Generate" flag column is by default hidden. You can use personlization to show the column.
Regards,
Steve

How to automate selective deletion of ods in process chain

Hi,
How can we automate selective deletion of ods in Process chain. I tried with the proceedure. Using T-code "delete_fact" I gave selection parameters and Name of the program and saved this as variant and gave the same program and variant in Process cahin. But it is not deleting data. So plz guide me whether I have missed anything in this proceedure.

Hi purushottam,
you have to give to program variants in the process chain for data deletion to take place. in the first program variant include the rsdrd_delete_facts as program name and in the program variant give a variant for your infoprovider selection.
Now again select another program variant and include the name of the program which you get after selecting the infoprovider name and the generate selection program option in the "program for deleting selected entries from the data target" screen " and press execute.
again give another variant for your field selection.
now try execute the process chain.

Error in Selective deletion of cube

HI
I want to delete all the records in a cube based on the values in a field say VGUID.
i have generated the selective deletion pgm from 'RSDRD_DELETE_FACTS' and i am submitting all the values in the field VGUID to this in a report program.
SUBMIT gp46pdkfwf255w7uqo4y2i8sx2h WITH c007 IN ra_vguid.
ra_vguid contains all values that need to be deleted from the cube.
this works fine for a small number of VGUIDs but fails for large sets(3,000 records) giving system error.
System error: CREATE_TABLE_AS_SELECT/RSDU_EXEC_SQL /BI0/0100000074 0
Message no. DBMAN100
Diagnosis
A system error with the following parameters has occurred in the data manager:
Parameter 1 = &v1&
Parameter 2 = &v2&
Parameter 3 = &v3&
Parameter 4 = &v4&
How can I delete all my candidate records from the cube?
Thanks in Advance
Biyaz

Hi Srinivas
i tried to split the VGUID list ( 100 records ). first 100 records are deleted but the rest records are not deleted . is there a problem with my code?
REFRESH ra_vguid.
CLEAR wa_vguid.
CLEAR wf_count .
LOOP AT tb_vguid INTO wa_vguid.
wf_count = wf_count + 1.
ra_vguid-low = wa_vguid-/bic/yc1vguid.
ra_vguid-sign = 'I'.
ra_vguid-option = 'EQ'.
APPEND ra_vguid.
CLEAR wa_vguid.
IF wf_count = 100 OR
sy-tabix = wf_max.
Now call the Deletion program and pass the ranges as parameters.
SUBMIT gp46pdkfwf255w7uqo4y2i8sx2h WITH c007 IN ra_vguid.
REFRESH ra_vguid[].
CLEAR wf_count.
ENDIF.
ENDLOOP.

Selective deletion of a row from a cube

Hi Friends,
I need to delete a row from a cube through selective deletion from manage tab. I had struck while giving selecting the criteria for that deletion.
My Quesion is;
1) What criteria i need to give to delete the row apart from business related information?
2) What is data packet SID ? what i have to mention in that column?
3) What is Request id SID? what i have to mention in that column?
Please help me on the above issue.
regards,
Mahesh

Hallo
Of xourse you do it for example from Infoprovider, right click maanage, Content (first tab) Selective deletion.
Then you get a tab where you can schedule the job according to the selections in the tab Selective Deletion where you can set a filter for the characteristics included in the Cube.
You can select single Characteristics vlue oder range or multiple.
If you want to dlete a record than you have to know the key of this records. For example if you have
customer
company
month
if you select only month, then you delete all month but if you restrict to month and cusotmer than you delete the combination of them.
Reuest sid is the identifier of the request which you see on the tab manage of the cube. you select on that and in this case you will delete all request it means all records loaded with the request.
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Mike
Best Regards
Mike

Administration: Selective Deletion of Buffered Field Information

Similar Messages

Maybe you are looking for