Administrator access after user domain change

Hi,
my windows user was migrated to other domain. Now I haven`t administrator acces to Analysis service. I can connect by linked server as remote user in old domain, but I see nothing.
Is any chance to get full access or I must reinstall all server with new user?
Many thanks
Tomas Adamek

Hello Tomas,
With a local admin account on the machine where SSAS is running you can add your new Domain account to the security Settings of SSAS.
Start SSMS explicit as admin with right-mouse click => "Run as Administrator", logon to SSAS, open the properties of the Server => Security.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Similar Messages

Problem with tab access after user deleted from group

9ias version 9.2.0.1
There seems to be a problem (potential bug???) when deleting a user from a portal group. I have a portal page set up with multiple tabs. These tabs can only be accessed by users belonging to certain portal groups. When i add a user to a group, the user sees the necessary tabs when authenticated. However, if i delete this user from the group there is a problem. When the user re-logs into portal, they will see all the tabs belonging to the group they were deleted from. However, when they select this tab nothing happens and the portal goes into a state of flux (doesn't navigate). One way to resolve this is to go in as a portal admin, edit any tab and select apply. The portal then seems to refresh.
This solution isn't practical. Is this a bug? Is there a patch or another solutions??? Thanks

Hi Turloch! Thanks for your help!
Those SQL Statements were extracted from the MS Access application that we will continue to use to access the data , now on an Oracle Database.
I don't know what I can do to make this kind of statements works as it is on Access database. The first query, that I called Query1 works fine on Oracle, I just mentioned it because the 2nd Query , named Query2, use it.
I'm not able to understand why when I change the 1st. query to a "make-table" query the Query2 works as desired, but if I keep the Query1 and Query2 as it is on the MS Access Application I got the ODBC error message and the ORA-00904 error message , related (I think!) to the FieldTmp field used on the LEFT JOIN statement (AND).
As I told before, if I change the AND clause to compare to another field, as instance, field1 :
FROM Query1 LEFT JOIN Table3
ON (Table3.field1=Query1.Field2) AND
(Table3.field5 = Query1.Field1)
it works.
Please, is there anything that I can do to keep the MS Access Application unchanged?
Oracle = 8.1.6
Oracle ODBC Driver = 8.1.6.4
Oracle Migration Workbench = 1.3.1
Thanks in advance,
Elaine Viel Denadai

HELP!!! I can't access BC's administration panel after forwarding domain...

I messed up my domain pointers by adding a forwarder and now my site is pointing to a different website. How do I change this back? Every time I try to login to the BC's administration it re-directs me to the new domain, so I can not administer the site anymore. The old/original domain was http://www.palominolarchmont.com and now it redirects to http://www.ironhorselarchmont.com. We will be changing the name in a few days but for now I would like it to remain as the old/original domain. Also, can you give me detailed instructions on how to do this correctly when the name change goes into effect? I tried adding a .htaccess file but that didn't work either. This is very frustrating, please help.

Hi Eric,
In such cases you can always use the system URLs to login in your sites and manage it - palominorestaurant.businesscatalyst.com and palominorestaurant.worldsecuresystems.com
Adding a .htaccess file will not work with BC, here is what you need to do in order to redelegate a domain over to us - Redelegation - Pointing your domain to our name servers from a domain registrar
Hope this helps,
Mihai

Accessing iTunes after User ID change?

I've had an iTunes account for some time that was setup with my previous email address as my user ID. Just got a new iPod and when I go to iTunes to download more music it still has my old user ID, for which I don't remember the password. I changed my Apple User ID to my new email address and setup a new password but my iPod is still showing my old iTunes User ID. What to do?

Ray,
On your iPod Touch, head to Settings -> Store and tap the Sign Out button. Then sign back in with your new account credentials.
B-rock

Dbconsole does not work after windows domain change

I have change windows domain of a oracle 10g server when it was already installed. After that, I can not install dbconsole in a new instance. The service starts but the login screen does not appear.
Does anyone have any idea ?

Have you tried to start directly with the emctl command directly on the command line?
What's the error message displayed.
When you change your domain the asociated configuration file is not matched, and emctl is unable to find it.
You should try to locate a directory named like this: FullyQualifiedHostName_InstanceName
Once you have changed the domain, oracle is unable to find a configuration with the domain previously stated. You'll have to reconfigure and may be recreate your repository.
Commands follow:
set oracle_sid=YourInstanceName
emctl stop dbconsole
emca -repos recreate
emca -deconfig dbcontrol db
emca -config dbcontrol db

The OS is not starting anymore on my Imac after user rights change

Boot process seem to stop on the grey screen (the apple logo one) but still checking something... before that I just create a new account and add this user with W/R rights on the full HD (Macintosh HD information windows). AND I've lost my recovery disk so I cannot use it.
Anyone got any idea?

Contact AppleCare to get a replacemnt set of discs, the cost is nominal.
Roger

My user was changed to standard how may I obtain administrator privilege again

My user was changed to standard how may I obtain administrator privilege again

My user was changed to standard how may I obtain administrator privilege again

First operation confimed - after system allowed changed order qty

Hi,
Production order first operation confimed - after user go change the produciton order qty, how to control this one, we need to config once first operation confirmed can't change the order qty. pls advise
ex : when create production order 10001234 qty 100 pcs, has oper 10,20,30,40
shop floor confirmed operation 10th 100pcs, after user change the qty 200 pcs, how to control this issue? pls
Thanks,
Sankaran

Hi Muthu
No need of exits , this can be done using status profile.
1>Create status profile using BS02.
2>give status no 10 as initial & 20 as the next .
3> in lowest & highest for 10 give as lowest 10 & highest 20 . For status 20 give lowest & hightst both as 20.
4> double click on status 10 & click on create & set what all business transactions u want to allow when the status is 10.
5> double click on 20 & tick on the radio button set against the partial confirmation button so that when the order is partially confirmed the status is automatically set to 20. in this status do not allow change prod order business transaction.
This should solve ur problem . Explore more about status profile in spro>production>SFC> order>create status profile documentation.
Thanks & regards
Prasad
Reward if useful.

After trying to change permissions on my computer so others on my network can access files, my external Hard Drive has a lock on it and I can't access files. I've tried repairing permissions, logging in under another Administrator account, using Terminal

After trying to change permissions on my computer so others on my network can grab files, my external Hard Drive has a lock on it and I can't access files. I've tried repairing permissions, logging in under another Administrator account, using Terminal to fix the problem, downloaded BatChmod but nothing works… Any other suggestions? I have an Imac running OS10.6.8.

There is suddenly a lock icon on my external backup drive!
Custom Permissions

Cannot access Exchange Mgmt Shell - user "Domain\Administrator" isn't assigned to any management roles

This is a new domain-joined Server 2012 member server with no data. Domain Administrator account is in the Organization Management group. Domain functional level is Server 2012.
Setup /m:RecoverServer fails because "...server roles are already installed..."
Uninstall fails because the "mailbox database contains one or more mailboxes..." which I can't delete.

Hi,
I recommend you refer to the following article to troubleshoot the issue:
https://social.technet.microsoft.com/wiki/contents/articles/14874.error-the-user-domain-localusersadministrator-isnt-assigned-to-any-management-roles-on-exchange-2010-management-console.aspx
we may try to propagate the RBAC permissions for the user again! procedure is as below:
1.
Open Windows Powershell as “Run As Administrator”
2.
Load the setup Snapin with the command: Add-Pssnapin *Setup*
3.
Run the commands one after the other to propagate the RBAC to the user who is logged on to the Exchange Server.
a. Install-CannedRbacRoleAssignments –InvocationMode Install
b.
Install-CannedRbacRoles
c.
Install-CannedRbackRoleAssignmentsRAP
d.
Install-CannedAddressLists
Thanks.
Niko Cheng
TechNet Community Support

Find out who has given local administrator rights to standard domain user?

In my Organization i have faced problems with domain administrator, it seem that all of a sudden a standard domain user is having Local administrator rights. Can anyone please help me how to find out who has given local administrator rights to that standard
domain user account?

Hi,
Based on your requirement, you need to enable the auditing in your Active Directory to identify the user/ group changes and WHO made the change etc.
Checkout the below steps to enable auditing for AD User Changes,
1. Open GPMC console, click Start --> Administrative Tools --> Group Policy Management.
2. Right click the Default Domain Controllers Policy, and then click Edit.
3. Navigate to Audit Policy node, “Computer Configuration/ Policies/ Windows Settings/ Security Settings/ Local Policies/ Audit Policy”.
4. Now enable the Success auditing for - Audit Account Management and Audit Directory Service Access.
5. Execute the command “GPUPDATE /FORCE” in the Domain Controller to force apply the GPO settings.
For Windows Server 2008 R2 and later versions, additional configuration is required in “Advanced Audit Policy Configuration” section in Default Domain Controller Policy.
1. Go to the node DS Access (Computer Configuration/Policies/Windows Settings/Security Settings/Advanced Audit Policy Configuration/Audit Policies/DS Access.)
Enable Success auditing for the following settings
- Audit Directory Service Changes
2. Go to the node Account Management (Computer Configuration/Policies/Windows Settings/Security Settings/Advanced Audit Policy Configuration/Audit Policies/Account Management.)
Enable Success auditing for the following settings
- Audit User Account Management
After completing the audit settings, configure SACL in Active Directory Users and Computers console for enabling the geneartion of AD Change events in the eventlog as shown below,
Checkout the below KB article on complete list on Event ID and Description for AD Changes,
http://support.microsoft.com/kb/947226/en-us
Regards,
Gopi
JiJi Technologies

We have two users that have been using Creative Cloud for almost a year. Recently, sometime in the last 4ish weeks, the users can no longer run Creative Cloud apps. (Yes, our subscription is paid.) Error simply says administrator access is required

We have two users that have been using Creative Cloud for almost a year. Recently, sometime in the last 4ish weeks, the users can no longer run Creative Cloud apps. (Yes, our subscription is paid.) Error simply says administrator access is required to install. The apps have already been installed. The users cannot run them unless they are in the local admin group.Using "Run as admin" does not work. It gives the same error.
I have opened a case with adobe support and was basically told to suck it up and put the users in the admin group. Actually, what was said was that it is "mandated that the users have administrative rights".
There are a couple of things wrong with this. It was working for both users until recently - a recent required creative cloud update. The users have never been local admins yet the apps were working (poorly, but working).
We are in an enterprise environment and users simply do not have administrative rights on the computers.
I have changed permissions on all adobe folders, granting users or authenticated users modify or full control rights, did the same in whatever Adobe registry HKLM keys I could find. Nothing has allowed the users to run the apps - unless they are put in the local admin group.
Someone has to have a fix for this. Adobe apps have proved to have far too many vunerabilities to even entertain the idea of elevating user rights. I can't imagine that enterprise environments are allowing this.
Any help or suggestions are greatly appreciated.

Jeff,
Thank you for your response. The users in question are "standard" domain users. We do not reduce users permissions below the standard level.
The apps do not load with their current standard user permissions.
The thing that makes this odd, is that up until recently they did this issue with cloud apps. The only way I can make it work for them now is to put them in the local administrator group on their pc's - which is not going to happen.
This is what they now see. As I said before, this was not a problem up until recently they would see all their available apps. If I put them in the local admin group the apps are listed without having to install. Everything is there, just not accessible to the user.

Limit Administrator Access to only OS Level functions on a Windows 2003 (and up) Domain Controller Server

I have read several articles such as:1.  <a href="http://social.technet.microsoft.com/Forums/windowsserver/en-US/9c723f4a-51a7-4844-9dc6-0017355d694c/limited-administrative-on-domain-controller?forum=winserverDS">http://social.technet.microsoft.com/Forums/windowsserver/en-US/9c723f4a-51a7-4844-9dc6-0017355d694c/limited-administrative-on-domain-controller?forum=winserverDS</a>2. 
Active_Directory_Delegation.docConsider that a domain controller, doing no other functions than domain based functions (ie no file server, printer or app server) - is managed in two parts:  The OS-only level, to read log files,
server health monitoring, install OS-level Micrsoft security patching and the second part being Domain management level - Users and Computers, Domains and Trusts, etc).For a given domain controller server, an outsourced support group needs
to be responsible for the OS-only level access - they need no access to the Domain management level functions so they can fufill contractual obligations (SLAs) for server uptime, patching etc.  For the same given domain controller
server above, there is an internal (non-outsourced) support group that will perform all Domain management level functions only.  They want to manage the Domain on the Domain Controller servers, want the Outsourcer to manage the VM and OS-related tasks,
but DO NOT want them to be able to access and change information in Users and Computers, Domains and Trusts etc.  With that explaination, would putting the Outsourcer's AD-based account IDs in the Server Operators group alone be
sufficient to allow OS-level management, like patching, reboots, etc but disallow access to Domain Management functionality (Users and Computers etc) - or does it need to be a combination of built in groups and delgated rights?Please consider
that I am seeking a technical solution here - do not respond with "either trust your Domain Administrators or keep your junior admins from the server" as that is not a viable solution.  
Jason B. Allen

Hi Jason,
According to your description, you want to assign the OS-level management and Domain management rights to two groups separately, right?
Based on my research, members of Server Operators group don’t have sufficient rights to install updates for Domain Controllers, you can refer to this article below:
Default groups
http://technet.microsoft.com/en-us/library/cc756898(v=WS.10).aspx
You can configure Allow non-administrators to receive update notifications group policy so that non-administrative users will be able to install all optional, recommended, and important updates content for which
they received a notification, except some updates which contain User Interface, End User License Agreement and so on, which still require domain admin credentials.
To enable non-administrator users the ability of logging onto and shutting down DCs,
Allow logon locally and Shut down the System rights should be granted.
In addition, reading logs and monitoring server performance rights are included on Performance Log Users and Performance Monitor Users groups.
More information for you:
Step 5: Configure Group Policy Settings for Automatic Updates
http://technet.microsoft.com/en-us/library/dn595129.aspx
User Rights Assignment
http://technet.microsoft.com/en-us/library/cc780182(v=WS.10).aspx
I hope this helps.
Amy Wang

Cn=Users domain is not displaying after configuring new object class in OAM

We have configured a custom object class which inherits inetorgperson objectclass and reconfigured OAM. After the reconfiguration cn=Users is not available in OAM Attibute Access Control Management domain selection,Delegated Administration domain selection , Workflow Definition -workflow domain selection and searchbase domain.
If anyone has faced similar issue,please reply back.
Thanks inadvance.
Regards,
Srikanth

> I cannot RDP using the user
Any error message?
Greetings/Grüße,
Martin
Mal ein
gutes Buch über GPOs lesen?
Good or bad GPOs? - my blog…
And if IT bothers me -
coke bottle design refreshment (-:

Database Studio 7.9.08.09 - Could not access to user management; Deleting old settings and reinstallation did not bring a change -- database studio deinstallation cannot be performed anymore

Hi Community,
for a few months I have been struggling with a SAP Max DB database Studio issue and finally, I had to give up the idea of being able to fix this on my own. I am desperately seeking for help and I hope that you may be able to give me a hint, advice or even a solution.
This is what happened:
I used to run Windows 7 on 32bit. I also had Database Studio installed - which was running fine then.
After a harware upgrade, I am running now Windows 7 on a 64 bit System. All my files from my local disk (C:\) have been restored and copied onto my new system.
I reinstalled Database Studio Version 7.9.08.09 onto my new System. But on the first try to start the program I received the error that said "Could not Access to user Management.See Window -> Show View-> Event Log Viewer for more Details."
However the Event Log Viewer was empty.
After searching the web for a solution, I followed the advice given in this community and deinstalled Database Studio and deleted the C.\Users\MyAccount\sdb folder manually.
I reinstalled Database Studio and started it as Administrator.
However, the error is still appearing.
And, what makes it even worse is : now I am not able to uninstall Database Studio anymore.
When I run SAP MaxDB Installation Manager and select the instance of database Studio to be uninstallled I am receiving the error:
"ERR: Unhandled Exception: Can't call method: "GenPackageList" on an undefined value at SDB/Install/Gui/Dialogs/SelectInstance.pm line 328"
Any advice is highly appreciated.
Thanks,
Agnieszka

Hello Yashwanth,
thank you for your quick Response.
Yes, I downloaded and installed the 64 bit Version of dbstudio.
I downloaded and ran the following .exe file: maxdb-studio-win-64bit-x86_64-7_9_08_09.exe
I am running the following Java-Version:
Java Plug-in 1.6.0_45
Using JRE version 1.6.0_45-b06 Java HotSpot(TM) Client VM
I myself am not a SAP customer. However, the Company I am working for is a SAP customer.
Can you explain in Detail, how to create a ticket with SAP?
Thanks,
Agnieszka

Administrator access after user domain change

Similar Messages

Maybe you are looking for