ADO Error in SSIS

Can somebody help me with my syntax?

In my ADO.NET Data flow I get this error in ssis
These are my settings:
Policy Current(New)
MaxPoolThreads 4
MaxDatagramRecv 4096
MaxReceiveBuffer 10485760
InitRecvTimeout 120
MaxConnections 5000
MaxConnIdleTime 900
MaxPageSize 1000(1000)
MaxQueryDuration 120
MaxTempTableSize 10000
MaxResultSetSize 262144
MinResultSets 0
MaxResultSetsPerConn 0
MaxNotificationPerConn 5
MaxValRange 1500
ThreadMemoryLimit 0
SystemMemoryLimitPercent 0

Similar Messages

Error in SSIS Package in SQL Server 2008 R2

Dear All,
I am getting below error in SSIS Package.
[OLE DB Destination [31]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "The statement has been terminated.".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >,
>= or when the subquery is used as an expression.".
The SSIS package reads .xml file from a folder and then mapped to insert values in SQL table from there one trigger writtern on table to update other tables.
Pld guide me cause of the issue
-- Kind Regards Sandeep

Dear All,
I am getting below error in SSIS Package.
[OLE DB Destination [31]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "The statement has been terminated.".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when
the subquery is used as an expression.".
The SSIS package reads .xml file from a folder and then mapped to insert values in SQL table from there one trigger writtern on table to update other tables.
Pld guide me cause of the issue
-- Kind Regards Sandeep
Query should return only one value. Instead it is returning more than one value. Check the query result in ssms.
Thanks.
- please mark correct answers

Raise Error from SSIS pkg

Can I raise an error form SSIS package component execute sql task and have the control re-direct to some other say mailing component and to send an email on certain condition
e.g.
I have a below code in expression of Execute SQL Task which on status<>0 sets the variable @exit_pkg = 'True' and RaiseError as below and control is passed to a alternate component defined with precedence logic as on
FAILURE and @exit_pkg = 'True'
IF @STATUS = 0
BEGIN
SELECT 'FALSE' AS Exit_Pkg
UPDATE [Config1] SET [IN_USE] = 1
END
ELSE
BEGIN
SELECT 'TRUE' AS Exit_Pkg
--RAISERROR (15600,-1,-1,N' attempt was made to run the pkg in use');
END
Neil

I am setting the values of the variables using below code with Result Set mapping in execute sql task
SELECT 'FALSE' AS Exit_Pkg SELECT 'TRUE' AS Exit_Pkg
Neil

ADO Error: an insufficient number of arguments....

Im currently using Access 2000 which is connected to a SQL database. I have a query (Or View) that runs every month. The problem i had was i had to manually make some changes every month to get to the data i needed so i changed this View into a Function with a parameter so i can input the detail(s) i need and it will run correctly - this works so far but the original View was also used within other queries that were created. Now the problem i have now is some of the other views that are now connected with the newly created Function comes up with the error:
ADO error: an insufficient number of arguments were supplied for the procedure or function Name_Of_Function.
I called the newly created function the exact name as the original view to ensure i had no problems. Any idea of whats happening here and how to resolve?
Thanks

Heres the function i have:
Code BlockSELECT     TOP 100 PERCENT dbo.[Totals].User, dbo.[Totals].[Account Name], dbo.[Totals].Company, dbo.[Totals].Name,
                      dbo.[User].Amount AS [Month Amount], dbo.[User].Profit AS [Month Profit], SUM(dbo.[Totals].[Y Amount]) AS [Y Amount],
                      SUM(dbo.[Totals].[Y Profit]) AS [Y Profit], dbo.[User].Month
FROM         dbo.[User] RIGHT OUTER JOIN
                      dbo.[Totals] ON dbo.[User].[Account Name] = dbo.[Totals].[Account Name] AND
                      dbo.[User].User = dbo.[Totals].User
GROUP BY dbo.[Totals].User, dbo.[Totals].[Account Name], dbo.[Totals].Company, dbo.[Totals].Name,
                      dbo.[User].Amount, dbo.[User].Profit, dbo.[User].Month
HAVING      (NOT (dbo.[Totals].User = N'Temp')) AND (dbo.[User].Month = @Month)
ORDER BY dbo.[Totals].User, dbo.[Totals].Company
Where it states Month = @Month is where the problem is i think. This Function runs fine as i want it to. But when im in another view that uses this function it get the above error. The only way i dont get the error is when i type in the month then all runs fine - but i would prefer it to ask me what month i need the data for????
Thanks

ADO Error%3A 0x80004005

I am in process of converting code writen in Labview 8.2 to Labview2013, and also changing from Windows XP to Windows 7. I've been able to successfully compile & rebuild the code, but now am getting error message when running the executable. Any ideas of how to resolve these?
Here are the error messages I get:
NI_Database_API.lvlibB Tools Open Connec
(String).vi->NI_Database_API.lvlibB Tools Open Connec
(Path).vi->Titan_DBConnect.vi->TMS_frontend_Titan.vi<ERR>ADO Error:
0x80004005
Exception occured in Microsoft OLE DB Provider for ODBC
Drivers: General error: Invalid file dsn '' in NI_Database_API.lvlibB Tools
Open Connec (String).vi->NI_Database_API.lvlibB Tools Open Connec
(Path).vi->Titan_DBConnect.vi->TMS_frontend_Titan.vi-2147467259 -
There is a "Titan DBConnect.vi" VI that points to a "Database.dsn" file.
Here is what is in the Database.dsn file: (This file is created by Windows, and is the same for XP & 7.)
[ODBC]
DRIVER=Driver do Microsoft Access
(*.mdb)
UID=admin
UserCommitSync=Yes
Threads=3
SafeTransactions=0
PageTimeout=5
MaxScanRows=8
MaxBufferSize=2048
FIL=MS
Access
DriverId=25
DefaultDir=C:\Test Config
DBQ=C:\Test
Config\Database.mdb
Thanks!

The document you linked above definitely could be useful in resolving your issue. Your original error mentioned a .dsn file, and your second post mentioned a .udl file. LabVIEW communicates with the database through either the ODBC standard (uses a DSN) or the OLE DB standard (uses a UDL file). Which standard are you actually trying to use? Either way, make sure all the the settings you're using are consistent whichever standard you're trying to use.
http://digital.ni.com/public.nsf/allkb/1D5EB4DCBD13106486256B9D005E11B0 (the one you linked above) gives a good description of how to use the OLE DB standard to communicate with a database.
I'm also a little unclear whether you were able to test the steps outlined in the first document linked above (http://digital.ni.com/public.nsf/allkb/E7984C0DA0F0E65086257694005B4CB7). Let me know if that process was successful or if you ran into any problems trying to follow those steps.
You also asked a question about .mdb files. It may be possible that copying the file from XP to Windows 7 could have caused your problem. You can create a new .mdb file through LabVIEW by following the instructions detailed in this document:http://digital.ni.com/public.nsf/allkb/95EE6A951D01CE0A8625733F00098371?OpenDocument
Finally, when executing the above instructions that you quoted, make sure that the file path is correct and that you are pointing to a .udl file. I was unable to duplicate the problem you were experiencing with those steps on my machine.
Let us know if you make in progress with these suggestions.
Ryan K.

ADO Error Code :0x800a0cb3

I am working with Crystal Reports 2008 SP3 using LCPI.ibprovider.3 trial version in OLE-DB(ADO) Database Type
Name of my Database file is Primerose.FDB
When I tried Connecting to it it gives me ADO Error Code :0x800a0cb3
It works fine when I am using LCPI.ibprovider.2 with the same Database file
There is no space or dot in the name of Database

Hello,
You should talk to the makers of that driver and ask them what the error code means. They can download a trial version if they need to test it.
CR dynamically queries the driver to populate the various lists, there is an Add Property button if their driver needs something special. Try creating a UDL file, open NotePad and then save it to your desktop and then rename the extension to *.udl then double click it and the OLE DB connection Wizard will pop up. Set all of the log on properties there and test it. then use it in CR to see if that helps.
Thanks
Don

ADO Error: 0x80040E14

Hi,
I want to interface LabVIEW2010 and Microsoft Access 2003 by using UDL technique. I am using Microsoft Jet 4.0 OLE DB Provider for this interface. When I Run the sample program, its showing an error Error -2147217900 as follows:
(occurred at NI_Database_API.lvlib:Conn Execute.vi->NI_Database_API.lvlibB Tools Create Table.vi->NI_Database_API.lvlibB Tools Create Table If Not Exist.vi->NI_Database_API.lvlibB Tools Insert Data.vi->Untitled 1.vi)
Possible reason(s):
ADO Error: 0x80040E14
Exception occured in Microsoft JET Database Engine: Syntax error in field definition. in NI_Database_API.lvlib:Conn Execute.vi->NI_Database_API.lvlibB Tools Create Table.vi->NI_Database_API.lvlibB Tools Create Table If Not Exist.vi->NI_Database_API.lvlibB Tools Insert Data.vi->Untitled 1.vi
This error is not consistent, I mean it occurs most of the times, but few times it just disappears :-) I have searched a lot on the NI site but not getting any solution. Please help me to solve this error.
Note: I have attached my sample VI named 'Untitled 1' .
Attachments:
Untitled 1.vi ‏14 KB

The problem is most likely in the naming of your table or field names.
You may be using a reserved word or need to use a delimiter to handle table or field names containing a space.
http://www.adopenstatic.com/faq/80040e14.asp
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

Converting Oracle TIMESTAMP(4) column to SQL datetime column conversion error in ssis

I could not able to convert Oracle TIMESTAMP(4) column to SQL datetime column conversion error in ssis.
I'm connecting OLEDD Oracle Source to OLEDB SQL Destination in SSIS package. I'm trying to insert data from oracle datetime column into sql datetime column. I'm getting some errors.
Please provide helpful info.

You can transform the data types directly at the source by writing a proper SQL statement, or you can convert them using the data conversion component.
Please refer the below link
http://stackoverflow.com/questions/6256168/how-to-convert-a-timestamp-in-string-format-to-datetime-data-type-within-a-packa

ADO Error: 0x00000001 Argument error. One of the column names specified is blank.

I am writing a database program and have come across this error -
ADO Error: 0x00000001
Argument error. One of the column names specified is blank.
I have tried everything I can think of and have no idea what to try next.
The VI that the error is occuring in (attached written in LV 2011) allows the user to enter in the details of a new user. It then looks up this user to get the ID (primary key) of the user which will be used in another step of the program. The VI writes to the database fine but then comes back with the above error when using the SELECT query. All columns in the database have data in them. Also when i use a differnt VI that just looks up the user/customer it works fine.
I have tried deleting all the code and copying the code from the simpler (look up only) VI but I still get the same error.
I created an indicator for the concatenated text to make sure the query was right and it appears to be fine. So now I am stumped. Any help would be greatly appreciated.
Thanks
Attachments:
AddNewMeasurer.vi ‏40 KB

tripped wrote:
I am writing a database program and have come across this error -
ADO Error: 0x00000001
Argument error. One of the column names specified is blank.
I have tried everything I can think of and have no idea what to try next.
The VI that the error is occuring in (attached written in LV 2011) allows the user to enter in the details of a new user. It then looks up this user to get the ID (primary key) of the user which will be used in another step of the program. The VI writes to the database fine but then comes back with the above error when using the SELECT query. All columns in the database have data in them. Also when i use a differnt VI that just looks up the user/customer it works fine.
I have tried deleting all the code and copying the code from the simpler (look up only) VI but I still get the same error.
I created an indicator for the concatenated text to make sure the query was right and it appears to be fine. So now I am stumped. Any help would be greatly appreciated.
Thanks
The query "appears" fine. Well, obviously it isnt' fine. The database is telling you that.
What is the SELECT query you are sending?

Error in SSIS Script Component

Development environment : SQL Server Business Intelligence Development Studio 2008
I have developed SSIS package to insert/update records to production Database. In this case I'm using a Script component to call a Stored Procedure to do the data access. I putted a User defined variable into
ReadOnlyVariables container. When execute the package I got the following error.
ERROR:
Unable to cast COM object of type 'System.__ComObject' to interface type 'Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSVariables100'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{22992C1D-393D-48FB-9A9F-4E4C62441CCA}'
failed due to the following error: The application called an interface that was marshalled for a different thread. (Exception from HRESULT: 0x8001010E (RPC_E_WRONG_THREAD)).
at Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSVariables100.Unlock()
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponent.UnlockReadOnlyVariables()
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.PostExecute()
Appreciate if any assistance regarding this!
Kind Regards,

What is your readonly variable meant to store: a value to be supplied as argument to the stored procedure?
Either way, I agree with SSISJoost, try to use Execute Sql Task, I prefer to make as much as possible use of the SSIS components.
Maybe the reason why you write a script is that you assume one cannot call an EXEC stored procedure immediately in a data source in a data flow component. But you can prepare the Exec statment in a string variable and then use that string variabl in
a Oled db source with SQL command as variable.
Jan D'Hondt - SQL server BI development

Error executing SSIS packages from Agent

Hi All,
     I designed SSIS package that loads data from Oracle table to SQl server table along with loading data into Diension and fact tables using SSIS packages only. First I created all SSIS packages that loads data into Staging tables from
Oracle table in next level loading data into Dimension table and final level is loading data into Fact table. At lasts I created One master package there I'm calling all packages (Execute package task) differently.
Configuration type: Parent package configuration for All child packages. XML config for parent package.
When I execute SSIS package from BIDS data is loading up to Fact table. When I execute SSIS packages through Sql server agent ( Using File System Deployment)When I execute SSIS package from Sql server agent it is throwing an error message like
Message
Executed as user: . Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved.    Started: 10:45:10 PM Error: 2013-10-17 22:45:12.60
Code: 0xC00220E6     Source: Master Data      Description: There is no project to reference. End Error Error: 2013-10-17 22:45:12.61     Code: 0xC0024107     Source:
Master Data      Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:45:10 PM Finished: 10:45:13 PM Elapsed:
2.59 seconds. The package execution failed. The step failed.
I'm uploaded config file also while at the time of scheduling job.
Regards,
Praveen
Regards, Praveen

Hi Praveen,
The issue may occur if the SQL Server Agent Service Account or Proxy account doesn’t have sufficient permissions. Please create a SQL Server Agent Proxy account that has the permissions to execute the package and perform update operations on the SQL Server
fact tables.
Reference:
http://technet.microsoft.com/en-us/library/ms175834.aspx
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error with SSIS package running as SQL Agent job

I have a strange issue.
I have a SQL Agent job that execute 5 steps, each step is an SSIS package that imports a CSV file to a temp table, then executes a SQL script to update a production table.
This job runs every 3 mins, every day, and has been for over a year.
Every once in a while it will start failing on step 2. Sometime it only happens for a couple of runs, other times I have to restart the SQL server. Once it corrects itself, it could be months before it happens again, but usually happens every
few weeks.
The error in the job history is: "Unable to bulk copy data. You may need to run this package as an administrator"
Obviously I have all the permissions correct, as it was running successfully every 3 mins before this error suddenly starts. I'm at a loss as to what the problem is. It is always on step 2, which is identical to step 1 except its a different CSV file
going to a different table. As I typed this, it failed twice, then was successful afterwards.
Any ideas where to look for further information? I've checked the event viewer and looked in the SQL logs, nothing stands out at this time.

Hi Kerberos35,
It seems to be caused by the UAC feature which makes SSIS use the low-permissions token of the administrator Windows account under which the job runs. This issue is described in the following KB article:
http://support.microsoft.com/kb/2216489/en-us
To resolve the issue, you can install the latest service pack for your SQL Server. To work around this issue, you can also use one of the following two methods:
Method 1: Replace the SQL Server Destination components in the Data Flow Tasks that are failing with OLE DB Destination components that point to the same SQL Server connection manager.
Method 2: Create a SQL Server Agent proxy by using a Windows account that is not a member of the local Administrators group after you assign Create Global Objects permissions to that account.
To do this, follow these steps:
Click Start, point to Administrative Tools, and then click Local Security Policy.
Expand Local Policies, and then click User Rights Assignment.
In the details pane, double-click Create global objects.
In the Local Security Policy Setting dialog box, click Add.
In the Select Users or Group dialog box, click the user accounts that you want to add, click Add, and then click OK two times.
Regards,
Mike Yin
TechNet Community Support

Error running SSIS package to do with encrypting/decrypting password. Help needed.

Getting this error. Can anyone shed some light? This is the first promote since 2009. Protection level of the package is 'EncryptSensitiveWithPassword' I'm new at SSIS so don't assume I know anything.
10/30/2014 16:11:06,HPAddress_Export,Error,0,SSQLTST01\SSQLTST02,HPAddress_Export,(Job outcome),,The job failed.
The Job was invoked by User AHCCCS\Administrator. The last step to run was step 1 (Step 1).,00:00:02,0,0,,,,0
10/30/2014 16:11:06,HPAddress_Export,Error,1,SSQLTST01\SSQLTST02,HPAddress_Export,Step 1,,Executed as user: AHCCCS\svcssqltst01. ....00.5324.00 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 4:11:06 PM Error: 2014-10-30 16:11:07.05
Code: 0xC001405F     Source:
Description: Failed to decrypt an encrypted XML node because the password was not specified or not correct. Package load will attempt to continue without the encrypted information.
End Error Error: 2014-10-30 16:11:07.37
Code: 0xC001405F     Source:
Description: Failed to decrypt an encrypted XML node because the password was not specified or not correct. Package load will attempt to continue without the encrypted information.
End Error Error: 2014-10-30 16:11:07.79
Code: 0xC0202009     Source: HPAddress_ExportPackage Connection manager "SQL.HealthPlanAddressChanges.hpac"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D.
An OLE DB record is available. Source: "Micros...
The package execution fa... The step failed.,00:00:02,0,0,,,,0

Hi,
From the error message “Failed to decrypt an encrypted XML node because the password was not specified or not correct. Package load will attempt to continue without the encrypted information.“, it seems that the error is caused by the password to decrypt
an encrypted XML node was not specified or incorrect.
Besides, the EncryptSensitiveWithPassword Protection level means user should use a password to encrypt only the values of sensitive properties in the package. To open the package in SSIS Designer, the user must provide the package password. If the password
is not provided, the package opens without the sensitive data and the current user must provide new values for sensitive data. If the user tries to execute the package without providing the password, package execution fails.
So in order to resolve this issue, we should provide the password when executing the package. When you execute a package with this setting using DTEXEC, you can specify the password on the command line using the /Decrypt password command line argument.
Reference:
Access Control for Sensitive Data in Packages
Securing Your SSIS Packages Using Package Protection Level
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Web Service Error in SSIS

Dear All,
I have a web service, which is used to convert one currency type to another currency. With help of web service task calling that web service in SSIS package.
After configuration I tested connection and downloaded WSDL file
General Tab. Configured Input and Output Tab in Web Service Task.
When we execute SSIS package it is throwing an error like below. I try to configure with Proxy and with out proxy in both the cases it is throwing same error.
Error Description :
[Web Service Task] Error: An error occurred with the following error message: "Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebserviceTaskException: Could not execute the Web method. The error is: Object reference not set to an instance of an
object..
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebMethodInvokerProxy.InvokeMethod(DTSWebMethodInfo methodInfo, String serviceName, Object connection)
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTaskUtil.Invoke(DTSWebMethodInfo methodInfo, String serviceName, Object connection, VariableDispenser taskVariableDispenser)
at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTask.executeThread()".
Can Some one help on this issue.
Regards,
Praveen C
Regards, Praveen

Hello,
When you say you have configured the proxy, are you talking about the proxy tab on the HTTP Connection Manager? Please
confirm you have configured it properly.
http://msdn.microsoft.com/en-us/library/ms189707.aspx
What is the name of the web service?
Can you try to do the same on a script task as mentioned in the following post?
http://blogs.msdn.com/b/farukcelik/archive/2009/07/17/ssis-consuming-a-web-service-without-using-web-service-task-and-http-connection-manager-within-script-task.aspx?Redirected=true
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Error executing SSIS remotely

I have a package that created and stored on SQL01.SSISDB catalog. The package has SQL Job Transfer task, which will connect to SQL02 and transfer jobs to SQL03. It works fine if i run this package from SQL01. As soon as I create a job on SQL02
to run this package (from SQL01), i get following error.
The validate method on the task failed, and return error code 0X80131501 (Failed to connect to server SQL01) The validate method must succeed and indicate the result using an "Out" parameter.
The job is running under agent service which is local admin on all servers. SPN is registered for all servers as well.
Notice another thing: If i go on SQL02 box and connect to SQL01 via SSMS and validate package, i get the same error.
Can someone help here?

Hi Jaimin1125,
Based on my research, the error always related to the Protection level property. Could you please tell us what’s the value of the property for your package?
Please set the SSIS Package ProtectionLevel property to EncryptSensitiveWithPassword to see if it works. Change
Package Proprties Window >ProtectionLevel -- Change that to EncryptSensitiveWithPassword PackagePassword -- enter password-> somepassword
If possible, we can also set the SSIS Package ProtectionLevel property to
DontSaveSensitive to test again.
The following similar threads are for your references:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/6e88ef9b-b4f1-43c6-bbf1-379a0c08f1a4/the-validate-method-on-the-task-failed-and-returned-error-code-0x80131501-when-execute-through?forum=sqlintegrationservices
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/53e41e6f-dbd2-43d8-9ef5-36825e451f58/transfer-table-using-sql-server-authentication?forum=sqlintegrationservices
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

ADO Error in SSIS

Similar Messages

Maybe you are looking for