Adobe Presenter - AICC No Completion in Saba

I am currently testing integration with Adobe Presenter courses using the Saba LMS and AICC import.  The training content is on a different domain than LMS so I have used the frameset and crossdomain.xml workarounds suggested in another Adobe forum post.  Everything is fairly successful, however, even when I have completed the content according to the completion rules set in Adobe and the content module (lesson) shows as complete on My Enrollments, the course is still showing as Not Evaluated in general and is not moved from My Enrollments to My Transcripts.  I tried with Captivate and it is updating the content module (lesson) complete in Saba and also marking the course as complete and moving to My Transcripts.
Why is Presenter not working the same way?  Any advice is appreciated.  Thanks! 

First, the best place is probably the Presenter forum, which somewhat curiously is under the Connect umbrella:
http://forums.adobe.com/community/connectpro/connectpro_presenter
Out of curiousity, why are you using AICC? Because the content is on a different domain?
To the point, it's great to have a logging or debugging tool for these sort of things to view the communication between the LMS and the lesson. Perhaps the lesson is sending the 'completed' status but also sending some other value that the LMS is using to change the status back to incomplete?
My first suggestion would be to try the lesson in a tool like TestTrack...but I don't think that handles AICC. Does the Saba LMS have any kind of debugger or logging tool you can use? You really need to see if the lesson is sending the status back to the LMS as you suspect it should. If it IS, then the issue lies with the LMS and how it's interpreting that result. If it's NOT, then you can then perhaps figure out what to adjust in the lesson.
In general, just play with the settings. If it's set to Complete/Incomplete and has a Mastery Score, try NOT setting the Mastery Score... And other such combinations.
I hope the folks in the Connect/Presenter forum can provide more insight.
Erik

Similar Messages

  • Adobe Presenter Always Passes Complete Status to LMS - Even When Quiz Failed

    Issue:
    I'm trying to publish an Adobe Presenter 7 course with a quiz using SCORM 1.2. I am publishing to our LMS (Cornerstone OnDemand). The course loads and plays fine. However it always reports a complete status to the LMS - even when I fail the quiz. I can even see the score (10 out of 50 points), but the status still shows as completed when it should be incomplete. The pass threshhold is set to 50 points...and yet any scoring allows a completed status.
    Questions:
    1. Has anyone used Presenter with CSOD?
    2. Has anyone used Presenter with any SaaS LMS?
    3. Which settings are required to acurately reports a status?
    Thanks,
    Dan

    On top of Ravi's suggestion, what I would also recommend is checking the "scorm_support.js" file which can be found in your Scorm Support folder---this is automatically created when you publish your PPT deck.
    Open the scorm_support.js file using Notepad, Notepad++....anything other than Word.  From there, look at the top of the js file and you'll see a few variables which help to establish the SCORM setting of the training, but the one to look for looks like this:
    var g_nAPI = 1;
    if that variable is set to "0", then your published content will trigger SCORM 2004, not 1.2.
    I've seen this come up on a few occasions, but ever since upgrading my version of Presenter to 7.0.5, this has gone away.
    Additionally, there are a few other things you can do which might help in terms of deploying content in your LMS:
    1. I would strongly recommend downloading the ADL SCORM 1.2.7 test suite.  What this basically does is allow you to test the conformity of the SCORM package of a published Presenter course to determine if problems exist BEFORE you post your files to an LMS.  You can download the test suite here:
    http://www.adlnet.gov/adlnews/Documents/News%20Archive/TheSCORMConformanceTestSuiteVersion 127SelfTestisAvailableforDownload.aspx
    2. If you have an LMS admin at your disposal, be sure to check with that person for deployment criteria when your content is installed on the LMS.  If YOU are that person, then you have some homework to do--because you're going to need to know how to run installation procedures and content checks on your training as recommended by the LMS software.
    I've developed and deployed Presenter content on a variety of LMSs, and some have nastier quirks than others...so one solution may not fit every environment, but you have to keep checking!  I would also try reaching out to your LMS's tech support if possible.
    Rob
    http://www.robrode.com/yabb/

  • Adobe Presenter Course not Marking Complete in LMS

    We have a course built with Adobe Presenter and was loaded into our LMS (sumtotal 7.5).  After completing the course, it is not marking completions.
    Here is what the settings are set for the course in Adobe Presenter:
    - enable reporting (checked) for SCORM
    - Incomplete--> Complete
    - success/completion criteria = user access
    - data to report = quiz score = points
    Any suggestions?

    Hopefully your SumTotal folks may have an answer...likely this has come up before?
    If not, better to ask in the Presenter forum (curiously hidden way in the Connect forum):
    http://forums.adobe.com/community/adobeconnect/connectpro_presenter
    Or check out this article - it's old, but maybe still helpful?
    http://www.connectusers.com/forums/viewtopic.php?id=1891

  • Requesting documentation or tool(s) to create a completely silent installation of Adobe Presenter 9

    I have several computers I need to install Adobe Presentor on, is their a way to install Presentor 9 silently. Let me be perfectly clear, NO USER INTERACTION, NO SCREENS, NO LOGINS. I have ran into to many companies that do not understand the true concept of SILENT INSTALLS.
    Thank you,
    Ralph A. Flickinger
    ITS Special Project Manager
    IMSA

    Hi,
    Greetings from Adobe.
    Yes you can perform silent installtion of Adobe Presenter 9 using CCP(Creative Cloud Packager). CCP will be available in your LWS website(www.licensing.adobe.com) . Download CCP from LWS website and create a package for Presenter 9.
    Note: Make sure that the If you are using 64 bit OS then you have to create 64 bit package and if you are using 32 bit OS then you may need to create 32 bit package. Also this process is only applicable for 32 bit Powerpoint.
    Please refer to the below link for more information of CCP:
    http://helpx.adobe.com/creative-cloud/packager/creating-packages.html
    After creating the package:
    Steps to follow to deploy silently on single machine:
    1. Open CMD in Administrator mode.
    2. Give the path till inside the build folder of the package. For Example if the build is saved on your Desktop the path in CMD should be as below:
                         C:\Users\[username]\Desktop\Packagefolder\packagename\Build>
    3. Now type the following installation command:  msiexec.exe  /i  packagename.msi  /quiet            
    4. Launch Task Manager.
    5.There will be three process of “msiexec.exe”
    a)   6.One will be under System
    b)   7.Other Two will be under [username].
    8.Installation will be completed once both the process of msiexec.exe under the [username] are finished.
    9.The installation process with take 5 to 10 minutes
    Regards,
    Mayank

  • Actionscript / swf integration with Adobe Presenter

    I need to do some Actionscript / swf integration with Adobe Presenter content.
    Is there any way to access information about current slide nr., total number of slides and "end of presentation" information from swf(Actionscript 3.0) inserted into Adobe Presenter?
    I am using Adobe Presenter 8 with Adobe Connect 8.

    First, the best place is probably the Presenter forum, which somewhat curiously is under the Connect umbrella:
    http://forums.adobe.com/community/connectpro/connectpro_presenter
    Out of curiousity, why are you using AICC? Because the content is on a different domain?
    To the point, it's great to have a logging or debugging tool for these sort of things to view the communication between the LMS and the lesson. Perhaps the lesson is sending the 'completed' status but also sending some other value that the LMS is using to change the status back to incomplete?
    My first suggestion would be to try the lesson in a tool like TestTrack...but I don't think that handles AICC. Does the Saba LMS have any kind of debugger or logging tool you can use? You really need to see if the lesson is sending the status back to the LMS as you suspect it should. If it IS, then the issue lies with the LMS and how it's interpreting that result. If it's NOT, then you can then perhaps figure out what to adjust in the lesson.
    In general, just play with the settings. If it's set to Complete/Incomplete and has a Mastery Score, try NOT setting the Mastery Score... And other such combinations.
    I hope the folks in the Connect/Presenter forum can provide more insight.
    Erik

  • How do I install Adobe Presenter 9 on Windows 8.1 running MS Office 2013 (32 bt)?

    How can I install a trial version of Adobe Pesenter 9 running Windows 8.1 and also running MS Office 2013? I am sure it is 32 bit, so that is not the issue. I can see it in the add-ins in Power Point, but when I check it to run, it will not do anything. I have restarted my computer, unistalled and reinstalled Adobe Presenter a few times, and still, it will not work. It was working at one time, but now it will not work for the life of me. I have completed a presentation I would like to showcase in my portfolio. Please help me with this problem. Thank You!!

    Thanks for your quick response, Could you paste the screenshot of an error, so that I can help you accordingly or you may send me an email at [email protected] with the subject line of this concern. We may need to troubleshoot the concern, according to the error message.
    Thanks & Regards,
    Puspendra Yadav
    Adobe Support.

  • I have to install only Adobe presenter from this whole application. I created package using AAMEE3.1

    I created package using AAMEE 3.1, using source of Adobe E-learning Suite 6.1 .
    During Package creation i selcted only Adobe Presenter 8. Package is serialized and also Adobe ID is there to login. Package created sucessfully. But when i run MSI it rollbacks during Installation.
    Below is the PDApp.log file:
    7/15/2013 09:07:21 [INFO] DeploymentManager - Build Version - 3.1.105.0
    7/15/2013 09:07:21 [INFO] DeploymentManager - Logging Level verbosity Set  to 4
    7/15/2013 09:07:21 [INFO] DeploymentManager - Executing the deferred custom action.
    7/15/2013 09:07:21 [INFO] DeploymentManager - Obtained the following as CustomActionData
    7/15/2013 09:07:21 [INFO] DeploymentManager - mode=install;sourceDir=C:\New folder (2)\Adobe Presenter 8\Build\;installDir=;origDB=C:\New folder (2)\Adobe Presenter 8\Build\Adobe Presenter 8.msi
    7/15/2013 09:07:21 [INFO] DeploymentManager - mode=install;sourceDir=C:\New folder (2)\Adobe Presenter 8\Build\;installDir=;origDB=C:\New folder (2)\Adobe Presenter 8\Build\Adobe Presenter 8.msi
    7/15/2013 09:07:21 [INFO] DeploymentManager - Original database path is : C:\New folder (2)\Adobe Presenter 8\Build\Adobe Presenter 8.msi
    7/15/2013 09:07:21 [INFO] DeploymentManager - OptionXML saved at location :: D:\Users\Vmbuild\AppData\Local\Temp\{0EAD2103-39AF-4D85-B942-CAC0E462C482}\\{9CB14C72-1E7 1-49C0-A7D8-559F1DC35661}
    7/15/2013 09:07:21 [INFO] DeploymentManager - Build Version - 3.1.105.0
    7/15/2013 09:07:21 [INFO] DeploymentManager - Logging Level verbosity Set  to 4
    7/15/2013 09:07:21 [INFO] DeploymentManager - Initializing Custom Action Data from parameters
    7/15/2013 09:07:21 [INFO] Utilities - Folder does not exist
    7/15/2013 09:07:21 [INFO] DeploymentManager - Provisioning Tool path is (D:\Users\Vmbuild\AppData\Local\Temp\{0EAD2103-39AF-4D85-B942-CAC0E462C482}\\{731F139B-D8 D6-4870-AA90-9626C4D6D4E2}).
    7/15/2013 09:07:21 [INFO] DeploymentManager - Starting to run the custom action for install mode
    7/15/2013 09:07:21 [INFO] DeploymentManager - STEP 1: Starting to parse Option XML.
    7/15/2013 09:07:21 [INFO] DeploymentManager - Deployment XML created at path :: D:\Users\Vmbuild\AppData\Local\Temp\{2592DDC9-72BD-430A-B2EA-C2839B69B46E}\\{709B4BF9-4A0 5-4D3E-BC48-850DE16D5A85}
    7/15/2013 09:07:21 [INFO] DeploymentManager - Deployment Manager is running in Install Mode.
    7/15/2013 09:07:21 [INFO] DeploymentManager - Self-Update BootStrapper Relative Path doesn't exist.
    7/15/2013 09:07:21 [INFO] DeploymentManager - Override XML created at path :: D:\Users\Vmbuild\AppData\Local\Temp\{2592DDC9-72BD-430A-B2EA-C2839B69B46E}\\{61E5FBB2-8F4 C-4909-9A3F-823EC1DE99F5}
    7/15/2013 09:07:21 [INFO] DeploymentManager - No of updates found (0).
    7/15/2013 09:07:21 [INFO] DeploymentManager - STEP 2: Starting to launch media Bootstrapper.
    7/15/2013 09:07:21 [INFO] DeploymentManager - Bootstrapper launch location is :: C:\New folder (2)\Adobe Presenter 8\Build\Setup\Set-up.dat
    7/15/2013 09:07:22 [INFO] Setup - Build Version - 6.2.136.0
    7/15/2013 09:07:22 [INFO] Setup - Logging Level verbosity Set  to 4
    7/15/2013 09:07:22 [INFO] Setup - Start Adobe Setup
    7/15/2013 09:07:22 [INFO] Setup - TimeLog: Bootstrapper Start
    7/15/2013 09:07:22 [INFO] Setup - TimeLog: Start initial checks
    7/15/2013 09:07:22 [INFO] Setup - Action specified - "install"
    7/15/2013 09:07:22 [ERROR] Setup - Error parsing command line arguments at - "DISABLE_CCM_DESKTOPSHORTCUT".
    Expected arguments are -
        --mode=silent
        --overrideFile="<FilePath>"
    7/15/2013 09:07:22 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\Setup\resources\setup.xml
    7/15/2013 09:07:22 [INFO] PIM - XML is valid
    7/15/2013 09:07:22 [WARN] PIM - Failed to find Node
    7/15/2013 09:07:22 [INFO] Setup - Found 7 packages in setup manifest
    7/15/2013 09:07:23 [INFO] Utilities - Semaphore is not locked
    7/15/2013 09:07:23 [INFO] PIM - Build Version - 6.2.136.0
    7/15/2013 09:07:23 [INFO] PIM - Logging Level verbosity Set  to 4
    7/15/2013 09:07:23 [INFO] Utilities - File does not exist
    7/15/2013 09:07:23 [INFO] Utilities - File does not exist
    7/15/2013 09:07:23 [INFO] PIM - Build Version - 6.2.136.0
    7/15/2013 09:07:23 [INFO] PIM - Logging Level verbosity Set  to 4
    7/15/2013 09:07:23 [INFO] PIM - CREATE PIM Instance ...
    7/15/2013 09:07:23 [INFO] Utilities - File does not exist
    7/15/2013 09:07:23 [INFO] PIM - trying to createOrUpdatePIMDbSchema.
    7/15/2013 09:07:23 [INFO] PIM - Current db schema version on machine 1.
    7/15/2013 09:07:23 [INFO] PIM - Current db schema version to install 1.
    7/15/2013 09:07:23 [INFO] PIM - PIM DB Schema is up to date. Current schema version is 1.
    7/15/2013 09:07:23 [INFO] PIM - PIM Database is Up To Date.
    7/15/2013 09:07:23 [INFO] PIM - Updater Inventory location:C:\New folder (2)\Adobe Presenter 8\Build\Setup\resources\updaterinventory.dll
    7/15/2013 09:07:23 [INFO] PIM - Acquired System level ACF lock ...
    7/15/2013 09:07:23 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\core\PDApp.pimx
    7/15/2013 09:07:23 [INFO] PIM - XML is valid
    7/15/2013 09:07:23 [WARN] PIM - Failed to find Node
    7/15/2013 09:07:23 [INFO] PIM - Package id 5AA1D762-31AF-4FC3-A0C0-66BF663B2117 is already installed
    7/15/2013 09:07:24 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\D6\D6.pimx
    7/15/2013 09:07:24 [INFO] PIM - XML is valid
    7/15/2013 09:07:24 [WARN] PIM - Failed to find Node
    7/15/2013 09:07:24 [INFO] PIM - Package id 54FD72DC-72EC-4CDC-8828-F07C4E9E6FA2 is already installed
    7/15/2013 09:07:24 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\DECore\DECore.pimx
    7/15/2013 09:07:24 [INFO] PIM - XML is valid
    7/15/2013 09:07:24 [WARN] PIM - Failed to find Node
    7/15/2013 09:07:24 [INFO] PIM - Package id 6D2A548B-C50D-46BA-B83E-C8199C6A9406 is already installed
    7/15/2013 09:07:24 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\DWA\DWA.pimx
    7/15/2013 09:07:24 [INFO] PIM - XML is valid
    7/15/2013 09:07:24 [WARN] PIM - Failed to find Node
    7/15/2013 09:07:24 [INFO] PIM - Package id 99477136-88AD-496B-9551-BAE72699A32C is already installed
    7/15/2013 09:07:25 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\P6\P6.pimx
    7/15/2013 09:07:25 [INFO] PIM - XML is valid
    7/15/2013 09:07:25 [WARN] PIM - Failed to find Node
    7/15/2013 09:07:25 [INFO] PIM - Package id FAFC744B-DDFB-4097-A41D-7E9539FEBAF9 is already installed
    7/15/2013 09:07:27 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\LWA\LWA.pimx
    7/15/2013 09:07:27 [INFO] PIM - XML is valid
    7/15/2013 09:07:27 [WARN] PIM - Failed to find Node
    7/15/2013 09:07:27 [INFO] PIM - Package id B322281B-C04F-438E-82D7-7DA34A359526 is already installed
    7/15/2013 09:07:28 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\UWA\UWA.pimx
    7/15/2013 09:07:29 [INFO] PIM - XML is valid
    7/15/2013 09:07:29 [WARN] PIM - Failed to find Node
    7/15/2013 09:07:29 [INFO] PIM - Package id B1313DE3-08DF-4834-91D9-CBD1A91488E5 is already installed
    7/15/2013 09:07:29 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\CCM\CCM.pimx
    7/15/2013 09:07:29 [INFO] PIM - XML is valid
    7/15/2013 09:07:29 [WARN] PIM - Failed to find Node
    7/15/2013 09:07:29 [INFO] PIM - Package id F0158AAB-0779-4B40-A07D-3F2A21D47E74 is already installed
    7/15/2013 09:07:29 [INFO] PIM - pim_haveEnoughDiskSpaceToInstallPackages reqSize ... 29928536
    7/15/2013 09:07:29 [INFO] Setup - TimeLog: End initial checks
    7/15/2013 09:07:29 [INFO] Setup - TimeLog: Begin Installing
    7/15/2013 09:07:29 [INFO] Setup - Start Installing core package - C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\core\PDApp.pimx
    7/15/2013 09:07:29 [INFO] PIM - START installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\core\PDApp.pimx
    7/15/2013 09:07:29 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\core\PDApp.pimx
    7/15/2013 09:07:29 [INFO] PIM - XML is valid
    7/15/2013 09:07:29 [WARN] PIM - Failed to find Node
    7/15/2013 09:07:29 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\core\PDApp.pimx'
    7/15/2013 09:07:29 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\core\PDApp.pima'
    7/15/2013 09:07:29 [INFO] PIM - Package id 5AA1D762-31AF-4FC3-A0C0-66BF663B2117 is already installed
    7/15/2013 09:07:29 [INFO] PIM - SUCCESS deleteAppletRegInfoRecords.
    7/15/2013 09:07:31 [INFO] PIM - SUCCESS deletePackageUpgradeInfoRecords.
    7/15/2013 09:07:31 [INFO] PIM - SUCCESS deletePackageInstallationInfoRecords.
    7/15/2013 09:07:32 [INFO] PIM - SUCCESS insertPackageUpdateList.
    7/15/2013 09:07:32 [WARN] PIM - Failed to find Node
    7/15/2013 09:07:32 [INFO] PIM - SUCCESS insertAppletRegInfoList.
    7/15/2013 09:07:32 [INFO] PIM - Backup Folder Created
    7/15/2013 09:07:34 [INFO] Utilities - File does not exist
    7/15/2013 09:07:37 [INFO] PIM - SUCCESS installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\core\PDApp.pimx.
    7/15/2013 09:07:38 [INFO] Setup - Finished Installing core package - C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\core\PDApp.pimx, Return status: 0
    7/15/2013 09:07:38 [INFO] Setup - Start Installing package - C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\D6\D6.pimx
    7/15/2013 09:07:38 [INFO] PIM - START installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\D6\D6.pimx
    7/15/2013 09:07:38 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\D6\D6.pimx
    7/15/2013 09:07:38 [INFO] PIM - XML is valid
    7/15/2013 09:07:38 [WARN] PIM - Failed to find Node
    7/15/2013 09:07:38 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\D6\D6.pimx'
    7/15/2013 09:07:38 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\D6\D6.pima'
    7/15/2013 09:07:38 [INFO] PIM - Package id 54FD72DC-72EC-4CDC-8828-F07C4E9E6FA2 is already installed
    7/15/2013 09:07:39 [INFO] PIM - SUCCESS deleteAppletRegInfoRecords.
    7/15/2013 09:07:39 [INFO] PIM - SUCCESS deletePackageUpgradeInfoRecords.
    7/15/2013 09:07:39 [INFO] PIM - SUCCESS deletePackageInstallationInfoRecords.
    7/15/2013 09:07:39 [INFO] PIM - SUCCESS insertPackageUpdateList.
    7/15/2013 09:07:39 [INFO] PIM - SUCCESS insertAppletRegInfoList.
    7/15/2013 09:07:39 [INFO] PIM - Backup Folder Created
    7/15/2013 09:07:39 [INFO] Utilities - File does not exist
    7/15/2013 09:07:42 [INFO] PIM - SUCCESS installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\D6\D6.pimx.
    7/15/2013 09:07:42 [INFO] Setup - Finished Installing package - C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\D6\D6.pimx
    7/15/2013 09:07:42 [INFO] Setup - Start Installing package - C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\DECore\DECore.pimx
    7/15/2013 09:07:42 [INFO] PIM - START installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\DECore\DECore.pimx
    7/15/2013 09:07:42 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\DECore\DECore.pimx
    7/15/2013 09:07:42 [INFO] PIM - XML is valid
    7/15/2013 09:07:42 [WARN] PIM - Failed to find Node
    7/15/2013 09:07:42 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\DECore\DECore.pimx'
    7/15/2013 09:07:42 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\DECore\DECore.pima'
    7/15/2013 09:07:42 [INFO] PIM - Package id 6D2A548B-C50D-46BA-B83E-C8199C6A9406 is already installed
    7/15/2013 09:07:42 [INFO] PIM - SUCCESS deleteAppletRegInfoRecords.
    7/15/2013 09:07:43 [INFO] PIM - SUCCESS deletePackageUpgradeInfoRecords.
    7/15/2013 09:07:43 [INFO] PIM - SUCCESS deletePackageInstallationInfoRecords.
    7/15/2013 09:07:43 [INFO] PIM - SUCCESS insertPackageUpdateList.
    7/15/2013 09:07:43 [WARN] PIM - Failed to find Node
    7/15/2013 09:07:43 [INFO] PIM - SUCCESS insertAppletRegInfoList.
    7/15/2013 09:07:43 [INFO] PIM - Backup Folder Created
    7/15/2013 09:07:45 [INFO] Utilities - File does not exist
    7/15/2013 09:07:47 [INFO] PIM - SUCCESS installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\DECore\DECore.pimx.
    7/15/2013 09:07:48 [INFO] Setup - Finished Installing package - C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\DECore\DECore.pimx
    7/15/2013 09:07:48 [INFO] Setup - Start Installing package - C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\DWA\DWA.pimx
    7/15/2013 09:07:48 [INFO] PIM - START installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\DWA\DWA.pimx
    7/15/2013 09:07:48 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\DWA\DWA.pimx
    7/15/2013 09:07:48 [INFO] PIM - XML is valid
    7/15/2013 09:07:48 [WARN] PIM - Failed to find Node
    7/15/2013 09:07:48 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\DWA\DWA.pimx'
    7/15/2013 09:07:48 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\DWA\DWA.pima'
    7/15/2013 09:07:48 [INFO] PIM - Package id 99477136-88AD-496B-9551-BAE72699A32C is already installed
    7/15/2013 09:07:48 [INFO] PIM - SUCCESS deleteAppletRegInfoRecords.
    7/15/2013 09:07:48 [INFO] PIM - SUCCESS deletePackageUpgradeInfoRecords.
    7/15/2013 09:07:48 [INFO] PIM - SUCCESS deletePackageInstallationInfoRecords.
    7/15/2013 09:07:48 [INFO] PIM - SUCCESS insertPackageUpdateList.
    7/15/2013 09:07:48 [INFO] PIM - SUCCESS insertAppletRegInfoList.
    7/15/2013 09:07:48 [INFO] PIM - Backup Folder Created
    7/15/2013 09:07:49 [INFO] Utilities - File does not exist
    7/15/2013 09:07:53 [INFO] PIM - SUCCESS installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\DWA\DWA.pimx.
    7/15/2013 09:07:53 [INFO] Setup - Finished Installing package - C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\DWA\DWA.pimx
    7/15/2013 09:07:53 [INFO] Setup - Start Installing package - C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\P6\P6.pimx
    7/15/2013 09:07:53 [INFO] PIM - START installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\P6\P6.pimx
    7/15/2013 09:07:53 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\P6\P6.pimx
    7/15/2013 09:07:53 [INFO] PIM - XML is valid
    7/15/2013 09:07:53 [WARN] PIM - Failed to find Node
    7/15/2013 09:07:53 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\P6\P6.pimx'
    7/15/2013 09:07:53 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\P6\P6.pima'
    7/15/2013 09:07:53 [INFO] PIM - Package id FAFC744B-DDFB-4097-A41D-7E9539FEBAF9 is already installed
    7/15/2013 09:07:53 [INFO] PIM - SUCCESS deleteAppletRegInfoRecords.
    7/15/2013 09:07:54 [INFO] PIM - SUCCESS deletePackageUpgradeInfoRecords.
    7/15/2013 09:07:54 [INFO] PIM - SUCCESS deletePackageInstallationInfoRecords.
    7/15/2013 09:07:54 [INFO] PIM - SUCCESS insertPackageUpdateList.
    7/15/2013 09:07:54 [INFO] PIM - SUCCESS insertAppletRegInfoList.
    7/15/2013 09:07:54 [INFO] PIM - Backup Folder Created
    7/15/2013 09:07:59 [INFO] Utilities - File does not exist
    7/15/2013 09:08:04 [INFO] PIM - SUCCESS installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\P6\P6.pimx.
    7/15/2013 09:08:04 [INFO] Setup - Finished Installing package - C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\P6\P6.pimx
    7/15/2013 09:08:04 [INFO] Setup - Start Installing package - C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\LWA\LWA.pimx
    7/15/2013 09:08:04 [INFO] PIM - START installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\LWA\LWA.pimx
    7/15/2013 09:08:04 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\LWA\LWA.pimx
    7/15/2013 09:08:04 [INFO] PIM - XML is valid
    7/15/2013 09:08:04 [WARN] PIM - Failed to find Node
    7/15/2013 09:08:04 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\LWA\LWA.pimx'
    7/15/2013 09:08:04 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\LWA\LWA.pima'
    7/15/2013 09:08:04 [INFO] PIM - Package id B322281B-C04F-438E-82D7-7DA34A359526 is already installed
    7/15/2013 09:08:04 [INFO] PIM - SUCCESS deleteAppletRegInfoRecords.
    7/15/2013 09:08:05 [INFO] PIM - SUCCESS deletePackageUpgradeInfoRecords.
    7/15/2013 09:08:05 [INFO] PIM - SUCCESS deletePackageInstallationInfoRecords.
    7/15/2013 09:08:05 [INFO] PIM - SUCCESS insertPackageUpdateList.
    7/15/2013 09:08:05 [INFO] PIM - SUCCESS insertAppletRegInfoList.
    7/15/2013 09:08:05 [INFO] PIM - Backup Folder Created
    7/15/2013 09:08:09 [INFO] Utilities - File does not exist
    7/15/2013 09:08:18 [INFO] PIM - SUCCESS installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\LWA\LWA.pimx.
    7/15/2013 09:08:18 [INFO] Setup - Finished Installing package - C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\LWA\LWA.pimx
    7/15/2013 09:08:18 [INFO] Setup - Start Installing package - C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\UWA\UWA.pimx
    7/15/2013 09:08:18 [INFO] PIM - START installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\UWA\UWA.pimx
    7/15/2013 09:08:18 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\UWA\UWA.pimx
    7/15/2013 09:08:18 [INFO] PIM - XML is valid
    7/15/2013 09:08:18 [WARN] PIM - Failed to find Node
    7/15/2013 09:08:18 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\UWA\UWA.pimx'
    7/15/2013 09:08:19 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\UWA\UWA.pima'
    7/15/2013 09:08:19 [INFO] PIM - Package id B1313DE3-08DF-4834-91D9-CBD1A91488E5 is already installed
    7/15/2013 09:08:19 [INFO] PIM - SUCCESS deleteAppletRegInfoRecords.
    7/15/2013 09:08:20 [INFO] PIM - SUCCESS deletePackageUpgradeInfoRecords.
    7/15/2013 09:08:20 [INFO] PIM - SUCCESS deletePackageInstallationInfoRecords.
    7/15/2013 09:08:20 [INFO] PIM - SUCCESS insertPackageUpdateList.
    7/15/2013 09:08:20 [INFO] PIM - SUCCESS insertAppletRegInfoList.
    7/15/2013 09:08:20 [INFO] PIM - Backup Folder Created
    7/15/2013 09:08:21 [INFO] Utilities - File does not exist
    7/15/2013 09:08:27 [INFO] PIM - SUCCESS installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\UWA\UWA.pimx.
    7/15/2013 09:08:27 [INFO] Setup - Finished Installing package - C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\UWA\UWA.pimx
    7/15/2013 09:08:27 [INFO] Setup - Start Installing package - C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\CCM\CCM.pimx
    7/15/2013 09:08:27 [INFO] PIM - START installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\CCM\CCM.pimx
    7/15/2013 09:08:27 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\CCM\CCM.pimx
    7/15/2013 09:08:27 [INFO] PIM - XML is valid
    7/15/2013 09:08:27 [WARN] PIM - Failed to find Node
    7/15/2013 09:08:27 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\CCM\CCM.pimx'
    7/15/2013 09:08:27 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\CCM\CCM.pima'
    7/15/2013 09:08:28 [INFO] PIM - Package id F0158AAB-0779-4B40-A07D-3F2A21D47E74 is already installed
    7/15/2013 09:08:28 [INFO] PIM - SUCCESS deleteAppletRegInfoRecords.
    7/15/2013 09:08:28 [INFO] PIM - SUCCESS deletePackageUpgradeInfoRecords.
    7/15/2013 09:08:28 [INFO] PIM - SUCCESS deletePackageInstallationInfoRecords.
    7/15/2013 09:08:29 [INFO] PIM - SUCCESS insertPackageUpdateList.
    7/15/2013 09:08:29 [INFO] PIM - SUCCESS insertAppletRegInfoList.
    7/15/2013 09:08:29 [INFO] PIM - Backup Folder Created
    7/15/2013 09:08:29 [INFO] Utilities - File does not exist
    7/15/2013 09:08:33 [INFO] Utilities - Path to Process :C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\\CCM\Utilities\AdobeCreativeCloudClient.exe Process Directory :C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\\CCM\Utilities arguments being passed :"C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\\CCM\Utilities\AdobeCreativeCloudClient.exe" --register=true --createShortcut=true
    7/15/2013 09:08:33 [INFO] Utilities - Success in CreateProcess
    7/15/2013 09:08:35 [INFO] Utilities - Sucessfully launched and executed process...
    7/15/2013 09:08:35 [INFO] PIM - Successfully executed install modifier at path: 'C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\\CCM\Utilities\AdobeCreativeCloudClient.exe'
    7/15/2013 09:08:35 [INFO] PIM - SUCCESS installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\CCM\CCM.pimx.
    7/15/2013 09:08:35 [INFO] Setup - Finished Installing package - C:\New folder (2)\Adobe Presenter 8\Build\Setup\packages\CCM\CCM.pimx
    7/15/2013 09:08:35 [INFO] PIM - Processing ... _pimCreateOrUpdateAAMInventory
    7/15/2013 09:08:36 [INFO] PIM - Inventory Already present on the machine...
    7/15/2013 09:08:36 [INFO] Setup - TimeLog: End Installing. Now launching PDApp
    7/15/2013 09:08:37 [INFO] Setup - Deployment File Path not specified in command line arguments. Skipping payload deployment part
    7/15/2013 09:08:37 [INFO] Setup - =================  End Adobe Setup. Exit code: 0  =================
    7/15/2013 09:08:37 [INFO] PIM - PIMSqlite closeDB status 0
    7/15/2013 09:08:37 [INFO] PIM - FREE PIM Instance ...
    7/15/2013 09:08:37 [INFO] DeploymentManager - Build Version - 3.1.105.0
    7/15/2013 09:08:37 [INFO] DeploymentManager - Logging Level verbosity Set  to 4
    7/15/2013 09:08:37 [INFO] DeploymentManager - The return code from the Bootstrapper Process is (0).
    7/15/2013 09:08:37 [INFO] DeploymentManager - STEP 3: Starting to launch ASU AAM.
    7/15/2013 09:08:37 [INFO] DeploymentManager - Bootstrapper launch location is :: C:\New folder (2)\Adobe Presenter 8\Build\ASU\Set-up.dat
    7/15/2013 09:08:37 [INFO] Setup - Build Version - 6.2.136.0
    7/15/2013 09:08:37 [INFO] Setup - Logging Level verbosity Set  to 4
    7/15/2013 09:08:37 [INFO] Setup - Start Adobe Setup
    7/15/2013 09:08:37 [INFO] Setup - TimeLog: Bootstrapper Start
    7/15/2013 09:08:37 [INFO] Setup - TimeLog: Start initial checks
    7/15/2013 09:08:37 [INFO] Setup - Action specified - "install"
    7/15/2013 09:08:37 [ERROR] Setup - Error parsing command line arguments at - "DISABLE_CCM_DESKTOPSHORTCUT".
    Expected arguments are -
        --mode=silent
        --overrideFile="<FilePath>"
    7/15/2013 09:08:37 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\ASU\resources\setup.xml
    7/15/2013 09:08:37 [INFO] PIM - XML is valid
    7/15/2013 09:08:37 [WARN] PIM - Failed to find Node
    7/15/2013 09:08:37 [INFO] Setup - Found 7 packages in setup manifest
    7/15/2013 09:08:37 [INFO] Utilities - Semaphore is not locked
    7/15/2013 09:08:37 [INFO] PIM - Build Version - 6.2.136.0
    7/15/2013 09:08:37 [INFO] PIM - Logging Level verbosity Set  to 4
    7/15/2013 09:08:37 [INFO] Utilities - File does not exist
    7/15/2013 09:08:37 [INFO] Utilities - File does not exist
    7/15/2013 09:08:37 [INFO] PIM - Build Version - 6.2.136.0
    7/15/2013 09:08:37 [INFO] PIM - Logging Level verbosity Set  to 4
    7/15/2013 09:08:37 [INFO] PIM - CREATE PIM Instance ...
    7/15/2013 09:08:37 [INFO] Utilities - File does not exist
    7/15/2013 09:08:38 [INFO] PIM - trying to createOrUpdatePIMDbSchema.
    7/15/2013 09:08:38 [INFO] PIM - Current db schema version on machine 1.
    7/15/2013 09:08:38 [INFO] PIM - Current db schema version to install 1.
    7/15/2013 09:08:38 [INFO] PIM - PIM DB Schema is up to date. Current schema version is 1.
    7/15/2013 09:08:38 [INFO] PIM - PIM Database is Up To Date.
    7/15/2013 09:08:38 [INFO] PIM - Updater Inventory location:C:\New folder (2)\Adobe Presenter 8\Build\ASU\resources\updaterinventory.dll
    7/15/2013 09:08:38 [INFO] PIM - Acquired System level ACF lock ...
    7/15/2013 09:08:38 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\core\PDApp.pimx
    7/15/2013 09:08:38 [INFO] PIM - XML is valid
    7/15/2013 09:08:38 [WARN] PIM - Failed to find Node
    7/15/2013 09:08:38 [INFO] PIM - Package id 5AA1D762-31AF-4FC3-A0C0-66BF663B2117 is already installed
    7/15/2013 09:08:38 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\D6\D6.pimx
    7/15/2013 09:08:38 [INFO] PIM - XML is valid
    7/15/2013 09:08:38 [WARN] PIM - Failed to find Node
    7/15/2013 09:08:38 [INFO] PIM - Package id 54FD72DC-72EC-4CDC-8828-F07C4E9E6FA2 is already installed
    7/15/2013 09:08:38 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\DECore\DECore.pimx
    7/15/2013 09:08:38 [INFO] PIM - XML is valid
    7/15/2013 09:08:38 [WARN] PIM - Failed to find Node
    7/15/2013 09:08:38 [INFO] PIM - Package id 6D2A548B-C50D-46BA-B83E-C8199C6A9406 is already installed
    7/15/2013 09:08:38 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\DWA\DWA.pimx
    7/15/2013 09:08:38 [INFO] PIM - XML is valid
    7/15/2013 09:08:38 [WARN] PIM - Failed to find Node
    7/15/2013 09:08:38 [INFO] PIM - Package id 99477136-88AD-496B-9551-BAE72699A32C is already installed
    7/15/2013 09:08:38 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\P6\P6.pimx
    7/15/2013 09:08:39 [INFO] PIM - XML is valid
    7/15/2013 09:08:39 [WARN] PIM - Failed to find Node
    7/15/2013 09:08:39 [INFO] PIM - Package id FAFC744B-DDFB-4097-A41D-7E9539FEBAF9 is already installed
    7/15/2013 09:08:39 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\LWA\LWA.pimx
    7/15/2013 09:08:39 [INFO] PIM - XML is valid
    7/15/2013 09:08:39 [WARN] PIM - Failed to find Node
    7/15/2013 09:08:39 [INFO] PIM - Package id B322281B-C04F-438E-82D7-7DA34A359526 is already installed
    7/15/2013 09:08:39 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\UWA\UWA.pimx
    7/15/2013 09:08:39 [INFO] PIM - XML is valid
    7/15/2013 09:08:39 [WARN] PIM - Failed to find Node
    7/15/2013 09:08:39 [INFO] PIM - Package id B1313DE3-08DF-4834-91D9-CBD1A91488E5 is already installed
    7/15/2013 09:08:39 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\CCM\CCM.pimx
    7/15/2013 09:08:39 [INFO] PIM - XML is valid
    7/15/2013 09:08:39 [WARN] PIM - Failed to find Node
    7/15/2013 09:08:39 [INFO] PIM - Package id F0158AAB-0779-4B40-A07D-3F2A21D47E74 is already installed
    7/15/2013 09:08:39 [INFO] PIM - pim_haveEnoughDiskSpaceToInstallPackages reqSize ... 29928536
    7/15/2013 09:08:39 [INFO] Setup - TimeLog: End initial checks
    7/15/2013 09:08:39 [INFO] Setup - TimeLog: Begin Installing
    7/15/2013 09:08:39 [INFO] Setup - Start Installing core package - C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\core\PDApp.pimx
    7/15/2013 09:08:39 [INFO] PIM - START installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\core\PDApp.pimx
    7/15/2013 09:08:39 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\core\PDApp.pimx
    7/15/2013 09:08:39 [INFO] PIM - XML is valid
    7/15/2013 09:08:39 [WARN] PIM - Failed to find Node
    7/15/2013 09:08:39 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\core\PDApp.pimx'
    7/15/2013 09:08:39 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\core\PDApp.pima'
    7/15/2013 09:08:39 [INFO] PIM - Package id 5AA1D762-31AF-4FC3-A0C0-66BF663B2117 is already installed
    7/15/2013 09:08:39 [INFO] PIM - SUCCESS deleteAppletRegInfoRecords.
    7/15/2013 09:08:39 [INFO] PIM - SUCCESS deletePackageUpgradeInfoRecords.
    7/15/2013 09:08:39 [INFO] PIM - SUCCESS deletePackageInstallationInfoRecords.
    7/15/2013 09:08:39 [INFO] PIM - SUCCESS insertPackageUpdateList.
    7/15/2013 09:08:39 [WARN] PIM - Failed to find Node
    7/15/2013 09:08:39 [INFO] PIM - SUCCESS insertAppletRegInfoList.
    7/15/2013 09:08:40 [INFO] PIM - Backup Folder Created
    7/15/2013 09:08:41 [INFO] Utilities - File does not exist
    7/15/2013 09:08:45 [INFO] PIM - SUCCESS installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\core\PDApp.pimx.
    7/15/2013 09:08:45 [INFO] Setup - Finished Installing core package - C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\core\PDApp.pimx, Return status: 0
    7/15/2013 09:08:45 [INFO] Setup - Start Installing package - C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\D6\D6.pimx
    7/15/2013 09:08:45 [INFO] PIM - START installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\D6\D6.pimx
    7/15/2013 09:08:45 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\D6\D6.pimx
    7/15/2013 09:08:45 [INFO] PIM - XML is valid
    7/15/2013 09:08:45 [WARN] PIM - Failed to find Node
    7/15/2013 09:08:45 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\D6\D6.pimx'
    7/15/2013 09:08:45 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\D6\D6.pima'
    7/15/2013 09:08:45 [INFO] PIM - Package id 54FD72DC-72EC-4CDC-8828-F07C4E9E6FA2 is already installed
    7/15/2013 09:08:45 [INFO] PIM - SUCCESS deleteAppletRegInfoRecords.
    7/15/2013 09:08:45 [INFO] PIM - SUCCESS deletePackageUpgradeInfoRecords.
    7/15/2013 09:08:45 [INFO] PIM - SUCCESS deletePackageInstallationInfoRecords.
    7/15/2013 09:08:45 [INFO] PIM - SUCCESS insertPackageUpdateList.
    7/15/2013 09:08:45 [INFO] PIM - SUCCESS insertAppletRegInfoList.
    7/15/2013 09:08:45 [INFO] PIM - Backup Folder Created
    7/15/2013 09:08:46 [INFO] Utilities - File does not exist
    7/15/2013 09:08:49 [INFO] PIM - SUCCESS installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\D6\D6.pimx.
    7/15/2013 09:08:49 [INFO] Setup - Finished Installing package - C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\D6\D6.pimx
    7/15/2013 09:08:49 [INFO] Setup - Start Installing package - C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\DECore\DECore.pimx
    7/15/2013 09:08:49 [INFO] PIM - START installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\DECore\DECore.pimx
    7/15/2013 09:08:49 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\DECore\DECore.pimx
    7/15/2013 09:08:49 [INFO] PIM - XML is valid
    7/15/2013 09:08:49 [WARN] PIM - Failed to find Node
    7/15/2013 09:08:49 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\DECore\DECore.pimx'
    7/15/2013 09:08:49 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\DECore\DECore.pima'
    7/15/2013 09:08:49 [INFO] PIM - Package id 6D2A548B-C50D-46BA-B83E-C8199C6A9406 is already installed
    7/15/2013 09:08:49 [INFO] PIM - SUCCESS deleteAppletRegInfoRecords.
    7/15/2013 09:08:49 [INFO] PIM - SUCCESS deletePackageUpgradeInfoRecords.
    7/15/2013 09:08:49 [INFO] PIM - SUCCESS deletePackageInstallationInfoRecords.
    7/15/2013 09:08:49 [INFO] PIM - SUCCESS insertPackageUpdateList.
    7/15/2013 09:08:49 [WARN] PIM - Failed to find Node
    7/15/2013 09:08:49 [INFO] PIM - SUCCESS insertAppletRegInfoList.
    7/15/2013 09:08:49 [INFO] PIM - Backup Folder Created
    7/15/2013 09:08:51 [INFO] Utilities - File does not exist
    7/15/2013 09:08:53 [INFO] PIM - SUCCESS installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\DECore\DECore.pimx.
    7/15/2013 09:08:53 [INFO] Setup - Finished Installing package - C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\DECore\DECore.pimx
    7/15/2013 09:08:53 [INFO] Setup - Start Installing package - C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\DWA\DWA.pimx
    7/15/2013 09:08:53 [INFO] PIM - START installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\DWA\DWA.pimx
    7/15/2013 09:08:53 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\DWA\DWA.pimx
    7/15/2013 09:08:53 [INFO] PIM - XML is valid
    7/15/2013 09:08:53 [WARN] PIM - Failed to find Node
    7/15/2013 09:08:53 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\DWA\DWA.pimx'
    7/15/2013 09:08:53 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\DWA\DWA.pima'
    7/15/2013 09:08:55 [INFO] PIM - Package id 99477136-88AD-496B-9551-BAE72699A32C is already installed
    7/15/2013 09:08:55 [INFO] PIM - SUCCESS deleteAppletRegInfoRecords.
    7/15/2013 09:08:55 [INFO] PIM - SUCCESS deletePackageUpgradeInfoRecords.
    7/15/2013 09:08:55 [INFO] PIM - SUCCESS deletePackageInstallationInfoRecords.
    7/15/2013 09:08:55 [INFO] PIM - SUCCESS insertPackageUpdateList.
    7/15/2013 09:08:55 [INFO] PIM - SUCCESS insertAppletRegInfoList.
    7/15/2013 09:08:55 [INFO] PIM - Backup Folder Created
    7/15/2013 09:08:55 [INFO] Utilities - File does not exist
    7/15/2013 09:08:58 [INFO] PIM - SUCCESS installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\DWA\DWA.pimx.
    7/15/2013 09:08:58 [INFO] Setup - Finished Installing package - C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\DWA\DWA.pimx
    7/15/2013 09:08:58 [INFO] Setup - Start Installing package - C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\P6\P6.pimx
    7/15/2013 09:08:58 [INFO] PIM - START installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\P6\P6.pimx
    7/15/2013 09:08:58 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\P6\P6.pimx
    7/15/2013 09:08:58 [INFO] PIM - XML is valid
    7/15/2013 09:08:58 [WARN] PIM - Failed to find Node
    7/15/2013 09:08:58 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\P6\P6.pimx'
    7/15/2013 09:08:58 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\P6\P6.pima'
    7/15/2013 09:08:59 [INFO] PIM - Package id FAFC744B-DDFB-4097-A41D-7E9539FEBAF9 is already installed
    7/15/2013 09:08:59 [INFO] PIM - SUCCESS deleteAppletRegInfoRecords.
    7/15/2013 09:08:59 [INFO] PIM - SUCCESS deletePackageUpgradeInfoRecords.
    7/15/2013 09:08:59 [INFO] PIM - SUCCESS deletePackageInstallationInfoRecords.
    7/15/2013 09:08:59 [INFO] PIM - SUCCESS insertPackageUpdateList.
    7/15/2013 09:08:59 [INFO] PIM - SUCCESS insertAppletRegInfoList.
    7/15/2013 09:08:59 [INFO] PIM - Backup Folder Created
    7/15/2013 09:09:03 [INFO] Utilities - File does not exist
    7/15/2013 09:09:11 [INFO] PIM - SUCCESS installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\P6\P6.pimx.
    7/15/2013 09:09:11 [INFO] Setup - Finished Installing package - C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\P6\P6.pimx
    7/15/2013 09:09:11 [INFO] Setup - Start Installing package - C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\LWA\LWA.pimx
    7/15/2013 09:09:11 [INFO] PIM - START installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\LWA\LWA.pimx
    7/15/2013 09:09:11 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\LWA\LWA.pimx
    7/15/2013 09:09:11 [INFO] PIM - XML is valid
    7/15/2013 09:09:11 [WARN] PIM - Failed to find Node
    7/15/2013 09:09:11 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\LWA\LWA.pimx'
    7/15/2013 09:09:11 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\LWA\LWA.pima'
    7/15/2013 09:09:11 [INFO] PIM - Package id B322281B-C04F-438E-82D7-7DA34A359526 is already installed
    7/15/2013 09:09:11 [INFO] PIM - SUCCESS deleteAppletRegInfoRecords.
    7/15/2013 09:09:11 [INFO] PIM - SUCCESS deletePackageUpgradeInfoRecords.
    7/15/2013 09:09:11 [INFO] PIM - SUCCESS deletePackageInstallationInfoRecords.
    7/15/2013 09:09:12 [INFO] PIM - SUCCESS insertPackageUpdateList.
    7/15/2013 09:09:12 [INFO] PIM - SUCCESS insertAppletRegInfoList.
    7/15/2013 09:09:12 [INFO] PIM - Backup Folder Created
    7/15/2013 09:09:15 [INFO] Utilities - File does not exist
    7/15/2013 09:09:23 [INFO] PIM - SUCCESS installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\LWA\LWA.pimx.
    7/15/2013 09:09:23 [INFO] Setup - Finished Installing package - C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\LWA\LWA.pimx
    7/15/2013 09:09:23 [INFO] Setup - Start Installing package - C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\UWA\UWA.pimx
    7/15/2013 09:09:23 [INFO] PIM - START installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\UWA\UWA.pimx
    7/15/2013 09:09:23 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\UWA\UWA.pimx
    7/15/2013 09:09:23 [INFO] PIM - XML is valid
    7/15/2013 09:09:23 [WARN] PIM - Failed to find Node
    7/15/2013 09:09:23 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\UWA\UWA.pimx'
    7/15/2013 09:09:23 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\UWA\UWA.pima'
    7/15/2013 09:09:24 [INFO] PIM - Package id B1313DE3-08DF-4834-91D9-CBD1A91488E5 is already installed
    7/15/2013 09:09:24 [INFO] PIM - SUCCESS deleteAppletRegInfoRecords.
    7/15/2013 09:09:24 [INFO] PIM - SUCCESS deletePackageUpgradeInfoRecords.
    7/15/2013 09:09:24 [INFO] PIM - SUCCESS deletePackageInstallationInfoRecords.
    7/15/2013 09:09:24 [INFO] PIM - SUCCESS insertPackageUpdateList.
    7/15/2013 09:09:24 [INFO] PIM - SUCCESS insertAppletRegInfoList.
    7/15/2013 09:09:24 [INFO] PIM - Backup Folder Created
    7/15/2013 09:09:25 [INFO] Utilities - File does not exist
    7/15/2013 09:09:31 [INFO] PIM - SUCCESS installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\UWA\UWA.pimx.
    7/15/2013 09:09:32 [INFO] Setup - Finished Installing package - C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\UWA\UWA.pimx
    7/15/2013 09:09:32 [INFO] Setup - Start Installing package - C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\CCM\CCM.pimx
    7/15/2013 09:09:32 [INFO] PIM - START installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\CCM\CCM.pimx
    7/15/2013 09:09:32 [INFO] PIM - Trying to access xml at path:C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\CCM\CCM.pimx
    7/15/2013 09:09:32 [INFO] PIM - XML is valid
    7/15/2013 09:09:32 [WARN] PIM - Failed to find Node
    7/15/2013 09:09:32 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\CCM\CCM.pimx'
    7/15/2013 09:09:32 [INFO] PIM - Validating package file: 'C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\CCM\CCM.pima'
    7/15/2013 09:09:32 [INFO] PIM - Package id F0158AAB-0779-4B40-A07D-3F2A21D47E74 is already installed
    7/15/2013 09:09:32 [INFO] PIM - SUCCESS deleteAppletRegInfoRecords.
    7/15/2013 09:09:33 [INFO] PIM - SUCCESS deletePackageUpgradeInfoRecords.
    7/15/2013 09:09:33 [INFO] PIM - SUCCESS deletePackageInstallationInfoRecords.
    7/15/2013 09:09:33 [INFO] PIM - SUCCESS insertPackageUpdateList.
    7/15/2013 09:09:33 [INFO] PIM - SUCCESS insertAppletRegInfoList.
    7/15/2013 09:09:33 [INFO] PIM - Backup Folder Created
    7/15/2013 09:09:33 [INFO] Utilities - File does not exist
    7/15/2013 09:09:35 [INFO] Utilities - Path to Process :C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\\CCM\Utilities\AdobeCreativeCloudClient.exe Process Directory :C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\\CCM\Utilities arguments being passed :"C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\\CCM\Utilities\AdobeCreativeCloudClient.exe" --register=true --createShortcut=true
    7/15/2013 09:09:36 [INFO] Utilities - Success in CreateProcess
    7/15/2013 09:09:37 [INFO] Utilities - Sucessfully launched and executed process...
    7/15/2013 09:09:37 [INFO] PIM - Successfully executed install modifier at path: 'C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\\CCM\Utilities\AdobeCreativeCloudClient.exe'
    7/15/2013 09:09:37 [INFO] PIM - SUCCESS installPackage at file C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\CCM\CCM.pimx.
    7/15/2013 09:09:37 [INFO] Setup - Finished Installing package - C:\New folder (2)\Adobe Presenter 8\Build\ASU\packages\CCM\CCM.pimx
    7/15/2013 09:09:37 [INFO] PIM - Processing ... _pimCreateOrUpdateAAMInventory
    7/15/2013 09:09:37 [INFO] PIM - Inventory Already present on the machine...
    7/15/2013 09:09:37 [INFO] Setup - TimeLog: End Installing. Now launching PDApp
    7/15/2013 09:09:37 [INFO] Setup - Deployment File Path not specified in command line arguments. Skipping payload deployment part
    7/15/2013 09:09:37 [INFO] Setup - =================  End Adobe Setup. Exit code: 0  =================
    7/15/2013 09:09:37 [INFO] PIM - PIMSqlite closeDB status 0
    7/15/2013 09:09:37 [INFO] PIM - FREE PIM Instance ...
    7/15/2013 09:09:37 [INFO] DeploymentManager - Build Version - 3.1.105.0
    7/15/2013 09:09:37 [INFO] DeploymentManager - Logging Level verbosity Set  to 4
    7/15/2013 09:09:37 [INFO] DeploymentManager - The return code from the Bootstrapper Process is (0).
    7/15/2013 09:09:37 [INFO] DeploymentManager - Correcting Dependencies in local db.
    7/15/2013 09:09:37 [INFO] DeploymentManager - No media db present on the machine.
    7/15/2013 09:09:37 [INFO] DeploymentManager - STEP 4: Starting to launch Adobe Installer.
    7/15/2013 09:09:37 [INFO] DeploymentManager - Obtained Adobe Common Folder Path.
    7/15/2013 09:09:37 [INFO] DeploymentManager - Adobe Installer launch location is :: C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\Setup.exe
    7/15/2013 09:16:50 [INFO] AAMEEUtilities - Process creation completed.
    7/15/2013 09:16:50 [FATAL] DeploymentManager - The return code from the Adobe Installer Process is (6).Stopping the installation process.
    7/15/2013 09:16:50 [INFO] DeploymentManager - Starting to clean the partially installed payloads.
    7/15/2013 09:16:50 [INFO] DeploymentManager - Undeployment XML created at path :: D:\Users\Vmbuild\AppData\Local\Temp\{2592DDC9-72BD-430A-B2EA-C2839B69B46E}\\{EE4FEE4B-4C1 3-44E5-8C22-230423DB10EF}
    7/15/2013 09:16:50 [INFO] DeploymentManager - Starting to launch the Adobe Installer for uninstall mode.
    7/15/2013 09:16:50 [INFO] DeploymentManager - Obtained Adobe Common Folder Path.
    7/15/2013 09:16:50 [INFO] DeploymentManager - C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\Setup.exe
    7/15/2013 09:20:21 [INFO] PIM-Uninstall - Build Version - 6.2.136.0
    7/15/2013 09:20:21 [INFO] PIM-Uninstall - Logging Level verbosity Set  to 4
    7/15/2013 09:20:21 [INFO] PIM-Uninstall - Start: Adobe Application Manager Uninstall...
    7/15/2013 09:20:21 [INFO] PIM-Uninstall - Get RIBS Product count
    7/15/2013 09:20:21 [INFO] PIM-Uninstall - RIBS Products install status
    7/15/2013 09:20:21 [INFO] PIM-Uninstall - Get NON RIBS Product count
    7/15/2013 09:20:21 [INFO] Utilities - Folder does not exist
    7/15/2013 09:20:21 [INFO] PIM-Uninstall - AAMRefs folder  does not exists. Non-Ribs products does not exist on the system
    7/15/2013 09:20:21 [INFO] PIM-Uninstall - NON RIBS Products install status
    7/15/2013 09:20:21 [INFO] Utilities - File does not exist
    7/15/2013 09:20:22 [INFO] Utilities - File does not exist
    7/15/2013 09:20:22 [INFO] PIM-Uninstall - Launching RemoveAAM from: C:\Program Files (x86)\Common Files\Adobe\RemoveAAM.bin
    7/15/2013 09:20:22 [INFO] UninstallAAM - argc: 2
    7/15/2013 09:20:22 [INFO] UninstallAAM - Loading PIM.dll from: C:\Program Files (x86)\Common Files\Adobe\AdobePIM.dll
    7/15/2013 09:20:22 [INFO] AAMEEUtilities - Process creation completed.
    7/15/2013 09:20:22 [INFO] DeploymentManager - The return code from the Adobe Installer Process is (0).
    7/15/2013 09:20:22 [INFO] DeploymentManager - Provisioning tool launch location is :: D:\Users\Vmbuild\AppData\Local\Temp\{0EAD2103-39AF-4D85-B942-CAC0E462C482}\\{731F139B-D8D 6-4870-AA90-9626C4D6D4E2}
    7/15/2013 09:20:22 [INFO] PIM-Uninstall - Build Version - 6.2.136.0
    7/15/2013 09:20:22 [INFO] PIM-Uninstall - Logging Level verbosity Set  to 4
    7/15/2013 09:20:22 [INFO] PIM-Uninstall - Killing all Non-Deployment workflows
    7/15/2013 09:20:22 [INFO] PIM-Uninstall - Check and wait on Adobe installer (Bootstrapper) if running...
    7/15/2013 09:20:22 [INFO] PIM-Uninstall - Check and wait on Adobe installer (RIBS) if running...
    7/15/2013 09:20:22 [INFO] PIM-Uninstall - Check and wait if ACF is locked...
    7/15/2013 09:20:22 [INFO] PIM-Uninstall - Check and close Adobe Application Manager notifiers...
    7/15/2013 09:20:22 [INFO] Utilities - Semaphore is not locked
    7/15/2013 09:20:22 [INFO] PIM - Executing install modifiers
    7/15/2013 09:20:22 [INFO] PIM - Build Version - 6.2.136.0
    7/15/2013 09:20:22 [INFO] PIM - Logging Level verbosity Set  to 4
    7/15/2013 09:20:22 [INFO] PIM - CREATE PIM Instance ...
    7/15/2013 09:20:22 [INFO] Utilities - File does not exist
    7/15/2013 09:20:22 [INFO] PIM - trying to createOrUpdatePIMDbSchema.
    7/15/2013 09:20:22 [INFO] PIM - Current db schema version on machine 1.
    7/15/2013 09:20:22 [INFO] PIM - Current db schema version to install 1.
    7/15/2013 09:20:22 [INFO] PIM - PIM DB Schema is up to date. Current schema version is 1.
    7/15/2013 09:20:22 [INFO] PIM - PIM Database is Up To Date.
    7/15/2013 09:20:23 [INFO] Utilities - Path to Process :C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\\CCM\Utilities\AdobeCreativeCloudClient.exe Process Directory :C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\\CCM\Utilities arguments being passed :"C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\\CCM\Utilities\AdobeCreativeCloudClient.exe" --unregister=true --deleteShortcut=true
    7/15/2013 09:20:23 [INFO] Utilities - Success in CreateProcess
    7/15/2013 09:20:23 [INFO] AAMEEUtilities - Process creation completed.
    7/15/2013 09:20:23 [INFO] DeploymentManager - The return Code from Provisioning Tool (0).
    7/15/2013 09:20:23 [INFO] DeploymentManager - Provisioning Tool has successfully UnSerialize the product.
    7/15/2013 09:20:23 [INFO] DeploymentManager - The install workflow is terminating.
    7/15/2013 09:20:25 [INFO] Utilities - Sucessfully launched and executed process...
    7/15/2013 09:20:25 [INFO] PIM - Successfully executed uninstall modifier at path: 'C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\\CCM\Utilities\AdobeCreativeCloudClient.exe'
    7/15/2013 09:20:25 [INFO] PIM - PIMSqlite closeDB status 0
    7/15/2013 09:20:25 [INFO] PIM - FREE PIM Instance ...
    7/15/2013 09:20:33 [INFO] UninstallAAM - Self delete called to delete RemoveAAM.bin and AdobePIM.dll...

    Office 2010 64 bit as dependency.
       2. Registry used to fool the application that 64 bit version of PowerPoint is already installed.
    Although source works with 32 bit powerPoint . but MSI need 64 bit powerpoint .

  • Adobe Presenter 9  Scorm 1.2 package does not close..Help!

    Hello.  I am in the process of compiling some 90+ SWIF CBTS into SCORM 1.2 conformant LMS Lessons using Adobe Presenter 9.0 and MS Powerpoint 2010. All works like a charm when compiled in 2 different LMS systems up to the end..  The Lesson Window remains open and it needs to automatically close when the lesson is complete.  .  All the MS PPTX switches are off or not set.. (timing is off, on mouse click of not checked).
    Some research indicates that Adobe may have not included the proper calls based on SCORM 1.2/1.3 standards to close the window - so it remains open and the associate will not get credit for the  course completon.
    Any ideas on what needs to be done to add the proper code to the Manifest XML  (or other XML?)  ... and bear in mind.. this is a non-programmer..
    any help is appreciate!!!!
    Thanks!
    Bill

    The content server is that of a clients so I'm presuming the CMI adapter is working fine as the log shows that the API interactions are working. All xsd files are included within the zip.
    This package works fine in other LMSs e.g. testtrack.scorm.com but I think that objective PK error may well be the issue with this system.
    I'll get in touch with support. Do you think that creating a more complex objective id would work? at the moment I'm setting each section as an objective with id section1, section2 etc.
    edit: I also notice that cmi.objectives.n.objective_key is referenced in the log which is not referenced in my code nor is it part of the SCORM 1.2 specification. Could this non-standard value be required to be set?

  • Adobe Presenter and LMS

    Help--if I create an e-learning course with Adobe Presenter I have three output options for publishing.
    Creation of a flash presentation via HTML (SWF)
    Run it through Adobe Connect Pro
    Publish to a PDF
    Can any of these be supported through an LMS other than Connect Pro?  I'm trying to tie a developed course to an LMS on a large scale such that multiple companies can register many employees and manage, track course completion, etc.
    Dan

    My opinion is positive, depending on your needs. We use Presenter and Captivate for all of our courses. Presenter has ease of use going for it. If you can use PowerPoint, you can use Presenter. That can be good or bad. I believe Presenter is great for straight-forward, click-through courses. Quizzing is decent. It's not a robust, option-laden application.
    Captivate is great for simulations and interactive learning. You can force the learner to participate.
    I haven't used many others out there but Adobe has two winners in these products.

  • Adobe Presenter panel shows garbage Arabic strings

    Hi,
    We are working on a localizing some PPTX files into Arabic and publishing them using Adobe Presenter (SCORM output).
    After publishing in Adobe Presenter, we tried to view the course using Internet Explorer, we found that some strings on the course's right panel appear as junk characters.
    Viewing the same course using another browser (Google Chrome), completely shows all strings.
    Is there any fix that can be done to ensure all Arabic strings are properly shown?
    http://
    Thank you,
    Jenn

    Hi Vikram,
    Thank you for your suggestion.
    The machine we've used has Arabic language pack installed in it.
    The machine was booted to Arabic locale too prior to publishing the course.
    However, these did not solved the issue at all.
    What we found as resolution is to manually fix on the xml file and declare the language for the course.
    One thing that we are now trying to resolve is the Notes section of the published course where the content are not flipped (right-to-left) correctly.
    Is Arabic (including Hebrew) going to be fully supported for Adobe Presenter?

  • Adobe Presenter 8 Video Creator crashes when publishing

    After capturing a video and demonstration using Presenter Video Creator, I am able to edit the video, choose whether I show talking head, demo, or both.  The program seems to record everything as I would expect.  However, when I attempt to publish, it goes to 5% and then gives me this error: "Application encountered an internal error."  It does not matter if I try to publish to my computer, adobe connect, or anything else.  I see so many great possibilities for this product, but if I can't publish, then it is completely useless to me.  Does anyone have a fix for this?
    Adobe Presenter Video Creator version: 8.0.1.260, 64-bit
    Thanks,
    JJ

    Are you getting the internal error during publishing? or is there any other issue with the Video creator.
    Can you explain the whole process at which you are getting the internal error?
    The latest graphics driver provided by Intel is of version (6.14.10.5437) dated 2/13/2013. 
    Did you downloaded and installed the driver by traversing through this link http://www.intel.com/support/oems.htm
    Did it throw any error while installing the driver?
    Please mention your system name and identification number, i'll check whether your system manufacturer is providing any new updates for your graphics driver.
    Also mention the name of the camera you used for recording.
    Please make sure you are following the below checklist for recording any new video.
    This is a general checklist that should be followed before using Video Creator.
    Are your video card driver is up to date? Please check whether you have the latest driver from the manufacturer’s site.  
    Are all unnecessary applications closed?
    Do you have sufficient free space on your hard disk? At least 5 GB is needed, but around 15 GB is recommended.
    Are your webcam drivers up to date? It is recommended to install the webcam driver from the webcam cd or the webcam company’s site.
    Are you capturing your video in a well-lit environment? Most webcams perform poorly in bad lighting.

  • Silent Install for Adobe Presenter 10

    I am getting an error (A valid installer cold not be found) when trying to create a package using AAMEE. I have used this in the past to package Presenter. I have targeted the path to setup.exe and set-up.exe.

    Here is a more detailed explanation from RajeevAdobe
    Instructions for creating Presenter 10 package for 32-bit OS and 32-bit PowerPoint or for 64-bit OS and 64-bit PowerPoint:
    Please launch CCP and Click “Creative Cloud for Enterprise”.
    Sign in using your Adobe ID and click Next.
    Now, click on “Create Package”.
    Select “Serial Number License”.
    For 32-bit OS and 32-bit MS Office, select “32-bit package”. For 64-bit OS and 64-bit MS Office, select “64-bit package”.
    Click Next and enter the serial number for Adobe Presenter 10.
    Now, select Adobe Presenter 10 from the list and create Build.
    Adobe Presenter 10 package is created and you would see “Builds” and “Exception” folder.
    Deploy the contents of build and exception folder just like you do for other CC products.
    Instructions for creating Presenter 10 package for 64-bit OS and 32-bit PowerPoint:
    Please download Adobe Presenter 10 from Adobe.com or from your Adobe Licensing Website (LWS) account and extract the .7z file to a folder by double-clicking the .exe file.
    Once done, please launch CCP and Click “Creative Cloud for Enterprise”.
    Sign in using your Adobe ID and click Next.
    Now, click on “Create Package”.
    Select “Serial Number License”.
    For 64-bit OS and 32-bit MS Office, select “64-bit package”.
    Click Next and enter the serial number for Adobe Presenter 10.
    Now, click on “Offline Media” option at the bottom of the window and navigate to the installer for Presenter 10 extracted in step 1. You may have to select the 32-bit folder inside the extracted setup folder and then build package.
    Adobe Presenter 10 package is created and you would see “Builds” and “Exception” folder.
    Deploy the contents of build and exception folder just like you do for other CC products.
    Deployment Instructions:
    On your  machine you have to open Command Prompt, Right click on it and select Run as administrator. In Command Prompt you have to go to the exact path where Presenter package folder is placed and go inside build folder.
    Once you are in build folder location in Command Prompt then type the command :-    msiexec.exe /i name of the package.msi /quiet and press enter.
    After then please open Task manager , In process tab you will see msiexec processes are running and It will install/deploy the Presenter 10 Package silently on your machine.
    I would suggest you to please remove Adobe Presenter and its older components completely . Delete the left over files and folders manually for Presenter.
    Disable the Firewall and Start up items.
    Reboot the machine and follow the steps mentioned above to create a package and deploy it .
    If you still face any issue then please send me a installation logs as private message .
    Regards,
    Rajeev.

  • How can I show the correct answers in a quiz on Adobe Presenter 10?

    Hi all.
    I'm newer on Adobe Presenter.
    I've finished all questions on the quiz, but I like to show the correct answer after the user select a wrong answer and submit it.
    I've tried many thing and the correct answer isn't displayed.
    Thanks.
    Rafael.

    The correct answers are displayed after the quiz is completed and the user Reviews the quiz. If you want the correct answer to be revealed to the user in the quiz, then you will need to customize the feedback messages to state the correct answer. They are just text boxes on the slides, so you should be able to easily add text to them.

  • I'm having problems with quizzes in Adobe Presenter 10

    I'm having problems with quizzes in Adobe Presenter 10, upon publishing, the text just disappears and the buttons look weird, also the text on submit buttons doesn't show?

    I created a dummy test project with one slide and two quiz questions.  I uploaded to a Connect 9 server for AICC testing.
    Publishing as SCORM, running in IE8 gets the following results:
    Publishing as SWF gets me the following errors:
              Webpage error details
              User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E; MS-RTC LM 8; InfoPath.3)
              Timestamp: Mon, 11 May 2015 20:53:59 UTC
              Message: Expected identifier, string or number
              Line: 101
              Char: 5
              Code: 0
              URI:<REDACTED>/data/html/presenter.libs.js
    After I close this error, my LMS just churns trying to load SCORM.htm.
    Publishing as Both gets me the following errors:
    Webpage error details
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E; MS-RTC LM 8; InfoPath.3)
    Timestamp: Mon, 11 May 2015 21:07:30 UTC
    Message: Expected identifier, string or number
    Line: 1
    Char: 467
    Code: 0
    URI: <REDACTED>/data/html/Project.js
              Webpage error details
              User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E; MS-RTC LM 8; InfoPath.3)
              Timestamp: Mon, 11 May 2015 20:53:59 UTC
              Message: Expected identifier, string or number
              Line: 101
              Char: 5
              Code: 0
              URI:<REDACTED>/data/html/presenter.libs.js
    After this error I get an object expected error on the "loadPrContent()" function in the SCORM_utilities.js.
    After that it's just a blank page.
    Publishing AICC to a Connect 9 server, publish as BOTH, Accessing in IE8 gets the following results:
                   Webpage error details
                   User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E; MS-RTC LM 8; InfoPath.3)
                   Timestamp: Tue, 12 May 2015 19:19:45 UTC
                   Message: Expected identifier, string or number
                   Line: 1
                   Char: 394
                   Code: 0
                   URI:<redacted>/output/data/html/Project.js
                   Webpage error details
                   User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E; MS-RTC LM 8; InfoPath.3)
                   Timestamp: Tue, 12 May 2015 19:21:49 UTC
                   Message: Expected identifier, string or number
                   Line: 101
                   Char: 5
                   Code: 0
                   URI: <redacted>/output/data/html/presenter.libs.js
                   Webpage error details
                   User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E; MS-RTC LM 8; InfoPath.3)
                   Timestamp: Tue, 12 May 2015 19:23:00 UTC
                   Message: Syntax error
                   Line: 1
                   Char: 1
                   Code: 0
                   URI: <redacted>/output/data/resources/ha/wr_/OpenAjaxManagedHub-all.js
    After closing the final error message, I get a blank screen.

  • Adobe Presenter 10 crashes when clicking record

    I am using windows 8.1 and have tried the 32 and 64 bit versions of Office 365 and Presenter 10. Since presenter detects the version of Office you have its always using the right one but i still get crash.
    Every time i load it and hit record i get the error message.
    "Adobe Presenter has encountered an unexpected problem while working with this presentation blah blah blah"  This happens with everything i try to try to record, even new presentations.
    I have also completely reinstalled my entire OS and all of the drivers to ensure its not some i loaded.  I have removed my webcam software completely to ensure its not my video camera as well.
    Ive spent hours on the phone with tech support and quite honestly they are terrible.  They have me go through the stupidest exercises to find the problem every time i call and its still not working.
    The last guy i talked to suggested i use another computer which is absurd to even suggest because that would mean i have to buy another copy of Office since its only good for 1 computer and 1 Tablet, let along the fact that i need to record on my best machine now some laptop.
    Windows 8.1
    Office 365
    Presenter 10
    Intel i5 - 4670k
    NVidia 760gtx Latest Drivers
    Realtek Audio
    GIGABYTE GA-Z87X-UD4H LGA 1150 Intel Z87

    After HOURS on the phone with Adobe people and them being completely useless i finally figure out why i am getting crashes when hitting record.
    Presenter 10 doesnt work with Multi Monitor Setups (at least some of them)
    Im not sure if anyone else has multi monitors and uses Presenter successfully but that was why mine crashes.
    This amazes me quite honestly...Powerpoint by nature is designed to support 2 screens...1 for the presentation and 1 for the controls...for Presenter 10 to not support such a basic thing is absurd.
    Come on Adobe you have been through 10 versions of Presenter and you cant get this right?
    This is like removing the start bar from Windows!!!

Maybe you are looking for

  • DSO and Hierarchy

    Does anyone have any informatio on this? In a DSO, if you right-click on Data Fields, you get two Hierarchy Node options? What are they used for? How are they used?

  • Cross Tab - select dates

    Hi I have created a cross-tab report using only two fields. enrollment_id and create_date. What is needed is a count of the # of enrollments and a summary for the week starting on Sunday. I have been able to do this however, they only want for the pr

  • Variable scope with loaded external SWF's?

    I've got an SWF, call it calcLite, that will be deployed both independently (ie: attached to an HTML doc) and also imported at run time (linked as an external asset via the loader class) to another SWF, let's call it calcPro. That part is working fin

  • How to create a a labview sequence with teststand

    hi  everybody, it might be this question but i haven't found any. I am using TestStand 2.0 and LabVIEW 7.0 and i wanna use labView Sequence adapter to create sequences by using labView step. So that's how i do. 1) After choosing the labveiw standard

  • PO Change after Creation

    Dear all; In this scenario after creation of PO it is possible to change the PO, but Our client requirement is not to change PO after creation .how this is possible ,is there any special configuration for that ? Thanking You; Regards; Joydeep Mukherj