Adobe Reader XI crashes while sending message to it

Hi,
I found Adobe Reader XI crashes while recieving windows message ( sent from SendMessage api) from another exe. same things used to work fine with Adobe Reader X.
Any Idea to fix this?
Regards,
Arvind

No knowledge of the problem, but I'd suggest trying to isolate the problem.
Can you find a single specific Windows message that will reliably crash Reader XI? If so, what are the message parameters in full?

Similar Messages

Imp: Error while sending message: 500 Internal Server Error

Hi all
while testing my scenarios- by sending the message through component monitoring in RWB I get the following error in Integration Server
<b>"Error while sending message: 500 Internal Server Error "</b>
It seems that integration server is not picking up the messages.
Can anyone help me on this?
thanks
Abhishek

Hi Abhishek,
Check whether the integration url is pointing to correct one something like http://host url:http port/sap/xi/engine?type=entry.
Please do refer the below blog:
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Regards,
Prasanthi.

Cannot use Adobe Reader "Mail" button to send via Yahoo mail.

When trying to use the "mail" button in Adobe Reader (or do File -> Send File...) to send the file via Yahoo e-mail, I get the following error:
"An unknown error occurred while uploading the attachment."
Adobe Reader 11.0.10 for Windows.
Getting this error only on Yahoo e-mail accounts
Getting this on multiple Yahoo accounts on multiple PC's.
All PC's have current versions of Reader (11.0.10), all Windows 7/IE11 with current patches.
A client of ours was using this until last week, when it stopped working.
It is not working on any PC right now with Yahoo mail.

Hi johnc46494667,
Please let me know whether you are getting this error since an Adobe Reader update.
Are you signed out of other accounts (except yahoo)?
Does this happen with every PDF file or any particular one?
Hope to hear from you.
Regards,
Anubha

I am unable to print PDF's using either Adobe Reader or Safari. In Adobe Reader, I get an error message from my Cannon printer that says, "/usr.libexec/cups/filter/pstocupsraster failed". In Safari, I can only print the first page of a PDF.

To try to resolve this problem, I have done the following actions.
1 - I have run Disk Warrior.
2 - I have repaired permissions.
3 - I have deleted all plist that are either Cannon or Adobe.
4 - I have downloaded and installed the lastest versions of Adobe Reader and the Cannon printer drivers.
I am still unable to print PDF's.
In Safari, I can print only the first page. In a multipage PDF, Safari only seems to recognize the first page.
In Adobe Reader, I get an error message from my printer: "/usr/libexec/cups/filter/pstocupsraster failed".
Any help would be greatly appreicated!

Quit Safari.
Open the Library folder in your home folder as follows:
☞ If running OS X 10.7 or later, hold down the option key and select Go ▹ Library from the Finder menu bar.
☞ If running an older version of OS X, select Go ▹ Go to Folder… from the Finder menu bar and copy the line below into the text box that opens:
~/Library
Delete the following items from the Library folder:
Caches/com.apple.Safari/Cache.db
Preferences/com.apple.quicktime.plugin.preferences.plist
Preferences/QuickTime Preferences
Relaunch Safari and test.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/cups/error_log" from the file list. Post the messages from the time of the last printing attempt.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.

Error trying to send email -- IOException while sending message

Email is successful when:
I run my application through JDeveloper
or
when I use a classpath, but if I try to execute app via a jar file, i get the following error message: IOException while sending message.
The jar file does include mail.jar and activation.jar.
Below is my email code:
import java.util.*;
import javax.mail.*;
import javax.mail.internet.*;
public class JMAR_Mail {
private String sendTo;
private String sentFrom;
private String host;
private String messageSubject;
private String messageText;
private MimeMessage msg;
public JMAR_Mail() {}
public JMAR_Mail(String sendTo, String sentFrom, String _host) {
sendTo = _sendTo;
sentFrom = _sentFrom;
host = _host;
public void setEmailSubject(String _messageSubject) {
messageSubject = _messageSubject;
} // end setEmailSubject
public void setEmailText(String _text) {
messageText = _text;
public void sendEmail() throws MessagingException {
// create some properties and get the default Session
Properties props = System.getProperties();
props.put("mail.smtp.host", host);
Session session = Session.getInstance(props, null);
InternetAddress addr = new InternetAddress();
// parses comma separted list of email addresses
InternetAddress[] address = addr.parse(sendTo);
msg = new MimeMessage(session);
msg.setFrom(new InternetAddress(sentFrom));
msg.setSubject(messageSubject);
msg.setText(messageText);
msg.setRecipients(Message.RecipientType.TO, address);
msg.setSentDate(new Date());
Transport.send(msg);
} // end sendEmail
}

You don't want to include those jar files in your jar file,
you want to reference them:
http://forum.java.sun.com/thread.jspa?forumID=43&threadID=762763

Error while sending message.

Hi,Could anyone explain the below error message and tell me how can we solve this?
Error while sending message: com.sap.aii.af.ra.ms.api.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldn't retrieve outbound binding for the given P/S/A values: FP=;TP=;FS=NDE_CLNT200;TS=;AN=Z_FI_OUTBOUND_SAP_TO_SIP;ANS=urn:sap-com:document:sap:rfc:functions;
Regards,
sai.

Hello,
I have the same problem here. I already did many times redefine the wohle szenario and also tried out many different adapters. But any time I get the same error message. I checked the agreements and determinations very carefully. The Test in IDR said this:
Senderagreement
<not found>
<Trace level="1" type="B">SENDER AGREEMENT SIMULATION</Trace> <Trace level="1" type="T">Simulating Adapter Engine...</Trace> <Trace level="1" type="T">Simply trying to loolup for the most specific Sender Agreement object</Trace> <Trace level="1" type="T">no objects found</Trace> <Trace level="1" type="T">Note that real results may differ</Trace>
Receiverdetermination
| BusSys_A | MI_HTTPtoJDBC_HTTP
<Trace level="1" type="B">CL_RD_PLSRV-ENTER_PLSRV</Trace>... (4 Zeilen)
Interface-determination
| BusSys_A | MI_HTTPtoJDBC_HTTP | | BusSys_B
<Trace level="1" type="B">CL_ID_PLSRV-ENTER_PLSRV</Trace>... (4 Zeilen)
Interface-Mapping
<not found>
Runtimeerror
com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_HTTPtoJDBC_Input_: RuntimeException in Message-Mapping transformatio~
<Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>... (152 Zeilen)
I hope you can help me getting it working. thank you

Adobe reader has stopped working error message after installing reader XI on windows 7

Adobe reader has stopped working error message when loading reader after installing reader XI on windows 7.
Does anybody know why ?

Dear Pat,
Thank you for your reply.
It is Ver. 11.0.06 for Acrobat XI
No, I can't open the Reader at all. The error message box popped up immediately when I run the Reader

I have an iPad 1. I filled out a PDF questionaire in adobe reader. When I send it to Dropbox, iBooks,mercury browser the form shows up without the answers . My objective is to email the completed form. Please advise as to how to do thisThanks. Big Jake

I have an iPad 1. I filled out a PDF questionaire in adobe reader. When I send it to Dropbox, iBooks,mercury browser the form shows up without the answers . My objective is to email the completed form. Please advise as to how to do thisThanks.
Big Jake

If the PDF is a form fillable PDF, which I assume that it is, email it to yourself or send it to DropBox and open it on your computer. You should see the fields filled in there. It works for me if I do it that way.
Adobe Reader supports it, but the other apps don't. I assume that if you email the PDF to a computer user it would be readable in Adode Reader.

SOAP Receiver- Error While Sending Message: 500 Internal Server Error

Hello,
Our scenario: IDoc to SOAP
I have added a third party system in the SLD and have used the same in my ID configuration.
An idoc will be triggered from R/3, which will received in PI, PI will transform the IDoc into SOAP message for the third party system.
I have tested the scenario in ID from Interface Determination and its successful.
But when i try to try to test it from RWB, using Test Message in Adapter Engine, I get an error,
"Error while sending message:500 Internal server error"
If we test it using a testing software like SOAP UI, it works fine but from PI we get the error mentioned above.
Regards,
Abhishek

Hello,
Since the IDOC adapter resides on the ABAP stack, you can use this URL instead (it will be sent to the integration engine as Venkata suggested)
http://host:port/sap/xi/engine?type=entry
Also check your firewall settings from PI to the third-party system.
Hope this helps,
Mark
Edited by: Mark Dihiansan on Feb 7, 2012 11:48 AM

" Error while sending message: 500 Internal Server Error" RNIF Adapter

Hi,
I have configured B2B integration as   Sender : RNIF adapter & Receiver: XI Adapter.
I am able to test the configuration successfully in ESR and ID. But, whille testing with RWB using same test data, i am getting the following error:
Error while sending message: 500 Internal Server Errot.
     Could you anybody help me, what could be the reason? Even i am not getting any error messages in SXMB_MONI.
Thanks
Laxman

Hope this helps..
-Is the 500 internal SErver Error in RWB is only for this issue and the message is successfully processed in SXMB_MONI?
   Could be the PI Service User :PIAFUSER(Adapter framework user) login crendential issue or run out time error.
Try taking the payload from sxmb_moni and enter it in RWB > Adater engine> Test Message Tab > give proper sender interface information , enter payload and try sending message.   check what is behaviour

Installing Adobe Reader & i get the following message "error 1324 path my documents or volume invali

installing Adobe Reader & i get the following message "error 1324 path my documents or volume invalid". Can anybody help. I have just installed windows 8 on my lptop..

Please share the sanpshot of error message and MSI log created.
Just check if there is any user folder(my documents) redirected. Remove that re-direction and then try re-install
else try installing via MSI installer present at
ftp://ftp.adobe.com/pub/adobe/reader/win/11.x/11.0.00/en_US/

Adobe reader 11 installation fails. error message: there was an error installing adobe reader. adobe

Adobe reader 11 installation fails. error message: there was an error installing adobe reader. adobe reader installation error. null. tried using adobe cleaning tool. using XP sp3. seems that adobe 11 is not completely uninstalling. this is because when adobe reader 11 is removed from add/remove program. when pc is rebooted, adobe reader 11 entry comes back but it is like false entry as no size given. please help to succesfully install Adobe Reader 11. also tried:
1. uninstalled, rebooted, reinstalled 2. installed from different locations 3. removed adobe key from
local machine and tried to install

Seriously, I do not understand what is going on - I have never seen this before!
The MSI installers are usually used in corporate environments to roll out installs on multiple machines. However, you can use it like a normal (EXE) installer; it will just go through fewer steps than the EXE. Not sure if it will improve the situation, but it's worth a try.
Another thing to try is to uninstall these remaining entries using Microsoft Fixit: http://support.microsoft.com/mats/Program_Install_and_Uninstall - also no guarantee, but also worth trying.

Can't install adobe reader on PC/windows 7, Message: windows installer doesn't permit updating managed adversed products. at least one feature of the product must be installed before applying the update.

I can't install adobe reader on PC/windows 7, Message: windows installer doesn't permit updating managed adversed products. at least one feature of the product must be installed before applying the update.

I have no idea what that message means; try uninstalling using http://labs.adobe.com/downloads/acrobatcleaner.html then download and reinstall the latest Reader from http://get.adobe.com/reader/enterprise/

Every time I try to use adobe reader it crashes? (Mac 0s 10.9.3)

Every time I try to use adobe reader it crashes..tried reinstalling but same thing happens! Any ideas?

I would try deleting the program and download it again. Perhaps some part of it didn't download when you originally downloaded it.

Adobe Reader X Crashes after Java Update to Version 7 Update 51

I just installed the new Java update Version 7 Update 51 and now Adobe Reader X crashes in Windows 8.1 within 3 seconds, any advise would be helpful.
Bankruptcy Attorney

Thanks. I've posted there as well. Anyone know if there's a workaround to keep reader from crashing with this form, or is my only option to roll back the servers until the creator of the form updates it?
(I have notified their webmaster of the issue, but who knows how long it will take the state to update the form.)

Adobe Reader XI crashes while sending message to it

Similar Messages

Maybe you are looking for