Advice with Incomplete procedure for Freight Condition re.Certain incoterms

Hi
I need some advice on how to create an Incomplete procedure for a specfic freight accrual.
BUT i only require it to be incomplete for certain Incoterms ........
For example i have not entered freight condition record, and the customers incoterm is CIF, - i wish for this sales order to be flagged as incomplete
However for a different sales order I have not entered a freight condition record, and the customers' incoterm is EXW, - I wish for this order to be clased as OK and Complete, as a Freight accrual is not required against EXW incoterm orders
Has anyone come across this problem before ? - if so how have they rectified this ?
Any help/ advice would be much appreciated
Tony

Hi,
You can just write a routine with the help of abaper in VOFM.
And assign that routine in requirement field in the pricing procedure for that condition type.
To create a new routine in VOFM please go through the belo wlink.
http://saptechsolutions.com/pdf/VOFMCopyRequirementRoutines.pdf
Hope this will resolve your issue.
Regards,
Krishna O

Similar Messages

Report for freight condition records

Dear Freinds
In my transportation module project, requirement is report for freight condition records.
We have been created two tables in one access sequence, two tables are: 1. route/ship-to-party 2. route
They maintained more condition records. They want to see all vondition records in one single report.
Report based on those two tables. But those two tables are storing in KOMG Structure.
But price is storing in KONP table. How to fetch both in to repor.
With regards
Lakki

Let us say the condition tables are 001 and 002
Now you need to go to database tables A001 and A002 in SE16
Give the name of your condition type for which you want to get all the condition records
Execute now.
Now you will get all the condition records for the condition type created for the table say A001
Hope this solves your problem. You can reward if this helps.

Incomplete procedure for PO

Dear All,
I would like to know that if it is possible to set an incomplete procedure for creation of purchase order. I'm not talking about settings for mandatory fields. You know in SD you can customize the incomplete procedure. So when some fields are missing, SAP doesn't allow you to create the sales order. A new screen comes up and shows you the fields that you need to enter. I woluld like to know that if there is a similar configuration for PO as well ?
Thanks in advance..

Hi,
You need to work this with abaper to set up validation for the specific field(s) you need to set as required. You can insert this in the exit for purchasing doc.
Regards,
Bayu

Default Currency for freight condition type in sales order

Hi Gurus,
I have Freight condition type, maintained condition record with combination of Customer, Incoterms & Material Group.
In Customer Master Currency is USD or EURO.
When we create Export sales order, so by default currency should come INR, not USD or EURO for Freight condition type from Customer master.
How to get this requirement.
Regards,
Rakesh

Hi Rakesh,
I think you need a revision on condition table and access sequence for frieght condition records from SD >> basic functions >> pricing >> pricing control >> follow standard pricing configs. Actually, you need to add country ( ALAND ) and destination country ( LLAND ) fields to your table and access sequence for export sales.
After those configs, you can create records in USD or EURO for domestic sales and create records INR currency for export processes.
I hope you can neet your requirement by using this way.
Regards,

Pricing procedure for Header conditions in RFQ

All SAP Gurus,
From where system picks up the pricing procedure for header conditions for request for Quotation (RFQ) maintenance?
Regards,

Purchase order which you have defined for maket price determination.
spro>MM>purchasing>conditions->define pricing determination procedure --->define calculation schema
Regards
Antony

Incompletness procedure for Opportunity at the item level

Hello All,
Have you already worked on the Incompletness procedure for Opportunity at the item level ?
I have the following request : product must be entered in the opportunity otherwise a message of error must appear
I have used the following data in Incompletness procedure (which is assigned to the transaction)
- Object name = ORDERADM_I
- Field name = ORDERED_PROD
- Relevance = Header and Item
The result of this is : when I enter the product in the opportunity, the message of error saying that "Transaction is incomplete: Enter Product" doesn't disappear, whereas the product and quantity are in
I have done another test, if I enter for Relevance = "Item" intstead of "Header and Item", the message of error doesn't appear at all in the transaction. So I can save the opportunity without getting a message...
Any thoughts ?
Thank you for your help

Can you validate if the customizing setting for screen sequence control exists.
Use transaction CRMV_SSC.
you should have a corresponding entry that matches your incompletion log entry.

Incompletion procedure for specific distribution channel

Dear SD Gurus,
I created a sales orders and debugged the system. It is giving an message: u2018Pricing error: Mandatory condition Z900 is missingu2019 and order is considered to be as incomplete. Below is the detail for this message:
Pricing error: Mandatory condition Z900 is missing
Message no. V1801
Diagnosis
The obligatory condition Z900 does not exist. The document is therefore considered to be incomplete from the point of view of pricing.
The cause can be, for example, that a condition record does not exist for condition Z900 or that a field overflow has occurred when the condition rate was calculated.
Procedure
Check why the condition could not be found. Use the pricing analysis function on the pricing screen to do this. If necessary, add the missing condition manually to the document.
This message is getting displayed through standard and not through any user exit. Standard program details are given below where the message is displayed:
Program Name    : SAPLV61A
Include program : LV61AA42
Form Name         : XKOMV_UEBERTRAGEN_NACH_TKOMV
Line No.              : 249
Message no.        : V1801
Now my question here, i have 4 distribution channels. The message is coming out for 02, 03 and 04 dist channels and not for 01. Now i want to know whether Is it possible to remove the mandatory Z900 condition from the incompletion
procedure in the 04 and 01 distribution channels only? While it has to be applicable at 02 and 03.
Could anybody let meknow what and where i have to code. The name of userexit or include will be fine.
Regards
Vinod Kumar
Edited by: Vinod Kumar on Feb 17, 2011 6:21 PM

Is it possible to remove the mandatory Z900 condition from
the incompletion procedure in the 04 and 01 distribution channels only?
Yes provided the sales document type is different from the other, so that you can remove the existing incompletion procedure assigned to sales document type for the above sales area.
where i have to code
Try with the following in case the sales document type is same for all sales areas.
1) User exits in the program MV45AFZZ - USEREXIT_SAVE_DOCUMENT_PREPARE
2) User-Exits in program MV45AFZB - USEREXIT_NEW_PRICING_VBAP
thanks
G. Lakshmipathi

PO payment term for freight condition separate from payment term in header

Hello,
In the PO header we have payment term BB30 (30 days end of month).
they are written in the tab 'delivery/invoice'.
On item level, we have maintained a freight condition in the tab 'conditions'. With the magnifying loop we have maintained the condition details. So we have assigned that condition to a separate vendor (the carrier) and now we want to choose a different payment term for this vendor which is not the payment term in the header of the PO.
Is that possible? How?
Thanks!

Hi,
Maintain desired payment term in vendor master for transporter vendor.
In MIRO, system will pick payment term while doing 'Planned delivery cost' for that vendor.
Regards,
Piyush

Pricing procedure for contract conditions at header level and Item Level

Dear Friends
In Contract Sales Document Type [VOV8]in Contract section Pricing Procedure for Header and Item
What is the function of it
where we can mention list of Pricing Procedure here bec in standard only 3 pricing procedures is available
Kindly Regards
Arun

To have Milestone Billing Plan at header level also, you can maintain Billing Plan 01 in Sales order type (T.Code: VOV8) & for Item level Billing Plan has to be maintained at Item Category Level (T.Code: VOV7).
Regards,
Rajesh Banka
Reward points if helpful.

Problem with Parameter on stored procedure for in() condition

Hello,
I would like to pass a parameter to a stored procedure like :
procedure sps_country(zones varchar2)
is
begin
select * from country where zone in (zones);
end sps_country;
My problem is : when i have one value in "zones" parameter all is OK but when i have 2, 3 ... values in zones with this format : ##, ##, ## there is no error, but there is no results found.
have you a solution please ?
Thanks

Also this document has some suggestions.

Contract with different plant specific freight conditions

Contract with Vendor ABC has 5 line items
Line item 1 & 2 for plant 123
Line item 3 is for plant 345
Line item 1,2,4 & 5 for plant 567
For plant 123, the Carrier is ASDF Trucking Co and the charges are $500 per trip.
For plant 345, no freight
For plant 567, the carrier is LKJH Trucking Co and the charges are $700 per trip.
When we create a PO with reference to the above contract for plant 123 for Line item 1 alone, the freight should be $500 per trip.
When we create a PO with reference to the above contract for plant 123 for Line item 2 alone, the freight should be $500 per trip.
When we create a PO with reference to the above contract for plant 123 for Line items 1& 2 the freight should be $500 per trip.
When we create a PO with reference to the above contract for plant 567 for Line items 1& 2 the freight should be $700 per trip.
How to create such a contract? Do i need to do some config to freight condtion types (pricing procedure)?

Hi
You can create this with std configuration itself.
While creating the Contract, please don't give Plant at the item overview.Just enter the line items and Quantities.
<b>You can maintian the plant specific condition for each line items.</b>
1.When maintaining the centrally agreed contract, choose Edit -> Plant conditions -> Overview.
2.On the overview screen that then appears, enter the desired plant and choose Plant prices.
3.An item overview screen appears, starting from which you can maintain conditions.
4.Choose Item -> Conditions to access the condition maintenance screen.
Return to the overview and repeat the process for all plants for which you wish to store plant-specific conditions.Save your input.
Regards
Ramakrishna

Sales Order : Problem with incompletion log for items

Hello Experts,
I am trying to get the incompletion log details for each item of a sales order. I can get the data from xvbuv[] and xvbup[].
However I am stuck in a strange issue as explained below.
I am working in the exit move_fields_to_vbak . For a given order say O1 there are two items ( I1 and I2 ).
Now for the two items I1 and I2 the exit is getting 3 times.
Call 1 : vbap-posnr is I1, xvbuv[] and xvbup[] is null.
Call 2 : vbap-posnr is I2, xvbuv[] and xvbup[] contains the data for item I1
Call 3 : vbap-posnr is I2, xvbuv[] and xvbup[] contains the data for item I1 and I2.
The problem here is that vbap and (xvbuv[] , xvbup[] ) are not in sync. I want to process the items one by one in each pass ( Call 1 and Call 2 ) but I am not able to get the correct data. Is this normal behaviour and any idea how to deal with it ?
Please let me know if any clarification required.
Regards,
Sayantan

Hello Shiva,
Sorry I wrongly mentioned exit VBAK . I am working with both vbak and vbap exits. vbap is getting triggered twice for two line items 10 and 20. However issue with xvbup[] and xvbuv[] remains, As .
As you can see in the image in call 1 zvbup[] and xvbuv[] is not getting populated. and in call 2 its getting populated for line item 10 not 20. I was wondering if these tables related to incompletion log gets populated after items are processed ?
Regards,
Sayantan

Budget €2300,- Need advice with laptop hardware for AE, Premiere Pro CC/CS6

Hi Folks,
These are some specific questons so if one of you have purchased or upgraded their laptop recently could know some of these things. Otherwise, any informed idea is really appriciated.
I'm planning to purchase a production laptop specially for AE and Premiere Pro.
I've come to understand that my budget allows me to have a nvidia Quadro M3000k. I guess you guys understand why I focuse
on the video card. My reasoning is: finding a machine with 3rd gen core i7, 16 or 32gb of ram, 1080p screen etc is quite easy in todays machines.
But I'm sturggeling to find one with the right, and affordable video card. My budget is arond 2300 euros btw. Give or take a 100.
So:
- Concidering my 2300 euro budget, do any of you know a good machine to suggest? Besides what I mentioned above, I'm looking for one where I can put 32gb ram in.
- In the link below, nvidia itself suggestes some laptops, I ended up with the HP EliteBook 8770w (it may seem quite cheap for my budget but unfortunately me living in Holland means by the time it has been imported and all the taxes paid, the price will be quite a bit more) and Dell Precision m6700 (this one is around 2300 euros in Holland).
http://www.nvidia.com/object/mobile-workstation-notebooks.html
- And am I failing to concider some other important feature folks?
Thanx in advance
Umyd

Thank you folks very much.
Waw I was already searching for a machine with a quadro video card for two days before I consulted you guys and I'm so glad I did!
This is where I ended up now: Alienware M17x
http://configure.euro.dell.com/dellstore/config.aspx?oc=n00w7m01&model_id=alienware-m17x-r 4&c=nl&l=nl&s=dhs&cs=nldhs1
It has a 2GB GDDR5 NVIDIA® GeForce® GTX 680M. Which will make it cuda capable(?)
It does have eSATA port and usb3.
It just seemed to have only two slots for hard drive. Unlike some "worksations" that have 4. Is this problematic?
For hard drive I chose 128GB mSATA Boot Drive + 750GB 7,200rpm SATA 3Gb/s. Plus the eSATA and usb3 ports, it should be fine. Shouldn't it?

MIRO for freight: freight clearing account not getting debited

All SAP Gurus,
We are doing MIRO for planned delivery cost (freight) and facing some problem in account determination.
Actually the ideal cycle goes like this:
The stock account is debited with the planned delivery costs at goods receipt and the system makes the offsetting posting to a freight clearing account. This posting is then cleared by an offsetting entry to the vendor account at invoice receipt.
In our case accounting entries are going correct at the time of GR.
But at the time of MIRO insted of freight clearing account, stock account is again getting debited.
Where may be the problem?
Please help.
Regards,

Hi
Check what are the debit and credit accounts for Freight transaction key in OBYC (check corresponding account key for freight condition in pricing procedure). If you maintain them correctly (generally we only maintain one GL account without specifying debit/credit in OBYC), then entry should be GR/IR freight clearing account debit at time of MIRO.
Check the accounting entry in MIRO - the posting keys you are seeing (when you scroll to right hand side in accounting document you can see transaction).
Thanks

Incompletion Procedure Problem

Hi ! Please suggest a solution to this-
I activated Incompletion procedures for Sales Document Types. However a field-WBS element is configured previously.
If the Z9 Incompletion procedure is activated, with the WBS field removed, then new Sales Orders are working fine.
However previous open Sale Orders dont work with T.Codes VA02,VA03, and a dialog box is poped up informing that this WBS field could not be found.
All open Sales Orders are stuck. Please suggest how can I overcome this?

hi,
please try this way, try to put a deletion flag to the old sales order line items and re enter them as new line items into the same order.
please let me know if it works.
frankly i also did not try this way.
regards
sadhu kishore

Advice with Incomplete procedure for Freight Condition re.Certain incoterms

Similar Messages

Maybe you are looking for