AE 12.1 breaks zooming with the scrollwheel

Hi
Since the update the scrollwheel seems to "work" erratically when zooming a viewer, reacting too late and then zooming too fast. Scrolling works as it should with the other panels.
I'm on a Mac 10.8.5.

We have verified this bug internally in After Effects 12.1 on Mac OS, with a variety of mouse hardware. The problem does not occur on Windows.
The issue is related to scrolling speed. If you scroll very slowly, the scroll action is not recognized. If you scroll at a faster speed, the scrolling action is recognized. This is true for scrolling in all panels, not just viewers; it's possible you only see it in viewers because your intent to zoom via scroll requires more precision.
Apologies for the bug. We are investigating the cause and a fix. In the meantime, my recommendation is that when you need to zoom in via small increments in a viewer, use the keyboard shortcuts, or switch briefly to the Zoom tool.

Similar Messages

My mac always break up with the wifi connection

The serial number of my Mac is :
C0*****FT0
I think after I updated the system at about end of Oct. or beginning of Nov., it started. Always break up with the wifi connection. I went to the tech spot on campus, they told me it's all fine. But my Mac always break up with wifi connection, especially on campus. I don't know if I can go to somewhere to check it? My zip code is 44240.
<Serial Edited by Host>

Hi Ariel_Yang,
Thanks for using Apple Support Communities. This article has steps you can take if you are frequently being disconnected from Wi-Fi:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Cheers,
- Ari

Dear All Has anyone found a break through with the issue of Connect to itunes to use push notifications

Dear All Has anyone found a break through with the issue of Connect to itunes to use push notifications

Did you get any help on this? From what I can see from surfing this site, it's a BUG that no one has offered a solution to. It sometimes happens after a 'reset' and going to ITunes does not offer a way to 'set up push notifications'.

One more nugget: Chart zoom with the "Mouse Over" effect

Hello all.
Just read my signature first, it might explain a lot. I do not intend to compete with Darren and I don't think this "nugget" (at least it supposed to be one) will amaze any of the LV veterans and this forum is rich of them. But maybe it will bring some new ideas to some of you or maybe it will be useful for some LV beginners (like me). It is very likely, my code will have some lapses, but please be gentle pointing that out to me. If you feel a need, you can always optimize the code and develope it further. Just don't forget to share!
So back to the point.
I am developing a project using LV. In my program there is a waveform chart which has to show 4 plots. Depending on the length of the X Scale, it sometimes gets hard to see the plots clearly because of their density.So I decided that I need a tool, which would zoom the chart in. And this is what I have came up with after a few "Google" searches to check which part of the bike is already invented and also a bit of programming by myself.
Maybe you guys (at least the veterans) know the BetterVIEW Consulting LV example where they have implemented the Mouse Over effect. So a part of their example has been used in this tool and part of the credit must go to them. I thank them a lot
This tool uses a cluster and its property of visibility to show/hide the cluster depending on if the current position of the mouse cursor is in the desired range or not. The program also gets the image of the chart and returns the subset of the image. The subset is taken for the area arounf the mouse cursor. So if you move the mouse, the zoomed in area will also chage in response. After that, the subset of the image is zoomed in for better view.
The user might chage the zoom factor during the execution. Also it is possible to turn the zoom option On or Off if you don't wish to see it for the moment.
This is how the front panel looks like:
And this is the image of the block diagram (see the attached files for the vi, the VI Snippet tool distorts the code too much, so I haven't added it):
I haven't found anything the same in the forum. Yet I'm a newbie here and I don't have that much experience surfing it. If it wouldn't be something new (in the forum, not necessarily to some of you personally), just ignore the thread. I hope this was worth your time and your attention.
Good coding
Message Edited by Giedrius.S on 02-11-2010 12:46 PM
While evaluating my code please have in mind that I am a LV novice. Therefore sometimes my code might violate some coding rules that I have to learn about myself. But how else could I do that...
Chart zoom with "Mouse Over" effect
Attachments:
Zoom.vi ‏198 KB
Mouse_pos.vi ‏20 KB
Check_pos.vi ‏18 KB

Very nice Giedrius.
It takes guts to "step up to the chalk board" so I will do what i can to give you some ideas to think about. This is similar to the type of feedback I offer durring our in-house code reviews.
1) The floating property nodes outside the loop are not sequenced by wires so they could execute after the loop starts. Sometimes this could cause weird errors. Seq with the error cluster.
2) Property nodes can be re-sized so you can apply more than one property setting in the same call. Property node have to execute in the UI thread (which is single threaded) so using a single nodes will force a single context switch rather than one for each.
3) Setting the same property repeatedly in a loop just burns CPU. THe Scale min for both X an Y can be moved outside the loop ?
4) THe Wait Until Next ms" function does not get used in any of my code. It is not a way to get a fixed wait but rather a random wait. If you code completes 1 ms after the next multiple, the delay is double less 1 ms. If you have multiple loops using them and it f the delay for each are not unique prime numbers, then the "Wait until next ms multiple" is a good (cough cough) way of getting them all to wake up at the same time and fight for the CPU.
5)An Event Struture to monitor mouse enter/leave and mouse move (this would have to be a sepearte loop) is easier on the CPU than polling.
6) Is that math in the case to handle the Chart position on the FP? If so then using the property nodes for the chart to find its postion will let you code adapt to GUI changes.
7) Right to left wires are not well recieved.
8) A Bundle by Name is prefered over a "Bundle" since it is self documenting. I know the Picture function so I can see that is the rectangle you are specifying but reader not famliar with that function would not be able to "READ" the code without poking at it.
9) THe event structure would also help with setting the Zoom factor. Only poke it when you have to.
That is all that comes to mind at the moment.
Again thank you!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

It is necessary to make zoom with the mouse

When I am working, i can´t make zoom in a pdf or a picture with the mouse, I have to use comand more +. I think that is more confortable use mouse wheel.
Sorry for my english, i am from spain and I don´t write very well in english.
Thank you for your attention.

Hello, Manuel91.
Thank you for visiting Apple Support Communities.
Here is an article that you may find helpful with this issue.
OS X Mavericks: Make the screen image larger using an Apple mouse
http://support.apple.com/kb/PH14082
Cheers,
Jason H.

I can't zoom with the scroll pad within Finder

It worked fine in Snow Leopard, but not Lion. Any help?

I HAVE SOLVED THE PROBLEM FINALLY!!!
Somehow I knew that this was a software problem so I tried to find a solution by deleting the apps one by one... the problem was caused by an app called QuickDo, after I've deleted QuickDo everything was fine. The strangest thing is that I've been using QuickDo for 3 months and everything was working perfectly, until sudenly this problem occurred...

Zoom in and out with the wheel

Hello
I have a mouse with a zoom button wich gives a direct access to the zoom in Adobe Reader. Unfortunatly, when I click it, I can zoom in by spinning the wheel up (the cursor becomes a magnifier whith a plus sign), but not zoom out by turning the wheel down.
Checking the option "Activate the zoom with the wheel" in the preference menu allows to zoom in and out, but precludes from using the wheel for scrolling, so the option is useless.
In fact it seems the zoom button of the mouse activates the function "zoom in" instead of "dynamic zoom", which would give the correct behavior. The mouse software (Setpoint, from Logitech) allows to configure the buttons per application, but has only one zoom option, which leads to "zoom in only" with Adobe reader.
Do you know a work around for this ?

My mouse scroll wheel increments/decrements at 2.4% per click of scroll.
I'm using Photoshop CC (2014.2.1), Mavericks 10.9.5 on MAC Mini and a Bluetooth Gearhead Mouse BT9400.
Same success with a wired optical mouse on a USB port. 2.4% per click of scroll.
Did you try a different mouse or USB port yet?

Vertical Pinch Zoom with Logic 9 & Lion

Trying to figure out an easy way to do a vertical zoom in Logic 9 and Lion
Back in the old days (last week) when I used logic 8 and lepoard, it was easy with cntl up/dn (or something like that, my fingers know the routine)
The pinch work fine for horizontal zoom with the new setup, but how do I do a vertical zoom? (The old cntl/up thing doesnt seem to work any longer.)
Thanks!
Geoff

Greetings,
So far, everything seems as stable as before. Which doesn't actually mean its rock solid, but otherwise workable. I'm running a Focusrite Saffire Pro 24DSP with beta audio drivers. So far, everything is running well. I decided to jump into the 64bit work environment with Logic. I have yet to encounter huge problems with the 32bit audio bridge. Just making sure I bounce everything that is 32bit.
As for everything else within Logic, I can't say I hate Lion. Matter of fact, Lion seems buggier than Logic at the moment. Logic handles well in Lion, but Lion on its own overall is a different can of worms. I am mixed about a 10.7.1 update. Usually, it fixes something on the OS, but breaks something else in Logic.
I have faith that Lion will turn out to be as solid as Snow Leopard. SL was my favorite OSX so far. Lion still leaves allot to be desired in terms of stability.
Again, answer to your question: for me, Logic and Lion play nice.............for now.
LGK

Zoom with ROI tools not working

Hi
I do have a question regarding the zooming with the ROI-tools. If I aquire (Vision Aquisition2) automatically stored images I would like to change the zoom factor interactively. If I am using the ROI tools
of the displayed image the ROI-tools are not working and seems to be de-activated. How can I activate the zooming-tool during the image aquisition?
Is it possible to have an "image in image"-picture whereby the first image shows 100% and the second image for example only 40%? I assume I could therefore use the IMAQ Wind-library.
With the "IMAQ wind draw" I unfortunately get always a extra window with the zoomed image. How can I avoid this and set the zoomed window directly into the existing first image?
thanks

Hi Norick,
I am not sure if I got your questions right..
Are you saying that you cannot use the ROI tools or zoom tools while you acquire images and display them?
I cannot see how the ROI or zoom tools are deactivated during acquisition. This is not the case on my PC.
If you want to have an image in image then the simplest way is to have a second image display connected to
the same image that you already display. You can resize the new image display to be small and hide the ROI toolbar,
label and scrollbars. It will look somewhat like this:
Here is the simple block diagram:
Please let me know if this answers your questions or if I got you wrong.
Best regards,
David

Having trouble with the InDesign cs6 TOC?

I just installed cs6 from the Adobe Cloud, and nearly had a nervous break-down with the TOC. I had all my paragraph styles laid out in my book and created new TOC styles for them. Part of the toc would show come back with the paragraph styles from the book (not what I wanted) and part would be in the TOC style. Totally random! I only had 3 paragraph styles, and I had to fudge and redo all the paragraph styles in the book with the TOC styles, do the TOC and swap again. I wonder if anyone has encountered this problem?

Thanks Tyson, but this is not the case at all. I wish I had done a screen capture but I will try to explain to you what I had.
I avoided nested styles for that one reason and loaded all the styles for the book from chapter 1 so all would be identical.
I had 4 documents in front matter which I named styled as Introduction in the book.
Introduction: 11pts minion pro bold condensed align left (no indent)
TOC-intro Level 1 same as Introduction
8 chapters styled as Chapter-Head
Chapter-Head: 48pts Acens bold align right
TOC-chapterhead: Level 1 11pts Minion pro all caps bold align left (no indent)
Stories under the 8 chapters
Story-Titles: 18pts Minion pro bold align left (no indent)
TOC-storytitles: Level 2 11pts minion pro reg align left with small indent.
This is what I got
The 4 articles in the front-matter were fine except for the last one which had the small indent.
Chapter One came out as chapter-head aligned right
Chapter Two came out as TOC-chapterhead except for bold
All other chapters came out as 48pts Acens but aligned to the left
Most of the story titles came out as 18pts aligned left with indent.
As I redid the toc the story titles came out with the toc style but as I couldn't remove the huge gap created by the chapters and the 48pts, I redid again only to go back to the previous description.
I finally gave everything in the book the styles I wanted in the toc and reloaded all the styles. This time everything came out almost perfect except for the last article which was indented and the 3 first articles page numbers were a 6pt. I could certainly work with that. Then I redid the paragraph styles again in the book and reloaded the styles again.
As you can see everything was scrambled up and I am wondering if my install is faulty somehow. I downloaded CS6 from the Creative Cloud and I am working with Windows 7.

Vertical zooming with toggle wheel?

Only been a few days but so far the most difficult thing for me transitioning into CS6 from 3.0 is the lack of vertical zooming with the mouse's toggle wheel in multitrack view. The sidebar just scrolls now--no zoom. I know there's a little button for that below the tracks but...its just not the same lol and it never zooms where I want it to. This is slowing me down like crazy and hoping there might be a way to enable that I don't know about. I'm not seeing anything about it in the forum or preferences in the program. I know it seems like nothing but for someone who's been using 3.0 nearly everyday since it came out this one simple thing is really difficult to get used to. I was perfectly happy dragging the bar for scrolling and zooming all in the same place.
Besides the muscle memory side of things--it seems like having to take your eyes off the multi-tracker to hit that button a few times instead causes one to 'lose their spot' so you can easily lose track of what your zooming in on in the first place. The bottons wont even zoom to the center its like its just some random spot that its zooming to. Having to look at the keyboard for the key commands (as another option) isn't any better for workflow and still gives me no control over the vertical zoom destination...I have to scroll through everything to find what I'm looking for (not cool when there's like 50+ tracks going) after I'm zoomed in only to find out I need to zoom in further and the process repeats. So at this point what used to be quick stroke of the toggle wheel is now a process lol.
IF no vertical toggle wheel zooming is there at least a way to control the location of vertical zooming? or at least the degree of it rather than the intervals provided by the buttons or key commands?

Brevity being what it is...
ver·ti·cal
[vur-ti-kuhl] http://dictionary.reference.com/help/luna/Spell_pron_key.html
adjective
1.
being in a position or direction perpendicular to the plane ofthe horizon; upright; plumb.
2.
of, pertaining to, or situated at the vertex.
3.
of or pertaining to the cranial vertex.

Magic mouse zoom with ctrl

Good day,
I am new with mac and I am trying to use the zoom with the magic mouse and the ctrl button, really not easy...
on excel/word: alt + cmd + scrolling up & down executes zooming in and out of the excel table (only).
but on the picture viewer/safari: ctrl + scrolling up & down executes zooming in and out of the complete screen (and not only the picture) without possibility to move the view (and this is possible only if the option is selected in preferences/accessibility/zoom: allow zoom with scrolling and selected button).
Would someone know how to activate the zooming with ctrl and mouse scrolling but only of the content of a window and not of the complete screen?
Thank you in advance.
Rodolphe

Hello:
According to the guidance in system preferences>mouse double tapping with one finger does it. I just tried it and it works here.
I also note the right clicking opens a menu.
Barry
Message was edited by: Barry Hemphill

Zoom in the app

hello i have a question, in the content viewer i can zoon the folio with my fingers in and the image looks pixelated, my question is : when i export the app it will alow to zoom with the finger or is just in the content viewer.
thanks

There's a setting in app builder you can turn off to disable zoom for iOS. We do not support disabling this setting on Windows or native Android.
Neil

LR5 Issues with the CC Version?

Hello,
I've had a few deal-breaking issues with the released version of LR5 for Windows and read about several others. There seems to be some consistency with the types of issues people are having with, at least, the Windows version of the software. I think that Adobe is splitting the code stream with LR5 since it is offered as both a stand-alone product and as part of the Creative Cloud.
Done with LR5
Spot Removal Mouse Movement
(several other issues are mentioned within the above threads)
I am wondering of any Creative Cloud users of LR5 are having the same problems that have been reported in this forum with the stand-alone version.
Thanks,
~Steve

Experiencing same problems with spot removal in Lightroom CC (2015).
I'm going to look for a new LR CC thread but posting here for now.
Using iMac 5K
4Ghz i7
16GB Ram
AMD Radeon R9 M290X 2048 MB
Wacom Intuos 3. Performance with tablet slower than mouse but still lots of lag with the mouse. Again, slower when 1:1 but also plenty of lag when FIT.
Anyone having similar experience with LR CC - thoughts much appreciated?

Zoom with Scrollwheel in PSE8?

Hello,
in PSE5 it was still default that with using the mouse scrollwheel you could zoom in and out the image / work region. Since PSE6 this function seems not to be available anymore. I want to use PSE8 and the question is if there is way to enable zooming with scrollwheel somewhere in the program?
Thanks very much upfront!

Ahhhh....thanks for your help! That was stopping me from using pse8 and I kept going back to pse5...now
I'm ready to go!
xoxoox Sue

AE 12.1 breaks zooming with the scrollwheel

Similar Messages

Maybe you are looking for