AE Crashing and Errors

Hey I am having issues with AE crashing when i try to scrub through a project. This is a particle build logo. Also when i try to render the project I get this error
Once I get this error I cant even close the programme without going Ctrl, Alt Del???
Can anyone help please?

Hi.
I am using AE CC 2014 (all up to date) on Windows 7. I have heaps of power including new GTX 980 Graphics card.
The problem seems to occur when I try to render after time re map. I have built a particle build up logo then done time remap to reverse animation.
The effect was created using Trapcode Particular. I have never tried this before.
Is this enough or what else would you need to know?

Similar Messages

  • Iphoto crashing and ERROR message when trying to EXPORT to slide show

    I am producing a simple Slide Show to be shown tomorrow at 8am.
    I created it in IPHOTO but an older version. I did some tests last night and today. Worked fine.
    Now that it is done I tried to EXPORT it to Quicktime, as a H.264 Quicktime movie.
    Dimension 1280x 720
    Stills only and no music. Classic with simple dissolves from one photo to next.
    Export and proceed and I leave it alone. After about 1/2 hour or so it crashes and give ERROR message and say
    "unable to process" or complete.
    I have tried several times and changed specs. Still crashes.
    What happened to Apple's Chat Support? Are then not online after a certain time?
    On an IMAC with 16 Gbs of RAM, and have space left on drive. this is not complex.
    anyone? It is due tonight so I can Hightail send it to AV people and it needs to be downloaded
    tonight or EARLY tomorrow for showing at 8am.
    thanks to anyone who can help.
    jc

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
    SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, select
    DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    ☞ If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    ☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • Multiple Crashes and Errors

    I accidentally posted this in another forum, so I'm going to paste my old post here, and see where it gets me:
    "I've posted this on the discussions forum, but I thought I would ask everywhere just incase.
    When I try to delete my trash, the Finder restarts/relaunches, and the files in the trash do not delete, unless I hold down the Optionopenapplecontrol keys when I attempt to delete.
    Alternately, I cannot delete or bounce any messages in the Mail program. The program crashes. This just started recently, as in the last couple of days. I really need this to be fixed, as I have people who need to use the computer and I don't want to have to take it back for repairs. It was repaired, had the logic/mother board replaced last month because the fans ran at full speed, even with snow on the ground and an airconditioner running full speed, and an Airport card put in.
    Other info:
    G5, iMac, OS X 10.3.9
    256MB RAM, 74 GB originally, 54.87 GB remaining
    Purchased October 29, 2004 w/the three year support.
    What I have tried:
    Repaired permissions through the regular permission repair, and the Install/Start Up CD.
    Trashed the mail.plist file.
    Moved the Mail folder to the desktop.
    Ran disk first aid through the Install/Start Up CD.
    What I am going to try next:
    Norton Disk Doctor via Start Up. It got an error with the regular program, then crashed. Something about a leaf? It seems when I get a pop up or warning that requires "OK" or "Cancel", the program crashes. Any idea why this is happening? Is it my software? What is it? How can I fix it? "
    I was told not to use Norton at all, but I did, as I hadn't checked the messages before running it, and it said that I had major problems, but "fixed" them. I noticed that Everytime my computer gives me an option that will make a major change (bouncing an email, permanently deleting emails from Mail, emptying the trash), the program will crash OR the Finder will relaunch. This just started yesterday afternoon, around 6pm, after I had printed large amounts of printouts. I'm unsure what caused this, as it seems lately just using the computer causes it to malfunction, and need repairs. I really don't want to put it back in the shop. I was told, in another forum, to use Disk Warrior:
    http://www.alsoft.com/DiskWarrior/details.html
    Would that work or help? Is it better than Norton? I really can't afford to keep putting my computer in the shop, not financially, as it's free, but time wise and the fact that I need it for work, now, would really make it hard for me to get other things done. Any solutions? Suggestions? Thoughts? Ideas? I'm open to anything here.

    Hi (again) Christine,
    For starters, have a look at:
    http://www.thexlab.com/faqs/repairprocess.html
    Joe

  • Crashing and errors when I try to access the App Store

    Every time I try to update my software or access the App store on my iMac, it crashes with an error report. I don't know what to do? I have
    OS X 10.8.2, but I can't hit software update without the crash report. Help!

    Finally found a “genius” that was able to fix it – buried deep in the root folder was a cache folder that had to be rebuilt.  He had to create a new "text" account on my machine, access the app, and then copy the cache file from the test account over to my account and change all the permissions so that it would allow me to access it.  The presto – both apps began to work correctly.

  • When i try to attach files in hotmail, i get a message that silverlight plugin has crashed and error report indicates error about plugin-container.exe ; ihave the latest silverlight plugin. what to do?

    * I work on windows XP
    I have latest fire fox and silver light plugin
    * "silver light plugin has crashed" is what i get when i try to attach files in hotmail
    * error report indicates about plugin-container.exe.
    * where to find plugin-container.exe. to install and try

    Hi,
    Please also try to '''Disable''' the Silverlight add-on in '''Tools '''('''Alt '''+ '''T''') > '''Add-on''' > '''Plugins''' before opening Hotmail. You may still be able to attach files.

  • Cs4 inDesign crashes and errors on export to swf

    I have exported successfully to swf on this file previously. Super it worked so now I added more links here and there. Now when I export I receive "An error occurred while flattening" on one of 3 pages (it seems to pick one at random). I've edited those images and attempt to reexport. Sometimes it crashes, sometimes the above error on page 35-36 or 41-42 of a 76 page doc. I must be doing something wrong. I at first thought I corrupted the file and recreated it 3 different ways...export to xml and rebuild, export to inDesign markup ...rebuild, tried manual rebuild with the print file... same errors/crashing. Any ideas what I might try?

    I exported same file now as pdf (this file went to print so I know it was not corrupt)
    and NOW (random_error_message_whileExporting_567) Error is "Error encountered while reading JPEG image. Image may be damaged or incompatible. Resave the image with different settings and try again."
    any way to determine what image causes the error? its making my head dizzy!

  • Muse 2014.3 Crash and error message - Image frame thinks it belongs to the page

    I am trying to update an asset in my assets panel, but every time I try to update the asset, relink the asset, or delete the object containing the asset Muse crashes with the following error message:
    "Link updated. Image frame thinks it belongs to the page. but the page disagrees."
    I've sent this file to the Adobe email and linked the forum per requested for this same file, and I've never heard back from Adobe.

    Please send your muse file at [email protected] along with this forum link in subject line. We will try to check the file and will update you over email.
    Thanks,
    Sanjit

  • CS3 Crashes and Error Reports

    I am new to CS3 and whilst working through some tutorials in Magazines, CS3 crashes with no warning. I am sure you understand the frustration!!
    Once closed it generates an error report which can be sent, if you fill in your email address you should get a response....
    I have sent this error report 7 or 8 times and had no feedback at all. I now feel I cannot use the software as anything I do is lost at every crash.
    Where do these report go to and is there a solution??
    Thanks in advance...

    I still advocate Repairing Permissions (with Apple's Disk Utility) before AND after any system update or upgrade, as well as before AND after installing any software that requires an installer that asks for your password.
    I have seen software installations go sour because the installer did not find everything as and where it should be.
    I have also seen software installations go bad because the installer did not clean up after itself properly and did not leave everything as and where it should be.
    This is just my own personal opinion and practice based on my own observations. Others may disagree and that's OK. I can only base my routines and my advice to others on my own experience and conclusion. I don't pretend to know why others believe otherwise.
    Repairing Permissions after the fact (i. e. not immediately before and after an install) may NOT help. Try it anyway, though.
    ====
    Additionally, if your machine does not run 24/7 so that it runs the daily, weekly and monthly Cron Scripts in the middle of the night as intended by Apple, run Cocktail (shareware) as well.
    Cron Scripts are maintenance routines designed by Apple to run on a daily, weekly and monthly basis in the middle of the night.
    If you don't run them, you WILL run into trouble, sooner rather than later.
    Here's an excerpt from the Apple tech doc http://docs.info.apple.com/article.html?artnum=107388
    Mac OS X performs background maintenance tasks at certain times if the computer is not in sleep mode. If your computer is shut down or in sleep at the designated times, the maintenance does not occur. In that case, you may want or need to run these manually.
    Mac OS X periodically runs background tasks that, in part, remove system files that are no longer needed. This includes purging older information from log files or deleting certain temporary items. These tasks do not run if the computer is shut down or in sleep mode. If the tasks do not run, it is possible that certain log files (such as system.log) may become very large.
    Also, from: http://docs.info.apple.com/article.html?artnum=106978
    The disk activity generated by find is a normal part of file system maintenance, used for tasks such as removing invisible temporary files that are used by the system. It is scheduled to occur early in the morning at 03:15 everyday, 04:30 on Saturdays, and 05:30 on the first day of each month.
    NOTE:
    There have been comments to the effect that Apple "fixed" this in 10.4.2 and later versions of the OS, but I have not been able to verify this to my satisfaction. The reference in the 10.4.2 release notes are far from explicit on this subject.
    = = =
    If you have DiskWarrior, run it regularly too.

  • Crash and errors

    Im using a MAC with the newest operating system.  Now my Premiere Elements 12 crashes all the time and shows a ton of error messages!

    It seems that there is a conflict in accessing memory. When I replaced the video card driver to the older, I noticed that CrushDoctor can not recover from the terminate dreamweaver.exe, endlessly shifting to other memory addresses. Before replacing the driver of such attempts have been up 2-3 times. But, given the experience run in Safe-Mode, it is not clear which system process in the memory, can interfere dreamweaver any version?

  • App Store can no longer be opened.  Immediate crash and error message "App Store can not be opened because of a problem"

    App Store won't open, error message "App Store can not be opened because of a problem".  I haven't been able to update anything for a week or so.  I have used Disk Utility, Drive Genius, deleting the .plist, all to no avail.  My Mac Mail hasn't worked since the upgrade to Mavericks.  Mavericks can't see my LaCie Cloudbox.  Can any of these be solved by me? 

    I have the same error "XXXX App cannot be opened because of a problem". And I also cannot open iTunes and get the error "This copy of iTunes is corrupted or is not installed correctly.  Please reinstall iTunes."
    Only Apple apps seem to be at issue here...
    Repairing Permissions did not fix this.
    I noticed this after the last Software update. Is there no fix other than re-installing?
    Not happy that an Apple software update killed all my apps...

  • I keep getting crashes and error messages when trying to use LiveCycle. So far, the most I have been able to is create and name 3 text boxes.

    Despite having uninstalled, reinstalled, change compatibility, run as admin and a host of other "fixes", LC keeps crashing, closing out and otherwise failing to operate. At this point the most I have been able to accomplish has been inserting 3 text boxes and then naming them. As soon as I change the caption name on the 3rd box (or sooner) the program stops working and I get the wonderful message from windows telling me, the program has stopped. I needed the extra input from Windows because, you know, when the program crashes I was just thinking it was naptime.  2.5 hours I have spent so far trying to fix this. Someone please help me!!

    I am not sure what you mean by "Flash Player for steam"; the only Flash Player installers I know is the ActiveX (for Internet Explorer) and the plugin (for other browsers); you can find both at http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header
    [topic moved to Flash Player forum]

  • IOS Signature Settings for Multiple Email Accounts causes crashes and errors

    Hello Everyone,
    I've been having troubles with iOS email signature for severals years from iOS 4 (?) through iOS 7 on everything ranging from an iPad2, iPad3, IPad Air, and various iPhones.  I'm currently on an iPad Air 128GB WiFi running iOS 7.1.2.
    I have about 12 email accounts. I have it set to a unique signature per account. Whenever I try to scroll the list of signatures in the settings app, it will often have greyed out areas where a signature is supposed to be (especially after adding a new account). Other accounts will blur together and overlap each other. Very often the whole settings app crashes. Once the crashes start, they happen more frequently and you basically have to Power Off and Restart the iPad to get it back to a somewhat stable state.
    I've come to accept that the Mail Signatures is broken and not stable. But maybe I'm just doing it wrong. So, I ask you great and wonderful Apple Community: Any suggestions? Or just keep on like I've been doing for the last several years?
    Thank you!
    Paul Holje

    this crash has been present since ios6 (apparently). it's apparently caused by a buffer overflow (i've not yet examined the crash files i've been generating) because the engineers never tested use cases such as yours or mine.
    a painful workaround is to disable all your email accounts but one, edit its signature, then disable it, and enable the next one, and so on. ios saves the correct signature for each account and the settings app crash does not occur.
    hope this helps

  • Major issues with my iMac- crashes and errors

    In the past 2 weeks I have had multiple issues with my computer. 3 times the OS has crashed- twice I had to pull the plug to get it to do anything. I can't open Photoshop. I can't print. Adobe Bridge keeps crashing. I have to turn Airport off/on about once an hour because the internet stops working. This is my first Mac and I've had it about a year and a half, so I don't know a lot about the system. Most of my work is stored on an external hard drive and I have 292.32 GB available. I am looking for suggestions to get running normally agian because I really can't lose several days of working by taking this to an Apple store (45 minutes away). Thanks in advance for any help anyone can give.

    It's good to hear that repairing permissions helped resolve the issue. Your Mac logs a lot of data about how the system is performing. Of particular interest is the CrashReporter logs that can be viewed by launching the 'console' application which can be found in the applications/utilities folder. In the left column you can open up the ~/Library/Logs where you will see then see the CrashReporter log. Open it up and you will probably find a number of crash reporter entries which may yield clues. It may be necessary to provide more details from the logs and let some of the expert users provide suggestions. You may find that some of your software is not up to date.
    This CNET article provides an overview of the Crash Reporter:
    http://reviews.cnet.com/8301-13727_7-10330727-263.html

  • I need to fix slowness, crashing and error messages upon sending

    Using Mozilla Thunderbird for e-mail was working fine for about a year - then in the last month or so, it became extremely slow to send - often not sending at all - even short e-mails without attachments. I get errors such as not able to save to sent-mail and needing authentication, network issues, etc.

    And your anti virus package is?

  • CS:GO crash and error in wine and GPU ID spoofing.

    I tried this on the WineHQ forums but got no help (it looks like there is only one guy who answers all the questions.)
    I am trying to install CS:GO in wine in steam and am getting this error "Your graphics hardware does not support all features (CSM) required to run this game."
    OS:Arch Linux x64 kernel version 3.12.6
    Wine version: 1.7.9 (I have tried a few others too)
    Hardware: Radeon HD 7790, 8GB DDR3 RAM, AMD A10-5800k.
    Driver: Vi0L0's latest FGLRX diver
    I searched for hours and tried many different things and nothing worked.
    I did see a few posts on random websites about editing your wine registry to spoof your GPU name but I saw no information on how to do that.
    Does anyone have any idea how to spoof your GPU model and vendor ID? or does anyone know a way around this without having to mess around in the registry?

    Hello.
    I had the same problem until I installed steam using winetricks.
    What you need to do is disable Steam overlay. The safest way I found(thanks to winetricks) was to disable *gameoverlayrenderer in winecfg, like this:

Maybe you are looking for