After 4.1.2 update bad issues with gs3

I was prompted to run the new 4.1.2 update and did so. All seemed to work ok at first until I tired to load a picture into a text message. The phone would keep locking up and forcing me to restart my device. Upon further review, my gallery tab has completely changed once clicked (which is ok, no big deal) but it no longer works. Every single time i try to load up my gallery tab, my phone freezes and shuts down. I thought i had gotten a virus so i changed every password i could while i did a hard/full reset on my phone. I went thru the initial start up just as if i had boughten the phone new again and guess what, same problems but only worse. I took the micro sd card out of my phone and plugged it into my desk top and it force closes every single time and it keeps telling me that my micro sd card is corrupt now. I am absolutely furious that this is going on, I have a 9-month old child and take a ton of pictures, all of which are gone now. All of my music too. So as it appears right now, not only is my phone so glitchy now that it is all but unusable (no longer holds phone calls for more then 30seconds or WIFI connection is toast on the phone as well and the phone gets SUPER hot). My wife has an Iphone4 and she never drops a call or wifi and our phones can be side by side. I have lived in my current house over a year and never had issues until my phone updated 2 nights ago. So now i have a ruined 32gb micro sd card, and a phone that is basically a paper weight (not a good one either, may burn my house down as hot as it gets) Battery life is down to about 4hours max because the phone has SO many perment apps that it will not let me shut off. I really need help with this 4.1.2 update before my wife and I leave verizon. Have had a great phone until this update, now its junk, it has wiped out a lot of memories from my 9month old that i will never get back. someone please help me, for the sake of everyone, you dont want my wife and i to show up to the store this livid that our $700 phone is now useless.

Doing the master reset has helped my phone out a bunch. It appears to be working properly at this time. I did however have to erase and reformat my microsd card which means I lost all of my photos and vids. My backup assistant says it is running and updateing but it however hasnt backed up a pic or vid since christmas (I can tell by the photos and remember when taken). None of my newer photos (since Christmas 2012 until now) were backed up. Nothing I can do about it now, they are gone which sucks, I have my first child (10 months old now) whose photos are all gone. That hurts pretty badly when my phone was working just fine (the update ran over night in my sleep). I woke up to see that my phone had updated, I was excited until I tried to use my gallery and realized my card was corrupted. I took the card out of my phone, plugged it into my computer and my computer even froze trying to load the pictures on it (my computer is/was brand new in march so its not like its an old clunker). The only issue I am still seeming to have is the fact that my phone is still getting really hot. It is not as hot as it was before the master reset but it is still hotter then it was prior to 6/30/13 when the update first ran. It seems like there is a process or feature that is always on that is making it over heat.

Similar Messages

  • Imovie 11 failing to start after 10.6.5 update (same issue with iphoto)

    Hi,
    My imovie 11 is now failing to start after 10.6.5 update, I reinstalled ilife and it's still failing.
    Same issue for iphoto .
    Help
    Benoit

    help help help. imovie 11 works fine until i populate iphoto with any photos what so ever then it just fails to kick off after looking for new video from iphoto. works fine again when i delete the iphoto libary but i don,t want to do this each time i want to use imovie.....very disapointed

  • After update performance issue with certain PCs

    Over the past 2 months there was an update to the Forefront Client that caused a strange issue on some of our machines.  Basically when we update device drivers MsMpEng.exe goes nuts and uses at least 50% to 98% of the CPU for the entire duration of
    the driver install/update.  
    The immediate result is that some of the larger device driver installs (like video drivers) actually time out because of this.  Using procmon I traced the cause of the delay. It looks like MsMpEng is scanning the setupapi.dev.log file over and over
    and over..hundreds..maybe thousands of times.  We noticed that if we turned off logging for the device driver udpate/install and app install logging that this issue disappears.  We've had this level of logging for years and only in the past 2 months
    or so has this issue started to pop up.  The setupapi.dev.log file is rather large and so I can see why it's causing a delay if it has to scan the file over and over and over.
    We aren't sure what changed.  We used an older image that had an older version of the Forefront client installed and we made sure it didn't update to a newer client version.  That version of forefront had no issue with device drivers timing out. After
    updating the client we now have the issue. A change was made recently and we believe the forefront client is behaving differently.  
    Any ideas about what could cause this?
    Thanks.

    Hi,
    Thanks for your question.
    How did you perform the update of Forefront Client Security, from windows update or manually? In addition, what are the editions of the Forefront Client Security now and before
    you updated?
    Best regards,
    Susie

  • Java update (removal) issue with ETRADE.

    After the most recent Java software update that removed Java I am having and issue with my ETRADE Marketcaster real time quotes. After the update I opened Marketcaster and was prompted to download Java from Sun. When I run Marketcaster now it's very very slow and the real-time updates are far from real time. In the past when I opened Marketcaster it would load all 75 stocks that I track instantly. After the update it loads them line by line and takes about 1 minute to fully list all 75. Also when I try to change any font sizes or rearrange columns the caster goes crazy and starts showing multiple versions overlapping each other.
    Thanks

    In addition:
    Java has nothing to do with using the 360 view. You don't even need Java installed. Using 360 takes a bit to get use to and setting up, but it works very well. I double tap on the window bar to zoon the window to the full screen width also so I can see it better.
    For your java issue, I'm not sure that Java 6 works with the latest security update. I haven't tried to reinstall it myself.
    Follow macjack's instructions to install the old plugin back. You will also need to check the Utilities folder to see that Java 6 SE is there and enabled. If it isn't, you can restore it from a TM backup and check the settings to make sure it is enabled.
    When doing the above, close browsers first.

  • After several repairs, still having heating issue with MacBook Pro (mid '09)

    EDIT: this post got removed the first time for not being constructive enough. I've now edited the post.
    This is going to be a lengthy post, so bear with me.
    2 months ago, I suddenly noticed my MacBook Pro (medio 2009, 15", 4GB RAM, GeForce 9400M) heating up a lot harder than usual. I'm familiar with the heating issues these laptops have, but this wasn't normal. Looking at iStat Pro, I saw my fans almost taking off like an airplane at 5700 rpm, while watching only a livestream on my browser. I know Shockwave Flash takes up quite a chunk of your CPU, but I had never encountered this problem beforehand.
    The biggest problem wasn't just the heat or the fans, but the fact that my computer also started reacting rather slowly. Sometimes I'd even get beachballed, or the whole browser stopped responding for half a minute...
    So I tried to see if gaming was still an option. Of course not. I had been playing League of Legends for several months without any issues. Whilst playing, I'd kick up my fans manually to about 4000 rpm, and they'd stay there throughout the whole game. Now, when I start up the game, it plays smoothly for the first 2 minutes. After the temperatures rise to a critical level, the fans start spinning up to 5700 rpm, and the whole game plays like a powerpoint presentation.
    On a sidenote: it sort of 'lags' every 1-2 seconds, and sometimes, after a long period, the game acts somewhat normal again (20 mins). This game uses wine to run, which isn't the most optimal way. So I tried playing Team Fortress 2, too. Probably even worse results! (but again noticeable 1-2 second interval lags)
    Before anyone starts screaming: "Don't use your Mac for gaming!" etc., I wish to point out that these two games had been running perfectly for the past few months/years. Something's definitely wrong.
    After looking for some solutions myself, I decided to go to an authorized Apple Service in my city. A few days later, they told me my logic board was broken, and I had to pay almost 700 euros ($ 900-1000) to replace it. So I did. I got it back, but it wasn't fixed. Brought it back in. Got it back a week later: "Your new logic board we got from Apple was already broken, but we hadn't noticed. We put a new one in it. It's fixed." Again, same problem.
    We're almost 2 months later and 700 euros poorer, still no result. I've brought it in about 6-7 times now, here's a list of what they've tried so far:
    - In total 3 new logic boards
    - New MagSafe (because they discovered it was giving too much power too my laptop)
    - Fresh re-install
    - Replaced RAM
    - Checked fans etc. (they do this by default)
    - A few tests which proved that it was repaired (but I have my doubts with these tests...)
    They told me now that it's fixed, and they basically won't look into it anymore. I must contact Apple myself, if I wasn't satisfied. The tests they performed showed no signs of heating issues. (One of the tests was playing 4 1080p movies at the same time. When I watch a 1080p movie on Youtube, my laptop is taking off like a plane) They ran a stress test all night long, showing no temperatures above 98°C. I got it up to 105°C in a few minutes according to iStat Pro.
    They advised me to install Mountain Lion, which would make the issues with "high-performance sites" go away. I haven't seen much improvement, though.
    This whole experience has been quite frustrating, especially now that I'm gonna need my laptop for University again. Isn't there anything I can do? I've paid almost 700 euros and missed my laptop for 2 months, without any results.
    I've got more information regarding the issues if needed, ask away. I'm getting desperate.
    I've been browsing around the support communites, and found that a lot of people are having issues since they upgraded to OS X Lion. Could this be the case? Should I try downgrading to Snow Leopard?
    I've also found a few topics on refreshing the cooling pasta on the heatsink. Would they have noticed any problems with this after replacing the Logic Board several times? Or should I check it myself? I'm not too keen on opening up my laptop myself...
    Nick.

    Thought of buying Parallels? Fusion?
    Might want to see if this gets moved to the MacBook Pro forum.
    I'd think Windows 8.1 is smart enough (what I use 90% time since the Dev Preview came out couple yrs ago it seems like) to find the driver.

  • Most recent software updates and issues with XP servers

    My company had issues with the June 2006 software updates to the Macs and resulting incompatibility with an NT server. I am curious if anyone knows of any issues resulting from employing the most recent software updates to Macs and any compatibility issues then arising with XP servers.
    G4 40G iPod   Mac OS X (10.4.3)   jacked up G4 533

    no answers found

  • Latest 12.1.1.4 itune updates has issues with syncing to iPhone 6 Plus

    I was one of those folks wary of upgrading to iTunes 12 at first but once I did I actually liked it. I especially liked the fact that my frequent syncing problems seemed to have gone away.
    Sadly, these problems came back with 12.1.1.4. For the life of me, the latest iTunes version would not recognize my iPhone 6 Plus or it did but when you tried to apply a sync, it lost visibility of my phone.
    In exasperation I tried to get the older version from the Apple Website but for reasons that boggle my mind, they no longer had the 64 bit version of 12.0.1. Only the 32 bit version which would not install on my 64 bit Windows 8 OS.
    I was able to find  a 64 bit version of 12.0.1 on some other site I found while googling (and this is why I have a virus checker. :-P) and re-installing that worked great. As soon as I ran it, it recognized my iPhone and I could sync like a fiend.
    Has anyone come across this issue with 12.1.1.4? I am staying pat with 12.0.1 until Apple fixes the issue.
    I know that bugs will happen in software but given the level of importance of syncing ones phone, this really is a feature that needs to be rock solid. Not only that, but the older versions of the software really need to be properly available on the Apple Web site.
    Ian

    Hello Mirochi,
    I am sorry to hear you are having these issues with your iPhone 6 Plus. If you continue to have issues with a looping Trust notification, you may want to try resetting the Lockdown folder, as outlined in the following article:
    iTunes: How to reset the Lockdown folder - Apple Support
    If you have further issues with your iPhone not being recognized in iTunes, you may find the troubleshooting steps outlined in following article helpful as well:
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
    Sincerely,
    - Brenden

  • 10.9.2 update sleep issue with NEC monitors confirmed

    After updating from Mac OS10.9.1 to 10.9.2, both my friend, who lives in another city, and I find that attempting to put our MacPros (2010, think his is a 2009 model) attached to a NEC PA 301 (mine) or PA 271 (his) series pro monitors to sleep experience a frozen screen and cursor followed about a minute later with an expected and desired sleep mode. My computer does something slightly different than his in that the background of the dock turns a golden yellow when the screen freezes. Both systems start up from sleep correctly.
    If I only use my Apple 30 inch Cinema Display, the sleep mode works as expected.
    Spent two hours with Apple Care (level one and level two) people that didn't have a clue what was going on. Called NEC and they had no explaination.
    Any thoughts of wisdom of what is going on with the sleep issue that occurred right after we put the 10.9.2 update?

    Andrew,
    This is not an AppleCare issue, it is an Apple bug that you didn't want and  will be addressed by AppleCare representatives. Your are helping out the communnity.  If they don't believe you, refer them to this discussion. They never tell you about the 90 day software exception clause for free techsupport when one updates to a major MacOS change. I found that sending in a known bug where many people are experiencing it through AppleCare where they end up uploading your OS data to their engineers gets more attention than going to Apple.com/feedback. The more people who report it, the quicker it gets addressed.
    As far as going back to 10.9.1, didn't you do a back-up before you did an Apple "fix" that you can go back to? My problem is that every day my calendar, documents, email, etc change a lot so I am reluctant to go back to my back-up which I hate to say is only on TimeMachine now. My other backups (mirror copies) occur nightly and I didn't notice this bug till a day later.
    You pay good money for only quality equipment so a wierd bug like this should not occur on a little update.
    I have reported this to Apple and NEC but need others to light a fire under those in charge to make a change and not have us wait for one or two updates later.
    If you want to request NEC to jump in to getting this fixed, send a message to the NEC monitor product manager (Art Marshall): [email protected]

  • System update configuration issue with local repository related to machine type

    Hi,
     Sorry if the issue has been posted earlier, i tried searching but cudnt find relevant post. Here is my issue:
     My machine is Thinkpad R52. Type as printed on label is: 1858-CLG 
     While adding machine type in update retriever, I added machine type as 1858 (as it doesnt accept 1858CLG). After connecting to the support site, it downloaded all required updates onto a local(shared) repository.
    I installed system update, configured it to pickup update from local (network) repository in the registry.
    Now when I launch system update, it determines my machine type as 1858CLG & it connects to local repository only to display message as "No updates were found for this machine type"
    Though I cud see updates if I directly connect to help center.
    I think the problem is with machine type identification, not sure though.
    Please advice on what I'm doing wrong. Is it with update retriever configuration or system update configuration.
    Thanks much,

    Solution for me was to change status of packages from "Test" to "Active" using Update Retriever.
     Since this is not documented in Best Practices (but is stated in chapter 5 - modify settings) I spent several hours figuring it out..
    -brian

  • CS5 update date issue with CS4 Student Licensing version

    Before downloading the Flash Pro CS5 update, from Adobe's web-site, I called Adobe and asked this question, " Will the Flash Pro CS5 upgrade work with my Student Licensing version?"  The answer I received (after being put on hold), was "Yes, the CS5 upgrade will work with my version of CS4."
    However...after paying for and downloading the Flash Pro CS5, I am finding that it is not working. The serial number asked for, from my version of CS4, comes up as being not valid.
    Any suggestions as to resolving this issue would be appreciated!
    Thanks!
    ~BG

    There are no restrictions against you using your student-licensed version of CS4 (either any of the suites or individual programs) for commercial work other than that you may not sell or otherwise transfer your license to anyone else.
              - Dov

  • Update causes issue with bluetooth

    I just upgraded my S4 with the "update_SCH-I545_MI1_to_MJ7" patch and now bluetooth audio will not work properly. I have several bluetooth headphones and speakers and the issue affects all of them. I can connect and play one song if I start the song from the S4 and not through bluetooth controls. However after one song it stops working. I have to disconnect and reconnect to play a second song and then it breaks after that.
    Obviously there is some bugs in this latest upgrade. Is this a known issue and if so when is a fix anticipated?

        schreib1620, let's get rid of these bugs. Have you downloaded 3rd party applications to your device? Some application software can affect the performance of your device soon after a software update. I recommend that you uninstall any unwanted applcation, power your device off/on to soft reset it, and test the bluetooth feature again. Keep us posted.
    Lasina_VZW
    Follow us on Twitter @VZWSupport

  • Dynamic DNS updates and issues with re-imaged / replaced machines with the same computer name

    Our AD team gets asked frequently to delete bad DNS entries because a computer was replaced or VDI was re-created, and when it was joined to the domain it had the same computer name but different SID, so the DNS entry for that computer can no longer be updated
    to a new IP address because the new computer doesn't have rights to update that object in DNS.
    I recently saw a resolution to this was to set the security for DNS to allow updates from "Domain Computers" as described in the KB below.
    http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2005210
    Has anyone done this?  Any negative implications from this?
    Thanks

    Granting all domain computers write access to all records in the dns zone does solve the problem. On the negative side, DNS security is reduced significantly. For example, any user with admin rights locally on his/her computer will be able to sabotage
    services in your domain by deleting or changing host records of domain controllers, servers or other client computers. 
    A more secure solution in this case will be configuring DHCP servers to update DNS on behalf of the client and granting DHCP servers appropriate access to DNS zone. Take a look at
    Configuring Secure Dynamic Update for more info.
    Gleb.

  • ITunes 11.4 update cause issue with AppleUSBEthernetHost.kext

    Along with many others iMac users, the iTunes 11.4 update cause a window that informs that the system extension "/System/Library/Extensions/AppleUSBEthernetHost.kext" was installed improperly and cannot be used.

    Am on Snow Leopard and downloaded and installed the update to ITUNES yesterday - Itunes itself installed okay - but I did get the same system extension cannot be used.
    I don't have any ethernet devices - so I checked the System/Library folder and the date on the file Is July 13, 2009. 
    My IPOD (probably now classic because of age) synced okay through USB port, and everything is working fine.    As the update was to allow more devices to sync with ITUNES it may be the error message is not correct one.
    Seriously - Apple needs to get out of Silicon valley - the message if correct is for techies - not for users who just want the software to update without problems.    Lately Apple is preaching to their own choir.
    I did send feedback through Itunes to Apple - -- If you are experiencing crashes after this update make sure you send the crash report to apple explaining that it is happening after this install  -- also call or schedule a call with apple support --

  • After 10.4.3 update, printing issues

    After installation of Tiger, text drops out of certain Pages files when printing. When this first occurred, I went to the Epson website and downloaded installed the various patches and driver updates for my RX-620 all in one. The problem remained the same. When I see the print preview or when I save as PDF the text appears just fine; upon printing, the text is gone.
    This is happening on my letterhead, which I regularly printed without a hitch for many months before Tiger.
    Any ideas?
    Thanks.
    eMac G4   Mac OS X (10.4.3)   Pages 1.0.2, Epson RX-620
    eMac G4
    eMac G4   Mac OS X (10.3.9)  

    This may or may not have been a Pages or 10.4.3 problem. I I expect that it was some inadvertend error on my part, though I can't recall how it occured. I have a 'fitted text' (if that's the correct nomenclatue) box that was over-filled with unseen text. WYSIWYG showed it, but the spill over somehow knocked it off the sheet when printing. I resized the text block, deleted the unseen text and all is well again.
    Perhaps this question should be deleted.
    Thanks

  • After upgrading to NW 7.01, issue with height/width using %

    We upgraded our backend xRPM ABAP Stack to Netweaver 7.01 from 7.0.
    Now, our Adobe forms (ADS sits on a java Netweaver 7.0 server) are not displaying correctly - we launch them from ABAP Web Dynpro into a separate window. The forms appear in a small rectangle at the top of the new window.
    I checked the Form UI element and notice that the height and width properties are set to 100%. I change these to 800px by 600px and it appears as specified. However, I really would like the form to resize itself based on the window and not force the size to be static
    anyone experience this issue after upgrading?

    closing issue - reference note 1266588

Maybe you are looking for