After 10.4.3 update, printing issues

After installation of Tiger, text drops out of certain Pages files when printing. When this first occurred, I went to the Epson website and downloaded installed the various patches and driver updates for my RX-620 all in one. The problem remained the same. When I see the print preview or when I save as PDF the text appears just fine; upon printing, the text is gone.
This is happening on my letterhead, which I regularly printed without a hitch for many months before Tiger.
Any ideas?
Thanks.
eMac G4   Mac OS X (10.4.3)   Pages 1.0.2, Epson RX-620
eMac G4
eMac G4   Mac OS X (10.3.9)  

This may or may not have been a Pages or 10.4.3 problem. I I expect that it was some inadvertend error on my part, though I can't recall how it occured. I have a 'fitted text' (if that's the correct nomenclatue) box that was over-filled with unseen text. WYSIWYG showed it, but the spill over somehow knocked it off the sheet when printing. I resized the text block, deleted the unseen text and all is well again.
Perhaps this question should be deleted.
Thanks

Similar Messages

  • Imovie 11 failing to start after 10.6.5 update (same issue with iphoto)

    Hi,
    My imovie 11 is now failing to start after 10.6.5 update, I reinstalled ilife and it's still failing.
    Same issue for iphoto .
    Help
    Benoit

    help help help. imovie 11 works fine until i populate iphoto with any photos what so ever then it just fails to kick off after looking for new video from iphoto. works fine again when i delete the iphoto libary but i don,t want to do this each time i want to use imovie.....very disapointed

  • After 4.1.2 update bad issues with gs3

    I was prompted to run the new 4.1.2 update and did so. All seemed to work ok at first until I tired to load a picture into a text message. The phone would keep locking up and forcing me to restart my device. Upon further review, my gallery tab has completely changed once clicked (which is ok, no big deal) but it no longer works. Every single time i try to load up my gallery tab, my phone freezes and shuts down. I thought i had gotten a virus so i changed every password i could while i did a hard/full reset on my phone. I went thru the initial start up just as if i had boughten the phone new again and guess what, same problems but only worse. I took the micro sd card out of my phone and plugged it into my desk top and it force closes every single time and it keeps telling me that my micro sd card is corrupt now. I am absolutely furious that this is going on, I have a 9-month old child and take a ton of pictures, all of which are gone now. All of my music too. So as it appears right now, not only is my phone so glitchy now that it is all but unusable (no longer holds phone calls for more then 30seconds or WIFI connection is toast on the phone as well and the phone gets SUPER hot). My wife has an Iphone4 and she never drops a call or wifi and our phones can be side by side. I have lived in my current house over a year and never had issues until my phone updated 2 nights ago. So now i have a ruined 32gb micro sd card, and a phone that is basically a paper weight (not a good one either, may burn my house down as hot as it gets) Battery life is down to about 4hours max because the phone has SO many perment apps that it will not let me shut off. I really need help with this 4.1.2 update before my wife and I leave verizon. Have had a great phone until this update, now its junk, it has wiped out a lot of memories from my 9month old that i will never get back. someone please help me, for the sake of everyone, you dont want my wife and i to show up to the store this livid that our $700 phone is now useless.

    Doing the master reset has helped my phone out a bunch. It appears to be working properly at this time. I did however have to erase and reformat my microsd card which means I lost all of my photos and vids. My backup assistant says it is running and updateing but it however hasnt backed up a pic or vid since christmas (I can tell by the photos and remember when taken). None of my newer photos (since Christmas 2012 until now) were backed up. Nothing I can do about it now, they are gone which sucks, I have my first child (10 months old now) whose photos are all gone. That hurts pretty badly when my phone was working just fine (the update ran over night in my sleep). I woke up to see that my phone had updated, I was excited until I tried to use my gallery and realized my card was corrupted. I took the card out of my phone, plugged it into my computer and my computer even froze trying to load the pictures on it (my computer is/was brand new in march so its not like its an old clunker). The only issue I am still seeming to have is the fact that my phone is still getting really hot. It is not as hot as it was before the master reset but it is still hotter then it was prior to 6/30/13 when the update first ran. It seems like there is a process or feature that is always on that is making it over heat.

  • After Effects Red Epic updating preview issues

    Ok I downloaded "Red Epic Importer" for AE CS 5.5  (10.0.2.4) running on a HP Z800 with 22 gig of ram.
    1) I followed the 'Read me" file for AE of course I backed up  'ImporterRED.prm" and "ImporterREDServer.exe"
    2) And I loaded the new After effects cs 5.5 Red preview files
    3) When I re-start AE I get:
    'After effects warning: The following plugins have failed to load.
    Please reinstall these plugins:
    C:\program files\adobe\abobe aftereffects cs5\support files/(media core plug-ins\common\importer Red.prm"
    3) I double checked and yes I only have one copy of each file.

    You are using After Effects 10.0.2.4? That is After Effects CS5, not After Effects CS5.5.
    The RED Epic importer is for After Effects CS5.5. It will not work with After Effects CS5.

  • Printing after 3.6.6 update results in unresponsive script

    chrome://global/content/printUtils.js:48 after 3.6.6 update printing hangs with unresponsive script: chrome://global/content/printUtils.js:48.
    how to I back up to 3.6.5 until this is fixed?
    == Crash ID(s) ==
    chrome://global/content/printUtils.js:48

    Meu sistema é windows vista starter e estou tendo o mesmo erro de script.
    Quando peço para imprimir alguma pagina, demora muito tempo e aparece a mensagem:
    "UM script desta pagina pode estar em execuçao ou parado de responder.
    Você pode interrompê-lo agora ou continuar para verificar se ele termina a execuçao.
    chrome://global/content/printUtils.js:48"
    Nao entendi muito bem como posso solucionar o problema...
    tenho que voltar a uma versao anterior do firefox?????

  • Color (onscreen/print) issues after update to 10.4.9

    I am on the hunt for any new information - I haven't found it yet. I am convinced that one printer profile has gone haywire after the OSX 10.4.9 update. I can no longer use it accurately to onscreen proof nor application manage print in Aperture. The other printer profiles seem to be working. Using PSE4 I get the same preview and print results - major yellow/orange colorcast. My other two printers are working ok.
    I understand proofing may/will present a shift in lightness, contrast, etc. and you can create an Aperture version to make adjustments for that profile. But I am experiencing a major shift that is difficult to adjust in the overall image.
    Has anyone experienced "all of a sudden" icc profile / onscreen proofing / printer issues after the update (FYI ColorSync was updated in that)? I have tried just about everything except un/reinstalling Aperture.

    Did you find out anything about this? I'm having exactly the same problems with Aperture and 10.4.9. Onscreen proofing is completely useless for all profiles supplied by HP (I have a B9180 printer). It might of course be an issue with these particular profiles, but odd thing is that it's only the screen rendering that looks wrong (yellow or reddish cast) while the prints looks just great.

  • HP Printer issue after installing Mountain Lion

    Hi, a few days ago I posted the following question regarding a printer issue and so far I have not been able to fix the problem.  Here's the original question and I will  continue the explanation after this....
    Hi, I am a fairly new iMac owner and I am really happy with my apple, however I have an issue with my printer and I kind a "blame" Montain Lion for it.  I have been using this HP Laserjet P2015 dn printer for a long time, initially with Windows and now with iMac.  The first year approximately there was no problem at all to print and the transition from Windows to Mac with the printer had no difficulties at all.  It was connected wirelessly via router.  After downloading Montain Lion I notice the printer intermittently lost connectivity.  The only way to print was turn off and turn on and it will print fine until the next time.  Now out of the blue it's doing the same thing so frequently I can't print a complete document at all.  It starts, and finish without printing the entire document or not connect at all.  I have tried everything, including a static IP address for the printer, connect the printer to the computer via USB, downloading all the printer updates from HP and nothing seems to work.  Just now, I did it again (for 100 times so far), delete the printer, reinstall and it's doing the same thing.  It connects fine (either via IP or USB) and it last connected only for a minute or two.  That's it.  It's a shame, because I like the printer.  The printing quality is great and to add more pain, I recently got a new ink cartridge ($100.00) capable of printing 3000 pages.  It has 70% of ink still.  Any computer sabby person out there has any ideas for me? Like I said, I've done everything.... inluding,
    1.  Remove the printer
    2.  Update the drivers
    3.  Assign a static IP address to the printer
    4.  Connect via USB
    5.  Disconnect the  printer for a while and restart the whole process again
    6.  Did a "cold start" to the printer
    I don't know what to do, and I don't want to spend more $$$$$ on a new printer.  Is Montain Lion to be blame for?  Please advise me.
    Any help will be greatly appreciated.
    At this point I do have the printer connected only via USB, prints one page (perfectly) and then goes offline.  Before installing Mountain Lion I did use the printer with my Mac for almost a year with no issues at all.  I even downloaded Mountain Lion again thinking of any flaws during initial installation.  I've done all the updates, drivers, uninstall, re install, repair disk permission, static ip address....you name it... I've done it all and nothing seems to work.  What makes no sense to me is that prints so great only one page and then is gone.... I would be happy to know the printer is dead and go get a new one but in my mind if it prints ok one page it still works.  I don't want to have a new printer and find out it does the same thing.  I can't keep myself away from blaming Mountain Lion.  IS THERE ANY WAY TO REMOVE MOUNTAIN LION WITHOUT THE RISK OF DAMAGING THE COMPUTER????  PERHAPS GOING BACK WILL PROVE ME MOUNTAIN LION IS THE CULPRIT.  Just saying... I am totally frustrated.  I guess the next step is to get a baseball bat and fix the printer once and for all.
    Any help will be greatly appreciated.

    Any fix for this? I have the same problem after upgrade.  It's off by many seconds.  Thank you.

  • Epson R2400: Printing Issue: Dark printing after 10.7?

    This question goes out to all of the Epson R2400 printer owners whom, if you're like me and have had one for a while, seem to have printing issues after every little change in the OS:
    In Brief: Printing to the Epson R2400 via USB direct from iMac was printing well; outputing from InDesign, PhotoShop, and Acrobat Pro (all are CS5). I am not 100% sure because this is not a printer that I use daily, but I believe that I am having these printing issues after upgrading to 10.7.2 from 10.7.1.
    The issue is that an output is very dark overall, or (after tweaking settings) will have a dramatic color shift to heavy magenta/black. In general, my traditional printer settings no longer produce correct outputs.
    Anyone that has any suggestions or similar issues, I would like to hear about it.
    Notes:
    1. Yes, I completed all of the tradional voodoo magic: I cleared the printer caches, removed the printer, setup a new printer, updated the drivers via Apple software update, then once that didn't work, updated the drivers from Epson - even reverting to the older v6.5 drivers. I'm now back to the v8 drivers from the Apple software update.
    2. My printing tests are being conducted using a standard color test file that I've used to calibrate color on this Epson R2400 for years. I generally know that when this file doesn't print correctly something is afoot.
    3. My first attempt at correction was simply checking head alignment and completing a general cleaning of the heads. Didn't help.
    4. General question: Does anyone know of a compatible printer manufacturer of similar quality of output that actually cares about Mac users? Epson just never seems to really care about keeping their Apple drivers up to date or making sure that they work properly. Humble opinion.

    Ok. I believe that it all comes down to the use of a third-party ink.
    I didn't realize that there was a switch to a "refill" ink (to save money it appears) on the light-light-black and magenta. Switching back to Epson ink cleared the matter up.
    I guess sometimes it's the simple things that elude us...

  • Printing doesn't work after 10.1.3 update...

    We did a deployment with System Center 2010 and the majority of our workers cannot print from the reader.
    The solution for now is deleting their profile. As you might imagine it's not a great solution.
    We didn't had any issues with the 10.1.2 but now we do... you say the printing issue is fixed but for us the printing issue just started after 10.1.3.
    Anyone found out which file \ configuration \ registry key is making this happen? We tried deleting the adobe reader folders inside the user profile but didn't solve the issue.
    Thanks.

    Any update to this?  I have the same issue with 10.1.4.  If I disable protected mode it works.
    Also other users on the same machine can print the same PDF with protected mode on.

  • After last OSX update print is smaller on all of my toolbars

    How can I make the print on my toolbars larger.  After I did an update all toolbars in my programs and Safari are a bit too small for me.

    I agree. No warning that the update would cause these problems. All my pages documents are gone with no warning that the update would affect pages. Now I get possible fix, but have to update imac to Yosemite - a bit afraid to see what else will happen!! Been holding off on that because of issues people have had there too.
    Not happy with Apple at this point - have been Mac person for years, but some of these newer updates and changes in itunes and icloud and the way the various devices get affected, has not been good!

  • 6510 all in one photosmart printer - not printing black and/or not at all after 7/22/15 update....

    Printer not printing in black at all, poor color print since 7/22/15. I have downloaded drivers and software, hard reset the printer (power cord out and unplugged then plugged all back in), read all the forums, watched youtube videos, called friends, googled answers, bought new ink (waste of money), cleaned print head multiple times, did every step on every forum post to no avail...  Bought a new printer but really would rather return it and get my money back after getting this printer up and running again- why because I think the problem is due to HP and the new update released 7/22/15! I'm very upset, I have spent countless hours attempting to fix this printer (which I really do love up until now).  I have lost credit on school assignments due to printing issues, wasted money on ink (that is really expensive) and wasted the ink trying to fix it running test page after test page.  I feel like this is not fair to the consumer and I am very upset.  I am ready to throw this thing in the street and smash it to pieces with a baseball bat at this point.  I really would rather fix it but apparently this is the only way to contact someone.  I have had this printer for 3 years and do not think I need to replace it or spend money to call someone from HP to fix it nor do I feel like I need to have it "serviced", nor do I wish to waste any futher time or money on the expensive ink this printer requires. 

    Hi there ,
    I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact.
    Additionally, keep in mind not to publicly post serial numbers and case details.
    If you are unfamiliar with how the Forum's private message capability works, this post has instructions
    Regards,

  • Iphone 5 issues after IOS 8.2 update: my husband's phone and my phone get the same phone calls ONLY when we are home.  Any suggestions on where to look to fix this?

    Iphone 5 issues after IOS 8.2 update: all the iphones in the house receive the same phone calls ONLY while we are at home.  Any ideas on how to fix this?

    That is a new "feature" described in Connect your iPhone, iPad, and iPod touch using Continuity
    You can turn it off by going to Settings > FaceTime and changing "iPhone Cellular Calls" to off

  • IPad2 Issues after iOS 8.1 update

    iPad2 64g wifi + cellular -   very slow and non-responsive since iOS 8.1 update.  nonstandard Apps seem to be working fine.. it’s the standard item like photos and safari that don't  respond. 
    photos -  (which I use daily to show clients examples)  will freeze and kick me out back to the home page when trying to do anything from open a photo for viewing to trying to delete a photo. Edit.. forget it.   better off using an alternate app to edit a photo as it locks up and crashes every time.   I really need to be able to view the photos  on my iPad2
    safari -   good luck using any hyper link…. It doesn’t respond.   Even at Apple’s website.   Sometimes it crashes but most of the time it just ignores me like I haven’t touched the screen
    Overall - the touch screen is glitchy since the iOS 8.1 update.  It was slow after the iOS 8.0 update  but has become almost unusable after the 8.1 update.
    I cannot afford to purchase a new iPad.  And I really need to find a way to make this one work.
    I did read about how to restore to an older iOS version.   The only problems are all of my laptop is Windows based and the instructions assumed you had a Mac.   I did a backup to iTunes prior to the 8.0 update but I have also done backups since.   So I am not sure I have a “clean” iOS 7 backup.
    Any ideas would be appreciated   Thank you in advance for your help
      Deborah

    zooga wrote:
    safari -   good luck using any hyper link…. It doesn’t respond.   Even at Apple’s website.   Sometimes it crashes but most of the time it just ignores me like I haven’t touched the screen
    For the touch issues in Safari, does scrolling or zooming the page before you try to tap a link make it work again?  I've read a few posts that this may be a workaround for that issue.

  • Epson printer driver no longer working after 10.4.11 update

    It seems that my original Epson driver for my Stylus Photo 750 is no longer working after my latest Tiger update. The system does recognise it but shows an exclamation mark behind it and refuses to print with it (the document stays in the waiting line forever). Reinstalling as well as repairing permissions didn´t help. Fortunately the Gimp Epson driver is still working but I have no access to my coloursync profiles with this driver.
    I know that many printer drivers need to be rewritten for Leopard (one of the reasons I didn´t update yet) but it is not understandable why problems happen with a Tiger update.
    Does anyone know a workaround?
    Thanks very much
    Wolfgang

    I just discovered a similar problem. I have an old Epson SC3000 and under 10.4.11 my computer doesn't communicate with the printer. It's an AppleTalk printer, connected via Ethernet. I tried bypassing my network switch and connected it directly to the Mac-- no go. I then rebooted into 10.3.9 and printing works fine.
    I downloaded the driver from Epson and installed it in 10.4.11. When I try to add the printer in the Printer Setup Utility, the machine just hangs-- can't force quit the utility and eventually the Finder even stops responding. It takes a hard reboot to clear up.
    I can't say whether or not printing worked in earlier versions of 10.4. I haven't been using 10.4 for very long, and I rarely use the SC3000.

  • Not Able To Print w/ Lexmark X2600 After Recent Airport Firmware Update

    Hi,
    So, after the recent firmware update for the Airport Extreme (802.11n), I can no longer print to my printer share. The device is recognized in Bonjour, and I use the correct driver as I did before, but when I send something to the printer, it just reads:
    "Connecting to MyNetwork.local...
    There is a problem communicating with the printer. Make sure the printer is powered on and connected to the computer. Delete or hold the job and try again."
    Now, if I connect the printer directly to my computer and set it up with the same drivers over USB, it works just fine. Can I get some support on this?

    Hi,
    Have you tried this?
    To change the printer’s network settings:
    1. Open the printer's embedded Web server.
    2. Click the Networking tab. For wireless settings, click Wireless. For IP settings, click IP
    Configuration.
    3. Change the printer's settings to match the settings of the network, then click Finish.
    4. Close the printer's EWS, then disconnect the Ethernet cable from the printer.
    5. The control panel lights will cycle.
    The previous procedure is from the Wireless Printer User Guide for your printer.
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

Maybe you are looking for