After error message has been displayed , unable to check multiple selction.
Hi experts ,
I have developed an interface tosend data to thrid party tool. But there is a single issues with it.
Whileproviding inputs at selection screen the selection-screen fields are not validated properly.
Could somebody please correct me on this :-
I have a validation check for a select-option with NO Intervals.
Any incorrect value in the Select option then an error message displayed . Now if there are multiple values in the Selct-option multiple selection then also the error popos up showing the wrong entires . But when i try to change again i.e click on multiple selection then it doesnot allow the user to enter and correct those entries.
Could you please let me know the best posible way to check teh above scenario ?
Thanks
Kylietisha
Hi,
try to put our validation logic in the AT-SELETION SCREEN event so that it will allow you to crrect the values in the selection screen option after displaying of the error message.
to check the mutiple value validations, try to get the entries from the validation table into an iternal table. if internal table contain a vaue then there are some valide entres present in the given input vaues. if table is empty then display the error message.
Similar Messages
-
Can I tell at server-level if a message has been displayed in the Reading Pane in Outlook?
Hello,
Does anyone know if there are any traces at server-level (Exchange 2010) if a message has been displayed in the Reading Pane of Outlook 2010? The message would still be marked as Read in the recipient's mailbox.
Thanks,
- Alan.Hi,
If you want to know whether an email has been read by recipient, you can either request a read receipt or enable the tracking for read status for messages by using the
Set-OrganizationConfig –ReadTrackingEnabled:$True command.
A related blog for your reference.
Question: Is it possible to check if a message has been read, even when the sender forgot to check the box “Request a Read receipt for this message”?
http://blogs.technet.com/b/ilvancri/archive/2010/04/13/question-is-it-possible-to-check-if-a-message-has-been-read-even-when-the-sender-forgot-to-check-the-box-request-a-read-receipt-for-this-message.aspx
Best regards,
Belinda
Belinda Ma
TechNet Community Support -
10810 Error Message - has anyone found a fix?
This error message has been plaguing me for at least two weeks. I am forced to restart my computer every time this "10810 error message" starts, because it will not open an application. At this point, every time I turn on the computer, it occurs.
I also notice a processor background noise like I've never noticed before - like the computer is working extra hard, when it is only on standby screen saver.
Has anyone run into this issue and found a solution?See Finder Error -10810 in Snow Leopard causing problems.
-
Premiere Elements 12 does not start after error message: display driver is incompatible
After successful installation and starting Premiere Elements the following error message appears: "Uncompatible display driver identified. Update the display driver for a better and faster playback performance!" Hopefully my translation from German is helpful enough. I confirmed with OK but unfortunately Premiere Elements does not start. I checked the display driver: it is the most actual one: AMD Radeon HD 7610M. Furthermore the hardware should be OK as well: ASUStek with an Intel Core i5-2450M CPU @2.5 GHz; 6 GB RAM; 64 Bit Windows 7 Service Pack 1. What can I do?
Moonkeys25
Recap...please confirm that as of this date, the problem exists with or without the antivirus and firewall(s) disabled.
Moving forward...
If you issue was specific to the display card error that you have been getting then probable conclusions
a. the ADM Radeon H7610M driver version is not up to date
or
b. the ADM Radeon H7610 M video card/graphics card installed as is is not compatible with Premiere Elements 12 on your Windows 7 SP1 64 bit
The updated driver version and the BadDrivers.txt file deletion should have corrected the problem unless there is a gross mismatch between Premiere Elements 12 and ADM Radeon H7610M.
Did you use the link that John posted to get the auto detection of the latest driver version for the ADM card?
If we have gone as far as we can with the card and its driver version angle on this, then we can try the generalized troubleshooting drills with no guarantees, just hopes
1. Delete the Adobe Premiere Elements Prefs file and, if necessary, the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists.
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
12.0
and in the 12.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then you delete the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. You just need to make sure to have the computer's Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete path cited.
2. If "1" has no effect on the issue...uninstall, ccleaner run through time, reinstall with antivirus and firewalls turned off.
a. Control Panel/Program, select Adobe Premiere Elements 12, right click the entry and click on the Uninstall pop up. Then follow the instructions for the uninstall.
b. Download and install the free ccleaner for a computer run through to get rid of leftovers from incomplete uninstalls and installs.
https://www.piriform.com/ccleaner/download
When you are ready for this step, I will give you a step by step through the ccleaner (regular cleaning part and registry cleaning part).
c. Reinstall from your installation files or installation disc, with antivirus and firewall(s) disabled.
Please review above and then let me know if I have interpreted correctly where we are in the troubleshooting. Do not start the above plan until we are in agreement on the details and hoped for results.
Thanks.
ATR -
I installed Firefox4 and immediately had a problem with the addons manager page not displaying properly ( all the right hand side of the page was missing). I was advised to try a new profile which fixed it but now when I go to the page "Check your plugins for updates it keeps showing this message "We've encountered an error. Please try your request again later" but this message has been coming up for days now..
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows) -
When I attmpt to synch my Iphone I get the following error message. "Itunes was unable to load data class informationfrom synch services. Reconnect or try again later. This started after I uddated to the latest version of Itunes. What should I do?
My iPods are working fine...this is just on our iPhone 3GSs....friend said his iPhone 4 was working fine with upgrade.
Tried: the winsock reset, uninstall/re-install of iTunes, shut the firewall down. Even called Apple...and after 2 hours of being told that "I'm savvy and have done everything they'd recommend" still with no fix...
Still: Takes over 2 minutes (not hooked up to phone) to open Edit-Preferences-Device...and can't find any backups?!?! Takes over 2 minutes to even open the phone to change spps, musice, books, etc....but won't let me do anything with contacts...wonder if this is what that error message is about (because I don't actually sync to an email program, I've just kept it all on the phone - mistake).
**banging head on table** -
After updated to iTunes 11.1.4 for windows vista , I was unable to open iTunes and it keep error message. My iphone unable to USB hotspot the internet to computer. Pls Help
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
I have reset both my torch and playbook back to original only thing that I kept was my contact. And still problems I am a few min away from leave my loved blackberry and going android !! Or heaven help us Phone
Issues 1) playbook wont connect to desktop manager anymore
2) Play book has 2 calendar icons with two different settings on them ??? I have one that is currently working with my yahoo email and calendar account.
3) my Phone when connected to desk top software shows the calendar as read only
4) Unable to update my phone says During an update of the applications on the BlackBerry® smartphone an error message may be displayed "BlackBerry Desktop Software failed to validate your BlackBerry device update - Aborting install due to validation failure. Some packages contained unsatisfactory dependencies."
I just want my email and Calendars to work I am tried of spending nights trying to get these deices working !!!
someone please help me. !!
I know you are going to ask I have updated everything last time and it is all as update as it can get.
As for now as I wait I am going to wipe my phone again and just set everything up again !! If I have to even my contacts AHHHH Help I am starting to think crazy thoughtsDid you try to eboot the your PC or laptop where your device is connected ?
I experienced this with my windows laptop, after a failed to do an update, I restart the laptop and my Torch, then retried, and it's worked -
Error message - The product is unable to calibrate
I have a problem with all-in-one HP MFP M 425dw.
It has a problem with scanning and photocopying. Printing is OK.
First time after turning up device and installing it I done a first test copy (before connecting to computer in any way) and I got a copy with straight lines across the page.I also got message: "The product is unable to calibrate.
Close the lid and remove paper from the document feeder or flatbad"
With scanning was the same problem, after scanning it puts out a page with straight lines in colour -colour scanning was turned on.I uploaded a photo of scanned page and it is the same with photocopying (only in black since it is black-and-white printer. Straight scan lines
On some forum I found out some manual considering calibration - I uploaded instructions in jpg.Calibration page1 Calibration page2
After doing calibration by that manual I got the same mesage again:'The product is unable to calibrate.
Close the lid and remove paper from the document feeder or flatbad.'
However after waiting for some time this did solve my problem, it started to copy and scan properly. The problem is that every time th device is restarted it has a poroble with scanning and photocopying, so I have to do calibration process again.
Because every time device gets turned off on power button or there is power outage, calibration problem appears again.
Now I am not sure is there a problem with just this device like a factory error or not.
Because I have two others HP M425 and they never did have this problem. Actually on one other device after restarting it, sometimes there's a same error message
" The product is unable to calibrate...."
But he copies and scans ok.I am able to get to the Ashford University login display with no difficulties with both Firefox and Safari. Obviously without a student password I cannot go any further. If you can do the same, then clearly the problem is at the other end. If that is the same case with you, then there is no advice that I can give you but to stir the pot as best you can.
Ciao. -
Delivery gets created in VL01N - Return scenario even after error message
Hi,
I am having following issue explained in details in steps -
We have a service return scenario and following steps have been followed in ECC.
Material code used in this case is batch managed material.
Step 1 u2013
We have created a sales order(VA01) with document type ZRE(Itu2019s a kind of return order). This return order actually coming from CRM.
Step 2 u2013
We are creating delivery using VL01N transaction for return order.
Step 3 u2013
We avoid giving batch number in VL01N and try to save the delivery document. System prompt error saying u201CEnter batchu201D. Subsequently we press return keys to cancel the error message and try to come out of the transaction.
Step 4 u2013
Instead inputting batch number, we try come out of the document creation step.
Step 5 u2013
We go to document flow button of sales order and we could see the delivery created although we came out of the delivery creation process after the error message, without saving the document.
Also note instead of coming out of the document creation, if we again try to save the document, system throws update termination with a reason saying u201CError info... ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPRECu201D, which is quite obvious as system has already created the delivery and we are trying to create / save the document once again in VL01N
We are in dilemma now.
What is the cause of this abnormal behaviour? I don't know.
Any one experienced this, feedback is appreciated,
Regards,
DipakHi,
The SAPSQL_ARRAY_INSERT_DUPREC error is not bothering me much.
My worry is once "Enter batch" error message comes, I am not interested to create the delivery any more.
So I come out of the transaction by pressing return key.
Now when I press return key, system gives me the delivery number, this should not be the case as message given was an error message.
If I go to the SE16N, I could see the delivery number in database.
Also system prompts me to save the delivery which I am not interested to do, just I want to come out after error message.
What could be the reason, I don't know. Ever after error message system gives you the delivery.
Which is very strange.
Any input is apprecited,
Regards,
Dipak -
Cannot create a session after the response has been committed (Tomcat 6)
I'm getting a rather annoying error when I try to open a pretty basic JSP page.
I'm rather new to the whole JSP scene, so I'm following the example found on pages 287 and onwards in "JSF in Action - Manning" in case anyone wanted to check my code against the source.
I've searched for about 4 hours now, coming back to this site a couple of times, once reading about writeouts and stuff. But I'm not really sure this is the issue in this case and if it is, where exactly the problem lies.
I've already fixed a number of errors I got (jtsl.jar and standard.jar missing etc...) but this particular problem is driving me (and my co-workers for that matter :-) ) up the wall.
Anyone willing to help me out here?
Error:
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Cannot create a session after the response has been committed
javax.faces.webapp.FacesServlet.service(FacesServlet.java:152)
root cause
java.lang.IllegalStateException: Cannot create a session after the response has been committed
org.apache.catalina.connector.Request.doGetSession(Request.java:2301)
org.apache.catalina.connector.Request.getSession(Request.java:2075)
org.apache.catalina.connector.RequestFacade.getSession(RequestFacade.java:833)
org.apache.myfaces.context.servlet.SessionMap.setAttribute(SessionMap.java:53)
org.apache.myfaces.util.AbstractAttributeMap.put(AbstractAttributeMap.java:103)
org.apache.myfaces.util.AbstractAttributeMap.put(AbstractAttributeMap.java:35)
org.apache.myfaces.application.jsp.JspStateManagerImpl.saveSerializedViewInServletSession(JspStateManagerImpl.java:523)
org.apache.myfaces.application.jsp.JspStateManagerImpl.saveSerializedView(JspStateManagerImpl.java:358)
javax.faces.application.StateManager.saveView(StateManager.java:47)
org.apache.myfaces.application.jsp.JspViewHandlerImpl$StateMarkerAwareWriter.flushToWriter(JspViewHandlerImpl.java:387)
org.apache.myfaces.application.jsp.JspViewHandlerImpl.renderView(JspViewHandlerImpl.java:322)
org.apache.myfaces.lifecycle.RenderResponseExecutor.execute(RenderResponseExecutor.java:41)
org.apache.myfaces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:132)
javax.faces.webapp.FacesServlet.service(FacesServlet.java:138)
Source Code of login.jsp:
<%@ page language="java" contentType="text/html; charset=ISO-8859-1"
pageEncoding="ISO-8859-1"%>
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
<f:view>
<html>
<head>
<title>
<h:outputText value="ProjectTrack"/>
</title>
</head>
<body>
<table>
<tr>
<td>
<h:graphicImage url="/images/logo Skillteam.jpg"
alt="Welcome to ProjectTrack"
title="Welcome to ProjectTrack"
width="435" height="120"/>
</td>
<td>
<font face="Arial, sans-serif"
size="6">
<h:outputText value="ProjectTrack"/>
</font>
</td>
</tr>
http://forum.java.sun.com/post!default.jspa?forumID=45#
Click for bold </table>
</body>
</html>
</f:view>
web.xml & faces-config
<?xml version="1.0" encoding="UTF-8"?>
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns="http://java.sun.com/xml/ns/javaee"
xmlns:web="http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" id="WebApp_ID" version="2.5">
<display-name>ProjectTrack</display-name>
<welcome-file-list>
<welcome-file>faces/login.jsp</welcome-file>
<welcome-file>index.html</welcome-file>
</welcome-file-list>
<servlet>
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>/faces/*</url-pattern>
</servlet-mapping>
</web-app>
<?xml version="1.0"?>
<!DOCTYPE faces-config PUBLIC
"-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.0//EN"
"http://java.sun.com/dtd/web-facesconfig_1_0.dtd">
<faces-config>
<navigation-rule>
<from-view-id>/login.jsp</from-view-id>
<navigation-case>
<from-outcome>success</from-outcome>
<to-view-id>/inbox.jsp</to-view-id>
</navigation-case>
<navigation-case>
<from-outcome>failure</from-outcome>
<to-view-id>/login.jsp</to-view-id>
</navigation-case>
</navigation-rule>
</faces-config>Setup:
Eclipse Europe 3.3.0
Tomcat 6.0.13
MyFaces 1.2
JRE 1.6.0_02When searching for this error, this was the first page google gave me. I found the answer and just in case anyone else stumbles in here with the same question I thought I'd share my findings.
Unfortunately, if your problem is the same as mine, you're going to feel pretty silly. I was navigating to the wrong page. If MyFaces(when running tomcat) tries to resolve to a page that doesn't exist, the error given above is what happens.
In my case I accidentally put my .jsp page into the wrong directory and ended up banging my head against the wall for an hour figuring that out. Hope this helps someone. -
Message retry count for the message has been exhausted
Hi,
I am using 'Custom Document Over Internet' with HTTPS as transport protocol. I have set the acknowledgement mode to Sync in order to receive the synchronous response. B2B is able to post the HTTP request successfully and in turn it receives a synchronous response and a MDN message. At the initial stage, after posting the request it shows the state as 'WaitForAck' for request message and for response and MDN messages, the state is completed.
After some time when we check the state of request it is changed to 'Error' with the error message as 'Message retry count for the message has been exhausted'. We have not set the retry count and retry interval and so after retrying for 3 times with an interval of 120 minutes it is showing error state as it is not able to correlate the incoming response to the corresspoding request. We have tried the option of setting the Message id of the request in 'replyToMsgID' parameter of response header and tested the flow. But still I am facing te same issue. Please help me to resolve this issue.Hi Anuj,
The property mentioned by NandaGopal has already been added in tip.properties file. I sent the B2B logs in debug mode and tip.properties file to your mail id. Please have a look into that. The result of opatch lsinventory command is
Result:
Installed Patch List:
=====================
1) Patch 9234704 applied on Fri Jan 15 16:41:12 GMT 2010
[ Bug fixes: 8870866 9143036 ]
[ This patch overlays patches " 8703410 " ]
[ This patch needs patches " 8703410 " as prerequisites ]
2) Patch 8703410 applied on Thu Jan 07 17:56:08 GMT 2010
Unique Patch ID: 11901808
[ Bug fixes: 7652646 7497854 7664370 8708445 7661101 7007789 6352814 6802446 7665607 7641078 6496457 6013963 8330151 7305413 8619657 7460584 7529893 7458954 7020996 8393885 8210401 6329207 6740403 7126458 6511970 8783577 7379065 7230993 8704965 6774631 7198642 8309511 8392729 7661769 7605518 7479148 6733262 8349002 6736026 7322333 7242500 7239355 8746561 8344645 8451004 7645440 6747966 6369424 6737334 8339176 6774134 7046561 6412124 7210461 7506319 8630406 8235175 7258882 7184318 6453359 7456866 7673646 6043277 7457597 6769895 7193710 8239170 7668247 8404955 8612841 7261965 7132740 7485790 6518386 7305363 6852370 6433256 7673431 6764239 8360048 7501748 7379153 8281019 7498031 8216457 7046574 6875312 6754906 6656289 6417367 7658271 7556011 7000190 6979467 8594506 8691820 6852308 8475848 8518443 7600385 7211208 6732051 8524862 7461051 8263026 7609467 7379161 7672714 6353293 7157229 7594997 7211287 7034069 7563311 6822375 6640935 7359202 6769261 6919593 8601869 6029507 6974391 7139013 7518641 8605719 6817264 7501903 7496014 7576785 8666761 7130151 7322581 5523563 7680097 8508905 7241737 7660780 8480395 7660781 7191994 6924921 7672723 8432093 6800745 8703404 8540335 8507242 8608121 8217566 7481317 6639030 6200414 7529795 7354853 8475867 7376270 7303860 7016005 7678901 7368610 8992520 6881977 6016128 7033061 6397084 7672730 8703410 7709562 6449656 7045589 8508054 6491068 7378745 7643811 7435853 7615836 8707416 6447557 7379042 6940476 7670634 6950383 6764273 6962327 7478322 8546454 7157324 8871403 8862082 7184219 7672744 7164618 7672745 7230184 7576730 7590301 8746541 7261863 8327427 6769430 8295683 7526186 8298731 6414280 6139955 6646997 7692853 8233048 6794296 7457066 8552373 8225241 7706387 7204022 ]
3) Patch 4601861 applied on Fri Nov 14 04:24:08 GMT 2008
[ Bug fixes: 4601861 ] -
Hi,
for Iphone tips page "see when a message was sent " , then how do I know that the message has been read? ThanksHi Bhavesh,
Please see my replies inline:
> 1. If i remember your ealier thread correct also, I
> would suggest that you drill down in Where Did the
> Error Occur. Instead of no restriction, select
> Adapter Engine and also your Corresponding Adapter
> and then trigger the error message and check if the
> alert is triggered.
When I click on "Where did the error occur" -> "Adapter Engine", I do not have a choice of errors from the dropdown. I only see one option "*".
Is this right?
> 2. ><i>When I click on "Alert Inbox" ->
> "Subscription", I get a message "The table does not
> contain any entries". Is this correct?</i>
>
> Yes this is correct. You have defined in your alerts
> as the option as FIED RECIPIENTS. You also have
> options like Reciepients via User Role and
> Subscription Authorization in ALRTCADTDEF.
>
I see.
I've also managed to overcome this problem by selecting "Subscription Authorization" in the Alert Category Definition page, and entering SAP_XI_MONITOR as one of the roles.
After that, I am able to see a the alert category defined. By default it's already subscribed, because I'm using the same user - PISUPER.
I saw in another post that the option "Suppress Multiple Alerts of this Rule" should be left unchecked. I tried that, but I still do not see any alerts raised in ALRTDISP.
What did I miss?
Please help.
Thanks.
Ron -
Navigation to another view after error message appears
Hi,
I have a requirement to enhance a the FPM component FITE_VC_RECEIPTS Receipts for Expense Report , to display the messages according to the expense type. These messages are for itemization. If an error message appears, i need to click on
enter itemization and enter to that view,itemize that particular expense type and then the error message should disappear after itemization is done.
But presently if error message appears i am unable to navigate to the itemization view as the navigation_abort is set 'X' and also the rv_response = 'CANCEL' in FITV_FPM.
Please suggest as how to enhance the component so as to recify the error messages and navigate to the itemization view.It is bit complicated to advice without seeing your source and understanding the problem.
In webdynpro i would have done something like this
enhance in the process_event method and return ev_result - defer. (failed status is equivalent to you cancel and navigation_abort ).
You can try to enhance like this and try out changing the values for navigation_abort and rv_response. -
HT4623 my iphone froze up after error message
my iphone froze up after error message and i am now unable to restore. showing usb connections with arrow to Itunes. how do i fix this?
If by the "starting screen" you mean the Apple logo, then your phone is coming across a software issue that prevents it from finishing it's boot sequence. You will need to replace the software and firmware on the phone to get it back up and running. Doing this will also remove your data from the phone, so hopefully you have synced recently.
To put your phone into DFU recovery mode:
1. Make sure your phone is connected to a computer with iTunes on it.
2. Hold down the sleep/wake button and home button at the same time for 8 seconds.
3. Let go of the sleep/wake button and continue holding the home button.
4. If successful, the phone's display will main black and a dialogue box will appear in iTunes stating thet it detected a phone in recovery mode.
5. Click OK, then click Restore.
After that the phone should be up and running and you can sync your content back.
Maybe you are looking for
-
CUP - Issue regarding creation of New SAP ID in CUP.
System : SAP GRC 5.3 SP 12.. We have requirement where in we need to design a workflow for creation of New SAP ID. The Naming convention followed for SAP ID is FIRST LETTER of FIRST NAME and LAST NAME with maximum 8 characters. For Eg JOHN SMITH wou
-
I purchased a white macbook 2 weeks ago for my wife. Works great. Recieved a black one for me yesterday. Will not connect wirelessly to the internet. Here are the facts: Ran through setup on 1st start...stumbled and never connected to my wireless net
-
HI THERE, CAN SOMEONE PLEASE HELP ME? I HAVE BEEN TRYING TO RESTORE MY IPHONE4 FROM IOS 4.3.3 TO 5.1.1 FOR THE LAST 6 HOURS AND EVERYTHING GOES THROUGH OK UNTIL IT GETS TO THE RESTORING IPHONE SOFTWARE, IT LOADS 1/2 THEN FREEZES. IVE LEFT IT LIKE THA
-
Hi, I am using OBIEE 11.1.1.5.When you download reports in OBIEE basically we use "Export" link at the bottom to download in PDF/Excel etc., Is it possible to have right click functionality on the report and just download instead of using export o
-
After install Yosemite, Elements 10 change language to german...
After install Yosemite, Elements 10 change language from English to german. I tried to uninstall & reinstall Elements 10, but nothing change. How can I fix it? Any log or file to delete?