After update firmware cannot to search contact use chinese word

Hi all, My Q10 just update to firmware 10.2.1.537, after update I search the contact use chinese word, always show “no result”, has anyone have the same issues? Can I back to previous version of firmware? Many thanks to all.
Software version: 10.2.1.537
OS version: 10.2.1.1925
Trad. Chinese version ( Hong Kong)

Oh, my apologies then, I don't understand your issue.
Perhaps someone else will have some assistance.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

I use to be able to rotate my iPhone and change the view of an image, Web page, email, and so on, from portrait to landscape, but after update, I cannot. I can only view in portrait mode. Anybody know what's up with that?

I use to be able to rotate my iPhone and change the view of an image, Web page, email, and so on, from portrait to landscape, but after update, I cannot. I can only view in portrait mode. Anybody know what’s up with that?

You need to do the basic troubleshooting steps described in the User Guide, Appendix B.
Restart phone
Reset phone
Restore in iTunes using a backup
Restore in iTunes as new, without using a backup
If restoring as new doesn't help, there is a hardware failure in the phone that needs evaluation by Apple.

I bought my ipad3 in the philppines, after 5months of usage my ipad3 is asking for an update "ios6". I updated it in japan because im working here. After updating i cannot install or update any apps

I bought my ipad3 in the Philippines and have my settings, after 5months of usage my ipad3 is asking for an update "ios6". I updated it in japan because im working here. After updating i cannot install or update all my apps and whenever i try this statement appears "your account is not valid for use in the japanese store. You must switch to the philippine store before purchasing. What should i do? Do i need to come back to the phil store every time i update?

Before when its still ios5 i can still download and enjoy apps even here in japan, but now after updating ios6 here, its stock, itunes store no more use from me.

Hi , I use Iphone 3g and after update of Facebook i can't use it.Please help

Hi , I use Iphone 3g and after update of Facebook i can't use it.Please help

If you still have the old version on you computer, then delete the app and resync it. the new facebook is compatible with iOS4.3 or later and you cannot get beyong 4.2.1

Compass application can't running well after update firmware to 20120726

my windpad7 can't run compass application well after update firmware to Android_2.3.1_MSI_02_20120726 but it can pointing well if i turn it upside down (face down). i use the same application that running well on earlier firmware and I've try using another typical application and the result is the same,.. anyone experienced it?

on my n73 i can go to app manager and reinstall them.
if u wanna remove it, then reinstall them and uninstall.
Blackberry Bold

Sony A7 failed to turn on after updating firmware 2.00

As i mentioned, my Sony A7 failed to turn on after updating firmware 2.00. It just appear a blank screen after click the finished button on the updating app on Mac. I waited for more than an hour and there is still no thing happened.

I bought the Sony A7II a few days ago. It initially charged just fine, but today I tried to charge it using the cable with an electrical outlet as well as the USB to computer. Neither one would get the charge light to illuminate. Not feeling the love Sony. I just purchased a Flash, wrist belt, filters, etc... I'm definitely not happy. It seems this is a problem!

Some buttons without tones after updating firmware...

Hi.
After updated firmware to version 20.0.080 (5530 Xpress Music), some tones and vibrates at dialing pad (just numbers) and at Contacts (main screen) don't work any more.
All other functions work normaly just as described, but some tones and vibrating functions doest'n seem to react. I have set touch screen tones on level 2, also the vibrate on level 2. Tryed to reinstal the latest firmware again, done succesfuly, but no changes.
Should I try to restore the phone by *#7370# ???
Is anybody facing the same issue ???
br,

Hey,
I have the same problem with my phone. After the update, installing v.20.0.080 the dial tone from the keypad just dissapeared. These morons at Nokia instead of adding letters to the keypad dialer with the new firmware, they went further and removed the dial tone. Such a progressive step..

Kernel panics after updating firmware

Kernel panics began at startup after updating firmware about 2 weeks ago. Went through the KP repair routines prescribed by thexlab.com. Found no problems with the hard drive, permissions, etc. Did erase and install (with Leopard OS dvd bought from best buy) after archiving files to external HD and was able to startup normally. Updated OS to 10.5.7, along with several other items (iTunes was one of them). Put previously copied files (mostly iTunes). The computer ran successfully for a few days and then started getting KP's at startup again. Did another erase and install. Had success. Loaded iLife and Office 08 to have something to try to test the machine with. Shut down the computer and restarted successfully. I had forgotten I had not tested the RAM so downloaded Memtest. Tried to run it but the computer froze half way through the test. Did a hard shutdown, then tried to restart normally and got the KP again at startup. Here is the panic log:
Sun Jul 5 18:24:05 2009
panic(cpu 1 caller 0x001A7BED): Kernel trap at 0x00b10612, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x000000b8, CR3: 0x0134c000, CR4: 0x00000660
EAX: 0x43ec9630, EBX: 0x049cf804, ECX: 0x04e15800, EDX: 0x00000000
CR2: 0x000000b8, EBP: 0x43ec9668, ESI: 0x00000000, EDI: 0xffffffff
EFL: 0x00010246, EIP: 0x00b10612, CS: 0x00000008, DS: 0x04e10010
Error code: 0x00000000
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x43ec9408 : 0x12b0e1 (0x4555b4 0x43ec943c 0x133238 0x0)
0x43ec9458 : 0x1a7bed (0x45e568 0xb10612 0xe 0x45dd24)
0x43ec9538 : 0x19e517 (0x43ec9550 0x1 0x43ec9668 0xb10612)
0x43ec9548 : 0xb10612 (0xe 0x48 0x10 0xb40010)
0x43ec9668 : 0xb1753d (0xc1d00005 0x1000000 0x1000003 0x40)
0x43ec96c8 : 0xb0bfc0 (0x43ec9858 0x43ec9808 0x0 0xafe41c)
0x43ec9828 : 0xb00132 (0x0 0x600d600d 0x7027 0x43ec9858)
0x43ec98e8 : 0xca58de (0xc1d00005 0x1000000 0x1000003 0x40)
0x43ec9918 : 0xcae273 (0x2436f000 0x1000000 0x88100090 0x3e)
0x43ecb8a8 : 0xc92d8a (0x2436f000 0x1000000 0x15 0x2436f01c)
0x43ecb9a8 : 0xafa472 (0x2436f000 0x0 0x43ecbab2 0x80)
0x43ecba08 : 0xaf15a5 (0x48af000 0x0 0x43ecbab2 0x80)
0x43ecbb38 : 0xaf2d74 (0x48af000 0xaf6358 0x43ecbbec 0x4)
0x43ecbc08 : 0xade139 (0x48af000 0x1 0x0 0x13)
0x43ecbc68 : 0xad7940 (0x48af000 0x2407 0x43ecbd2c 0x48af000)
0x43ecbc98 : 0x40c515 (0x48af000 0x4a40130 0x4a40130 0x0)
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.NVDAResman(5.1.6)@0xaf9000->0xd25fff
dependency: com.apple.iokit.IONDRVSupport(1.5)@0xaeb000
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
com.apple.iokit.IONDRVSupport(1.5)@0xaeb000->0xaf8fff
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000->0xaeafff
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:35:55 PDT 2007; root:xnu-1228~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F42388C8)
Was able to start up in safe mode and ran memtest again, this time having success and finding no RAM problems from the single run of Memtest. Shut down and restarted successfully.
Turned the computer off for the night and just restarted it successfully about 24 hours later, and it is still running.
I presently have about 130GB of free space on my HD. I don't have any peripherals attached. The computer gets fairly warm at times but certainly not excessively.
Can anyone decipher my KP log and see if there is a fixable problem?
thanks in advance,
Pat Leopard

Had another kernel panic at startup this morning. I had the Leopard DVD in and was contemplating another erase and install, but tried to back out of it. On restart the KP happened. Here is the log:
Wed Jul 8 10:44:41 2009
panic(cpu 0 caller 0x001A7BED): Kernel trap at 0x00b10612, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x000000b8, CR3: 0x0134c000, CR4: 0x00000660
EAX: 0x2ebb1630, EBX: 0x04e20404, ECX: 0x04de7000, EDX: 0x00000000
CR2: 0x000000b8, EBP: 0x2ebb1668, ESI: 0x00000000, EDI: 0xffffffff
EFL: 0x00010246, EIP: 0x00b10612, CS: 0x00000008, DS: 0x04de0010
Error code: 0x00000000
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x2ebb1408 : 0x12b0e1 (0x4555b4 0x2ebb143c 0x133238 0x0)
0x2ebb1458 : 0x1a7bed (0x45e568 0xb10612 0xe 0x45dd24)
0x2ebb1538 : 0x19e517 (0x2ebb1550 0x1 0x2ebb1668 0xb10612)
0x2ebb1548 : 0xb10612 (0xe 0x48 0x10 0xb40010)
0x2ebb1668 : 0xb1753d (0xc1d00001 0x1000000 0x1000003 0x40)
0x2ebb16c8 : 0xb0bfc0 (0x2ebb1858 0x2ebb1808 0x0 0xafe41c)
0x2ebb1828 : 0xb00132 (0x0 0x600d600d 0x7027 0x2ebb1858)
0x2ebb18e8 : 0xca58de (0xc1d00001 0x1000000 0x1000003 0x40)
0x2ebb1918 : 0xcae273 (0x2435f000 0x1000000 0x88100090 0x3e)
0x2ebb38a8 : 0xc92d8a (0x2435f000 0x1000000 0x15 0x2435f01c)
0x2ebb39a8 : 0xafa472 (0x2435f000 0x0 0x2ebb3ab2 0x80)
0x2ebb3a08 : 0xaf15a5 (0x4837800 0x0 0x2ebb3ab2 0x80)
0x2ebb3b38 : 0xaf2d74 (0x4837800 0xaf6358 0x2ebb3bec 0x4)
0x2ebb3c08 : 0xade139 (0x4837800 0x1 0x0 0x13)
0x2ebb3c68 : 0xad7940 (0x4837800 0x2407 0x2ebb3d2c 0x4837800)
0x2ebb3c98 : 0x40c515 (0x4837800 0x4a0bc40 0x4a0bc40 0x0)
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.NVDAResman(5.1.6)@0xaf9000->0xd25fff
dependency: com.apple.iokit.IONDRVSupport(1.5)@0xaeb000
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
com.apple.iokit.IONDRVSupport(1.5)@0xaeb000->0xaf8fff
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000->0xaeafff
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:35:55 PDT 2007; root:xnu-1228~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F42388C8)
I left the computer alone for a while and when I hit the power button it came right up.
I'm going to pull RAM modules per your suggestion.
thanks,
Pat Leopard

After updating to iOS 7 the contact photos no longer appear when I receive a call. How can I get them to show again?

After updating to iOS 7 the contact photos no longer appear when I receive a call. How can I get them to show again?

I'm having the identical problem on my iPhone 4 after upgrading to IOS 7--no ability to update apps or download new apps. Here is what Apple tech support emailed to me:
I understand that you are unable to download or update applications after updating iOS7 on your iTunes. I know you must be eager to get this resolved and I will be happy to help you today.
... to help you better with this issue I would request you to please try this steps given below to resolve your issue.
Please follow this steps:
1) Double tap the home button
2) Hold down on an icon
3) Tap the red "X" on iTunes, and the App Store.
4) Tap Settings > Store > Tap your Apple ID, and choose sign out
5) Tap Settings
6) Tap General
7) Tap Reset
8) Tap Network Settings
Once it has been closed with multi-tasking, and you have rebooted the device in the network settings reset, please sign in, and try again.
Howevr, if you are facing the same issue than for this issue, you may need to call our AppleCare technical support team. A technical Advisor will be able to tell you about Apple's complimentary and fee-based support. The technical Advisor can also assist you in determining what option might be most helpful to you in this case.
Mildly amusing that the instructions for force-closing a program are the IOS 6 instructions, which do not work on IOS 7.
Otherwise I'm having a little success with this. Some apps (not all) are updating. It seems that a few more apps update each time I go through the process (close everything, sign out, and either reset or reboot, then go to the app store, sign in and try to update all). So far it has been a very lengthy, iterative process.

My batch feature in bridge has disappeared completely after update, I uninstalled everything adobe CC using the cleaner tool

My batch feature in bridge has disappeared completely after update, I uninstalled everything adobe CC using the cleaner tool.
I sue the batch feature for my job everyday to batch multiple images with a custom action, I need this feature back ASAP
Iam on a new 27 IMAC OSX 10.9.4
Adobe CC 2014 newest version completely up to date.

The cleaner tool doesn't touch presets, templates or other user data. All it does is flush the installer database to remove blockages. The last time it actualyl deleted any files and folders was with CS3. so whatever you did, you may have hit the wrong button. And while I underrstand your frustration, the download pages states that you are advised to backup your data, regardless...
Mylenium

After updating to iOS 7.1, contact picture can't see fully. Please help.

After updating to iOS 7.1, contact pictures are seen as a circle. In 7.0.4, I see these picture fully. Please give me a solution...

There is no solution, that is one of the new feature of IOS 7.1

Apple TV doesn´t work at all after updating firmware!

After updating firmware Apple TV 3 the only thing that works is the little lamp on the front...it´s steadily blinks. It doesn´t response to remote control, and don´t show up threaded via USB in Itunes for resetting.
Model: Apple TV 3
Itunes: 12.0.1.26
What to do?

The update didn't apply correctly. You need to restore via iTunes.
Apple TV (2nd and 3rd generation): Restoring your Apple TV
Make sure you follow the steps correctly (unplug all cables, connect micro usb, then reconnect power)
Connect directly to a computer, not a keyboard port or USB hub. Try a different cable

After Updateing Firmware defult password is What?

Sir
i have router RV215W and i was update my router firmware to 1.1.0.5 . After finishing updation my router was restart than after i found wifi name is "ciscosb1" but old password is not work . So please tell me the defulted password after updateing firmware .

Hi Udayaraj,
Even if you do a firmware upgrade the password wont get changed until and unless if you do a device factory reset.
once try cisco/cisco or admin/admin.
Thanks,
Phanikrishna

Can i use chinese words in the iphoto ?

can i use chinese words in the iphoto ?

Yes. The usual Chinese keyboard can be accessed from within iPhoto.

Ios5 work on 3GS very slow specially use chinese word

can i down grade ios5 to ios4 because ios5 work in 3GS very slow specially use Chinese word key pad on sms or note,some time wait until 10s will appear the word wasted my time.
ios5 very slow in 3GS open app,app using.

MXStar wrote:
Tried pairing to my ipod touch (to transfer photo's), my wifes iphone 3gs(with the same issues) a friends iPhone 4s, a car handsfree kit we purchased just for these phones and my old nokia so i could tranfer all my old photo'sover (unsuccessful).
Yeah.... only thing in the list that might possibly work is the handsfree kit. As roaminggnome stated, pairing to other phones is not supported.
When trying to pair to the handsfree device, was the device actually in discoverable mode?

After update firmware cannot to search contact use chinese word

Similar Messages

Maybe you are looking for