After upgrading to OX 10.8.2, still using CS3, InDesign crashes when I try to print. I cannot file the files listed in the workaround, so I don't know what to try next. Ideas?
I have found [Hard Drive]/Library/Printers/PPDs/contents/Resources but then do not see the file names listed in the workaround.
Help!
Post a link to the workaround and we'll try to help.
CS3 might simply be too old for Mountain Lion.
Matt
Similar Messages
-
After upgrading from LR V3.4. to V3.5 on my MacPro running Lepoard with 9GB of RAM LR crashes when trying to open image files! I have another duplicate drive running SL and LR V3.4 and the same image files load with NO problem. Any ideas? How Can I send the crash logs to Adobe? HELP!
Yes, that was the correct file.
Hold the alt/opt key on a Mac or is that the ctrl key on a PC when you open Lightroom and you will be able to locate your working catalog from there. I can't recall if it upgrades the catalog or not from earlier Lr3 versions but don't think so, it must have been locating an older catlog in the default location. If it does upgrade the old one, no harm is done just then go to File>Open Catalog and locate your working one from there.
Hope that all makes some sense!!!!
Bennett Richards wrote:
Dear Geoff,
Do you mean delete the com.adobe.lightroom3.plist file?
If I do this and restart it tells me Please upgrade the catalog file"LightRoom3 Catalog" for use with LightRoom3 LightRoom will create a new catalog file in the destination indicated below. The Previews will also be moved to this location and converted for use with lightroom 3. Is this what needs to happen? Before I loaded the V3.5 upgrade this catalog data already WAS in lightRoom V3X. Will it be overwritten? What will I lose? Why might it ( the catalog data ) need to be re-converted?
Thanks -
While doing the most recent firmware upgrade, my new iMac hung on the spinning ball. The instructions said "not" to turn off power during the process, so I don't know what to do. The ball is still spinning.
If you tried resetting the ipod and it still keeps having the same issue you described, try setting the ipod to disk mode.
Here is an article from the apple support website on setting the ipod to disk mode.
http://docs.info.apple.com/article.html?artnum=93651
If you can get the ipod into disk mode, connect it to the computer and rrestore the ipod using itunes.
if the ipod will not go into disk mode, you can return the ipod or set the ipod up for service via the apple ipod service depot.
http://depot.info.apple.com/ipod -
Hi my iPhone 4 is stolen, I ve on it Igotya app. It sent me the pic and location of the *******. I don't know what to do next; a question plz does the phone get locked after 3 times of entering wrong password lock, thanks
What To Do If Your iDevice Is Lost Or Stolen
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
Reporting a lost or stolen Apple product
What-To-Do-When-Iphone-Is-Stolen
Lost or Stolen iPhone? Here’s What to do.
6 Ways to Track and Recover Your Lost/Stolen iPhone
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
Find My iPhone
Setup your iDevice on MobileMe
How To Set Up Free Find Your iPhone (Even on Unsupported Devices -
I recently upgraded to the newest version of iPhoto. I used to have version 7, I believe. Now that I have updated I can no longer see my pictures. I downloaded the upgrader but I don't know what to do next. Please help!
Go to your Applications/ Utilities folder. Finder the upgrader app. Double click it to run it.
-
I have a Mac leopard. Did a recent recommended update. When it finished,I restarted then a window came up to enter Master Password. I don't know what it is and when I try to enter one, the window shakes so I am unable to use computer at all.
Please confirm exactly what Mac this is, and what 'recent update' you installed.
-
I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this problem?
What is the make & model of your home Wi-Fi router that you are attempting to connect your G5 iMac to? Which exact model of iMac do you have?
What wireless security type is your router using: WEP, WPA, or WPA2? If you temporarily disable wireless security, can the iMac connect to it now? -
Indesign crashes when I try and open my document
I created a file in Indesign which represents many days of work.
It crashed indesign when I was pdf'ing the document and now it crashes indesign every time I try to open it.
It is my only version.
I have tried many ways to open it but nothing has worked - can you help?
I've just realised that now - Indesign crashes when I try and open any document!
Thanks very much
NB Someone suggested I send it to Adobe and they may be able to fix it, but I can't find a contact email to send it to.You need to empty the InDesign Recovery folder (which is hidden in your user profile/library). You can find the path to InDesign SavedData in this link: Replace Your Preferences and the recovery folder should be in the same folder with the InDesign SavedData file.
Once the recovery folder is empty you should be able to launch ID, then try opening the file. If it wasn't damaged while writing it back to disk it will be fine, in the last previously saved state. -
I purchased the teacher and student lightroom 5. I put in my code and uploaded my evidence to show that I am a teacher. I am guessing it was sent through to someone. How do I know when I can use the software? I don't understand what to do next.
Please refer below link for more information
Education FAQ -
I recent upgraded my mac laptop to lion. Since then iMovie crashes when i try to export a movie project. I ofter get a message that says not enough memory in the heap zone. What can be done?
I recent upgraded my mac laptop to lion. Since then iMovie crashes when i try to export a movie project. I ofter get a message that says not enough memory in the heap zone. What can be done?
-
My MBP didn't recognise my password, started it in safe mode, I can see my files, but I don't know what to do next, as the image of reset password isn't selectable. I just moved from PC. Need help please...
Safe mode is not what you want in this case. Reboot to recovery mode - hold down cmd-R as the Mac reboots. Go past the language-selection screen, click the Utilities menu, then Terminal. Type:
resetpassword
Followed by the return key, and follow the prompts. Reboot normally when done.
Matt -
Athough there is not much usages in the CPU , but the Fan runs really hard and loud , and i've ready try to reset the SMC ! i don't know what to do and i'm very worried.
Nguyen Phuc wrote:
Athough there is not much usages in the CPU , but the Fan runs really hard and loud , and i've ready try to reset the SMC ! i don't know what to do and i'm very worried.
I suspect you didn't reset it right.
Turn off the machine, let it charge up and then try the SMC reset again.
https://support.apple.com/kb/HT3964
Run a Hardware Test
https://support.apple.com/kb/ht1509 -
whenever i connect my iphone 4 to sync, it gets stuck at step #2 syncing contacts. I don't know what to do next, i've already restored it, changed the cords and so on. what do I do next?
Restore as new.
-
Every time I open the app injustice my iPod gives me a message that says: " Warning, this device is not officially supported. You may experience low performance and instability." I have never jail broken my iPod and I don't know what's wrong. Ideas?
See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod -
Help! PLEASE read this post!!! Don't know what to do next?
Hi. When I'm asked to select a destination volume to intall the Mac OSX software, there is NO visible Hard Drive icon to select. I don't know what to do from this point??
But, let me back up a little... I stepped away from using my computer this morning and about an hour later started to hear an odd "repetitive motored clicking sound" coming from my home office. When I satiated my curiosity, I discovered the unknown noise coming from my G4 tower. Uh oh!?! Not good. When I went to use the mouse, everything was frozen. So I tried to manually reboot my computer. Not only did the odd noise not go away, but I was greeted by that wonderful "flashing file with the question mark" in the middle of a solid grey background on my monitor. I tried doing a soft boot while holding down the shift key, but NOTHING? I tried disconnecting the ethernet cable...NOTHING? Finally I tried inserting the Mac OSX Panther version 10.3 Install Disc while holding down the C key and opened the disc utility to try repairing the hard drive, but there is no visible Hard Drive icon on the left where there should be... shouldn't it be there?? Plus, when the install disc asks me to "Select a destination volume to install the Mac OSX software" there is nothing for me to chooses from. Shouldn't there be an icon of my Hard Drive here for me to choose? If this question has been asked before, please post the link if you know where to find it.
I don't want to reinstall the OSX if I absolutely don't have to. I just want that annoying clicking motor sound to go away and my computer back to normal working order.
Thank you for your time : )Thanks for all the help roam!! You hear about hard drives crashing, but you never think it will happen to you, until it's too late. Unfortunately, that happened to me today... but, I bought an external hard drive a few months back and had backed up the majority of my important files at that time (THANK GOD!!). I had a ton of music on my iTunes, photos in my iPhoto, and TONS of favorite bookmarks organized in my Safari that I'm pretty sure were not backed up on my external harddrive (but at least all my graphic design files were saved on my external). I think I'll chalk this one up to the lesser of two evils and count my blessings. It could've been much worse than it is. Thanks again though for your assistance.
Take care,
Maybe you are looking for
-
TS1363 on connecting my ipod nano it is recognised by my computor but not in i.tunes?
For some reason when connecting my ipod nano to my computor, it is recognised by my computor, but not by itunes. I have followed the procedures under the apple help , troubleshooting etc.which did not resolve the issue. Norton security have investiga
-
Retrieving latest changed date UDATE for Vendor.
Hi All, I have a requirement to retrieve latest changed date UDATE field from CDHDR table based on company code wise??. As the vendor can be same for different company codes, I need to retrieve the company code wise latest changed date of vendor. Hop
-
hi, I am using CUCM9.x and ICM 9.0. CVP 8.5. I am trying to use dfferent payload size for g729 codec for a remote agent. I have my Ingress of call at my core location and over WAN with g729 codec transport my call to remote agent. by Default when i u
-
Passing a List to a method?
Hello, I'm having problems sending a List to a method. To declare the list, I wrote: List<Integer> deck = new List<Integer>(); To pass it, I wrote: keyStream(deck); And the keyStream method is: *public int keyStream(List deck) {* * return fi
-
How to creating a secure flash drive
I would like to encrypt a flash drive; or preferably a folder within the flash drive. Please advise about the proceedure. Thank you.