Aftet update to 20.0.1 flash doesn't work it two tabs the same time.

After update to version 20.0.1 I can't use two or more tabs with flash. It is impossible to listen to music and work in other tab if it use flash. Works only the last tab with flash.

Hi Aman!
Thanks so much for responding. I'll try your suggestions & re-post with the results; I hope one of them solves my problems.
Many Thanks!
Nuts4Mutts :)

Similar Messages

  • When I try to eject my ipod after sync I get the following message:"The iPod cannot be restored because it contains files that are in use by another application.". I tried to restore but it doesn't work and I get the same message

    When I try to eject my ipod after sync I get the following message:The iPod cannot be restored because it contains files that are in use by another application.". I tried to restore but it doesn't work and I get the same message

    Go to your computer's System Tray and try ejecting.  If you can't eject, there is an application that is trying to access your iPod.
    Go to http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx and download ProcessExplorer.
    Go to http://support.microsoft.com/kb/555665 and follow the instructions under Resolution.
    Note that this is a good, general process any time you can't access any file.
    In my case an update to RealPlayer installed a program called RecordingManager that was accessing my iPod.

  • IPhone 4s glitches, is cracked, and camera flash doesn't work. What is the cost to exchange for a new one?

    Front screen of my iPhone 4s is cracked, it freezes/lags, camera flash doesn't work, and every time you press a bit harder on the front screen red and grey vertical lines appear. I have had it for more than a year now, so how much will it cost for me to replace it?

    These prices are for the U.S.
    Out-of-Warranty Service
    If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
    iPhone model          Out-of-Warranty Service
    iPhone 5          $229
    iPhone 4S          $199
    iPhone 4, iPhone 3GS,
    iPhone 3G, Original iPhone          $149
    A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in U.S. dollars and are subject to local tax.
    When setting up out-of-warranty service, Apple will request credit card pre-authorization for the maximum service fee listed above.  This amount will be deducted from your credit limit. The final service fee we charge will be determined during testing and may be less than the service fee listed above.
    Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPhone that has failed due to contact with liquid may be eligible for out-of-warranty service.
    Apple reserves the right to determine whether or not your iPhone is eligible for Out-of-Warranty service. iPhones that are repaired or replaced have a 90-day limited hardware warranty or assume the remainder of your standard warranty or AppleCare service contract coverage, whichever is longer. Please see Apple's Repair Terms And Conditions for further details.

  • Flash SWF/HTML animation preview stops at the same time (around 9 minute mark) without reason. (CS5)

    I have a good sized animation that I am attempting to publish using CS5, but for some reason the animation always stops around the 9 minute mark.
    I don't have any actionscript telling the animation to stop at that particular point, and regardless of how I order my scenes, it always stops at the same time.
    Here is the only actionscript I have, and it's in the first scene:
    movieClip_1.addEventListener(MouseEvent.CLICK, fl_ClickToGoToNextScene);
    function fl_ClickToGoToNextScene(event:MouseEvent):void
        MovieClip(this.root).nextScene();
    My theory is that the animation is too big somehow, and Flash can only load up to a certain point.
    I haven't been able to find any documentation on such an issue so any help is greatly appreciated.
    Also, I'm using a TLF text, but it loads and displays properly in the animation.
    Cheers.

    Thanks for the response!
    There are 17483 in the main timeline across 9 scenes.
    I tracked down where the animation stops and it does seem the limit is 16000 regardless of ordering.
    What I tried to do was boil each scene down to a movie clip and play each one in the main timeline in one frame each.
    I have an actions layer in the main timeline with a stop(); in each frame for a movieclip.
    Then I have an actions layer in each movie clip with a MovieClip(parent).nextFrame(); and a MovieClip(parent).gotoAndStop(1); in the last one.
    For some reason that's not working though, it just loops through the first frame of each movieclip without playing any of them?
    Could you tell me how I could work around this limit/If I am approaching it the right way?

  • HT4859 The backup procedure doesn't work.  This is the second time I have been dissapointed in an Apple product!

    I follow the procedure according to the web site directions and it doesn't work.  Nothing is backed up.  When I go to the icloud web site and sign in, nothing is there.
    In addition, I got my son an iPad.  Because he is under 18 Apple will not let him sign up for an account on the App store (even though I could give him permission and monitor the activity). 
    I had to use my account information on the App store.  The result; account information is confused.  I have had to reset the passwords so many times.
    Where is tech support?  You can't talk to a live person on the phone because Apple will not publish tech support phone numbers.  This will be the LAST time I ever purchase and Apple product!

    Winston,
    You are correct in that each should have his own account.  But because my son is under 18, he cannot have his own account.  I would still be in charge of it and monitor it.  I was not going to lie and falsify his birthday.  So, Apple would not let me create a separate account for the App Store or iTunes for him.
    I am also having issues with iCloud and iTunes and synching my PC with the iPhone.  What a PITA!
    The words "user friendly" are not in Apple's vocabulary!
    This will be the last time I ever buy and Apple product!

  • Firefox updated - forced to install new Flash - doesn't work, but does in other browsers

    Auto-update to latest Firefox. Loaded, then warned to load new Flash. Done. It works in my other browsers fine, but only shows me non-functioning images in Firefox. (When I go to YouTube).
    They don't appear at all in one of my sites - but work fine in other browsers.
    I have; "Plug-ins up to date" in my Flash check.

    The problem seems to be related to Flash and Video drivers. Try updating your video drivers first of all.
    As a temporary workaround try hovering your cursor over the place where the pop-out button should be below the YouTube video screen, then left click there. The video will then display in the pop-out screen.

  • The web address bar no longer displays the url of the open tab, the refresh button doesn't work any longer, and the more time FF is open, the slower it eventually runs.

    Downloaded FF4 a while back. Not the beta version. All seemed to work well for a while. Then the aforementioned problems began. I did not add any plugins or make any changes at all. Web site addresses do not show in tabs, and the refresh button is non-functional. After FF4 has been open a while, it begins to run slower and slower as if there is a memory leak.

    This can be a problem with the file places.sqlite that stores the bookmarks and the history.
    * http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

  • FIFO doesn't work for transactions in the same second

    I have order dependant transactions going into an A.Q in a 8.1.7.4 database.
    The default priority is based on time. ENQ_TIME
    wgich is a date field. I have transactions going into the que in the same second. They are not comming out in the correct
    order when this happens. Oracle 9i v2 supports a more finite timestamp, but when I create a que table in 9iV2,
    it still uses the date column type. Has anyone seen this? any workarounds would be apprecieated.

    Hi Eric,
    If you have specified ordering to be ENQ_TIME, PRIORITY, AQ guarantees that messages enqueued in the same second in the same
    session would be FIFO ordered. However, if the messages are enqueued in the same second from different sessions, there is no
    ordering guarantee b/w the messages. The workaround is to use Priority. So, priority would determine the ordering for the messages
    enqueued in the same second. It would guarantee the right order.
    cheers,
    Brajesh.

  • AFter installing Firefox yesterday to a Mac Airbook, I cannot get rid of the install icon that is on the desktop - Ejecting doesn't work as it reappears the next time I open Firefox.

    Usually the install icon is ejected and the application lives in the applications folder. Not this time. When I eject the icon from the desktop, the next time I open FF, the install package reappears in a window. ??

    One reason why this would happen: the Firefox icon that you see on your Dock actually opens Firefox from the disk image and not from the "Applications" folder.
    To verify this, control-click on the Firefox icon in the Dock and then select "Show in Finder". In the Finder window that opens, check the path. Is it your "Applications" folder or is it the path to the install disk image? If it is path to disk image, remove the icon from Dock and then drag the icon from "Applications" folder to the Dock.
    Edit: Note to myself - submit answer immediately after typing it :)

  • My phone was working fine and at the same time the samsung logo came up saying there was a software update, the screen went green with lines and static. Help?

    I spent time online chatting with reps from Samsung who tried to get me to do a factory reset even though I'd already told them I couldn't access the screen at all. They ended up suggesting I just send it in for a warranty replacement as the phone was only purchased in the summer. I'd like to see if there are other options? I'm trying Verizon's Software Repair assistant but it seems to be stuck at the 25% downloading mark for quite some time. I'm worried I've killed all my data back up as a result. ANY help would be incredible now.

    Morning DeeHutton,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at this article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Best of luck,
    Mario

  • Slatebook x2 - USB flash and SD card at the same time

    Hello, after almost two years of using this device I had a situation when I wanted to connect USB flash drive and a SD card at the same time (I wanted to copy files from SD to the USB flash drive). I connected the SD card (standard size) to the keyboard module. It was mounted OK. Then I connected the USB flash drive to the keyboard module. This was not mounted at all (no error message). When I dismounted the SD from storage menu then the USB flash drive was mounted automatically. I tried various orders of connecting the devices. I managed to get them work at the same time but then suddenly the USB drive was dismounted. I did not try to perform factory reset (please do not ask this for every issue, I have quite apps, files and settings on the device). It does not matter if the Slatebook is connected to power source. The Slatebook software is fully updated.note: The USB flash drive and the SD card works without any problem when only one of them is connected. Does anyone use SD card and USB flash drive at the same drive? Does it work for you?

    Audio Hijack Pro <http://www.rogueamoeba.com/audiohijackpro/> lets you take the audio output from any application and add multiple effects. Using the "Auxiliary Device Output" effect will send the audio to more than one device.

  • Flash doesn't work in Firefox 13

    Installed Firefox 13 yesterday. Now flash doesn't work. Have done all the supposed fixes to no avail. Have uninstalled and reinstalled flash. I'm at my wits end with this issue. I'm a web designer who uses flash in a number of my sites. VERY IRRITATING when my sites don't display properly. Anyone have a solution other than the pat Mozilla "fixes"?

    I received a PM from '''CheckMate''' about this thread. Since this is something that I think should be discussed openly I'll reply here.
    The ActiveX plugin (npmozax.dll) issue is now fixed via the Mozilla blocklist, which automatically disables it. For some background on the ActiveX plugin issue, see [https://support.mozilla.org/en-US/forums/contributors/708425 Blocking the old ActiveX plugin] in the contributor's forum thread.
    The Flash 11.3 Firefox protected mode problem is a separate issue and one related bug is [https://bugzilla.mozilla.org/show_bug.cgi?id=747683 747683] So, if you did have the ActiveX plugin installed and it is now disabled, AND you have Flash 11.3 installed, then the issue is no longer the ActiveX plugin.
    If the problem is Flash 11.3 protected mode (or other issues with Flash 11.3) it's not a good idea to suggest downgrading to 11.2.202.235. The reason why uninstalling Flash and going to a page that requires Flash installs an older version is because the Plugin Finder Service hasn't been updated yet! This is from http://kb.mozillazine.org/Flash#Installing_Flash_on_Windows <br>
    '''Quote:'''<br>
    ''If the Flash plugin is not installed and you visit a page that has Flash content that requires the plugin, the Plug-in Finder Service can download and install Flash for you (see [https://support.mozilla.org/kb/Installing+the+Flash+plugin Installing the Flash plugin (Firefox Support)] for more information). If you want to try this method and Flash is already installed, you can [http://kb.mozillazine.org/Flash#Uninstalling_Flash uninstall Flash] and then visit [http://www.adobe.com/software/flash/about/ Adobe's Flash test page] to launch the Plugin Finder Service ; however, it may offer you an outdated version.''
    The alternative (disabling Flash 11.3 protected mode by editing an obscure file) is not good either. I don't know what to suggest in those cases. I think it would be a good idea if you could bring this up in the SUMO Community Discussions forum. There's already a topic started on Flash 11.3 issues, here:
    *https://support.mozilla.org/en-US/forums/contributors/708430 Flash 11.3 issues (was: flash 11.3 released)
    Here is your original message, for reference:
    ''Hi, Alice- You locked the thread on the Adobe Flash Plugin update 11.300.257 not working question but you really shouldn't have for the following reasons. First, although I too found today that the Active X has been blocked as of June 7, the problem persists and the instruction is to contact the manufacturer. How about contacting Adobe and straightening this out on the Developer level instead of closing the thread because there's another temporary but much simpler solution that I found. Second, the instructions on how to disable Protected Mode are nuts. I'm pretty advanced, but my common sensed tells me this is too complicated to bother with and shouldn't be necessary and you yourself say this isn't a permanent fix. Third, I found a much simpler solution, at least until this bug is fixed. Completely uninstall the Plugin from the Add and Remove Programs list. Then, when you try to access any video on YouTube which uses the Plugin, Firefox reports that it needs an additional Plugin to play the video (look specifically for the FF blue plugin icon). When you click on it, it automatically downloads the PREVIOUS VERSION, 11.2.202.235 which works perfectly. But if you click on the warning below it that Adobe Flash is needed, the buggy 11.3.300.257 version will be installed again! This has to be fixed by the Developers. Until it is, the fix is simply to roll back the faulty update, which could have also been done with a restore point but I wanted to find the cause. FF apparently knows automatically that this plugin is faulty and installs the previous version, but the other instruction is contradictory and installs the 11.3.300.257 Nice!?!? ''

  • I have a black iphone 5 and my flash doesn't work it used to work every once in a while but stopped

    I have a black iphone 5 and my flash doesn't work it used to work every once in a while but stopped I went into the camera app and tried to see if it would flash when I took a picture but I saw it light very faintly and hasn't done lot up since. Should I get the led replaced?

    First, try bringing up Control Center by swiping up from the bottom of the home screen.  Turn on the flashlight by tapping the icon in the lower left.  Does the flashlight work?  If not, perhaps you have a hardware issue.
    If it works, check the top of the screen when you open the Camera app to make sure you have the flash on.

  • Hi I just got my iPad 2 and updated it to ios7 . Here is my problem: my Chinese input doesn't work , I need to restart every time . Is it the problem of the iPad? Or iOS 7??

    Hi I just got my iPad 2 and updated it to ios7 . Here is my problem: my Chinese input doesn't work , I need to restart every time . Is it the problem of the iPad? Or iOS 7??

    Hi Eric Ferguson,
    Thanks for using Apple Support Communities.
    For troubleshooting on this, take a look at this article:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/ts3694
    Error 13, 14, 35 and 50 (or -50)
    These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.
    Best of luck,
    Mario

  • Flash doesn't work suddenly [SOLVED]

    Today flash doesn't work anymore, I do not remember any modifications. In Firefox the browser segfaults after a few seconds of flash content. In Opera the flash area is replaced with weird graphics http://img294.imageshack.us/img294/5845 … 0x800s.png like this. I reinstalled flash10, no help. I installed flash9, no help, same problems.
    Also, gnash plugin works for most flash content, but not for youtube though (on youtube I'll just get a blueish empty screen). Viewing flash videos is a must for my PC use..
    EDIT:
    I discovered that my sound didn't work, and I remember removing dbus from my modules since somebody says HAL starts it.
    I solved it by adding dbus after hal in modules. I know that people say you shouldn't do that, and it creates this error text at bootup, but that did fix my sound, and my flash issues. Weird.
    Last edited by nawitus (2009-05-19 10:03:38)

    that didnt do the trick either.
    I decided to reinstall flashplugin, and then i noticed a warning that said "warning: directory permissions differ on usr/lib/mozilla. filesystem: 700 package: 755."
    should i just try to chmod /usr/lib/mozilla, and then reinstall Flash?
    EDIT: Yep, i just ran sudo chmod 755 /usr/lib/mozilla, and reinstalled flash. Works well
    Last edited by DisturbedFood (2011-03-17 20:52:35)

Maybe you are looking for