Agent cannot go to ready state after lunch or break without loggin out and back in.

UCCX 8.5
I have a small contact center group. One of the agents I just recently setup is having an issue. She is telling me that when she selects work offline and then goes to lunch or break or something and comes back, it will not let her log back into the ready state. She actually has to log out of Agent and then back in. A screenshot of the error is attached. Any ideas?
Thanks guys.

Hi,
Problem An agent using Windows XP was able to start Agent Desktop, but was
not able to enter an active state.
Solution Windows XP can be configured so that the Internet Connection Firewall
(ICF) is active. ICF acts by keeping track of all traffic to and from the
computer; it will only allow information through that has originated from
that particular computer. If a message originates from outside the
computer, it will be discarded.
To solve this problem, either turn off ICF (requires someone with
administrator rights to the computer) or override the defaults to include
known “good” connections like the CAD servers.
And also, is it by any chance happening during a failover or failback scenario in a High Availability (HA) setup?
If its a HA setup, did you install this CAD after the HA setup is made i.e. the CAD has the entries for the ip address of the both the nodes.
Hope it helps,
Anand

Similar Messages

Agent going to ready state after login

Hi guys,
I have UCCX 5.0(2) and I would like to force agent to go to state ready after login. There were some posts on this topic and they suggested to play with workflow:
1. add add action agent ready at startup - for this I get: "Error on Startup Event. Error Message: An Agent State Action may only be used on Answered and Dropped Events."
2. add macro - record putting agent in ready state (keystroke Ctrl +W). This I can do, but agent gets error during login: " Could not execute Macro Action. Unable to playback to windows program."
Did you have similar problems? Did you solve it and how? Or maybe you have some other idea how to force agent to go in ready state after login?
BR,
Jelena

Hi,
Problem An agent using Windows XP was able to start Agent Desktop, but was
not able to enter an active state.
Solution Windows XP can be configured so that the Internet Connection Firewall
(ICF) is active. ICF acts by keeping track of all traffic to and from the
computer; it will only allow information through that has originated from
that particular computer. If a message originates from outside the
computer, it will be discarded.
To solve this problem, either turn off ICF (requires someone with
administrator rights to the computer) or override the defaults to include
known “good” connections like the CAD servers.
And also, is it by any chance happening during a failover or failback scenario in a High Availability (HA) setup?
If its a HA setup, did you install this CAD after the HA setup is made i.e. the CAD has the entries for the ip address of the both the nodes.
Hope it helps,
Anand

CAD - login but cannot be in ready state

Hi, I encountered erratic (sometimes it happens sometimes it does not) error with Agents logging into their CAD (UCCX 8.5 Express) but cannot be in Ready state. Error: "Resource Device is Off". "The Agent extension is out of service. Ready state change and call control operations cannot be performed." Looking at the logs it state 32760. What could be causing this intermittent issue?

Hi Cornelio,
Please deassociate the phone\device from this Agent and also from the RmCm application user in CUCM. and again reassocite it back as before. Also try performing the Directory Resync operation from the CDA (Cisco Desktop Administrator) and see if it helps.
You can try restarting the CTI manager service also if the above workaround doesn't help.
Hope it helps.
Anand
Pls rate helpful posts by clicking on the stars below the right answers !!

Uccx ready state after login

Hi All,
I am curious, is there a way for agent to be in ready state once they login on agent desktop ? appreciate on any replies.
Thanks in advance.

You can try to configure a workflow for this purpose

HT1414 My iPhone4 (iOS 6) does not sync with iTunes. The message displayed suggests to return the iPhone to factory settings (which I cannot do). This happened after the iPhone was upgraded to iOS6 and performed one sync. Any ideas?

My iPhone4 (iOS 6) does not sync with iTunes. The message displayed suggests to return the iPhone to factory settings (which I cannot do). This happened after the iPhone was upgraded to iOS6 and performed one sync. Any ideas?

Lilasil wrote:
The message displayed suggests to return the iPhone to factory settings (which I cannot do).
Why not?

TS3218 My iPod Nano 6th generation fell one time and it kept working with a small crack in the screen.But after a while it just gave out and does not turn on.I try to charge it and all it does is blink the apple icon on and off.When disconnected nothing h

My iPod Nano 6th generation fell one time and it kept working with a small crack in the screen.But after a while it just gave out and does not turn on.I try to charge it and all it does is blink the apple icon on and off.When disconnected nothing happens.

I am having the identical trouble as described above with my month old Macbook Air. I tried everything with the ditto results. Please help anyone!
Mine is a Macbook Air 13', 128GB, 1.86GHz with 4 GB RAM.

I have a new Macbook pro, I cannot get past the country selection screen. 'Continue' is greyed out and keys just make error sounds. How do I move it on?

I have a new Macbook pro, I cannot get past the country selection screen. 'Continue' is greyed out and keys just make error sounds. How do I move it on?

sideeque wrote:
I have the same problem. What did you do last time?
What should I do now? Its around 40 miles away the apple store? Would they pay my taxi fare to go and return?
How can we trust this apple product?
You are still under warranty. Call Apple Care.

I keep getting your applie Id has been disabled even after signing out and back in, what do I do?

I keep getting your applie Id has been disabled even after signing out and back in, what do I do?

If changing your password does not work, then contact itunes support.

HT5622 I cannot get my new Apple ID to show up on iCloud! I've signed out and back in using the new id and even turned my iPad completely off and on. Nothing works. Help!

I cannot get my newly changed Apple ID to change in I cloud on my iPad. I have signed out and back in with my new id and have turned off my iPad completely and back on....it's still showing up with the old user name in iCloud. Help!

Go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Creative Cloud: If after the first years subscription runs out and we dont renew, do we lose the use of the software?

If after the first years subscription runs out and we dont renew, do we loose the use of the software

Short answer - yes.
If you want (or need) software that does not expire, your only choice is CS6.

Cisco Agents goes to Not ready state

Hi,
I have use IPCC ver:4.0(5) SR01ES09_Build095.
We have encountered that our cisco agents automatically change state and it will goes from log-in state to Not ready state.
what was the solution where i have to check the logs.
regards
Salman

Hi Salman-ahmad,
This could be the way you have your agents or CSQ configured, you can configure IPCC to have them to automatically goto Not ready or stay in ready. Have you check your system parameter's?
Under RMCM Subsystem, click the resource link on the left hand side,
there is a "automatically Available" radio box you need to select.
Otherwise you maybe hitting this bug.... Are these your symptom's?
CSCsf11662 Bug Details
Agent goes to Not Ready after making Outbound call from Ready state
Symptom:
Agent makes outbound call from ICD extension (to a non-ICD extension), when
the agent finishes the call, they go into Not Ready state when they expect
to be returned to Ready state.
Conditions:
- Cisco Customer Response Solutions (CRS) 4.0(3)
- Agent makes outbound call from ICd extension whilst in Work state (after just finishing an incoming ICD call).
- Agent places the outbound call on Hold at some stage during the call.
Workaround:
If the above scenario occurs, Agent needs to manually change to Ready state.
HTH, Please rate if so
Regards,
Justin

Issue getting to the "ready" state after turning printer on

This is a new-to-me used LaserJet P2015 that I just bought and installed. Connection is via USB (only choice with this machine). If I turn the printer off via the power switch, and then turn it back on, the self check stops at the third green light (sheet of paper) and does not proceed to the "ready" condition (fifth green light) UNLESS I pull out the paper tray and push it back in. Is this normal? Other than this admittedly-minor but somewhat annoying problem, the printer seems to work OK.

Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.

For some unknown reason my app for Remote no longer works. It says it cannot find my itunes. I have tried to remove it and signed out and back in all that jazz but it didnt help. Anyone else have a solution for this? Thx.

For some unknown reason my application "Remote" no longer works. I deleted it from my phone. Signed out of Itunes and back in. Turned back on home sharing and all that jazz but it says it cannot find my itunes library. Is anyone else having this problem and if so how did you fix it? Thx.

Hello Philly,
I believe that when you reset your ipod(command given from the computer, right?) touch WHILE the ipod was updating, It cleared the system in the middle of writing files, thus corrupting(equivalent of cutting of in the middle of a sentence) the basic running system.
I suggest you go to an apple store and ask for a technical diagonosis in person. they may offer to help if the problem is fixable. If your ipod is still under warrenty, i would guess it would be free/low cost.
~Remember, I am just giving an educated guess on limited information

IMac much faster after logging out and back in.

Last week I installed a piece of software that required me to log out then log back in for it to take effect. After logging back in I noticed that my iMac was running substantially faster than before. When I went to reopen Safari and Mail the applications just appeared with barely a bounce in the dock. Normally my iMac runs OK, but this is noticeably faster.
When I reboot an am automatically logged in I get the same OK performance, but if I log out then log back in I'm right back to running very fast.
Does anyone know why exactly this happens? Or if there is a way to keep from having to log out then back in again to reap this benificial performance?

Yes, it does release memory, Diane, but what is puzzling is that there is absolutely nothing that logging in and out accomplishes that a restart wouldn't also do. I don't doubt that his system is faster, but I don't know why that would do more than just shutting it off and turning it back on again, which is where the mystery lies.

Agent cannot connect to DB Instance after listener restart

I am using 10gR2. I am running EM dbconsole on my machine. It runs fine as long as listener is also running. But when I stop the listener and restart the listener, the dbconsole shows the agent to be unreachable. I tried "emctl reload agent". Still it does not work.
But when i restart dbconsole, it works fine. Is there anyway I can correct this problem without restarting dbconsole? Please let me know.

Hi.
Thanks for your reply. The reason I am asking this
question is because is:
1) If the listener cannot go down at all while
dbconsole is running (because dbconsole needs
listener), then why did they provide the option to
stop/start the listener in the dbconsole web
interface.You can Stop and Start the Listener successully from DB Console if you did not logout of DB Console after the Stop. Once you disconnected from DB Console after Stop, you will get an error. E.g "Io exception: The Network Adapter could not establish the connection". You can restart the listener manually, then reconnect.
>
2) If the listener fails due to some reason, then
there should be some way by which, upon manual
restart of listener, the dbconsole should be able to
recognize that the listener is now up.When the listener fails (or you manually Stop it) while the DB Console is open, it should be able to reconnect when you manually restart the listener. You just have to ensure that your Agent is pinging the correct listener. I have not had a problem with this.

Agent cannot go to ready state after lunch or break without loggin out and back in.

Similar Messages

Maybe you are looking for