Agent inst on virtual host . advantage / disadvantage

hello all
can anybody tell me the advantage or disadvantage for install the em 12c agent on a virtual host ?
we have a big enviroment with many virtual hosts on a phys . maschiene .
its better to install one agent on a phys. host or one agent for one virtual host . ?
thanks

We do both.. physical gets installed on /opt and is just the agent & host target. Virtual is the db, listener, agent and virtual host. This way you can tell when a box that is not "active" is alerting or crashing and the virtual agent can contain the metrics and such set once and consistent. If you failover . you would have to rediscover/unblackout the db if you decided to discover it on the physical host.
Our environment is veritas cluster server .. sounds like you have perhaps more of a vmware type of environment.
Either way I would think you should go with the virtual agents.

Similar Messages

Agent for Apache w/Virtual Hosts question

I have an apache installation with two vritual hosts defined. The AMAgent for apache is installed and working fine. But ... I only want the agent to manage one of the virtual hosts. The virtual hosts are IP based because they both run over SSL. How do I tell the agent to not manage the second virtual?
Mark

I've tried that, and no luck. We actually set com.sun.am.policy.agents.config.notenforced_list.invert to 'true', inverting the meaning of the not enforced list, and there is just one specific sub-URL (https://site1.foo.com/suburl/*) in the list. So everything else should already be 'not enforced'. And testing against other url's under site.foo.com shows that to be true.
The behaviour I am seeing is actually odd ... When I try to go to https://site2.foo.com/, I get redirected to https://site1.foo.com/. You would think that, if the Agent is the problem, then it would redirect me to the login url defined in AMAgent.properties. But it doesn't ... it just sends me to https://site1.foo.com/.
But I know the plugin is the issue because, if I comment out the reference to dsame.conf in httpd.conf, everything works as expected.
Mark

DefaultWebApp on virtual host

The documentation for WLS 8.1 says the DefaultWebApp parameter for virtual hosts
is being
depricated, yet you are not allowed to add more than one web application to a
domain that
has a context root of /. Is there another way to code a default application for
a virtual host
that I am not aware of? What would the advantage of a virtual host be if you
can't assign a
default web application?

We do both.. physical gets installed on /opt and is just the agent & host target. Virtual is the db, listener, agent and virtual host. This way you can tell when a box that is not "active" is alerting or crashing and the virtual agent can contain the metrics and such set once and consistent. If you failover . you would have to rediscover/unblackout the db if you decided to discover it on the physical host.
Our environment is veritas cluster server .. sounds like you have perhaps more of a vmware type of environment.
Either way I would think you should go with the virtual agents.

How can I connect to multiple WLS instances from a single Apache virtual host

Configuration : WebLogic 5.1 SP8 & Apache
I need to be able to have a configuration that looks something like this.
www.company.com/x -> WL cluster01
www.company.com/y -> WL cluster02
In all the examples that I have been able to find they alway defines the the WL
connection for the entire virtual host, but I need to be able to do it on a location
basis is that possible?
Thanks
Jens Schutt

httpd.conf:
<VirtualHost 172.17.9.24:443>
DocumentRoot "/www/X"
ServerName qawebivesta.qa.livecapital.com
ErrorLog /usr/local/apache/logs/qaweb1.error_log
TransferLog /usr/local/apache/logs/qaweb1.access_log
SSLEngine on
SSLCipherSuite
ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
SSLCertificateFile /usr/local/apache/conf/ssl.crt/server.crt
SSLCertificateKeyFile /usr/local/apache/conf/ssl.key/server.key
<Files ~ "\.(cgi|shtml|phtml|php3?)$">
SSLOptions +StdEnvVars
</Files>
<Directory "/usr/local/apache/cgi-bin">
SSLOptions +StdEnvVars
</Directory>
SetEnvIf User-Agent ".*MSIE.*" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
Debug ON
DebugConfigInfo ON
<Location /ivesta/>
SetHandler weblogic-handler
WebLogicHost qawlgc1
WebLogicPort 7001
</Location>
<Location /TMPPhase2>
SetHandler weblogic-handler
WebLogicHost qawlgc1
WebLogicPort 11001
</Location>
</VirtualHost>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/TMPPhase2 works fine, but when I try to access /ivesta I get a 404 from WebLogic
"https://qawebtmp.qa.livecapital.com/ivesta/index.jsp?__WebLogicBridgeConfig
Weblogic Apache Bridge Configuration parameters:
     WebLogic Cluster List:
          General Server List:
               Host: 'qawlgc1' Port: 11001
          DefaultFileName: ''
          PathTrim: ''
          PathPrepend: ''
          ConnectTimeoutSecs: '10'
          ConnectRetrySecs: '2'
          HungServerRecoverSecs: '300'
          MaxPostSize: '-1'
          DynamicServerList: ON
          StatPath: false
          CookieName: WebLogicSession
          Idempotent: ON
          FileCaching: ON
          DisableCookie2Server: OFF
          QueryFromRequest: OFF
          Build date/time: Jun 25 2001 15:09:34
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This should have been connecting to my 7001 instance not the 11001.
Thanks
Jens
"Eric Gross" <[email protected]> wrote:
What do you mean the wrong port? Post the complete output from
WebLogicBridgeConfig as well as the URL you used.
Also, paste the weblogic relative portions from your httpd.conf
Thanks,
Eric
"jens" <[email protected]> wrote in message
news:[email protected]...
I also used ?__WebLogicBridgeConfig to verify that it did pick up thewrong port.
Here is my build date for mod_wl.so in SP10
Build date/time: Jun 25 2001 15:09:34
Thanks
Jens
"Eric Gross" <[email protected]> wrote:
Make sure you are using the latest plugin. As well, add parameter:
DebugConfigInfo=ON and make a request with a query paramater of
?__WebLogicBridgeConfig and you should then see the build date/time.
We can
then see if you are indeed using the latest plugin.
It is not a possibility to get the source.
Regards,
Eric
"jens" <[email protected]> wrote in message
news:[email protected]...
And the solution where you put the WebLogic parm under location
the
last
location
over rule the previous.
I have also tried to upgrade my plug-in from SP8 to SP10 but that
didn't
make
any difference either.
Is it possible to get the source code for the plug-in, I'm afraid
that
it
don't
follow put's all it's parm's a the vhost level no matter where in
the
conf
file
they are placed.
HELP
Jens
"Eric Gross" <[email protected]> wrote:
Yu is correct.
Here is another way to do it as well:
MatchExpression /x
WebLogicCluster=server1:port,server2:port|PathTrim=/x
MatchExpression /yWebLogicCluster=server3:port,server4:port|PathTrim=/y
The general syntax for this would be:
MatchExpression exp name=value|name=value
Where exp=Mime type(*.jsp) or exp=/x(path)
The next argument in the list is a pipe(|) delimited list ofname=value
pairs (ie: WebLogicHost, WebLogicPort, WebLogicCluster, PathTrim,
PathPrepend, etc..).
Hope this helps.
Regards,
Eric
"Yu Tian" <[email protected]> wrote in message
news:[email protected]...
Hi Jens,
I think you can proxy by ppath.
<Location /x>
SetHandler weblogic-handler
WebLogicCluster cluster1
</Location>
<Location /y>
SetHandler weblogic-handler
WebLogicCluster cluster2
</Location>
thanks
Yu
"Jens" <[email protected]> wrote in message
news:[email protected]...
Configuration : WebLogic 5.1 SP8 & Apache
I need to be able to have a configuration that looks something
like
this.
www.company.com/x -> WL cluster01
www.company.com/y -> WL cluster02
In all the examples that I have been able to find they alway
defines
the
the WL
connection for the entire virtual host, but I need to be able
to
do it
on
a location
basis is that possible?
Thanks
Jens Schutt

[SOLVED] I can't get virtual hosts working. What's wrong?

What I've decided to do is try to set up each domain name in the user folder to whom it belongs (for example: /home/username/somedomain.com/htdocs). I can't get it to work though. I keep getting an error saying that there's no index file (although there is) or that the location isn't readable (although it is). I'm trying to make it so that if the domain name matches with a virtual host section in httpd-vhosts.conf that a specific DocumentRoot will be loaded for that domain, etc. But, if the domain name points to my server but doesn't match, then I want the default location to work. I can't seem to make this work.
This is my http.conf:
ServerRoot "/etc/httpd"
Listen 80
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
#CUSTOM
LoadModule php5_module modules/libphp5.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
User http
Group http
</IfModule>
</IfModule>
ServerAdmin [email protected]
DocumentRoot "/srv/http/default/htdocs"
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
<Directory "/srv/http/default/htdocs">
Options Indexes FollowSymLinks
AllowOverride All
Order allow,deny
Allow from all
</Directory>
<IfModule dir_module>
DirectoryIndex index.php,index.html
</IfModule>
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
ErrorLog "/var/log/httpd/error_log"
LogLevel warn
<IfModule log_config_module>
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
CustomLog "/var/log/httpd/access_log" common
</IfModule>
<IfModule alias_module>
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
#Scriptsock /var/run/httpd/cgisock
</IfModule>
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
DefaultType text/plain
<IfModule mime_module>
TypesConfig conf/mime.types
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
</IfModule>
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
#CUSTOM
Include conf/extra/php5_module.conf
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
And here's my httpd-vhosts.conf:
NameVirtualHost *:80
<VirtualHost *:80>
ServerName 45.117.5.40
ServerAdmin [email protected]
DocumentRoot "/srv/http/default/htdocs"
ErrorLog "/srv/http/default/log/error_log"
CustomLog "/srv/http/default/log/access_log" common
</VirtualHost>
<VirtualHost *:80>
ServerName somedomain.com
ServerName www.somedomain.com
ServerAdmin [email protected]
DocumentRoot "/home/normaluser/somedomain.com/htdocs"
ErrorLog "/home/normaluser/somedomain.com/log/error_log"
CustomLog "/home/normaluser/somedomain.com/log/access_log" common
</VirtualHost>
So, for example, I want it to be so that if I visit http://45.117.5.40 that it'll show the stuff ftom /srv/http/default/htdocs but if the domain name matches somedomain.com then I want the server to show the content from /home/normaluser/somedomain.com/htdocs.
What currently happens is that if I visit http://45.117.5.40 or somedomain.com, they both show the same content from /srv/http/default/htdocs.
If I comment out the first VirtualHost section, then everything stops working and I see the default "Access forbidden!" message.
What am I doing wrong?
Last edited by trusktr (2012-04-13 06:15:41)

I fixed it. In case any newbs come across this, I had to add a new <Directory> section for the DocumentRoot of the virtual host. Simply adding the VirtualHost entry in the vhosts file isn't enough.
For example, for the "somedomain.com" vhost in the example above to work, I added this to http.conf:
#This must match with the same location as DocumentRoot in httpd-vhost.conf.
<Directory "/home/normaluser/somedomain.com/htdocs">
#Put whatever directives you want in here
Options Indexes FollowSymLinks
AllowOverride All
Order allow,deny
Allow from all
</Directory>
Let me know if you need any clarification.
Last edited by trusktr (2012-04-13 06:16:02)

SAP LVM 2.0 Provisioned/Cloned Virtual Hosts

Hi All,
Could you please let me know how to define a virtual host in SAP LVM 2.0.
I have configured Virtualization Manager in SAP LVM 2.0 and added the virtual host to SAP LVM 2.0, But I am not able to see configured virtual host cloning screen.
Kindly suggest me on this.
Thanks and Regards,
Prasad

Hi Michael,
Thank you, we have configured virtualization Manager in LVM and host agent is also installed on virtual host.
Thanks and Regards,
Prasad

Virtual Host (localhost) + Wamp 2.1

Hello
I'm trying to test a local URL like xxxxx.localhost or loclahost / xxxxxxx
This does not work.
I read this post related to this topic:
http://blogs.adobe.com/edgeinspect/2012/06/19/shadow-xip-io-virtual-hosts-workflow-simplif ied/
But I do not know what to do.
Thank you for your help.

No change.
Changes in the file are in bold and italics.
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Software Foundation/Apache2.2" will be interpreted by the
# server as "C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "c:/wamp/bin/apache/apache2.2.17"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
#Listen 80
Listen 0.0.0.0:80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_alias_module modules/mod_authn_alias.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule php5_module "c:/wamp/bin/php/php5.3.5/php5apache2_2.dll"
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User daemon
Group daemon
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin admin@localhost
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
ServerName localhost:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "c:/wamp/www/"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "c:/wamp/www/">
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    # The Options directive is both complicated and important. Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    Options Indexes FollowSymLinks
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    AllowOverride all
    # Controls who can get stuff from this server.
#   onlineoffline tag - don't remove
    Order Deny,Allow
#   Deny from all
    Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
    DirectoryIndex index.php index.php3 index.html index.htm
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "c:/wamp/logs/apache_error.log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel debug
<IfModule log_config_module>
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    CustomLog "c:/wamp/logs/access.log" common
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog "logs/access.log" combined
</IfModule>
<IfModule alias_module>
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://localhost/bar
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL. You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client. The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    ScriptAlias /cgi-bin/ "cgi-bin/"
</IfModule>
<IfModule cgid_module>
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #Scriptsock logs/cgisock
</IfModule>
# "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    TypesConfig conf/mime.types
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #AddType application/x-gzip .tgz
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz
    AddType application/x-httpd-php .php
    AddType application/x-httpd-php .php3
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #AddHandler cgi-script .cgi
    # For type maps (negotiated resources):
    #AddHandler type-map var
    # Filters allow you to process content before it is sent to the client.
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://localhost/subscription_info.html
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf
# Language settings
#Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts (STE)
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
#Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
#NameVirtualHost 127.0.0.1
#<VirtualHost 127.0.0.1>
#        ServerName localhost
#        DocumentRoot "C:\wamp\www"
#</VirtualHost>
NameVirtualHost 192.168.1.98
<VirtualHost 192.168.1.98>
        ServerName 192.168.1.98
        DocumentRoot "C:\wamp\www"
</VirtualHost>
Include "c:/wamp/alias/*"

Virtual host _defaultVHost_ is not available

Hi,
I just installed FMS2 and placed in a dummy sharedBall
application. I can connect to the app once, but every single
connection after that one fails and I see this in the edge.00.log
file:
2006-09-14 17:04:53 26981 (i)2631213 Connection rejected by
server. Reason : Virtual host _defaultVHost_ is not available. -
2006-09-14 17:04:53 26981 (w)2641213 Connection rejected by
server. Reason : [ Server.Reject ] : Virtual host _defaultVHost_ is
not available. -
And then I see this is master.00.log
2006-09-14 17:02:00 26968 (i)2581221 Core (27589) started,
arguments : -adaptor "_defaultRoot_" -vhost "_defaultVHost_" -app
-inst -conf "/usr/local/macromedia/fms/conf/Server.xml" -name
"_defaultRoot_:_defaultVHost_::". -
2006-09-14 17:02:31 26968 (i)2581223 Core (27589) is no
longer active. -
2006-09-14 17:02:31 26968 (w)2581256 Core (27589)
_defaultRoot_:_defaultVHost_:: experienced 1 failure[s]! -
2006-09-14 17:02:31 26968 (i)2581221 Core (27726) started,
arguments : -adaptor "_defaultRoot_" -vhost "_defaultVHost_" -app
-inst -conf "/usr/local/macromedia/fms/conf/Server.xml" -name
"_defaultRoot_:_defaultVHost_::". -
2006-09-14 17:02:31 26968 (i)2581223 Core (27726) is no
longer active. -
2006-09-14 17:02:31 26968 (w)2581256 Core (27726)
_defaultRoot_:_defaultVHost_:: experienced 2 failure[s]! -
2006-09-14 17:02:31 26968 (i)2581223 Core (27589) is no
longer active. -
2006-09-14 17:02:31 26968 (i)2581223 Core (27726) is no
longer active. -
Can anyone shed some light as to why I'm getting these
failures?
Thanks in Advance

Hi,
I sent you an email, maybe it's in your spam box though.
Thanks!Dany
Date: Wed, 4 May 2011 03:03:49 -0600
From: [email protected]
To: [email protected]
Subject: Connection rejected by server
@http://forums.adobe.com/people/Chicohuman , if you are referring to your RTMFP issue that we are discussing on the other forum post, then that is entirely different from this one, because it is FMS 4.0 in your case (FMS 2.0 in this post's case) and its RTMFP in your case (RTMP in this case). Or are you saying you are also finding connection rejects with RTMP as well ?
I would like to know if the original problem of connection rejects are still happening with VHost being unavailable ?
Thank you !
>

Problem with DNS and/or Virtual Host (works from inside, not from outside)

I am running several web sites (as virtual hosts) successfully on one Xserve (192.168.200), which are accessible internally and from the Internet (via forwarding port 80 on our firewall).
Now I am trying to add another web site (newmini.domain.com), which however is running on a Mac mini (also on the same subnet as the Xserve) at 192.168.100. What I did is make an additional entry under the Xserve's DNS for the domain (domain.com) (+ Machine..., pointing to 192.168.0.100). (I also made the necessary changes to the Mac mini's httpd and hosts configuration--no problem there).
Now, here's the strange thing: All computers on the subnet, whose DNS points to the Xserve, can see and browse newmini.domain.com fine. No problem. The computers ask the Xserve for the IP of the host in question, the Xserve says, "192.168.100", the request goes to the Mac mini, and it serves the web site as expected.
But this doesn't happen if the request comes from the Internet. Instead of seeing the Mac mini, the client sees the default web site of the Xserve... So it appears that somewhere, the virtual host part of the HTTP request is lost between our firewall and the Xserve.
Any ideas? Thanks.

It's not going to.
You say you've setup port forwarding on the firewall. Port forwarding only cares about the port number (80). It knows nothing about the nature of the request (e.g. the hostname that the web request is for). Therefore all extenal connections on port 80 get sent to the XServe. The newmini doesn't see the traffic at all.
If you only have a single public IP address you can only forward port 80 traffic to a single machine. Your options are to either use a different port number, or configure the XServe to proxy the connection to the mini (so now the traffic goes router -> XServe -> Mini -> XServe -> router), although that might not do what you want since it still places load and dependencies on the XServe.

Apache virtual host with OSX Server?

I have been running OSX Server for a while now, and just recently I decided to get McMyAdmin for my Minecraft server. The web client for McMyAdmin runs on port 8080, but I wanted it on port 80. I wanted to use it with my domain, so I just created a sub domain and pointed it to my server. The problem is that OSX Server apparently doesn't let me use port 80, even when websites are turned off. I decided to delete Server and just use plain apache. This worked until I realized that my website was only accessible locally. I have all the correct ports forwarded, etc. But I get the error:
Response Error.
Technical description:
502 Bad Gateway - Response Error, a bad response was received from another proxy server or the destination origin server.
when I try to connect from outside my network. This is probably just some simple thing I missed but it would be nice if someone could just point out what I did wrong here. Back to the point, I want to know how to run the proxy to my web client on port 8080 AND ALSO run OSX Server with or without apache virtualhost.
Thanks in advance,
Eamon

Web is stupidly easy - Apache has extensive support for multiple virtual hosts in a single server and will happily support as many domains/hostnames as you can throw at it.
Mail is a little trickier since it needs to hook into some kind of directory server to validate user addresses.
Mac OS X's Open Directory does support this, but it's a little cumbersome (basically every user has to exist in the main Open Directory domain as well as having a secondary email address(es) in the other domain(s).
This can get especially tricky when you have users with the same shortname in different domains - for example if you give [email protected] a secondary email address of [email protected] and you then get a new user [email protected], you can't give the third 'joe' the address 'joe' in Open Directory since that's already taken. This means he'll have to login using different credentials from his email address. Confused yet? You bet.
If you're prepared to eschew Open Directory you can just use Postfix's built-in support for virtual hosting, but it's a little more complex to setup and support and is entirely command-line based (i.e. there's no GUI for setting it up or supporting it).
So, for that reason you might be prepared to setup multiple virtual machines for each domain. It really depends on how much the domains are related (if at all).

Oracle9iAS R2 - Virtual Hosts with Portal and SSO with OIDDAS application

Hi!
I have installed a the machine with name minsk.discover.local. The machine have installed Infrastructure and Portal. The instalation is sucessfull and i work fine. But i have publish Portal to WEB with name intranet.discover.com.br. The Oracle describe:
1 - Create the virtual hosts in SSO and PORTAL - OK
2 - run ptlasst to create SSO Partners Applications - OK
After this steps iwork fine with Portal and SSO, but when i click in portlet to create user to access the application OIDDAS, the Portal redirect to login page of SSO in address mct.com.br, the internal name, when then name not responde in the internet.
I need a help!!!!
Marcio Mesti

I just spoke to the Oracle App server admins, the two servers in question are clustered.
So my question changes slightly to:
What is the best way to install and configure a webgate for clustered Oracle App servers with mulitple virtual hosts, that are residing behind a load balancer (Traffic Manager)?
Thanks,
Andy

Use require group in virtual host

Hi,
I have set up several virtual hosts in my middle tier, and configured them as partner applications so that OID/SSO can be used for authentication. It works fine, but the only supported method I can see is 'require valid-user' which allows any user in OID access to all virtual hosts. Does anyone know of a way around this using OID (not mod_auth). We want to allow users within a group access to individual virtual hosts.
Thanks,
Karen

Hi there,
I just wanted to clarify my question, has anyone been able to use group authentication using OID to restrict access to websites hosted using AS10g? My website is just plain html, but maybe someone has done something similar by adding a java wrapper to perform the authentication (that seems like overkill to me but maybe there is a more elegant workaround)?
Thanks,
Karen

How to create and access a Virtual Host on the J2EE WAS?

Hello, I have searched through the Forums and help.sap.com and found a lot of information on how to set up a Virtual Host on the J2EE server but am having issues with it working.
The goal is to provide a simple virtual host on the J2EE Portal server to host some static image and HTML files. Previously I had stored these files in the standard publicly accessible SAP J2EE folder location /usr/sap/<SID>/JCxx/j2ee/cluster/serverx/apps/sap.com/com.sap.engine.docs.examples/servlet_jsp/_default/root/. This location is resolved to when using the URL <host>:50000 for example.
The main issue here is that during Portal support pack applications this folder gets wiped out and we have to remember to save off any custom files and folders in this location and replace them.
I would like to create a virtual host to store these static files (i.e., branding-image.jpg, etc...).
I have run through the process of creating the virtual host both using Visual Administrator and <host>:50000/nwa but am not able to get the virtual host name to resolve properly.
The following are the steps that I have taken. Let's assume the standard SAP portal (i.e., xSS, etc...) is running properly on <host>:50000.
1. create virtual host via Visual Administrator/NWA called 'sapwebserver1' by using the Create Host option (takes on the attributes of the 'default' standard virtual host)
2. change the root directory for this virtual server to a custom folder at E:/tmp/mimes (where E:/usr is where the J2EE files are all installed), no start files were set up and nothing else was changed in the new virtual host record, no permissions were changed on the /tmp/mimes folder from whatever the default Windows user permissions are normally set, I am using a local Windows administrator account but I have not seen any reference in the help files or the examples that indicate that any specific permissions updates need to be made on the virtual host root folder
3. restarted the J2EE server as well as the HTTP Provider service
4. before updating the company DNS, I wanted to test this locally on the server and so have updated the server's local HOSTS file with a <host IP address> sapwebserver1 entry
5. from that server I can ping the sapwebserver1 virtual host name and it resolves properly to the machine's physical IP address
According to all of the documentation and examples I have seen I should now be able to (from that server) launch a browser and access the static files in the virtual host by referring to http://sapwebserver1:50000/branding-image.jpg for example. This is not working and the browser just brings up a Cannot display the web page error in IE. By referring to the virtual host name sapwebserver1:50000 it's supposed to hit the J2EE server and based on the host name sapwebserver1 realize that it should resolve to the root directory E:/tmp/mimes. This is not happening. Just as a test I have created a copy of the 'default' virtual host and called it sapwebserver2, updated the local HOSTS file for this entry, and tried to see if that would work like the 'default' host. My expectation was that http://sapwebserver2:50000 would behave the same was as http://<host>:50000 but it too fails to resolve just like the sapwebserver1 virtual host refernce.
Would anyone happen to have any pointers on what to do next? I just want a simple virtual host to be able to serve up some static images and files.
Thanks for any insight or assistance you might be able to provide here.
Graham

This defeats the purpose of trying to centralize SAP-related web resources on the SAP server. Typically IIS/Apache or other non-SAP servers are under the control of IT and not the SAP BASIS group.
We simply would like to have a centralized location to store static web files so that they are not overwritten during Portal support pack applications.

HOW TO DEFINE VIRTUAL HOST NAME IN HPIA64 + SAP R/3 ENTERPRISES 4.7

Hi all,
I am trying to install sap r/3 enterprises 4.7 with OS as HP-UX and Database as Oracle in a cluster environment.
In cluster environment sap installation should be done on virtual hostname ( package id ). I'm using the env variable SAPINST_USE_HOSTNAME=<VIRTUAL HOSTNAME>.
My cluster is running and I'm able to ping it from network, but at the time of SAP Installation my sapinst starts with the physical host name not with the virtual host name.
What can be the solution ..?
Thanks,
Chandresh Pranami.

Hi Chandresh,
Try executing sapinst with virtual hostname.
eg. ./sapinst SAPINST_USE_HOSTNAME=<VIRTUAL HOSTNAME>.
This should work.
-Pinkle

How to configure multiple virtual hosts for the same context root /

Hi,
I am using Glassfish V1 U1 - b14 on Solaris.
I am trying to configure two applications to be mapped to the / root context, each one in its own virtual host.
Two things I have noticed:
1. I have to manually add virtual-hosts="hostId" in domain.xml/application-ref ... looks like just simply deploying the app does not do that although the application is set as default for its particular virtual host. Is this a bug?
2. Although I have set for each virtual host the default web-app correctly, and they both respond fine, I cannot map both of them to the / context. The second application (chronologically deployed) does not respond when called with the / context ....
Any ideas? Is this a bug again?
Regards,
Rares
Message was edited by:
raresp

Wow, that's a shame. All mighty Application Server and two different apps on two different virtual hosts are considered ambiguous to have the same context root definition.... Fair play to Tomcat and 90% of the rest of servlet containers!
In my case I have the same EAR we are planning to deploy to many (up to 30) virtual hosts. Faking different context roots for each deployment will bring unnecessary overheads...
Should I file a bug or feature request?
Thanks again for your answer, although you're basically saying it is not possible I will wait and look a while for a possible solution before bringing this topic to a conclusion.

Agent inst on virtual host . advantage / disadvantage

Similar Messages

Maybe you are looking for