AirPort Extreme Quits Working When MacMini Starts Up

I have an AirPort Extreme. It works perfectly, delivering signals to Apple TV, iPods, wireless Dell laptops, and so on except when the MacMini is turned on or wakes from sleep. If the MacMini is placed far enough away, the wireless works again. I have changed out Ethernet cables (the MacMini and a Dell tower are both connected through Ethernet because the Dell has no wireless card and the MacMini is the one device that will NOT pick up the AirPort). It seems crazy that the these two Apple devices will not work at all together but work fine otherwise. I am running Snow Leopard on a 2006 MacMini. Any ideas? Thanks.
Gina

as I can see it has the same preferences as the other network.
I've seen people tell me this, despite one service needed PPoE
I would start with a factory reset, so you are on the right track (if doing it properly).
Try to download 5.6, because that 6.0 is a PoS.
About AirPort Utility 5.6 for Mac OS X Lion
http://support.apple.com/kb/DL1482

Similar Messages

Why does AirPort Extreme stop working when I plug in a USB hard drive?

Why does Airport Extreme stop working when I plug in a USB hard drive? The USB drive has its own power supply. I've tried isolating the hard drive from Airport using a powered USB hub to no avail.

The USB port on the AirPort Extreme is borderline as far as its ability to supply adequate power to a hard drive. Another way of saying the same thing is that this is not a high power USB port, like you would find on a computer.
Your 2TB drive likely requires a bit more current than the USB port on the AirPort Extreme can supply. It is also possible that the drive's firmware may not support a network USB connection....only a "local" connection to a computer. Check with Seagate support on that possibility.
Try using a powered USB hub with the 2TB drive....and make sure that the drive is formatted correctly in Mac OS Extended (Journaled) or FAT32....which the AirPort Extreme USB port can accept.

Airport Extreme: Internet working when directly from modem to computer, but not when using airport extreme. i have hit the reset pin and now do not know what to do.

Using Airport Extreme:
- Internet working when directly from modem to computer
- Internet NOT working when modem is connected to AE
- Internet NOT working when modem is connected to AE and AE is connected to computer
- I have hit the reset pin
Now what do I do?
(in advance - lots of love to anyone who helps out)

What sort of Internet connection do you have and who is your Internet Service Provider?
What is the make and model number of your modem?

Airport extreme quit working with mac,dell etc.digital cable the issue? or?

Hi! I had luck here before, so I'm hoping I can find luck again! I'm with my folks, who run a Dell Desktop with WIndows XP Home Edition with cable modem, my Airport Extreme running wireless with my Macbook (listed) and an older than old dell notebook with a wireless card. It has been running fine for the last year.
Now, the new problem: My parents upgraded their phone to digital- so for the first week or so, every time the phone rang, I lost wireless- I presume from interference. On Monday, I was online, and was abruptly cut off. I was not able to get on again for the rest of the day. As sometimes the cable goes out- I didn't think much of it. Until the next day when I couldn't get back online, and the dell desktop could not get on either. My father called in to TW who walked him through several different solutions- none of which gave me wireless. I'm left with an old dell desktop to work on- (I'm a mac girl- I'm going insane). I need the stuff on my macbook- job applications to be sent, book writing for uploads- and my sanity back. Is it possible my Airport Extreme went? Is it the modem itself? Is it the wireless phone interference? My mac will show it can see the network- but can't connect to the internet- Any help at all will be greatfully accepted!
Thank you!!

What is the make/model of the new modem?
Since it sounds like your parents now have VoIP as their phone service, it might more likely be a bandwidth issue as opposed to a Wi-Fi interference issue that you are seeing. This would make sense since the Dell desktop is not able to connect to the Internet either.
One thing to try is to perform a complete power recycle of all the network components to see if this resolves the issue of connectivity. The simpliest method would be to first power everything off. Then, starting with the modem, power it back on; wait 10 - 15 minutes, and then, power-up the AirPort Extreme Base Station (AEBS); wait 5 - 10 minutes. Finally, power on the computers.

Our airport extreme network works fine with our 6 devices. But when someone comes over and tries to log on, they can't until we restart the airport. Then they can get on, but it knocks one of our devices off the network. Any ideas?

Our airport extreme network works fine with our 6 devices. But when someone comes over and tries to log on, they can't until we restart the airport. Then they can get on, but it knocks one of our devices off the network. Any ideas?

I have not done a factory reset, I was trying to find out if I had some setting configured wrong first. I figured I'd just make things worse if went through a reset!
Here is a couple of screen shots:

Airport extreme wont work with dhcp modem

Hello,
my airport extreme quits to work with my adsl modem after several hours (one night), the internet connection is gone even when the light is still green, maybe after the internet provider changes ip?
I am using wireless lan to get the connection.
If I then take out the cable from my modem and put it directly into my computer via ethernet, internet signal is there and everything works fine. Sometimes, restarting the airport extreme station and putting out/in the ethernet cable, helps and the internet signal is there for a whole day, but next morning same procedure..
Thanks
Stefan

Think you are suffering from the same problem that '000s of AEB 802.11n users have. I have tried every fix shown on Discussions and nothing has proved to be permanent.
It is said that Apple is aware of the issue and a permanent fix is coming with 10.5.5 to be released soon. Hope this is right because it is driving me nuts.
Are you really using 10.4.11 - if so, don't know what your fix is.

My airport extreme is working but will not connect to my mac pro

my airport extreme is working and all other devices connect except my mac pro computer, How do I resolve this problem?

Hi fdrussell,
Welcome to the Support Communities! Were your Airport Extreme and Mac Pro communicating earlier? If so, what changed?
First try shutting down the computer, and recycling the power to the Airport Extreme. Then start the Mac Pro and see if that resolves the issue.
If needed, perform a Hard reset of the Airport Extreme:
Resetting an AirPort base station FAQ - Apple Support
http://support.apple.com/en-us/HT3728
I hope this information helps ....
- Judy

My Airport Extreme Stops working every evening...

Funny! My Airport Extreme stops working every evening at about the same time for 4-5 hours. I am assuming that there is some sort of "usage setting" that needs to be set. Unfortunately I cannot find that setting. Any help appreciated.

A windows 7 laptop is also not seeing the airport extreme wifi signal. So I have a Mac Book Air, iPad & wired devices connected fine. I have an iPhone 3Gs, an iPhone 4 and a windows 7 PC all failing to connect. They all connect fine to other wifi devices. They all connected fine to the Airport extreme until the recent problems started. I don't think it's an iPhone issue, therefore - more likely to be an issue with the Airport extreme?

I have a new Airport Extreme that works well with my IMac but is intermittent with our Windows 7 PC. Any ideas?

I have a new Airport Extreme that works well with my IMac but is intermittent with our Windows 7 PC. Any ideas?

Thanks planb77. Your instructions worked but I had to do a little more than you stated. I did not realize that transferring files to a new computer was not enough. When the iPod synced I was told I needed to "authorize" my new computer to get my iTunes purchases to sync to the iPod. So after the initial sync, I ejected and disconnected the iPod, went into the iTunes store, set up "home sharing" and then authorized the new computer. When that was done I reconnected the iPod and was able to sync all my books and music. The only thing I couldn't do was rename the iPod as iTunes never asked me to. Is there a way to rename it after it has been set by iTunes as "owner's iPod"?

I was downloading an album when my computer quit working, when it came back up all of my music was missing from my library, what happened and how do I fix it?

I was downloading an album when my computer quit working, when it came back up all of my music was missing from my library, what happened and how do I fix it?

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

How do I configure my Airport Extreme to work in Bridge Mode and provide specific IP addresses to clients

My Airport Extreme is working with an Airport Express to wirelessly extend my wireless network. Both Airports are configured in Bridge Mode per the instructions I found on Apple's support site. I want to assign a specific DHCP address to a wireless camera that is in range of the Extreme, but I understand that the Extreme needs to be in DHCP Only mode to do this. But if I change the mode to DHCP Only, the Extreme will lose contact with the Express. How can I get both functions to work - wireless network extension and specific DHCP addresses?

Then what device is providing DHCP? Only once device per subnet should be the DHCP server. One should be DHCP and NAT and the other in Bridge mode for most home setups. The unit with DHCP and NAT should be the one connected to your cable or DSL and the other set in Bridge mode only extends your network.
On the wireless config page set whichever you're using to extend your network to "Extend a wireless network" and give it the details of the network to which you're attaching it.

Setting up a Apple Airport Extreme to work on the Telecom New Zealand Broadband network?

Has anyone had any success in setting up their airport extreme to work on the Telecom New Zealand broadband network without having to connect it to the modem which NZ Telecom supply?
Any advice and tips would be welcomed!

1. Since a "router" is needed next to the cable modem and before the ethernet switch, should we put the new Extreme in that basement location? Or, should we instead put the new Extreme somewhere on the main floor of the house (connected by ethernet) and leave the old one where it is?
Assuming the older Extreme is no older than Gen3 or Gen4 it is a perfectly adequate router for the speeds that cable will generally give you.
And therefore it is best to bridge the new AC extreme and use it upstairs via ethernet. That will then give you the best wireless in the most suitable area of the house.
2. Should we somehow bridge the two Airport Extremes (the old one and the new one) into one wireless network?
Yes, what is called roaming network. Both units create a wireless network.
You simply setup same name and same security/password on all the devices for wireless. The wireless channels are the differentiator.. and you can either leave that on auto or take some control over it and set manually. I would be inclined to do it manually just because the AC wireless needs the 149 channel for high speed AC.. so you do not want the old Extreme in the basement using that. Force that one to channel 36 or 40. However it is likely to work itself out ok on auto.. but I recommend you check it.
The apple docos on roaming are rather ancient..
Here is a post with newer info.
Setting Up Roaming - New AirPort Extremes and Utility
3. Should we go a further step and also bridge in one or both of the old Airport Express units, perhaps on the top floor of the house for example?
Yes, if you have a black spot with poor wireless you can add the Express to help. The old ones are single band and will probably work better at 2.4ghz but whatever suits you.. perhaps setup one on 2.4ghz and one on 5ghz.

Will airport extreme card work on other wireless systems

will airport extreme card work with other networking systems such as time warner cable with a router?

Note, Airport Extreme on PowerMacs is limited to 802.11g. If you find you get a router that is 802.11n, and have devices that need 802.11n speed, they should be on a different wireless network. Otherwise you can set the network to be 802.11n and 802.11g for both 'n' and 'g' devices to hook up to it from the router in question. Be sure the PowerMac in question does support Extreme, and not just the original Airport by visiting this article:
http://support.apple.com/kb/ht1621
And identifying your Mac in this article:
http://support.apple.com/kb/HT3082
If you can't find your Mac on the article, go to Apple menu -> About This Mac and tell us the Machine ID. If it is a notebook, the name of the machine is on the screen frame. If it is a machine with a display and a built-in optical drive that has no name, it may be an iMac. That is significant as well. Since you posted in the PowerMac forum, without telling us your machine, we can't help you further until you do.

Why does Itunes stop working when I start to play a movie

Why does Itunes stop working when I start to play a preview or watch a downloaded movie rental

Let's try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

I have a new Airport Extreme that works great with my IMac but keeps dropping out on our Windows 7 PC. I have tried all 11 2.4 Ghz channels and they all have dropout issues. Any suggestions?

I have a new Airport Extreme that works great with my IMac but keeps dropping out on our Windows 7 PC. I have tried all 11 2.4 Ghz channels and they all have dropout issues. Any suggestions?

Hello sstefanik
Check out the articles below to troubleshoot your issues with getting a proper connection with Wi-FI. Try creating a new Network Location and join your network to see if you can get on that way.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Using network locations (Mac OS X v10.6 and later)
http://support.apple.com/kb/ht5289
Regards,
-Norm G.

AirPort Extreme Quits Working When MacMini Starts Up

Similar Messages

Maybe you are looking for