Airport wont connect on my home network when its password protected but..
Airport wont connect to my home network when its password protected. It will connect to my network if i go into my linksys router and set the network to "not password protected". If i put on the security and choose a pass phrase it always says connection failed when i try to connect to the network. anyone got any suggestions on what to try ?
ps and yes i am putting in the password right
Hi Nickerjones
When you enter your password for the Linksys router, is it generating a separate code phrase? By this, I mean if you enter "password", the Linksys converts this to a code that might look something like "ju457re76en7pq" for example. The code is generated based on an algorithm that Linksys uses for their products and should be visible in the set up page. Sorry, I haven't used Linksys for several years so I can't remember all the details.
Other manufacturers use different algorithms for their products, so if you entered "password" on an Apple product, it would likely convert the phrase to a different code, which the Linksys would not recognize. If you can locate the actual code that the Linksys generates when you enter your password and use that same exact code when you enter the password for your wireless on Airport, you may have your problem solved.
Similar Messages
-
Connecting to an unknown network when a password is required.
I struggle to connect to an unknown network when a password is required. In settings, there's a tick as if it's connected but it isn't. What am I doing wrong?
- Googling shows that you have to join the network and then open Safari and agree to the terms and conditions and then the connect will be completed.
- Try:
Reset networks settings: Settings>General>Reset>Reset Network Settings
- Go to Settings>Safari and clearing history, cookies and data -
HT1338 Wifi won't connect to my home network. "Connection Timed out"
I went to go onto my mac mini today and it wont connect to my home network. It never had a problem connected. I thought it was my network but all my other computers and devices are connected fine. I try to connect to an alternative router I have and it still says that it timed out. Please help!?
Does the iOS device connect to other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
my ipod 4rth generation wont connect to my hom wifi but will connect to others . like when i try to use apps that require wifi it says i dont have wifi . HELP !
Since you have already isolated it down to your home network, if following Steve's instructions do not fix your issue, contact your Internet Service Provider or Router Manufacturer and make sure your network is set up according to this information: iOS and OS X: Recommended settings for Wi-Fi routers and access points
-
time capsule first said the back up was delayed, now it won't connect to my home network. my internet is working fine and so is everything else but when i try to connect to the time capsule it says to check my server and ip address and if it continues to contact system administrator.. i didnt change anything, please help!
Lion networking.. just need to reboot everything.. modem TC and the clients.. then it will work.. Sometimes just the TC is enough.. sometimes just the computer. .. Vista golden networking award.. did you turn it off and on again??
-
I have an iPad2.
when I connect to my home network I see a list of at least 5 or 6 networks. how do eliminate this list?iPadNoobie wrote:
I figured I didn't really phrase the question correctly...
I was just wondering why there are so many on the list and the ones that don't have a padlock icon next to them worry me...
I would like to block/disable them.....
The wireless radio picks up and displays all WiFi signals that are openly transmitted. That is to show you the networks available to join. Those that do not have the padlock are unsecure networks, which should not bother you as long as you do not attach to them. Their being open has no affect on your security.
You cannot completely and permanently block their being listed. Just ignore them and don't attach to any unkown networks. -
Connecting to existing home network via Airport Express
I had my Macbook Pro connected to our home router which allowed me access to our home network and the internet. On this network we had connected both my MBP and my flatmates PC (which is connected directly to the router via network cable).
Through this configuration i was able to both access the internet AND access files on the PC. I have recently purchased and airport express to eliminate the need for the network cord. Since setting up the AE i have been able to connect to the internet no problem by creating a wireless network and using all the automatic settings, however in the process i have lost my ability to connect to the home network and my flatmates computer. In fact, under "networks" in finder the home network has disappeared. Also in network prefences i am getting a warning saying "The cable for Ethernet is not plugged in".
Is anyone able to tell me what im doing wrong?
thanks ....
Message was edited by: seysearlesThe problem is that the AirPort Express (AX) is creating a subnet.
To prevent that, configure the AX to act as a bridge (so that it is NOT sharing a single IP address). -
Connecting to Wireless Home Network w/o an AirPort Card
I want to connect a CRT iMac that's incompatible with AirPort Extreme to a wireless home network.
The problem is that every USB adapter I've seen is Windows-only.
Does anyone know of any USB-wireless adapters that are compatible with OS X?Strider, it
i is
standard-Airport-ready, but as Henry observed, it's not worth spending twice as much as an ethernet bridge would cost. (At least not for a desktop.)
(I was hoping to save some money by using USB but judging by the other Topic, that would be more trouble than it would be worth.)
I have found one good deal on an ethernet bridge here http://store.yahoo.com/justdeals/me101au.html . Apparently the reason that it's inexpensive is that it was manufactured to be sold in Europe. Is there any reason that that bridge, with a U.S. power adapter, wouldn't work well on this side of the Atlantic? -
Airport on my Macbook will no longer connect to my internet network at home. I was on campus using my university's network today and now Airport only wants to connect to it and will not change back to my home network. It has something to do with the 802.1X, and I don't know enough about networks to know what that does. Is there someway I can just reset my entire airport settings to where it would be like the first time I used my Macbook and configured it to my home network?
Is there someway I can just reset my entire airport settings to where it would be like the first time I used my Macbook and configured it to my home network?
Did you Shut Down the Mac and then power it back up? Can you connect to your home network now if you click the fan shaped AirPort icon at the top of the Mac's screen?
If your home network name does not appear, click Join Other Network, then click Show Networks.
Click the name of the network that you want to join and enter the password if required
Are you saying that you want to delete the connection to the school network from your Mac? If you do this, you will have to setup the connection again if you head back to the school. -
Today my ipad will not connect to my home network
new ipad air, set it up fine and used it with my home network 2 days ago. Charged it last night and now will niot let me connect to my home network. I did reboot
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Tecra A10 - Refurbished - unable to get it connected to my home network
I just got this Tecra A10-104 refurbished Laptop...before I take it back I am asking here just in case theres something I have missed as I am unable to get it connected to my home network.
I am running a Belkin Wireless Router that has 2 main PC's directly connected (LAN), and another PC wirelessly connected.
This is my router: http://www.belkin.com/uk/support/article/?lid=enu&pid=F5D8233uk4&aid=9238&scid=0
All PC's working fine and connected.
Now I'm trying to setup this laptop to connect.
I uninstalled the Vista Business and ussed the XP Pro Product Recovery disc that came with the Tecra.
My WiFi card is: Intel(R) Wireless WiFi Link 5100 (Driver Date: 27/04/2008 - Driver Version: 12.0.0.73)
It sees the network but no matter what i try just won't connect.
What I have done so far (read before suggesting stuff I have already tried):
Reconfigured routers WPS to Shared Key system.
Made sure the wireless adapter has settings set to 20/40hz (auto)
Restarted router, cable modem & laptop several times
Wireless button on side of Laptop is ON.
FN + F8 to enable WIFI (ON) BLUETOOTH (OFF)
Added wireless network to Auto Connect settings along with SSID and passcode end encryption method.
Clicked connect when network appears in network viewer dialogue and retyped passcode.
Not working.
I should add the Laptop has no problems connecting via its Gigabit LAN port.
Anything else I'm missing?
Thanks in advance.
EDIT: Dual post removed.UPDATE:
The next thing I tried was to reinstall Vista Business from recovery disc to see if this suffered from the same problem.
The wireless connection worked fine on Vista and, despite the updates that I was being offered, worked without needing to update any drivers.
This made me think...so the issue is probably XP DRIVER related.
What I have done now is backup all the driver updates I was told to download by TEMPRO (BIOS & wireless manager updates included).
I think part of the problem is that TEMPRO only works in Vista (not XP) so you are not informed of any updates that may be required if you downgrade to XP straight after purchase (which is what I did). -
Finding out devices connected to my home network (Time Capsule)
I have a mid-2013 mac pro and I am using time capsule, I suspect that I have some unwanted guests in my home network:-) how can I see devices connected to my home network?
The new TC and the new Mac OS airport utility are totally useless..
You can do it the old fashioned way with netstat scan from terminal or via the network utility (which is also now hidden so search for it).
Grab Fing for your phone or ipad.
https://itunes.apple.com/au/app/fing-network-scanner/id430921107?mt=8 -
Why won't my iphone 4 connect to my home network?
I've had my iphone4 connected to my home wifi network for about 18 months with no problems. A few weeks ago it suddenly dropped the connection and when I try to connect, and enter the password, it tries but then responds that it can't join the network.
I can connect to other networks at work and in public. There is a laptop and another iphone4 connected to the home network with no problems.
Today, I ahve reset the router (as suggested on another thread) and reconfigured the network. The laptop is connected and working but now NEITHER iphone will connect to the wifi.
Help please!
SueThanks for trying but mine hasn't. I've connected to this router before with no problems. There doesn't seem to be a reasonable explanation.
-
My 2nd Gen iPod is "unable to connect" to our home network.
I recently purchased a 2nd Gen iPod touch, but when I try connecting it to out home wi-fi network, I encounter a problem.
The wi-fi screen opens fine, and allows me to select our network. I enter the password - and then I have a problem. I've double- and triple-checked the password, and I know I have the correct code. But when I enter the code, my iPod comes up with a message that tells me it is "unable to connect" to our home network.
I've looked at other posts, and checked the troubleshoot tips for wi-fi connectivity. Nothing has worked.
Our network router is plugged in, and functioning. Every other device in the house can connect, and access the internet. My iPod is the only one encountering an issue. After unplugging and reconnecting the router, and reseting the router and the iPod's network controls, I have literally no idea what to try now.
Can anybody help me?Well I'm not sure what you have tried so far. But I also have a 2nd gen touch and when I have trouble with it...this may sound stupid but I go into WiFi in settings and turn off wifi. I then force restart by holding down the home and power buttons until the screen goes black and you see the apple logo again., then release. When it turns back on turn wifi back on and try to connect
-
We are a two iPhone family, both on the same service provider. My wires iPhone is unable to connect to the home network where as mine is! In the settings her phone has no details for the IP address etc where as mine does! I cannot even enter the details manually.
I have done resets on off and nothing? HELP!What is that and how. I have 3 airports all configured identically and connected to one router via ethernet!
A power cycle is powering down for ~ 1 minute and powering back up.
Maybe you are looking for
-
Windows 7 hangs from boot menu
Hi, my Windows 7 partition refuses to start from boot menu, system just hangs and does nothing. I've not made any changes to the disk layout, only thing I can think of is the upgrade to 10.9.4 which probably changed the recovery partition. History: -
-
I want to buy a house but scores are low.. Should I rent or try with a weaker file?
Due to a host of different reasons my credit tanked. I own that and I'm trying to fix it. The house I'm renting is going short sale and my family has to move. We just had this dropped on us. I'd love to buy this house but our scores just aren't there
-
hi TO do : Write a Blob to a local file packages used : utl_file , utl_raw working on windows not working on Solaris 5.8 Oracle :Oracle8i Enterprise Edition Release 8.1.7.4.0 - Production Issue Faced : Ora error ORA 6510 Oracle User Id :MXE OS user i
-
Hi All, To get the fisical date range is there any other routine simpler than the below mentioned routine to improve the performance. form get_fiscal_period. data: l_current_year like t009b-bdatj, l_variant like t009-periv.
-
Repeated crashing in Safari 5.1 especially when trying to download.
I can't figure out what is disagreeing with Safari 5.1. Here is the crashlog. Any thoughts? Thanks in advance. Process: Safari [5645] Path: /Applications/Internet Software/Safari.app/Contents/MacOS/Safari Identifier: com.app