ALE Internal order issue

Hi All
In ALE internal order Configuration done by BAPI Method SAVEREPLICA Business object BUS2075
No Record found in CDPOS as well as CDHDR tables.
Previously we did the change pointer global setting in bd61 now we removed the check box in Change pointer global setting. No entries found in BD52 also but still internal order moved to the destination system with out any intervention, whenever user changed the internal order which is moved to the destination system.
Please help me to stop sending the internal order data to the destination system but we need to send the changed internal order data by manual intervention.
Thanks & Regards
KRISHGUNA

No Reply

Similar Messages

  • Budgeting through Internal Order - Issues in Purchase Requisition

    Hi All,
    I have posted the issue in ERP Matyerial Management Forum also, but since this has a lot to do with CO-Internal Order, so posting the same here.
    Objective: We want to activate Commitment Update and budgeting for Capital purchases thrugh Internal Order. Budgeting is done for IO.
    For the budgeting to get activated in Purchase requisition, Internal Order tagged to the Asset should be present/seen in the PR.
    For PR with Account assignment Cat as 'A', I am not able to see the Internal order (mapped to the asset) in PR. The field 'Internal Order' in PR is coming BLANK despite the fact that the Asset used in the PR has been tagged to a valid Internal Order (of the Object Class - Investment, with Commitment update activated).
    What other setting is missing?
    Pls note the following:
    1) Account assignment cat 'A' has been set to DISPLAY CO/PP order ( T code - OME9)
    Issue is that this field in the PR is NOT getting populated at all.
    2) Commitment management, Availability Control have also been activated in the system
    . Internal Order status management has also been checked.
    Any help in this respect will be highly appreciated
    Thanks
    Gayathri

    Hi Gayatri,
    when you are saying"budgeting for Capital purchases thrugh Internal Order",how do you use account assignment category "A"?
    if your requirement is budgeting for capital purchases through IO then you should use account assignment category in respective PR.Automatically it will control budget/commitment wrt those internal orders.
    Hope this helps you.
    Ashok

  • Internal order  issue

    Hi friends,
    There is a internal order type created for Capital purchase orders. There are AUC accounts for accounting.
    How to restrict the user to use only these AUC GL accounts.
    If any one uses any other GL accounts it should give error message.
    Thanks in advance.
    NNS

    Hi,
    if you are using AUC assets in the PO, there is no way of entering GL accounts manually.
    GL account will be automatically derived by the account determination key, which is assigned to the asset master.
    Thanks,
    Srinu

  • Freegoods issue with internal order CO

    Dear Experts,
    I am facing a Problem with free goods issue,
    When I am doing sales order VA01 I am entering internal order number, once I complete the process flow it is crediting stock account (24240000) and debiting the COGS FG (50014000) account.
    When I am doing sales order VA01 without internal order once I complete the process flow it is crediting Stock account (24240000)  and Debiting the Free goods expenses account(60014010) (as per business process it is correct)
    With internal order also it should post to free goods expenses account.
    Kindly help me on this I am not able to trace.

    Hi
    Please check item category TANN settings.Also check in VTLA copy control  there is a feild "Update Cost", tick the feild.
    Please go through the links which may help you
    PGI accounting
    Regards
    Srinath

  • Issue in closing an Internal Order

    Hi SAP Gurus,
    I need assistance for closing a very old IO in SAP.
    The IO was setup with a certain profit center and cost center. The cost center is now closed.
    I tried to change the cost center to another active cost center.Now when i used t-co KO88 for settlement run = message " There is nothing to settle ".
    Using t-co KO02 for closing the IO and i get the error message  " Balance of ORD xxxxxxx is not zero ".
    So I setup the system status in SAP to TECO GMPS SETC. But i want to close this IO. What could be the issue behind this?
    Regards,
    Priyank

    Hi,
    First check whether the Line items are there or not - KOB1
    If yes, settle them first and set the status
    If no, you can directly set the status in KO02.
    KOB1 - Internal order - set maximum date and execute
    See the line items
    or
    KO02 - Menu bar -> Extras - Cost analysis
    You can ind the status
    Find the value which hasn't been settled in the below report
    S_ALR_87013015 - List: Actual Debit/Credit
    Thanks

  • Issue services with different Internal Orders within a Plant from one PO?

    Hiii... Please advice me of issuing services through one purchase order (one vendor comes and do the service to different machines of different internal orders in a plant) to different  internal orders within a plant.
    Thanks
    Manoj

    what is the problem?  you can have Multiple Line Items in a PO  (one for each internal Order).
    And within one Line item you can add multiple service lines.

  • Goods issue to internal order

    Hi...
    can any one let me know whether it is possible to issue goods from movement type 201 to internal order created in FI...
    i am tyring to issue in MB1A movement type 201, by clicking to ORDER tab but system shows an error.
    Suggestions will be worth appretiated....
    Regards

    HI 
    USING  MOVT  TYPE   TRANSCTION  CODE  201    U CAN  ISSUE   TO    COST   CENTER
    IF U  WANT ISSUE  FOR INTERNAL  OREDER  261
    KISHORE

  • Internal Order through Goods auto Goods Issue

    Hi friends
    i  create PO with acc.*** F and commitment item ,order(Internal oder) .
    vendor supplies goods i done GR through 101 . while i done GR goods automatically ISSUE to Internal Order .(contracter)
    Po qty 100
    GR qty 100
    Auto GI to Internal Order (Contracter) - 100
    now contracter return some qty - 10 to Company.
    how this 10 qty comes to SAP system and in company stock

    if u reverse or cancel GR thru MIGO; does the system automatically reverse goods issue?
    Hi sachin 
    S. when i reverse in MIGO (101) goods reverse to GI also. but the qty goes to open order stock . i want tht stock comes to in my company stock .
    how i ll come

  • Issues against Internal Order- AUC

    Dear Gurus,
    My client require the following when the goods issued against Internal Order(AUC) (MB1A, Movement Type: 261)
    The system has to post following entry 
    Consumption a/c Dr
    To Assets Under Construction a/c Cr
    How can we do that please help me.
    Reagrds
    Sreenivas.P

    Hi
    Why does the client wants to credit AUC a/c. It should normally be Inventory account.
    Normal scenario is that the costs gets debited to IO and on settling the IO it sits in the AUC asset. Then the AUC settlement is carried out thru AIAB & AIBU to real asset
    Thank You,

  • SO to PR issue with Internal order copying

    I have one issue : The SO has Internal order and Profit center information. When a PR is created for the SO it only copies PC but not IO for some SO types.
    Our client uses a Z transaction which releases the requirement + automatically updates the PR information in SO schedule lines. I feel that the requirements release is done using the standard user exit but updation of PR information in sales order is developed in the program.
    Is there any standard customization at SO type or some other place where we define which account assignments get copied from SO to PR ?

    Dear Kuppam,
    For your first issue, you have to manually push in the Internal order value in Debit memo  i.e. enhance the BADI.
    What I understand for your second issue is, PSG is populated in the Debit memo request which is a real cost object and hence system is creating PSG document when accounting and controlling document is created. If the posting is to happen to internal order then that should appear in debit memo request and then only you will see the values in internal order.Some settings are required in CRM which will resolve your second issue.
    To resolve this,please refer the SAP note 1310727 - Account assignment for CRM documents with sales items
    Hope this will resolve your issues.
    regards,
    makrand

  • Goods Issue Internal Order using MIGO

    Dear All,
    I want to do Goods Issue Internal Order using MIGO, but then an error message popup says
    "Order xxx not found or not permitted for goods movement"
    When i do the Goods Issue using MB1A, the transaction run well,
    So why MIGO transaction cannot run this transaction?
    Any one who can help to resolve this problem?
    Regards,
    Marufat

    Hi,
    Go to MB1A, enter Mvt type 261, Plant and S.loc.
    Don't click on order tab from the initial screen. This field is for "Production Order" Not for internal order.
    Then in the second screen on account assignment data, give your Internal Order number and enter the data and post the document.
    Or else, In mIGO, Goods Issue- Others.
    Check the configuration for the Order type in transaction code KOT2_OPA.
    Order Category should be 01
    If order belongs to order category 30,system will not allow to do the direct posting through MB1A.
    OR else try to create a reservation for these materials with movement type 261 and then do a goods issue for that reservation.
    Hope it will help you
    regards
    Siva

  • User exit for Internal Order SaveReplica or ALE/IDOC

    Hi,
    We're currently copying back internal orders from our PRD environment into QAS using the class method InternalOrder SaveReplica via the distribution model in BD64.
    We've extended table AUFK to include some custom fields and are populating it nicely via the user exit provided.  However, we want to include these values when we replicate the data back in our QAS environment.
    The BAPI for method CREATE contains the "EXTENSIONIN" table so I think I know what to do there, but we are using SAVEREPLICA which doesn't offer any extra fields.
    What is the best way to copy this data back into QAS?
    Would it make sense to put a user exit RFC call in the QAS system to populate the values after reading them from the PRD system at the time of saving?
    I can't find any user exits.  We are doing this based off of change pointers. 
    Would you recommend using basic ALE, doing an extension to idoc type internalorders01 or something?
    Thanks for any suggestions.

    Hi,
    usage of specific combinations of internal orders + cost elements:
    Create FI-validation rule (T-code OB28 or GGB1) using BSEG-HKONT, BSEG-AUFNR for call-up point 2. Assigne this rule to the comp. code(s) needed.
    Best regards, Christian

  • Issue with internal order postings

    Hi Experts,
    I have created one service order in CRM and created a debit memo. In this i have two issue, please help me if know the solution.
    1. Once i created the Debit memo, it was replicated in to ECC and line item wise one internal order should be created and displyed in account assignemnt tab, but it is not showing any values in the internal order field, showing as blank. when i checked in the T.Code IAOMC with CRM service order there showing internal order which was generated for the line item.
    can you please tell me which settings need to be done for displaying in sales order account assignment filed.
    2. In that Internal order the sales order values are not flowing even we done billing and accounting. In the accounting document one controling document is created which is posted the values to CO-PA.
    Can you please tell me the settings need to be done to overcome this errors.
    CAHANDU

    Dear Kuppam,
    For your first issue, you have to manually push in the Internal order value in Debit memo  i.e. enhance the BADI.
    What I understand for your second issue is, PSG is populated in the Debit memo request which is a real cost object and hence system is creating PSG document when accounting and controlling document is created. If the posting is to happen to internal order then that should appear in debit memo request and then only you will see the values in internal order.Some settings are required in CRM which will resolve your second issue.
    To resolve this,please refer the SAP note 1310727 - Account assignment for CRM documents with sales items
    Hope this will resolve your issues.
    regards,
    makrand

  • KO22 internal order budget issue

    Hello All,
    while making changes for internal order budget with transaction code KO22 the system shows a error as u201CItem order xxxxxx budget exceededu201D & for some orders u2018Item order xxxxxx budget almost exhaustedu201D & also referring to a budget for year 2006,2007,2008 . & The system doesn't accept those changes .
    Another strange thing is that  the system allows the same changes for few items  (maybe 4, 5, or six that time it will get saved that time it will not give error) ,
    but trying to do  10-15 changes , the system shows the warning message as stated above
    If anyone has encountered this strange issue please share your inputs
    Thanks & regards,
    Prashant

    Dear,
    When making changes to budget then make sure you are increasing it not decreasing....
    When you decrease the budget then system will check tolerance defined............and display warning or error....
    For e.g in tolerance you have defined that system should display warning at 95% absorption of budget and Error at 100%.
    You have set budget 10000 INR for the Internal Order. So it means at 9500 INR system will issue warning and at 10000 INR or more system will give error.
    If posted amount to order is 9000 INR so you can noway reduce budget less than 9000 INR because it is 100% and system will give error.
    Regards,
    Chintan Joshi

  • Issue While Executing the Internal Order in KO8G

    Hi,
    Whle executing the internal order in KO8G,I am getting the below error.
    Complete Allocation Structure A1   and Message no. KD503
    I have reversed/cancelled all the relevent Material documents related to that PO,even after i am getting the same error.
    Error is as follows-
    Complete allocation structure A1
    Message no. KD503
    Diagnosis
    During settlement, the system puts the sender debits into groups (assignments), which are settled using the same settlement cost element. The settlement assignment is made in the allocation structure, which is stored in the settlement rule for the sender (under settlement parameters).
    Cost element 414126 cannot be assigned to a settlement cost assignment in allocation structure A1, and therefore it cannot be assigned to a settlement cost element.
    Procedure
    Possible solutions are as follows:
    If the posting under cost element 414126 was made to the sender because of an incorrect entry, and you can reverse the posting, and do not need to update the allocation structure. You only need to reverse the incorrectly assigned posting before repeating the settlement. Exception: For an investment measure with a line item settlement, you need to extend the allocation structure, even after the reversal.
    If the posting was made correctly, you can do the following:
    a) You can assign a different allocation structure to the sender: In the master data maintenance for the sender, choose "Settlement rule -> Goto -> Settlement parameters" and then enter a different allocation structure.
    If necessary, also check whether the correct allocation structure is entered in the settlement profile. The allocation structure is defaulted in the settlement profile when you create sender master data or when you maintain the settlement rule.
    You can update allocation structure A1
    Kindly advice me how to fix this error
    Thanks
    Supriya

    Hi,
    Thanks for your reply,I have added that cost element in allocation structure.Now i am getting one more error related to this even i have maintained Receiver type FXT and settlement cost element for that.Kindly help me on this.
    Define a settlement cost element for receiver type FXA
    Message no. KD506
    Diagnosis
    In allocation structure A1 (controlling area AFCO), you did not define which cost element should be used when settling costs/revenues of the sender. Nor did you define receiver type FXA.
    Procedure
    Assign a different allocation structure to the settlement sender (-> Master data -> Settlement rule -> Goto -> Settlement parameters), or maintain allocation structure A1.
    Thanks
    Supriya

Maybe you are looking for