All Files in Sharepoint Designer

Hi
We have managed to create some environments for different teams to work on projects in Sharepoint 2010.
Now, in Sharepoint Designer, if I open the Production Site, there is a folder named 'pages' in the All Files Section.
However the Lab Environments do not have this folder as in the Production Environment.
Can anyone please guide me on how to copy the Files from this folder to the other dev environment.
Thanks
Regards
Santosh
Santosh

In the pages library its not actually the files that are important. Its the metadata attached to the files. That metadata is displayed using page layouts that are in the page layouts and master pages gallery of the root side of the site collection.
Assuming that you are using the same page layouts in both environments you just need to copy the metadata from the one library to the other. There is no simple built in way to do that from one VM to another. You'll need to backup the site
collection and restore it.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Similar Messages

How to enable "All Files" in SharePoint Designer 2010

Hi everyone,
How can I enable "All Files" in my sharepoint designer.In home laptop I see it,but in production environment where I work,opening SharePoint Designer I can not see "All Files" button.I am with admin account and everithing is ticked in the central administration
Designer options.
Thanks in advance.

Hi ,
I noticed that you said you can see the ‘All files’ folder in home laptop ,but it is missing when open in the production environment .Did this happen to
all the sites or the site in the specific web application ?Have you extend the web application into an Internet zone?
Actually you should change the SharePoint designer settings in both Central Administration and Site collection settings .Perform an IIS reset after change
the settings and reopen the site in SharePoint designer.
For more information about SharePoint designer settings ,please refer to this site :
Locking Down SharePoint Designer 2010 :
http://blogs.msdn.com/b/mcsnoiwb/archive/2010/07/01/locking-down-sharepoint-designer-2010.aspx
Thanks,
Entan Ming

SharePoint Designer workflow - update list item field without creating new version?

Hello,
I have a list that uses versioning.
I have a workflow, designed in SharePoint Designer, that will track changes in some columns, and if there is a change it will send out an email.
To track the changes eg in the Status column, I have a hidden "OldStatus" column so I can compare the current value with the previous value.
If it's different it means it has been changed, and I send out an email, then update the OldStatus with the current value so they're in sync again.
Problem I have now is that when I update the OldStatus column in my workflow it will create a new version of the listitem. I don't want that. This is a system value change and has no value at all to the end user.
In C# I can do a systemupdate to avoid this, but how can I do this in SharePoint Designer?
Please don't tell me I should write the entire workflow in code, only to get access to the systemupdate command....

I created a Worfklow Activity class, called "UpdateFieldInCurrentItemSilentMode".
I add the default context properties to work with:
#region Context properties
public static DependencyProperty __ContextProperty = DependencyProperty.Register("__Context", typeof(WorkflowContext), typeof(UpdateFieldInCurrentItemSilentMode));
[Category("My Workflow Actions")]
[Browsable(true)]
[DesignerSerializationVisibility(DesignerSerializationVisibility.Visible)]
public WorkflowContext __Context
get
return ((WorkflowContext)(base.GetValue(UpdateFieldInCurrentItemSilentMode.__ContextProperty)));
set
base.SetValue(UpdateFieldInCurrentItemSilentMode.__ContextProperty, value);
public static DependencyProperty __ListIdProperty = DependencyProperty.Register("__ListId", typeof(string), typeof(UpdateFieldInCurrentItemSilentMode));
[ValidationOption(ValidationOption.Required)]
public string __ListId
get
return ((string)(base.GetValue(UpdateFieldInCurrentItemSilentMode.__ListIdProperty)));
set
base.SetValue(UpdateFieldInCurrentItemSilentMode.__ListIdProperty, value);
public static DependencyProperty __ListItemProperty = DependencyProperty.Register("__ListItem", typeof(int), typeof(UpdateFieldInCurrentItemSilentMode));
[ValidationOption(ValidationOption.Required)]
public int __ListItem
get
return ((int)(base.GetValue(UpdateFieldInCurrentItemSilentMode.__ListItemProperty)));
set
base.SetValue(UpdateFieldInCurrentItemSilentMode.__ListItemProperty, value);
public static DependencyProperty __ActivationPropertiesProperty = DependencyProperty.Register("__ActivationProperties", typeof(SPWorkflowActivationProperties), typeof(UpdateFieldInCurrentItemSilentMode));
[ValidationOption(ValidationOption.Required)]
public SPWorkflowActivationProperties __ActivationProperties
get
return (SPWorkflowActivationProperties)base.GetValue(UpdateFieldInCurrentItemSilentMode.__ActivationPropertiesProperty);
set
base.SetValue(UpdateFieldInCurrentItemSilentMode.__ActivationPropertiesProperty, value);
#endregion
Then I add my own input parameters to work with:
public static DependencyProperty StaticFieldNameProperty = DependencyProperty.Register("StaticFieldName", typeof(string), typeof(UpdateFieldInCurrentItemSilentMode));
[Category("My Workflow Actions"), Browsable(true)]
[DesignerSerializationVisibility(DesignerSerializationVisibility.Visible)]
public string StaticFieldName
get
return Convert.ToString(base.GetValue(StaticFieldNameProperty));
set
base.SetValue(StaticFieldNameProperty, value);
public static DependencyProperty FieldValueProperty = DependencyProperty.Register("FieldValue", typeof(string), typeof(UpdateFieldInCurrentItemSilentMode));
[Category("My Workflow Actions"), Browsable(true)]
[DesignerSerializationVisibility(DesignerSerializationVisibility.Visible)]
public string FieldValue
get
return Convert.ToString(base.GetValue(FieldValueProperty));
set
base.SetValue(FieldValueProperty, value);
Then the actual workflow action code:
protected override ActivityExecutionStatus Execute(ActivityExecutionContext executionContext)
try
if (this.__Context == null)
throw new Exception("__Context is NULL");
if (this.__Context.Site == null)
throw new Exception("__Context.Site is NULL");
//reload the web using the SPSite object to work around any limitations on the objects
//applied to the user running the workflow
SPWeb tmpweb = __Context.Web;
SPSecurity.RunWithElevatedPrivileges(delegate()
using (SPSite site = new SPSite(tmpweb.Url))
using (SPWeb web = site.OpenWeb())
//load list
SPList lst = web.Lists[new Guid(__ListId)];
//load listitem
SPListItem item = lst.GetItemById(__ListItem);
//update field value
item[this.StaticFieldName] = this.FieldValue;
//commit changes
item.SystemUpdate();
//return success workflow status
return ActivityExecutionStatus.Closed;
catch (Exception exc)
string sMsg = "Error in 'UpdateFieldInCurrentItemSilentMode':" + Environment.NewLine
+ exc.Message + Environment.NewLine + Environment.NewLine +
"StaticFieldName: " + this.StaticFieldName + Environment.NewLine +
"FieldValue: " + this.FieldValue;
Common.WriteErrorToLog(sMsg);
//return failed workflow status
return ActivityExecutionStatus.Faulting;
Note: the WriteErrorToLog function is a custom function that writes the error to the event log. It's located in another class. You can replace it with your own error handling approach.
Then we need to specify the workflow action in the .actions file, so SharePoint Designer knows about it and which parameters are required:
<Action Name="Set field in current item (silent mode)"
ClassName="My.WorkflowActions.UpdateFieldInCurrentItemSilentMode"
Assembly="My.WorkflowActions, Version=1.0.0.0, Culture=neutral, PublicKeyToken=0f8d2d9e2dfb2160"
AppliesTo="all"
Category="My Workflow Actions">
<RuleDesigner Sentence="Set field %1 in current item to value %2 (silent mode)">
<FieldBind Field="StaticFieldName" DesignerType="ParameterNames" Id="1" Text="StaticFieldName" />
<FieldBind Field="FieldValue" DesignerType="ParameterNames" Id="2" Text="FieldValue" />
</RuleDesigner>
<Parameters>
<Parameter Name="StaticFieldName" Type="System.String, mscorlib" DesignerType="ParameterNames" Direction="In" />
<Parameter Name="FieldValue" Type="System.String, mscorlib" DesignerType="ParameterNames" Direction="In" />
<Parameter Name="__Context" Type="Microsoft.SharePoint.WorkflowActions.WorkflowContext" Direction="In" />
<Parameter Name="__ListId" Type="System.String, mscorlib" Direction="In" />
<Parameter Name="__ListItem" Type="System.Int32, mscorlib" Direction="In" />
<Parameter Name="__ActivationProperties" Type="Microsoft.SharePoint.Workflow.SPWorkflowActivationProperties, Microsoft.SharePoint" Direction="Out" />
</Parameters>
</Action>
That is all you need for the specific code, the rest is common code to build custom workflow actions, which you can find on many blogposts or this forum.

SharePoint Designer 2010 and Visio 2013 Issues

I currently have Visio 2013 and SharePoint Designer 2010 installed. I have two problems that I'm experiencing and any help would be greatly appreciated.
1. I'm able to export an already manually created workflow from SharePoint Designer 2010 as a .vwi file without a problem and am able to import the file into Visio Pro 2013. I
was also able to export the file from Visio once changes were made. However, when I go to import the file into SharePoint Designer I receive a message stating "This workflow cannot be imported because it was created in SharePoint Designer for a
different site, or the original workflow has been moved or deleted. To move a workflow between sites, use Save as Template (.wsp file) instead of Visio workflow drawing." I cannot figure out how to save it in the format the prompt is suggesting
as this is not available from the list of Save As options from Visio and when exporting from Visio the only format to do so is as a Visio Workflow Interchange (.vwi file). When exporting from SharePoint Designer I’m only able to export as a .vwi file
and the Save As option is not available in SharePoint Designer. Additionally, the file location where I exported from SharePoint and importing back into SharePoint is not changing, nor is the file name.
2. If I create a workflow from scratch within Visio utilizing the SharePoint 2010 shapes, I'm about to export without a problem and save as a .vwi file. I'm also able to import this workflow into SharePoint Designer, but the problem is the workflow
never actually shows up and I do not receive any errors.
Any help on either or both of these issues would be greatly appreciated.
Thanks,
Eric

Use Visio 2010. You may be running into a compatibility issue between Visio 2013 and Designer 2010.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Sharepoint Designer 2010 and Visio 2013

I am testing out Visio Professional 2013. I can import a VWI file from Sharepoint Designer 2010 and I can export a VWI file from Visio. But when I try to import the VWI file created in Visio 2013 into sharpoint Designer 2010 it appears to work, as
I don't get an error, but the work flow never appears. Any thoughts?

Hi,
Based on my research, if it is SharePoint Designer 2010, then the only edition that supports SharePoint workflows is Visio 2010 Premium edition.
And if you use Visio 2013, then it need to use SharePoint Designer 2013.
Reference from:
http://social.technet.microsoft.com/Forums/en-US/visiogeneral/thread/dc58f61f-1e93-4d2e-935f-bb665296611c
Jaynet Zhang
TechNet Community Support

SharePoint Designer 2013 cannot access workflows in Office 365 Site

I have an Office 365 SharePoint site with a number of workflows that I have created on my machine with SPD 2013. After a number of weeks I was unable to access the workflows from my machine through SPD (while still being able to access pages, site assets
etc.), getting the following error: (Am restricted from submitting images)
"Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities"
Restarting SPD doesn't help, after clicking OK I get the "SharePoint Designer cannot display the item" screen, prompting me to refresh.
When I do refresh, I get the following:
"Windows Workflow Foundation, part of .Net Framework 3.0, must be installed to use this feature"
This is happening on my machine, Windows 7 64 Bit, SPD 2013 64 Bit, but on a colleague's machine, Win 7 64 Bit, SPD 2013 64 Bit I can access the workflows.
I get the same error if I try to create a new Workflow on my machine but I can create it on my colleague's machine.
I downloaded SPD 2013 on a 32 bit laptop I have access to, in which I can create a workflow. One existing workflow can be accessed, updated etc. with no issue, one opens to a prompt to "Insert a stage" and one tells me that it "Failed to load
the workflow definition for the workflow", then the "SharePoint Designer cannot display the item" screen. All of these workflows can be accessed from my colleague's machine.
Here are the actions that I have taken to date on my own machine:
Cleared the caches multiple times
Checked for updates
Installed .Net Framework 4.5
Re-installed .Net Framework 4.0 (which contains 3.0)
Uninstalled and re-installed SPD 2013
Due to issues with a workflow on the site I am in contact with MS Support who are aware of this issue, they sent me a link to a hot fix that was already installed but they have no concrete idea of what might be going on.
I was convinced that it was an issue on my machine, but I don't know what the issues that I have seen on the 32 bit SPD on the new laptop mean.
I have been searching the internet for a fix with no success, I would appreciate any help.
Thanks
Mick

Hi,
According to your post, my understanding is that SharePoint Designer 2013 cannot access workflows in Office 365 Site.
There was an issue recently when a service release was implemented that incremented the version number in the HTML header on some SharePoint online sites to '16' when SPD was expecting '15'.
I suggest to install internet explore 10 and install a patch for IE10. Then test with "open with windows explore" then opened in SPD from sharepoint online.
In addition, I suggest that in SPD go to Account > Switch Account and type in the credentials of the site you are trying to open (it defaults to your Microsoft Login).
If the issue persists, to troubleshoot this issue, you can uninstall all versions of SharePoint Designer on workstation, clear cache and then reinstalling the latest SharePoint Designer. For the detailed information, you can refer to the
article: http://support.microsoft.com/kb/2794961
Here are two similar threads for you to take a look at:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/15fd1436-3166-4e43-8b22-cdb480091548/cant-open-sharepoint-online-site-in-sharepoint-designer-2013
http://community.office365.com/en-us/forums/154/t/149314.aspx?PageIndex=2
By the way, you can also post the question in Office 365 forum and more experts will assist you.
Office 365 forums
:http://community.office365.com/en-us/forums/default.aspx
More information:
SharePoint
Designer 2013: Server-side activities have been updated:
http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
Best Regards,
Linda Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

"An error occurred accessing your Microsoft SharePoint Foundation site files" connecting site with SharePoint Designer

I have a SharePoint 2013 environment with 1 AD Server, 1 DB Server and 1 APP Server, with 13 Web Applications running under the SharePoint.
Recently I rebuilted the application because of some infrasctrucutre problems, and I was able to solve all of them, except one. I can't connect to any of those 13 Web Apps with SharePoint Designer. When I try to connect, it always ask credentials, then it
seems like loading the site, then the error appears:
"An error occurred accessing your Microsoft SharePoint Foundation site files. Authors - if you are authoring against
a Web server, please contact the Webmaster for this server's Web site. WebMasters - please see the server's application event log for more details."
I've spent hours troubleshooting it, but none of the information I found was valid. I've already tried to clean the cache, but didn't work. I found plenty of related data of this
error with FrontPage and old versions of SharePoint, but nothing helped. All the Web Apps are SPD-Enabled at Site Collection Administration. I've tried connecting from many different PC's. The 15/LOGS folder doesn't get any data from this error, neither the
Event Viewer.
I really don't know what else to do. Please Help!

I found the answer of my issue was in a .NET Agent installed by NewRelic on the server. I found a connection trouble with Fiddler, then I end up figuring this out:
This can be the result of Real User Monitoring so the first step in troubleshooting would be to disable it and see how it affects the application. The .Net Agent injects snippets of javascript into the header of pages sent to the users browser to measure the
page load time on the user's end.
You can disable RUM by editing newrelic.config and changing this line:
<browserMonitoring autoInstrument="true"/>
to this:
<browserMonitoring autoInstrument="false"/>

Sharepoint foundation 2010, All Files missing

I'm using SharePoint designer 2010 with SharePoint Foundation and I'm trying to rename a URL of a list. I saw online that I can do this under All Files, but I don't have that available. Is this a limitation of using Foundation? Or are there some permission
settings I might need to change?

Hi ,
I have a test on my machine :rename the list name under the All Files folder can change the url of the list .
1.
As for the All files folder ,you can set it to appear in Central Administration :General Application settings>Configure SharePoint Designer settings>Enable Managing the
web site URL structure .This will allow the All Files to show up .
2.
You can also configure it in site collection level :Choose Site Actions>Site Settings>SharePoint designer settings .In addition ,only the site administrators can see
the All Files folder .
Thanks,

Unable to download exe files after unblocking, 404 error. handler mappings execute change prevent infopath, export to excel, and sharepoint designer from working.

I removed .exe from the block list, checked MIME types, all ok,
I followed this solution: http://social.technet.microsoft.com/Forums/en-US/sharepoint2010setup/thread/b380a13e-a15f-4e32-98cd-12747538ad20?prof=required
( go into IIS (I am assuming IIS 7.0) and select the particular web site and click
handler mappings and Edit feature permissions and
uncheck the Execute box .)
It works, I can now open exe files. But it causes other major troubles so far:
-Cannot Export Lists to Excel
-Cannot Publish and Save InfoPath forms
-Cannot edit subsites in SharePoint Designer.
Does anybody have another solution that won't disable other features? What is the best way to do it? I have SolidWorks Edrawings in .exe that needs to be accessible.
Thank you.
Guillaume Gagnon, MCP Senior System Administrator Forensic Technology WAI Inc.

Hi Guillaume,
As you know, if we remove the Execute permission for handle mappings, we will be able to download .exe file from SharePoint server. But as you said, this will cause other issues.
The another solution to allow to download .exe file is remove the CGI-exe handle mapping from the handle mappings directly. You may need to restart Internet Information Server(IIS). After that, we will be able to download .exe file directly.
Open the IIS manager
Select the site from the "Sites" tree
Double-click "Handle Mappings"
Right-click "CGI-exe", and then click "Remove"
Thanks,
Jin Chen
Jin Chen - MSFT

Need JavaScript for Sharepoint Designer 2010, to show a Pop-up to all the users between date range and the redirect the site

Dear all,
I am very new to Sharepoint designer 2010. Its better to say, i am just stepping in.
I have sharepoint site which is accessible for all the users to update few information. But i want this site not to be accessible during a date range, say from 15th to 20th of every month.
I am planning to have something like this: If any user tries to access this sharepoint site between 15th to 20th date range of everymonth, then the browser must show an pop-up alert saying "This site is not accessible during this date range" and Redirect
this sharepoint site to someother site (Say http:// somesitename.xx.com) immidiately.
I know very little about how to add Javascript in sharepoint webpart.
Please provide the Javascript or any best alternate solution to my concern.
Thanks in advance.

Hi,
From your description, my understanding is that you want to redirect sharepoint site to another site between 15th and 20th every month.
I agree with what Sudip says. If you still want to use JS code,You could try these steps
below:
Open your site with SharePoint Designer.
Click Master Pages in left navigation.
Find file v4.master, and backup it(it is very important).
Right click your v4.master,
choose "Edit File in Adavance Mode".
Add the code below into the <head/> tag.
<script src="https://code.jquery.com/jquery-1.11.1.min.js" type="text/javascript"></script><script
type="text/javascript">
$(document).ready(function(){
var today = new Date();
var day = today.getDate(); // get current day
var id = _spPageContextInfo.userid; // get the id of current logon in user
var boolFlg = false;
$.ajax({
   url: _spPageContextInfo.webAbsoluteUrl + "/_api/web/SiteGroups/GetByName(\'"+"sharepoint Owners"+"\')/Users", //get users in a specified group can access the sharepoint site from 15th to 20th every
month
   type: "GET",
   headers: {"accept": "application/json;odata=verbose"},
   success: function (data) {
      if (data.d.results) {
         var src = data.d.results;
         for(var i = 0; i < src.length; i++){
            if(src[i].userid==id){ //check the logon in user in the specified group or not
               boolFlg = false;
               break;
         if(!boolFlg){
            if(day <= 20 && day >=15){
                alert("This site is not accessible during this date range"); // alert the message
                location.href = "http:// somesitename.xx.com"; // redirect to another site
   error: function (xhr) {
      alert(xhr.status + ': ' + xhr.statusText);
})</script>
Best Regards
Vincent Han
TechNet Community Support

SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory

SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory
after retry..again SharePoint Designer requires the following component require to install Microsoft.NET framework version 4 i have downloaded and try to installed but fail not work please answer what to do?
Thanks and Regards, Rangnath Mali

Hi Rangnath,
For running SharePoint Designer 2013, you need to install Microsoft .NET 4.0 Framework or higher.
Please uninstall the Microsoft .NET 4.0 Framework, and install it again. After that, reboot your machine.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Using sharepoint designer 2013 - connected to sharepoint online - but getting " data source file cannot be saved" after making a new linked datasource

using sharepoint designer 2013 - connected to sharepoint online - but getting " data source file cannot be saved" after making a new linked datasource

Hi,
Based on your description, I have done a test and I can’t reproduce your issue.
I have used SharePoint Designer 2013 to open a SharePoint Online site and there are no issues.
I’d like to clarify whether you encounter any issues when accessing SharePoint Online sites. If there are no issues during the accessing procedure, SharePoint Online service should be working fine at your side. The issue may be caused by specific SharePoint
Designer client or network. I suggest you refer to the following steps to troubleshoot the issue.
1. Use SharePoint Designer to open another site and check whether it is successful.
2. When you are prompted to enter Office 365 account and password, try other users’ accounts and select the remembering the credential.
3. Perform the connection procedure under another environment and verify whether the issue is resolved.
If the issue persists, can you provide related screenshots for further troubleshooting?
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Web part created on a subsite for a sharepoint list in another site using sharepoint designer, to show only the subsite's reports. Connection dropping off and showing all the reports

I crated web parts in the sub-sites (we have about 10 subsites) using sharepoint designer from a main list in another site. Then used web part to show only the ubsite's reports - using connection to the main list. Problem is, the connection
is dropping off and showing all the reports on the main list that are confidential. this has happened 3 time lately. Could someone explain why it happens some times? I had to fix it by adding the web part again and connecting it
Thanks, Subathy.

Hi George,
If you want to use a top level site "department" list column in all sub-sites, you can go to top level site and create a
lookup type "Site column" to look up the value from the department list, then all sub-sites can use this lookup type site column created in top level site.
Thanks
Daniel Yang
TechNet Community Support

I have a 27" iMac with 16GB of factory installed SDRAM and 1T harddrive. It is telling me the harddrive is full and is not functioning correctly. How can I adjust so that all files are managed on the harddrive rather than the SDRAM. (BTW - design flaw)

Processor 3.4 GHz Intel Core i7
Memory 16 GB 1333 MHz DDR3
I have a 27" iMac with 16GB of factory installed SDRAM and 1T harddrive. It is telling me the harddrive is full and is not functioning correctly. How can I adjust so that all files are managed on the harddrive rather than the SDRAM. (BTW - design flaw here.)
Older Macs with a single Harddrive would simply expand OS management on the drive, and I think I understand the new Fusion Drive to do just that, but how do I get this product that I spent a great deal of money on to be more than a pretty screen?

I was confused by this statement
It is telling me the harddrive is full and is not functioning correctly.
OS X manages ram and when you run out, it create swapfiles to extend your ram on the HDD (Hard Disk Drive). The OS itself, takes about 16 gig of space and that too resides on the HDD. Your 16 gig of RAM is really a temporary space that holds things from the HDD so the processor can work on them. There is no design flaw between your ram and HDD. Something else is going on and there are a lot of smart people here to help you figure out what that "something else" is.
I would do three things. First I would create a backup, backups are important. Second, I would reboot into recovery and repair my HDD. Lastly while still booted in recovery I would repair permissions.
Can you capture a screen shot of the exact error you are getting?

Display an XML file Content as a treeView in a SharePoint 2013 custom form edited with SharePoint Designer 2013

Hello everyone,
Within a list form, user has to select a value amongst a huge number of availables options.
Instead of using something like a dropdown list, which would be very boring to parse, I would like to display possibles values in a treeview.
To do that, I tried to use an <Sharepoint:SPTreeView bind to a SharePoint:SPXmlDataSource who read data from an XML File.
<SharePoint:SPXmlDataSource runat="server" DataFile="../../SiteAssets/App_Data/myfile.xml" AutoSave="True" XPath="" ID="myDataXml"></SharePoint:SPXmlDataSource>
<SharePoint:SPTreeView runat="server" ID="MyTreeView" DataSourceID="myDataXml" />
But when I try to display the form in my web browser, an error occurs.
Therefore, my question is : Is it possible to display the content of an Xml file as a treeView in a SharePoint 2013 custom form edited with SharePoint Designer 2013 ?
If the answer is yes, how ? Which are the required properties for "SharePoint:SPXmlDataSource" tag and "SharePoint:SPTreeView" tag ?
What are the requirements to use thoses tags ?
Regards,
Florian.
Ps : I dont have access to the server side of the SharePoint site I am working on.

Assuming that https://fullsitename is a new URL address did you make sure to update your browser to include it in the Trusted Sites zone? The message you are quoting is exactly the one you get if you don't have it in Trusted Sites.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

All Files in Sharepoint Designer

Similar Messages

Maybe you are looking for