All sort of technical issues. Huawei Y550

A week ago I bought Pay as you go (international phonecals) sim card with Huawei Y550 phone. Since then each day I'm experiencing all sorts of technical/network issues with it. Few examples: 1. At the second day I've received 468 text messages from EE asking for top up, all sent within 2 hours.2. 4G didn't work right from the start, there was no internet connection despite of small 4G icon showing up on the right corner - I've restareted my APN and everything went back to the norm.3. At the fourth day I've received over 300 text messages from EE asking about top up4. At the fifth day I've noticed that each phonecall or text messages I have made, are showing on my online account multiplied - each of them exactly 19 times.5. At sixth day (yesterday) I couldn't make any phonecalls, each time I've dialed any number I was told that I have not enough credit to do it - despite of still having over 400 minutes available as according to my online account.6. Today morning I can make phonecalls ( it just fixed itself, I haven't done anything), but 4G is not available again and I can't get internet access. I'm pulling my hears now trying to understand what is happening, Can anybody explain that to me and give me some advices please? Thank you.Peter.

I think with this your best option is to call Customer Services and explain the above.

Similar Messages

I am trying to use a Futek load sensor example and am running into all sorts of weird issues with the coding.

Eons ago, when I took the Labview I & II courses, I remember the instructor stating that correct VI's had to have error line. I downloaded this VI example from Futek's website and the code doesn't use it. I am trying to utilize it for some data collection rather than have to pay for their software that goes with the sensor. When I first try to run the VI I get an error, and if I replace the formula they use, then undo the replacement it appears to work. The engineer that I am trying to help out is basically wanting to be able to read and also write a file during test, and I am running into all sorts of problems.
If anyone could help me I would greatly appreciate it.
Attachments:
FUTEK LabVIEW 10 Example 2.3.2003.3.vi ‏645 KB

The first error when I start to run the VI, is states that I need to insert disc 1 of Labview.
I can usually hit stop and run, stop and run, and then it will start "working".
Then I get the Formula: Library version is incompatible with XNode version.
If I replace the fomula, and then undo replace it will correct the broken start arrow.....
I took the labview 1 and 2 courses 5 years ago, and haven't been a regular user so I am what you would call extremely rusty.
I have an engineer here that is wanting to use the sensor for some testing and can't really understand why I am having so many issues.
Do you know if NI has someone that might be able to work through this with me, or even if there is some Labview consultant that can be paid to help out?
Thanks,
Josh

I'm having all sorts of connection issues on a iPhone i brought in the uk 6 months ago. am i able to use a genius bar abroad as I'm not returning to the uk?

i brought a iphone 5 back in feb/march and since then its slowley getting worse and worse, my wifi hardly pickes up any signals and when it does they drop out all the time. my girlfriends iphone4 picks up and has no trouble holding onto the wifi, whilst sitting at the same table mine shows no signals. Im not returning to the uk any time soon so i want to know if its possible to visit an apple store for replacement abroad? im only 6 months into my apple care so i wouldnt think this should pose an issue. any help would be fantastic
many thanks

they will not repair the device in the us you must send it back to the country of purchase or set up repair through them the uk apple car number is as follows (44) 0844 209 0611*** you should be able to set up a mail repair through them

TS3297 I keep getting the error 306 cannot connect to the iTunes Network when downloading songs on iTunes. I've tried all the troubleshooting steps from the forums and my technical issues are still unresolved. I have Windows 7. Please help!!

I keep getting the error 306 cannot connect to the iTunes Network when downloading songs on iTunes. I've tried all the troubleshooting steps from the forums and my technical issues are still unresolved. I have Windows 7. Please help!!

iTunes Store loads partially or returns "Error 306" or "Error 10054"
Proxies, parental control settings and software, security or filtering software, or a bad iTunes Store cache can cause this.
To address proxies, Remove Internet Options proxy settings ( http://support.apple.com/kb/TS1490 ) and connect to the Internet without a proxy.
To reset iTunes Store cache:
In iTunes, choose iTunes > Preferences (Mac) or Edit > Preferences (PC).
Click the Advanced tab.
Click the "Reset cache" button.
Click OK and see if the issue is resolved.
Adjust Parental Controls in iTunes:
Open iTunes.
Access iTunes preferences:
On a Mac: From the iTunes menu, choose Preferences.
On a Windows PC: From the Edit menu, choose Preferences.
Click the Parental Controls tab.
Remove restrictions on Parental Controls.
For more information on parental controls or content filtering software, see iTunes 10.5 for Windows: May see performance issues and blank iTunes Store.
http://support.apple.com/kb/TS4123?viewlocale=en_US

Is there an update to iOS 6? I've been having several technical issues since the upgrade. Uncontrolled zoom of the entire screen, Siri taking 25 seconds to respond and not recognizing names, locking up of the phone. All requiring a reset.

Is there an update to iOS 6? I've been having several technical issues since the upgrade. Uncontrolled zoom of the entire screen, Siri taking 25 seconds to respond and not recognizing names, locking up of the phone. All requiring a reset.

I would restore with backup and if that doesn't fix it try as new
http://support.apple.com/kb/HT4137

HI. ... Anyone know of any issues with using Logic Pro music software with Mountain lion OS.. I have heard rumours in the past is that all sorted now?

HI. ...
Anyone know of any issues with using Logic Pro music software with Mountain lion OS..
I have heard rumours in the past is that all sorted now?

At least Logic Pro 9 and Logic Pro X work correctly in Mountain Lion. Furthermore, Logic Pro X requires the latest OS X Mountain Lion version

How to sort out different issues on Satellite A505-S6973

Can anyone tell me, if the warranty period on my laptop has not passed, can i return my laptop to toshiba and have all my issues sorted out. Would there be a cost to do whatever repairs software related needs be done and how i am supposed to go about it because my laptop is beginning to have all sorts of little errors, i noticed that my harddrive has 156gb used although i have about 60 gigs in use.
A couple multimedia buttons aren't working but i touch them, my touchpad doesn't turn off with the hard button unless i turn it off using the FN key and my processor runs low but when i use a program i see it's reaching between 85 to 100% utilization.
I really like this laptop, but the issues i'm having i highly doubt it should operate this way.

Hi mate
Software issues are not covered by warranty!
This means that you will have to pay for everything if the ASP technician would not find any problems!
This is why you should recover the notebook in order to check if its only a software related issue.
>A couple multimedia buttons aren't working but i touch them, my touchpad doesn't turn off with the hard button unless i turn it off using the FN key
Reinstall the VAP (value added package) and flash cards utility
>my processor runs low but when i use a program i see it's reaching between 85 to 100% utilization.
This is not a bug or hardware problem. You will notice this CPU behavior because the CPU supports an feature which helps to save the power and reduce the heat dissipation

All sorts of glitches with VW Palm Pixi Plus

Hello,
I am curious if there is something inherently wrong with my phone, or if these are glitches within WebOS itself.
I have had all sorts of glitches happen over the past month or so and some are quite an issue, especially when I really need the phone.
Some of the glitches I can remember are as follow:
1. Music player cause the phone to freeze when I clicked on a song. Had to reset
2. I attempted to open google maps many times last night, when it would say I don't have an internet connection, even though the 3G logo was in the upper right corner. I had to do a reset. This was a major issue since I really needed directions at the time.
3. All the settings and SSID name info and passphrase in the Mobile Hotspot app disappeared last night and I had to reinput it all.
4. Sometimes I notice the phone is automatically restarting. This happened manny times when I first received the phone, but VW gave me a new battery, which fixed it. This feels more like a software issue now because it does it when it is just sitting on my desk.
5. One day, I could make phone calls but I could not hear anything coming out of the speaker and later, the recipient informed me they could not hear me, even though the call connected. I tried, at the time to do a restart, which did not fix the issue. I then did a **bleep** down and removed the battery, which did not work. I did a battery swap (put the battery back in) a second time and finally the phone began working again.
6. This has happened two times now, which is actually pretty creepy. One day the phone received a called and I heard this weird mid-pitch woo sound come out of the speaker. I did not know what was making the noise when I realized what it was, my phone was trying to ring. I picked up the call and was able to talk. This also happened yesterday in one of my classes where the phone was on vibrate (the vibrate switch was on), and I was connected to the Mobile Hotspot app. Out of nowhere, I began receiving a phone call and this same eery noise came out of it. I was under the impression when using the mobile hotspot, I would not be able to receive calls. The noise was piercing and odd, and I had to hit ignore, where the caller left a voicemail. Now, when in a situation where I cannot have my phone ring, this concerns me because the phone has a mind of its own. Additionally, I do not want to turn my phone off all the time to avoid ringtones, because it takes WebOS almost 3-4 minutes to boot up on the pixi, probably because it has a slow processor.
7. There has been numerous issues with using my bluetooth headphones (A2DP). Sometimes when I connect the headphones and turn on the bluetooth on the phone, they connect fine, but I cannot hear any sound from the headphones nor the speaker on the phone. Sometimes after I have been on a call using the headphones as a bluetooth headset, when I go back to the music, I cannot play music at all on the headphones.
Overall, I feel these glitches are worth it because I think WebOS is far superiour to Android, and I think it is a great product, but these issues are starting to become an inconviense and I am not sure how to proceed. I know the phone may be under warranty, so I may need to call Palm, but I figured I would reach out here first and get a concensus of the issues to see if it is something I can resolve on my side first.
I am running the latest OS, which I think is 1.4.5, which I updated a few weeks ago. Some of the issues above happened before the update and some after.
Thank you for all your help,
Tim
Post relates to: Pixi Plus p121vzw (Verizon)

I appreciate the help.
Another issue I forgot to mention was with the email client. With my gmail account, it only shows 5-10 emails but I can keep scrolling like there is more emails. Additionally, I can actually click on the empty spaces and emails will show up. It is like the title and email info are not being shown in the preview (inbox) window. The irony is I also have a school account, which is hosted by gmail with a different domain, but all the emails show up fine. I even deleted the gmail account and re-imported it and the contacts, and the problem persists.
Regardless though, last night a new issue began. My vibrate ringer switch is malfunctioning. What is happening is when I turn on the ringer (put the switch in the off position), the switch does not fully close, where the ringer turns on for a second and then the vibrate goes back on. Even though the switch is in the up position, the switch is not closing all the way to close the circuit.
I took the case off and you can clearly see it is not catching in the lock position, or the spring is not pushing it up far enough to hold it in.
I admit, webOS is far superior than Android (I used a Droid for 6 months) but the build quality and glitches are quite a concern. I really hope they come out with some new hardware soon, because I am not sure how long I can go before I give up this pixi. I would not mind the pre, but I have read more horror stories regarding hardware. With HP now owning Palm, I am sure the hardware quality will increase and the palm universe will expand, minimizing software glitches because more users means more revenue, and more revenue means more staff programmers working on issues.
I can sort of get by webOS's shortcoming, but the hardware has to be there for me. This sucks because I am left with little options at this point (I do not want to go back to Android and who knows if the iPhone will ever come to VW, also, I am not in the mood to take on another platform as windows is in the midst of working on).
Thank you again!

HT201303 was just having this problem until today. It is now all sorted and I can explain what to do very simply and easily.

I was just having this problem until today. It is now all sorted and I can explain what to do very simply and easily.
I remembered the answers to my questions, I just forgot "EXACTLY" how I entered the text - so I had to have them reset. The easiest way is to sign in through www.appleid.com. Then on the right click the "Manage your Account" link and sign in. Easy so far right. Then, as others have said, look on the left of the screen you will see a link called "Password and Security" - click on this. Now this is where the confusion begins. Some people have a link located directly under the existing questions that looks like this "Forgot your answers? Send reset security info email to blah blah blah email . If you see this click it and it will send an email to the "Rescue Email" address that you entered when you originally entered your answers. Follow the instructions contained in this email and you are done. If you cannot remember this email address or you have since closed it, you will need to go to the Itunes Express lane and send an email to Apple requesting them to reset your answers.
HOWEVER IF YOU DO NOT SEE A THIS LINK UNDER THE QUESTIONS - this means that you DID NOT enter a Rescue email address when you originally set your questions. The only way you can now reset your Security Questions and Answers is to go to the Itunes Express lane and email Apple asking to have these reset. I have 2 apple accounts, one for myself and one for my daughter - as I did not include a rescue email I had to email apple. On both occasions, these questions were reset and an email sent to me exactly 24 hours after I sent them the request. I entered the new details, WROTE THEM DOWN EXACTLY AS I ENTERED THEM THIS TIME, entered a Rescue Email this time and I am good to go again. Simple. Now when I log in and click on "Password and Security" I do have the reset link visable. Apple support are good, they just take a bit of time to get things done, but they always seem to get there in the end. I just wish someone had taken the time to explain this somewhere else in the forum as it would have saved me much time and angst.
To get to the Itunes Express Lane go to this website www.appleid.com make sure the correct country is displayed top right, if not change it. Once this is saved go to the tabs at the top of the screen and click Support. Then halfway down the next page you will see a photo of two random people with a title of Contact Apple Support - Click this. Scroll down until you see the itunes logo, to the right of this you will see the link Express Lane for iTunes Player and iTunes Store - click on this. One the right hand side of the next page click on the link "itunes Store". On the next page click the link "Account Management" check the radio button beside "itunes store account security", select your country from the drop down box and click "Continue". Under the heading MORE OPTIONS, you will see a clickable link called email - click this. Fill in your name, Apple ID and country. Then in the text box, write "I have forgotten the answers to my Security questions, would you kindly please reset them. Thank-You". Then Click Continue, you will be given a reference number and an email is sent to your address advising that generally someone will attend to your request within 24 hours. Like I said previously, I had to do this twice and both times it was reset however it was done within about 5 minutes of the 24 hour cut off, so you will have to be patient. I know 100% that this works for Australia - I am guessing other countries should be similar. Hope this helps someone somewhere!

Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider if it comes up. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove apps from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Swipe up on the app preview card
- Press the home button when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue.

Help! My computer is giving me all sorts of errors now!

Please help me someone, my computer is giving me all sorts of errors now and I dunno what happened. The only thing I can think of is that I went to a bad site or made a bad download possibly. I'm not exactly sure what went wrong or how...all I know is that I'm getting tons of directx errors and a few other errors. I tried reinstalling the latest directx but when I do the webinstaller for it, it then pops up with this message:
" a cabinet file cannot be trusted, please verify the cryptographic services are enabled and the cabinet certificate file is valid " - whatever the heck this error means????
I'm also getting a runtime error 9000 and also somehow my openGL got downgraded from the latest to only 1.1. I reinstalled the graphics display driver but am uncertain as to if it's fixed that or not. I presume this was happening because my display driver kept crashing occasionally at random times every so often? It always recovered itself so I didn't really think it was a problem but maybe it caused all this? There's a few other errors i've gotten but I don't remember those but they haven't showed up at all for now since I reinstalled the graphics driver so i'm hoping that's fixed.
What' i'm wondering though is if I should just do a system format to refresh and clean install everything back onto my computer again to restore everything to where it was similar to being new when I first bought it to fix this issue...problem is I made a system recovery disc but then it asks me for the toshiba media recovery disk and kicks my disc out when i boot from that asking for the media disk but I dunno how to create that or if I even have the right disc made to restore windows 7 since I looked on the disk and i noticed like only 3 files and 2 folders for booting so how the heck is that going to restore win 7 again onto your computer????? And the media disc for windows 7 I still can't figure out how to make either! Where do I find the information to fix these issues or even just do a reformat and reinstallation of everything onto my laptop?
PLEASE HELP ME SOMEONE!
- I need my computer to be in working order - I need help asap because I work on websites on my computer on the internet! Thanks in advance!

Your punctuation keys are broken, making your post unintelligible.
Please post using proper sentence structure.

Hi i need help in sort in out issue in worflow in sap EDI

i sap gurus
i have two issues in sap workflow .can u guys help me out in sorting out these issues.
1) When checking out/reserving a work flow item(TC: SBWP), there is no option to display who has it checked out. When the workflow item is reserved, it is removed from everyone elses workflow list. It can happen that people put these back at the end of the day, when there is no time to work on them any longer. <b>It would be a great help to have visability to all items even if they are reserved, and to have a name associated with it to see who has it reserved.</b>
2) In the "Change Layout" option of work flow (TC:SBWP), there are dynamic fields that look like they could be assigned. Perhaps one of these could be used for the person doing the reserving, but in addition to this, i<b>t would be very helpful if customer number could also be populated in one of these fields. This would allow sales specialist to pick up work flow items by customer.</b>
thanks in advance
sam sd

Hi Sam,
As far your first requirement concerned,I don't think it is possible.
because reserveing of workitem is to prevent other users from executing it.
So you can't just have the workitems only for display in other users inbox even after someone else reserved it.It defeats the own purpose.
I would suggest you to go for a report kinda tool where you can actually help the users have the visibility.
About second one,you use tcode SWL1 to define the dynamic columns and enter the container elemet ther to have the customer number displayed.

X1 Technical Issues

Welcome to the new "X1 Technical Issues" thread. We ask that you post all of your X1 related technical issues (Audio, Set Top Box, etc.) here.
Below, you will find links to X1 Help articles that may assist you in resolving your technical issue:
Xfinity TV: Basic Troubleshooting
Find and Troubleshoot Error Codes
Thank you in advance for posting!

Like many new X1 customers, you are having signal problems. What worked for the older legacy boxes doesn't always work with X1. X1 needs clean and stable signal both incoming and outgoing.
Call in to Comcast and get a service visit set up to have your signals looked at...
lobsta wrote:
Hello, my problemstilingno picture at times, reset fixesreset 3-5 times a day due to freezingslow response to remote- up to 10 second delay or nothing, again resetunable to fast forwaRD at times on dvrfgast forwaRD won't srtop reset helpsneds reboot 3-5 times dailyruns erratically like a overloaded computer from 1991These probs maKE my x1 give me second thoughts about the infrastructure supporting it,phone caLLS on hold till I get tired and hang upCurrently unsatisfactory in it's delivering on the hype.thaNK YOU

Temporary technical issues

This is disappointing. The app was fine and streaming happily to my Apple TV during the match build up, but about 1 minute into the game it suddenly stops, and trying to log back in to the app causes a "Cannot connect to BT Sport. Sorry we are having some temporary technical issues. Please try again later. (ID004)" error.
Same error on another apple device.
Have the servers gone down, or are too many people trying to watch?
Not a great start. I wonder if it will come back online before half-time?

Yep, after signing up last night and testing the online player successfully earlier, it comes to the game now and all I am getting is either an error message or I am just being 'logged out' and bombed back to a log in screen again!

Is it possible to have a technical issue addressed...

For several years I have suffered with intermittent problems with my family's BT SMTP Mail services. Similar to another recent post, my SMTP mail is blocked on password/ID grounds even though I know the Password and ID are correct (they work on Webmail and I have made no changes to my PC, iPad or iPhone) Sometimes I can access via WiFi only, and sometimes access via 3G only - it varies, but the problem seems to be that the access is blocked because it appears to be coming from a novel route.
The support from BT is laughable - ranging from "we only support Webmail", "If Webmail works then the whole BT system is perfect so go away" to suggestions to change various port settings, none of which succeed permanently.
There is a problem with BT's SMTP service but they don't want to see it, and don't want to help. Does anyone know if it ever possible to get BT to look seriously a technical issue ?

For this problem BT in general do not give proper support.
I copy below my post on another thread.
There are several reasons why you get password rejected messages however based on the information you have supplied I have the following observations and advice.
1. The failure message incorrect in that your username and password is likely to be correct but is being rejected for another reason.
2. The most likely cause is some form of timeout.
3. Providing you have a reasonably fast connection the timeout is likely to be because your account is being accessed by two or more of your devices at the same time.
4. To stop this happening you need to do the following.
a) Do not use webmail unless you have to.
b) If you do you use webmail make sure that you sign out when finished.
c) Make sure that all your devices do not check for emails automatically but require manual intervention.
d) Use POP instead of IMAP in email clients.
e) Make sure smartphones and tablets have Email accounts Push "off "and Fetch data "manually".
5. If you have done all of the above and still get a failure then logging in and out of webmail will usually clear the problem. YOU DO NOT NEED TO CHANGE YOUR PASSWORD.

Help!! All sorts of problems with my BlackBerry

Hi everyone,
I need some help..or lots of it really! I've had my Sprint 8830 for about a year and a half to two years. Recently I've been having all sorts of issues. My call log/texts disappear which I assume is related to memory..but I have deleted many things to free up the memory on my phone. I'm also not receiving texts. People are constantly telling me they send me tons of texts and I never receive any of them! I tried sending one to my phone from another phone and it didn't go through the first 4 times, but the one time it did, my phone beeped and as I went to read the message it just disappeared! Also, my phone isn't ringing and is going straight into voicemail..only notifying me of a new message--not a missed call. I've been in my house when these things have happened so I know it's not a service area problem.
I took my phone into Sprint 3 days ago, they said they installed a bunch of updates but I'm still having problems. Help! Is it just time for a new phone?
Thanks for any help you can offer!!
Solved!
Go to Solution.

The normal minimum memory limit is considered 15mb, you have 6mb.
Do you have a lot of third party applications on your BB weather, icall,bbalerts etc?
I do not know your experience level, so if you know this I'm sorry but please read and let me
know if this applies.
Most people close the applications by pressing the escape or red key. This does not close the applications.
Each application has a CLOSE option. For instance if you are in the calendar hit the menu key (spotted key) and scroll down to the bottom CLOSE is listed. Go through each application and press close. Go into the browser press menu and options select cache operations clear all categories and hit escape it will say cleaning memory. If your device has:
Go to options - security - memory cleaning - enable it. The BB will now clean memory when idle for 5 minutes.
you will have an icon on you screen for memory cleaning make sure you press it. Make sure you use the CLOSE button each time you are done with an application.
To address the immediate needs, please read and follow the steps in JSANDERS ARTICLE :
http://www.blackberryforums.com/general-blackberry-discussion/116396-managing-your-bb-memory-lost-ca...
Once you have stabilized your phone, use JOHN CLARKS memory optimizer guide:
http://www.blackberryforums.com/general-blackberry-discussion/112029-losing-call-logs-sms-emails-opt...
If you apply these two guides and follow the steps, your Blackberry will run much smoother and dependably
Thanks
Please remember to resolve your thread.
Put the check mark in the green box that contained your answer! Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

All sort of technical issues. Huawei Y550

Similar Messages

Maybe you are looking for