Alphabetical or numerical order option for elements?

I am trying to create a 360 view for a product but when I import more than 1 image at a time I am given the issue where in the library, the files will be alphabetical order but the elements are in almost random order. This is causing issues in creating a 360 view due to not being in the proper order. I have 100 images that need to be imported and I don't want to import every image one at a time for every single product. Is there anything that can be done so I can get all the elements in proper importing order like in the library?

I reported this bug and it will be corrected in next version. For this one you are out of luck  and will have to move the layers manually. If you had acccess to a version 2, you could load your images in there, save and re-open in version 3.0.

Similar Messages

  • Error in the explosion of "order report for element" in MD04

    Hi gurus,
    On the report MD04, I try to explode the "order report for element", where you can find the tree of the bom with the mrp results to cover the materials needs, but the following error occurs:
    "Order 000001008418 possibly contains recursive BOM components
    Message no. MF331
    Diagnosis
    The order contains component reservations that could have a higher low-level code than that of the order material.
    To avoid an endless loop the requirement for this component is not included."
    As one of you suggested, I tryed to install the  Snote: 10000698, but the systeme tell me that there are no valid input to manage.
    The error related is the follow:
    "SAP Note does not contain valid correction instructions
    Message no. SCWN002
    Diagnosis
    You tried to implement corrections that are contained in an SAP Note.
    The corrections in this SAP Note are, however, not valid for the release and Support Package level of your system. This means that the error that is described in the SAP Note either did not occur in your system, or it has already been corrected by a Support Package.
    In certain cases the error cannot be corrected by an SAP Note correction.
    System Response
    The system cannot implement the SAP Note.
    Procedure
    Follow the recommendations in the SAP Note text."
    ..now, what can I do?I can find No significative instruction on the note!!
    Please help me: our client is very annoyed by this problem!
    Thanks,
    Valentina

    Dear,
    Error message MF331 'Order & possibly contains recursive BOM components' is generated in the order report.
    If the header BOM material same you are using as a component then BOM become Recursive.
    If you create a recursive BOM, you must decide whether you want to allow recursiveness or delete the component that caused the recursiveness,
    Go to CS02  BOM of that material and check the sets  recursive indicator.
    Also refer the OSS Note 839879. 161742 - Consulting note:
    Regards,
    R.Brahmankar

  • Bridge not showing images in numerical order

    I'm in Bridge CS3 .  Out of a folder full of 108 images all are in numerical order except for 6 that are out of sequence.  I double and triple checked that my filenames were all uniform except for the numbers.  What's going on here, can someone shed some light?  I'm attaching a screen capture showing items 002 - 007 out of sequence.

    According to your screenshot the filter panel shows sort by Date created. If
    you change this (click on the name or the little triangles to show the
    submenu with this option) to sort by filename (you can choose between
    ascending and descending with the other arrow) it will show the correct
    order. There are also more sort orders to choose from
    What's going on here, can someone shed some light? 

  • Sort values in numeric order in drop down menu

    Is there anyway to sort the values in numeric order-asending for the drop down menu of a particular field.
    Any ideas?
    G

    Add a property 'SORTED' and Boolean = true in BPE.
    G

  • CS6 Pantone libraries are not in numerical order

    In fact, they are random. For example, when creating a duotone, I click in the color area and I'm given a list of the Pantone colors in that library. If I click on the up arrow it gives me seven colors at a time. A reasonable person woud assume that the seven colors shown would be replaced with the next seven colors in numerical order. For example, if colors 250 through 256 are shown, a click on the up arrow should produce colors 257 through 263. It does not. Here is what I got on each subsequent click when starting at 2562: 7436, 517, 250, 7646, 243. These six numbers have no relationship to each other. Selecting a color in these libraries is simply random. You must keep clicking until ithe color you want just happens to show up. The numbers don't even go generally up or generally down. They are random. What is Adobe's problem? How to alphbetize or put numbers in order is a skill taught in elementary school. Is there anyway to make the colors come up in order? If so, why is random the default?
    Thanks,
    MHBrown

    »That is just about the thinnest skin I think I've ever seen on a company.«
    I am not an Adobe employee and as fas as I can tell Mr.Cox, who does work for Adobe but is not getting paid to help people on this Forum, would not point out some poster’s misconduct here.
    What gave you the idea you were communicating with Adobe proper on this user-to-user Forum?
    »The blame cannot be put on Pantone.«
    Wrong.
    »I question the wisdom of such a systm and THAT is bad manners? Please.«
    But you did not just ask »Why is it that …« you asked what »Adobe’s problem« is, didn’t you?
    And did you not then make remarks about the elementary school curriculum?
    Now that does not seem to have a direct connection to the matter at hand at all, so I assumed you meant that derogatively.
    Was my conclusion wrong and are you just in the habit of enriching your queries with unconnected observations for example about the system of education?
    »Really, is that an "ill-mannered" request?«
    Which sentence/s in the original post qualify as a request in your opinion?
    Also you may want to post Feature Requests on the proper Forum:
    http://feedback.photoshop.com/photoshop_family/

  • Can we perform Progress Order option from Order Header level?

    Hi,
    Can any one let me know about the basic functionality of Progress Order and on which scenario we can apply this option and also please clarify me the below doubt.
    Our Functionality as follows:
    1. Once the Order is booked then Credit Hold is applied against to the Order at the Order Header Level
    2. We are releasing the Hold from Actions tab
    3. Now we are placing the cursor at each Line Level and Progressing the Order using the Progress Order Option to fulfill and close the Sales Order lines.
    Now what my doubt is Credit Hold is applied at Order level but we are performing the Progress Order option from Level. When I try to user the same option from Order Header level system is showing the following error message “APP-ONT-251015: There are no eligible activities to be completed. There is at least one deferred or externally notifiedactivity in this workflow. Please see the workflow monitor or status window for more information” because of this I am using progress order option for each line.
    I want Progress Order option to applicable for entire Order so that I can fulfill and close all Lines at one time.
    What is the best way to Progress Order for entire Order instead of selecting each line to Progress the Order.
    Please share your views.
    Regards,
    Kevin.

    Hi Kevin,
    I am not quite sure if I understood your issue correctly but if you are using R12, there is a check box available called "Progress Workflow" on Holds definition, which will progress the entire order.
    With Regards,
    Vishal Majithia

  • Options for new MacBook Pro 17"

    I am considering upgrading to the new MacBook Pro. However, I hate the standard look and feel of the system compared to my current (all aluminum) MBP. In comparison, the system looks cheap and tacky.
    Worse, the black glass monitor has so much glare in a side-by-side comparison to my current display, that it can be an eye strain to use. Can that glass front-plate be removed or an older style display be ordered?
    The black keyboard also has a horrid cheap keyboard feel compared to my current MBP keyboard. Can the black plastic keys be replaced with the older style aluminum keys?
    I really like the power and battery of the new system, but Apple appears to have -- for the first time in years -- taken a major step backwards in the usability and human factors of this new system compared to the one previous MBP model. I am greatly disappointed and VERY torn as to whether I should spend my money to get a more powerful, but much less usable system. If I could replace the display and keyboard with the older style, the upgrade would be a no-brainer.
    So, are there any options available as to style of display and keyboard?
    THANKS!
    Jon K

    ' Whew! ... Er... Okay... Let me address your two primary and more specific concerns first:
    ' Regarding the screen: You're in luck - there is a Built-to-Order option for an "anti-glare" display which essentially gives you basically the same panel as the standard model, but ends up looking almost IDENTICAL to the previous (older) model aesthetically. In other words you get the aluminium bevel, no glass panel in front, and a matte-screen.
    ' The keyboard is another matter... As another poster mentioned there is no possible way for that to be changed due to the manner of construction. It is, however, really a non-issue to almost everyone that's spent some time with it! I've worked on the previous model's keyboard and honestly the newer keyboard is far more responsive and better for touch-typing die to the key-seperation etc. etc. Additionally, while it may take time to acclimatise, I honestly believe you'll come to prefer it aesthetically as well - the contrast to the rest of the box - all the aluminium - is quite pleasant! Methinks this is just a case of you being used to the system you've been using and struggling with the different look.
    ' Now... Moving on... I have to ask whether or not you've actually spent any time working with the new systems...? Honestly, while the older models were sturdy and had good build-quality etc. I genuinly feel that you can't compare the two - the Unibody MBPs are a cut-above - and one can feel it almost immediately once you actually work with them - opening and closing the clamshell, moving the system about, typing, adding and removing peripherals - the quality and sturdiness of these systems is unrivaled!
    ' Seriously - unless you have some strange attachment to the old Firewire 400 port (and assuming you get the anti-glare option considering your comments) - I cannot see you possibly being dissapointed with the Unibody 17-incher once you acclimatise!!!
    ' Anyways. My thoughts - given by an EXTREMELY picky person with ridiculously high standards.
    ' Looking forward to hearing back from ya!
    ~Menageryl
    -Jack of All Trades, Master of Some!-

  • Build-to-order options only available in online store?

    Hello all,
    Do guys know if the build-to-order options for the new MBP are available at the local Apple store as well? I would like to get a larger HDD, but rather not wait for shipping. Thanks a lot.
    Regards,
    Herman Lam
    PowerBook G4 1.5GHz, iBook G3 800MHz   Mac OS X (10.4.8)  

    Funny you would ask that question. I stopped by my local Apple Store today and asked the same thing. The guy at the store told me I could not upgrade the hard drive at the store but rather would need to order it online.

  • What are options for applying non-inventory costs to production orders?

    We have a non-inventory costs that need to be assigned to product produced on production orders.  There are two processes -make-to-order and make-to-stock.
    Currently we use activity rates to apply labor and burden costs to our production.  We use separate cost centers where needed to ensure that we have sufficient granularity to our activity rates applied.
    We have a few specific issues where we need to understand the options for applying costs -
    1) We have freight and duty costs related to inbound raw material that we want to assign to our final product.  The amount assigned may be either a specific amount (or a specific amount per model), or a % of the total cost on that production order.
    2) We have material on the production order bill of material that is called out by quantity and we are using discrete backflush, however we have found there are issues with the accuracy of the quantities.  We want to have this product ordered using KANBAN (bin ordering) and have the value relieved from inventory when the bin is issued to production.  The cost on the production order is envisioned to be an average amount for the product - or an average amount by model.
    3) We want to have a portion of cost for production scrap included in the cost of each product produced. (similar to freight and duty).
    In all cases- the amount can change depending on analysis from accounting regarding freight and duty costs (these fluctuate depending on the cost savings we achieve with combined loads and depending on the amount of out of country sourcing), the scrap amount may change periodically depending on the initiatives to reduce scrap on the production floor, etc.
    We currently use three activity types, labor, burden and tooling.  It is my understanding that there is a limitation in SAP that keeps us limited to 6 activity types.
    My questions are:
    Are we limited on activity types? these are an option to apply additional costs, but may not be the best option if we want to change the amount applied based on model or apply as a percentage.
    Are there other options for applying costs that we can explore? I want to be sure we take into account the various options available before we start down a specific path.
    Thank you in advance for your assistance.

    As clarification- we are using standard costing for our raw material.  We currently accumulate the incoming freight in a balance sheet account.  This is treated as part of our inventory.  We have considered using an activity type with a activity added to the BOM to apply the cost to the production order.  Then we could use the secondarly cost element data to book an entry to relieve the freight account on the balance sheet.
    Because we use standard costing- access to see production order variance is critical and must be maintained in any process we select. We also use COPA reporting- so the costing information must be able to flow to COPA for the specific orders/products/serial numbers.
    We are doing make to order (production order / sales order specific combination) but also looking at a make to stock process - so the method to apply costs must take both of these configurations into consideration.
    Rajneesh - you mentioned that I am limited to 6 activities in a work center- but does that mean I can have more than 6 activity types in SAP but only 6 activities in a work center/cost center combination?
    Thank you.

  • Numerical order of photos in Elements 6

    I want to transfer photos from My Pictures folder to named folders in Photoshop Elements 6 Organizer.
    When I Get Photos, the Getting Photos dialog shows the photos in numerical order as they are transferred.
    But when they are displayed in Organizer and moved to their named folder, they are no longer in numerical order and seem to be in order of when taken/modified etc.
    I am not interested in this or Timelines. I just want the photos in their original order.
    Is there any way of doing this?
    Tim

    >n answer to your concern, Barb, about the sequence after editing a photo from a digital camera, once the photo is edited/modified, it loses its original taken date.
    I am still concerned about the loss of the original taken date. That does not happen for my digital camera photo files that are in the Organizer.
    >now I just get a message saying that the files are not visible in Organizer. Why?
    Maybe previously you were previously working with a folder for which you had imported the photo files to the Organizer and this time you chose a folder where the photo files had NOT been imported to the Organizer.
    The folder structure shown on the left hand side of a Folder Location screen looks very similar to Windows Explorer - but it does not function the same. You can NOT use all of the folder structure that you see. When you look at the folder tree on the left side, any folder which contains at least one photo file that has been imported to the PSE Organizer has an icon superimposed on the folder image. (I am not sure how to describe this icon, so I suggest that you look at a folder where you did import photos to identify the appearance of the icon.)
    The Organizer only displays photos that have been imported to it.
    >The other thing I once saw but cannot repeat, is when I Show All in Thumbnails view, the photos were separated into folders as in the Albums. Now they are all muddled together. What did I inadvertently press?
    First, a concept. Folders are a structure of the Windows Operating System. Albums in Photoshop Elements are not the same as folder: an Album is like a list of photo files where each photo is assigned a specific position in the sequence of photos.
    The photo files that are in any specific album may or may be contained within the same Windows folders. If some photos in a Windows folder are in a specific PSE Album, other photos files in that folder may not be in that specific Album. Also, photo file abc.jpg which resides in Folder1 may be included in multiple PSE albums: yet there is still only one copy of that photo file abc.jpg.
    There is also (in recent PSE versions) a concept of a Smart Album: in this case the customer identifies some characteristics of their photos and the program automatically creates an album of the photo files that have these characteristics. Note: smart albums will not be mentioned at the photofanatic web site because they were introduced after that web site was written.
    So I can not immediately identify when the photos would be separated in to folders except when you are in the Folder Location layout of the screen.

  • Numerical Order for Photos

    Hello,
    I am trying to do one very simple thing.
    Have the photos in the timeline appear in numberical order. After all, that is the order they were taken in, I want them in that order.
    I can not find a way to do that other than by drag and drop which isn't an option. I have between 100-300 photos every time I start a new project and many projects to do per week.
    Please tell me how to do this.
    The general overview is : I have photos in Aperture and want to burn them in numerical order on to a dvd that can be played in a household dvd player.
    I used to play with them in Photoshop, then import them to iPhoto, then share them with iDVD - that all worked well for me - but with trying to introduce Aperture and eliminate Photoshop everything has gone belly up.
    I COULD play with them in Aperture and then import them into iPhoto - but when I do that - for some reason iPhoto renames the photos from say 1234 10x8 to 1234 (1) - which is hard for me to explain to my client. . .
    I would be more than grateful for any guiding hands about now - am losing whole days on this.
    Powerbook G4 17 inch Mac OS X (10.4.8)

    I have no experience with Aperture. But if the Aperture names are okay, the Import command in both iMovie and iDVD should deliver images the way you want.
    Dragging photos from a Finder window randomizes the order, but the File > Import command works as you want.
    To import more than one photo, hold down the Shift key or Command key to select the photos, then hit Open.
    Karl

  • I installed elements 12, it won't open, a screen pops up with options for e-12 and 4 other language

    I installed elements 12, it won't open, a screen pops up with options for e-12 and 4 other languages.  When I click Elements 12 a screen pops up with a red install icon, I click it and it askes for the serial number. It won't let me type in letters only numbers. I already did the serial number once. How do I get this to work? I don't want to be a programer!  

    attach a screenshot of what pops up after clicking pse 12, http://forums.adobe.com/thread/963429

  • No "show backdrop" option for liquify in Elements 11

    There is no "show backdrop" option in Elements 11. Is there another way to liquify a layer with a visible backdrop as a guide?

    Hi,
    Try using Recovery Manager to reinstall your Graphics driver as this should also reinstall the associated HDMI Audio out component - see the link below.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01868333&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • BAPI KPF6 POST PLAN COST FOR INTERNAL ORDER AND COST ELEMENT

    Hi all gurus,
    I would like to use in a custom report a BAPI/Function Module that help me to simulate KPF6 in order to post planning costs for internal order and cost element (layout 1-401).
    So the input should be:
    1) Version
    2) period from
    3) periodo to
    4) year
    5) internal order n.
    6) cost element n.
    7) value
    I found a lot of BAPI but don't know the correct one and how to use it (example how to fill the input value).
    Can anyone help me on that?
    Kind Regards

    In additio  to the previous I found the BAPI_COSTACTPLN_POSTPRIMCOST but don't know if it's the correct one and how to use it (some example fitting the my case will be very appreciated).
    If the quoted BAPI is correct.
    I tested it filling all fields as following:
    HEADERINFO:
    CO_AREA=FFCA
    FISC_YEAR=2008
    PERIOD_FROM=001
    PERIOD_TO=012
    DOC_HDR_TX='blank'
    INDEXSTRUCTURE:
    OBJECT_INDEX=000001
    VALUE_INDEX=000004 (hope this point at Interna Order)
    ATTRIB_INDEX=000000
    COOBJECT:
    OBJECT_INDEX=000001
    ORDERID=ZO53-08IMZ
    TOTVALUE:
    VALUE_INDEX=000004
    COST_ELEM=3224048
    FIX_VALUE= 200,0000
    DIST_KEY_FIX_VAL=2
    The Return table is set to 0. Nothing happens.....I suspect something related to indexstructure or index is wrong..
    Could anyone help me on that?
    Kind Regards

  • In Acrobat pro 9, I can't find staple and fold options for booklets and no matter what options I choose in the print dialogue my booklet ends up with pages upside down and out of order?

    In Acrobat pro 9, I can't find staple and fold options for booklets and no matter what options I choose in the print dialogue my booklet ends up with pages upside down and out of order? I am working on a Macbook pro running OS X 10.9.4.  Our printers are fully capable for booklets with staples and folds. Would love some help. Thank you!

    To: ~graffiti
    (This email is not intended to go on public forum -- but I wanted to respond
    to you)
    Thanks for your reply....FYI...I was trying to download from www.adobe.com on
    the specific page that has downloads of your products.    As far as the
    alternate source is concerned I am not totally sure what the capabilities it has as
    I am recovering from a hospital stay and had to send my wife to retailer to
    pick this up because I am accessing email from home until I return to work and
    need something to work now.  I don't yet have the SW.  (I would have had her
    buy the actual Adobe Pro 9.0 -- but it is a wapping $499 and change).
    Regards,
    Staurt Rednor ("Stu") - [email protected]
    ===========================================================
    Subj:   New message: "No matter what I try can't download
    Adobe Pro 9.0 or free Adobe Reader"   
    Date:   4/5/2009 7:38:17 PM Eastern Daylight Time  
    From:   [email protected]   
    Reply-to:   [email protected] 
    To: [email protected]  
    Sent from the Internet (Details)   
    SGuitar43,
    A new message was posted in the thread "No matter what I try can't download
    Adobe Pro 9.0 or free Adobe Reader":
    http://forums.adobe.com/message/1867664#1867664
    Author  : ~graffiti
    Profile : http://forums.adobe.com/people/~graffiti
    Message:

Maybe you are looking for