Issue when doing Delta loads from PSA to DSO using DTP - Pls help Urgent
Hi All,
I have done 3 data loads into PSA and from PSA, iam loading the data into DSO - by splitting that load into 3 using 3 DTPs. (Split that by Fiscal Period).
2 of the DTP loads are extracting the data from 3 PSA requests.
But, one of the DTP load is filtering on ONE PSA request.
So, we are not getting the full data into DSO.
Can some one pls help me why the DTP load is beheaving like this ???
Even though i have not given any filters for Request id, still , for one load its picking up the data by filtering on One Req ID.
Cheers,
Nisha
Hi Jr,
Sorry for late reply.
I think i found the solution, the diff between the DTP's is i ahve ticked " Get request one after another " .
I have changed it now and its working fine.
Thanks,
Nisha
Similar Messages
-
How to load a selective request from PSA to DSO using DTP?
Hi Gurus,
The PSA is having 3 requests, how to load the request number 2 from psa to DSO using DTP?
Thanks
SDP
Edited by: SDPSAP on Nov 15, 2011 7:58 PMLet us say that requests are 1,2 and 3. 1 being the first one and 3 is the last one. Now you need to load request 2 in DSO from PSA.
- create a Delta DTP
- Tick "Only Get Delta Once"
- Tick "Get One Request Only"
- Untick "Reterive Until No More New Data"
- execute the DTP, it will load request 1 to DSO
- delete this request from DTP
- execute DTP again, it will load request 2 to DSO; this is what you need.
If DSO is write optimized, you do not need to untick "Reterive Until no More New Data"; just execute the DTP, it will create 3 requests in DSO, delete first and last and you will get only 2 in DSO.
I hope it helps.
Regards,
Gaurav -
Error while loading data from PSA to DSO using DTP
Hi,
I have a Unique aplha numeric identifier of type "Char" length "32" . When I am loading the data from PSA to DSO using DTP I get the following error message:
"An error occurred while executing a transformation rule:
The exact error message is
Overflow converting from ' '
The error was triggered at the following point in the program:
GP4JJHUI6HD7NYAK6MVCDY4A01V 425
System response
Processing the data record has been terminated"
Any idea how I can resolve this....
ThanksHi,
fist check weather any special characteristics if not
check in data source under this we have fields tab check the format of a particular field format internal/external/check u choose internal format, if any check routine once
use Semantic Groups in the DTP.
Try it
Thanku
lokeeshM
Edited by: lmedaSAP_BI on Oct 20, 2010 6:44 AM -
Transformation Rule: Error while loading from PSA to ODS using DTP
Hi Experts,
I am trying to load data from PSA to ODS using DTP. For about 101 records I get the following error:
"Runtime error while executing rule -> see long text RSTRAN 301"
On further looking at the long text:
Diagnosis
An error occurred while executing a transformation rule:
The exact error message is:
Overflow converting from ''
The error was triggered at the following point in the program:
GP4808B5A4QZRB6KTPVU57SZ98Z 3542
System Response
Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level
node of the monitor:
o Transformation ID
o Data record number of the source record
o Number and name of the rule which produced the error
Procedure for System Administration
When looking at the detail:
Error Location: Object Type TRFN
Error Location: Object Name 06BOK6W69BGQJR41BXXPE8EMPP00G6HF
Error Location: Operation Type DIRECT
Error Location: Operation Name
Error Location: Operation ID 00177 0000
Error Severity 100
Original Record: Segment 0001
Original Record: Number 2
Pls can anyone help in deducing and pointing this error to the exact spot in the transformation rule
Thanks & Regards,
RajJerome,
The same issue.
Here are some fields which are different in terms of length when mapped in transformation rules
ODS |Data Source
PROD_CATEG CHAR32 |Category_GUID RAW 16
CRM_QTYEXP INT4 |EXPONENT INT2
CRM_EXCRAT FLTP16 |EXCHG_RATE Dec 9
CRM_GWEIGH QUAN 17, 3 |Gross_Weight QUAN 15
NWEIGH QUAN 17, 3 |Net_Weight QUAN 15
CRMLREQDAT DATS 8 |REQ_DLV_DATE Dec 15
The difference is either some dats field are mapped to decimal, or the char 32 field is mapped to raw 16 OR Calweek, Calmonth is mapped to Calday
Both mostly all the ods field size is greater than the input source field.
Thanks
Raj -
Historical Data with it's delta loading from PSA to ODS in 3.x model
Hello ,
I want to load the one year back historical data with it's delta's to ODS object in BW 3.x model .
So can you please give steps to load historical data from PSA table into ODS object(not from the source system).
Thnaks alot
Regards
BI BeginnerHi
Run the full load IP from PSA to ODS with selections on 0CALDAY(give one year selections)
make this full load as repair full request.In display mode of IP, in menu bar click on scheduler --> select repair full --->check the option and click ok.
now execute the IP.
If you run like this, your init which has between your PSA and ODS will no get disturb.
Regards,
Venkatesh. -
Only Delta load from R3 to MDM using MDM_CLNT_EXTR
Hi ,
I need to set up *only delta load * extraction from R3 to MDM using MDM_CLNT_EXTR. I dont want to put Intial load.
Can anyone help me in sorting out this.
BR
SyamHi Syam,
The extraction of delta data can be very well done by selecting the distribution mode as D in the transaction MDM_CLNT_EXTR.
But prior to that u need to take initial loads so as to differentiate the changes.
For more information you can refer to the below links.
https://websmp103.sap-ag.de/installmdm
Re: MDM-XI-ERP (customer master data)
https://websmp201.sap-ag.de/~sapidb/011000358700001119492007E
Hope it helps.
Thanks,
Minaz -
Unable to load the data into Cube Using DTP in the quality system
Hi,
I am unable to load the data from PSA to Cube using DTP in the quality system for the first time
I am getting the error like" Data package processing terminated" and "Source TRCS 2LIS_17_NOTIF is not allowed".
Please suggest .
Thanks,
SatyaprasadHi,
Some Infoobjects are missing while collecting the transport.
I collected those objects and transported ,now its working fine.
Many Thanks to all
Regards,
Satyaprasad -
Error while loading data from PSA to DSO
Hi,
How to identify the erroneous records in DSO?
While loading the data from PSA to DSO through Process chains we are facing the error says:
"Value '#' (hex. '0023') of characteristic 0BBP_DELREF contains invalid characters"
"Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0BBP_DELREF"
There is no error records in PSA but it seems some invalid characters exists.
Could you please help us how to find the error records in DSO and how to correct it.Hi,
These are errors BRAIN290 & RSDRO302.
The problem here most likely is that BW doesn't recognise a character you are trying to load. Generally the character is not "#",
as BW displays all symbols it does not recognise as #. You should decode from the hex string what the actual value is. Note that hex values < 20 are not allowed in BW.
Please review Note 173241 and the document mentioned within.
This shows what characters are not allowed in BW characteristic values.
You should check if the character is allowed, and then you can solve the problem in one of the following ways:
1) add this character to the "permitted character" list in RSKC as described in the note.
2) correct the value in the source system.
3) correct the value in the PSA (to do this, you will need to delete the request from the ODS object and then you can change the disallowed character via the PSA maintenance).
4) follow Note 1075403 so that the characters HEX00 to HEX1F are not checked (this affects only characteristics that do not allow "lower case").
5) if you cannot use any of the above options, then you will need to create a routine in your transfer rules for the affected infoobject, and change the value to a character which is permitted in BW.
These are the usual ways to solve this issue.
Rgds,
Colum -
Loading from PSA with different process chains at a different time
Hi,
We currently have an issue regarding loading the same data from 2 separate Process Chains from the same datasource at a different time.
Simplified what is happening :
Process Chain 1:
Step 1a = Load 2LIS_13_VDITM into ODS "A"
Step 1b = Load 0FI_GL_4 into ODS "B"
At a later time, (PC1 is ready) =>
Process Chain 2:
Step 1 = Load ODS "A" to ODS "C"
Step 2 = Load 0FI_GL_4 (from PSA) to ODS "C"
Because of dependencies, step 2 from PC2 has to be loaded AFTER Step 1 (with activation) from PC2.
We cannot change Process Chain 1.
What i want to do is load the data from 0FI_GL_4 only to PSA in Process Chain 1 and pick it up again in Process Chain 2. This functionality is available in NW2004S, but not in our version BW 3.0B.
Does anyone have an idea how to do this ?
Thanks,
PascalHi Dinesh,
Thank you for your quick answer.
The problem is i cannot change PC1, but 0FI_GL_4 is loaded with the option into PSA and then immediatly to the target. So data is available in the PSA.
When I try to load data from PSA into ODS "C" in PC2, i get an error saying that the belonging infopackage (from PC1) is not available in this PC and thus cannot be loaded from PSA.
Regards,
Pascal -
Error in delta loading from a planning cube
hi all,
I am using a delta load from one planning cube to another.When the changed records are of a magnitude of 100 then it is successful but when the records are of magnitude of 100000 then it stays yellow with no data records sent and eventually fails.the packet size is 20000.
any help is appreciated.Hello Ajay,
Have you checked that your Request is closed in the planning cube? FM RSAPO_CLOSE_TRANS_REQUEST will do it
It is a customizing issue to tell the infopackage to end "green" when it has no data.
Transaction Spro ==> SAP Netweaver ==> SAP Business Information Warehouse ==> Automated Processes ==> Monitor Settings ==> Set Traffic Light Color. There you have to set the Traffic light on green if no data is available in the system.
Hope that helps
best regards
Yannick -
Long time to load data from PSA to DSO -Sequential read RSBKDATA_V
Hi ,
It is taking long time to load data from PSA to DSO. It is doing Sequential read on RSBKDATA_V and table contents no data .
we are at - SAPKW70105. It started since yesterday . There is no changes in system parameters.
Please advice.
Thanks
NileshHi Nilesh,
I guess the following SAP Note will help you in this situation.
[1476842 - Performance: read RSBKDATA only when needed|https://websmp107.sap-ag.de/sap/support/notes/1476842]
Just note that the reference to Support Packages is wrong. It is also included in SAP_BW 701 06. -
Cannot able to load from PSA - Infocube
Hello All,
I did managed to do a full load from BW 3.5 to BI 7.0 system till PSA using infopackge selections and iam uanable to further load data to inthe infocube using DTP's from PSA...,Did anyone had a similar issue before ???
Regards
RoaKJ- No it didnt work as i did tried to load using full mode only after checking the default status .....
Some strange things are happening ....,I tried to run the Infopackage load with some selections at first and it did selected 378k records which is the correct volume ,and i tried loading using delta init in infopacakge to check if it works through that way ,but this this time its running with huge volumes with out stopping ...
P.S : Mine is a datamart loads (ODS) loading from an a system to an infocube in an another system ....I dont understand why this is behaving strangely ...
Thanks for your help anyways ..iam leaving for the day .I appreciate ur help !!
Thanks
Roa -
ERROR DURING LOADING DATA FROM PSA TO DSO IN "PRUEFMBKT"
Respected all
I am trying to load data through an r/3 field( pruefmbkt, char-40length) to infoobject. the data is coming correctly to psa but when i am loading it in to dso or infocube request is turning red giving following error message--
Value '010/12.05-112.15/hold on not operate' (hex.
'3031302F31322E30352D3131322E31352F686F6C64206F6E20') of characteristic
PRU_LSIL contains invalid characters
Message no. BRAIN060
Diagnosis
Only the following standard characters are valid in characteristic
values by default:
!"%&''()*,-./:;<=>?_0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ.+
Furthermore, characteristic values that only consist of the character #
or that begin with ! are not valid.
You are trying to load the invalid characteristic value 1. (hexidecimal
representation 3031302F31322E30352D3131322E31352F686F6C64206F6E20).
Procedure for System Administration
Try to change the invalid characters to valid characters.
If you want values that contain invalid characters to be admitted into
the system, make the appropriate setting in BW Customizing. Refer to the
documentation describing the requirements for special characters and the
possible consequences.
For more information on the problems involved with valid and invalid
characters, click here.
kindly give me the solution how to deal with this problem.
thanks
abhayHI Abhay,
please check if the infoobject corresponding to field PRU_LSIL in BW system has lower case checkbox enabled in the infoobject properties, as the value '010/12.05-112.15/hold on not operate' coming from R/3 has lower case alphabets.
Hope this helps.
Regards,
Umesh. -
Urgent : Error while loading data from PSA to DSO
Hi,
I am working on 7.0.
When i look for data into PSA then i have 1 date field which is containing data in proper date format. This date field is mapped with 0CALMONTH & 0CALYEAR for which i have written routine and directly assigned to 0DOC_DATE .
I have written a start routine to do some modifications in SOURCE_PACKAGE.
But When i am loading data from PSA to DSO its giving below error:
" Exception wrong_date ; see long text RSTRAN 303
Diagnosis
An exception wrong_date was raised while executing function module
RST_TOBJ_TO_DERIVED_TOBJ .
System Response
Processing the corresponding record has been terminated.
Procedure
To analyze the cause, set a break point in the program of the
transformation at the call point of function module
RST_TOBJ_TO_DERIVED_TOBJ . Simulate the data transfer process to
investigate the cause. "
I am not getting why this error is coming up
pls guide me !!you can map the code to DOC_DATE .
The code is used to read from any date and convert that into Fiscal year/period.
Try this code.
data: l_fiscyear type t009b-bdatj.
call function 'FISCPER_FROM_CALMONTH_CALC'
exporting
id_date = COMM_STRUCTURE-doc_date
iv_periv = 'V9'
importing
ev_fiscyear = l_fiscyear.
result value of the routine
RESULT = l_fiscyear. -
Table on delta loads from data mart
Hi,
I am loading data from two DSO's (let's call them A and B) to another DSO (B) in BI 7 with a BW3.5 delta infopackage.
Now I want to know where I can find information on the timestamp or last request from the last delta load from A and B to C.
So in fact I would like to know how the system knows which requests in A en B have not been loaded to C yet at the next delta load.
In which table can I find the information for ODS A and B that is used by the system to define what data in the change log has been loaded or not to ODS C or other targets. (In fact I should have a comparison table in BW as ROOS* in R3)
Thanks in advance!
Kind regards,
BartHi Guys,
Thanks for the answers.
I know how to check everything in the Workbench, but I want to know where the information of the delta is stored technically.
Just for the sake of completeness:
Due to some issues; several successive loads from A and B were correctly loaded into DSO C (the 'new' table), but could not be activated. It is not possible to do a repeat or anything else. I am not going into too much detail, but just take this for granted.
The only way we can 'solve' the problem is to make the system believe that the 3 last loads (activated data) in A and the two last loads in B have not been loaded to C yet. Just deleting the last delta's in C and do a new delta from A and B to C will not work.
Therefore I want to 'manipulate' the table that is being read by a delta load. If I can change the timestamp or request numbers in that table, I can make the system believe that some requests have not been loaded to C yet.
Dirty, but it should work I think. But I am still figuring out what table contains information about the datamart data source (8A and 8B) and the last delta load to the targets.
Hope this is more clear.
Thanks in advance!
Kind regards,
Bart
Maybe you are looking for
-
System error when I refresh a query/WB
Hi All, When I refresh a query/workbook getting following error message and can not proceed further.. <b>Abort System Error in program SAPLRRS2 and form INITFL_ASSIGN-01</b> We are using BW 3.5 and BEX reports. I'd appreciate if you could hel
-
Help! Received email requesting my Apple ID and Password from Apple Customer Support
I think this is an attempt to steal ID Dear client, We inform you that your Apple ID will be expired in less than 48 Hours. You must perform a verification of your informations the fastest possible, otherwise your ID will be destroyed. Just click the
-
Needs to be checked when financial year is closing
Hi, I want to know the things what to be check when the financial period 2006 is closing in SD. like number ranges,material document number range.
-
ERP 6.0 - EHP4 - SHADOW_IMPORT_INC takes long time
All, The following phase " SHADOW_IMPORT_INC " takes very long time on our system. We tested EHP4 in our test box and the same phase took only 4 Hrs now it is taking more than 8 Hrs. Log files show it is upating databases. but it is very very slow. W
-
PO message should get failed for P.grp other than AB1 and AB2
Hello SAP Gurus, I have a requirement like PO message should get failed for P.grp other than AB1 and AB2. Detail explanation: I have a P.grp AB1,AB2,AB3,AB4 etc.... The current process is once PO created and saved the message will be triggered and ID