Alternative Apple TV setup when HDTVs only HDMI port is being used?
I have an older model JVC HDTV that only has one HDMI port (being used). Is there an alternative way to connect my Apple TV Black?
Hi Rudegar,
I did some more research and I think what I am looking for is called an "HDMI Switch." Not sure exactly what it is, but it seems like its more than a traditional 'splitter.' It was recommended in other threads for older HDTVs with only one HDMI port, which gets used by the TVs receiver.
Have you heard of this?
Similar Messages
-
When plugging Apple TV into my samsung tv hdmi port nothing comes up. Actually my Sat TV plays on that same HDMI inport
Check these troubleshooting steps:
http://support.apple.com/kb/HT1551?viewlocale=en_US&locale=en_US
Specifically I wonder if the AppleTV may be trying to connect with an unsupported resolution giving a black screen. Try cycling display resolutions using these remote commands in step 6:
If your TV screen appears fuzzy or black (you see no video)
Make sure the television you are using supports the Apple TV resolution requirements. Please see the Apple TV technical specifications.
When you connect power, check to make sure the LED turns on. If the LED is not on, then verify with a known good power outlet or connect something else to the outlet you're using for Apple TV and make sure it works (such as a lamp or clock).
Make sure you're using the correct video cables and that they are connected firmly to Apple TV and to your TV.
Connect the HDMI cable directly into the Apple TV and your television, remove any third party devices or adapters.
Make sure the input setting you've selected on your TV matches the input you have your video cables connected to. See the documentation that came with your TV for more information.
Change the Apple TV resolution by pressing and holding the Menu and Up button for six seconds. The Apple TV will automatically cycle to the next resolution at approximately 20 second intervals. Pressing the Select button will immediately cycle to the next resolution.
If you are connected via HDMI, try unplugging and replugging your HDMI cable.
If HDMI isn't working on an Apple TV (1st generation), try component cables instead (and disconnect the HDMI cable temporarily). Read more about HDMI vs component video. -
Using Airport Express for External speakers and Apple TV. When I'm on MAC computer adn using internet sound from Internet does not go through external speakers. Instead it comes out of Mac computer speaker. Why?
As far as I know, the Airport Express only transmits sounds via Itunes. So every other sound (internet, but also incoming mail) will be coming out of your mac instead of your external speakers.
-
i have apple id but dont have a credit card. i used my sisters apple id. if when i have my own, can i used it in my device?
You can create an iTune and App Store account without credit card details
1. Sign out of current Apple ID if you are sign-in to one (important)
2. Go to App Store and select a free app
3. Tap INSTALL APP
4. Create New Apple ID
5. Confirm Your Country
6. Agree with Terms and Conditions
7. Fill in your Apple ID and Password (you must create a new Apple ID; don't use your old Apple ID)
8. Create and answer your secret question
9. Select NONE for Payment Method
10. Fill in Billing Address
11. Submit application for new Apple ID
12. Wait for verification email
13. When email arrive, verify your account
14. Start downloading your free apps -
I cannot get audio using this device all my HDMI ports are in use as well as my digital optical cable. Any solutions?
How exactly is the ATV connected if all HDMI ports are in use?
If connected directly to the TV, then audio is being sent to the TV speakers, not the receiver. -
i have 4 apps on my phone and 17 pics and my phone keeps saying storage is almost full.. i have a 16gb phone and it says only 12.1gb are being used, why does it keep saying my storage is full?
Can you connect to a wifi source on the device? Enable wifi in settings on the device itself. If you don't have wifi at home, there may be a local hotspot you can use for this.
The reason this happens is carriers don't want people downloading huge files that would slow their network as well as eat up your data plan. -
I have a Sony wega HDTV, and it does not have HDMI port, does anyone know if I can use Apple TV on it? If so, how is it set up?
Current AppleTVs require a TV with HDMI.
You may find some dubious adapters out there which purport to convert to other formats.
If your Tv has VGA in and an audio input you might want to look at:
http://store.apple.com/us/product/H9139VC/A/kanex-atv-pro-hdmi-to-vga-adapter-wi th-audio-support
AC -
Was just thinking a few days ago...Apple never made an ad in which all their products or at least some of their most renowned products are being used by 1 person in a day in different situations he faces...from using an iPod for jogging n then the guy just goes back home sits on his iMac then goes somewhere with his iPad then attending an important call from his iPhone n wanting to watch a movie from his Apple TV or doing something with Macbook Air or Macbook Pro....just a thought
You're only addressing other users here - you might want to try feedback:
http://www.apple.com/feedback/ -
I upgraded to a iphone 4s,when they transferred my info to my new phone itunes did not recognize my apple id because it is a old email adress that is not now being used.
IF - you changed your ID - go to Settings>Store>Apple ID - tap the ID and sign out, sign in the the correct account. Apps that you purchased with the old ID have to be updated with that ID and are always tied to that old ID.
-
[SOLVED]HDMI port not being detected
Hi everyone. Since the last update (which I did yesterday) the HDMI port on my laptop is not being detected anymore. Before everything was working as expected. The xrandr output is:
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192
LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
1366x768 60.0*+
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 disconnected (normal left inverted right x axis y axis)
The graphics card is Intel HD 4000. here's the lspci output:
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM77 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57785 Gigabit Ethernet PCIe (rev 10)
02:00.1 SD Host controller: Broadcom Corporation NetXtreme BCM57765 Memory Card Reader (rev 10)
02:00.2 System peripheral: Broadcom Corporation Device 16be (rev 10)
02:00.3 System peripheral: Broadcom Corporation Device 16bf (rev 10)
03:00.0 Network controller: Atheros Communications Inc. AR9485 Wireless Network Adapter (rev 01)
I tried downgrading mesa, mesa-libgl and intel-dri to their previous versions (9.1), but it didn't help. Is anyone else experiencing anything similar? What are your suggestions?
Thanks in advance.
Last edited by Caspian (2013-03-24 09:20:36)My X220 laptop has a DisplayPort which I plug in a DisplayPort to HDMI adapter to connect to a TV. Working fine here after I updated this morning. The X220 is Intel SandyBridge (HD3000 I believe).
$ xrandr
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 32767 x 32767
LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 277mm x 156mm
1366x768 60.0*+
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 connected (normal left inverted right x axis y axis)
1920x1080 60.0 +
1920x1080i 60.1
1280x720 60.0
1024x768 75.1 70.1 60.0
1440x480i 60.1 60.1
800x600 75.0 60.3
720x480 59.9
640x480 75.0 60.0 59.9
720x400 70.1
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
HDMI3 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
DP3 disconnected (normal left inverted right x axis y axis) -
Does Anybody have issues setting up the mail accounts in apple Mail. I am trying to set up Google mail accounts and icloud account with no luck. All recent updates is done and still it does not setup. I have re-installed the OSX and still no luck.when it does accept the passwords it does not appear in the mail application so i can still not send and receive!!!!! PLEASE any help will be appreciated.
Have you Enabled Two Step Verification Recently with Gmail?
-
Last login: Wed Sep 14 20:28:35 on console
Welcome to Darwin!
localhost:~ cat$ who
cat console Sep 14 20:28
cat ttyp1 Sep 14 20:28
localhost:~ cat$ whois
usage: whois [-aAbdgiIlmQrR6] [-c country-code | -h hostname] [-p port] name ...
localhost:~ cat$ finger
Login Name TTY Idle Login Time Office Phone
cat catherine r. *con 56 Wed 20:28
cat catherine r. p1 Wed 20:28
localhost:~ cat$ whois *con
Whois Server Version 2.0
Domain names in the .com and .net domains can now be registered
with many different competing registrars. Go to http://www.internic.net
for detailed information.
Server Name: CON.ZZBB.COM
IP Address: 203.231.42.121
Registrar: INAMES CO., LTD.
Whois Server: whois.inames.co.kr
Referral URL: http://www.inames.co.kr
Server Name: CON.VENUS.ORDERBOX-DNS.COM
IP Address: 74.54.56.236
IP Address: 74.54.56.227
IP Address: 74.54.56.231
Registrar: DIRECTI INTERNET SOLUTIONS PVT. LTD. D/B/A PUBLICDOMAINREGISTRY.COM
Whois Server: whois.PublicDomainRegistry.com
Referral URL: http://www.PublicDomainRegistry.com
Server Name: CON.TOM.RU
Registrar: REGIONAL NETWORK INFORMATION CENTER, JSC DBA RU-CENTER
Whois Server: whois.nic.ru
Referral URL: http://www.nic.ru
Server Name: CON.MERCURY.ORDERBOX-DNS.COM
IP Address: 67.15.253.251
IP Address: 67.15.47.189
IP Address: 67.15.253.220
Registrar: DIRECTI INTERNET SOLUTIONS PVT. LTD. D/B/A PUBLICDOMAINREGISTRY.COM
Whois Server: whois.PublicDomainRegistry.com
Referral URL: http://www.PublicDomainRegistry.com
Server Name: CON.MARS.ORDERBOX-DNS.COM
IP Address: 74.52.140.84
IP Address: 74.52.140.82
IP Address: 74.52.140.83
Registrar: DIRECTI INTERNET SOLUTIONS PVT. LTD. D/B/A PUBLICDOMAINREGISTRY.COM
Whois Server: whois.PublicDomainRegistry.com
Referral URL: http://www.PublicDomainRegistry.com
Server Name: CON.MAIYEUBE.NET
IP Address: 207.218.250.214
Registrar: MELBOURNE IT, LTD. D/B/A INTERNET NAMES WORLDWIDE
Whois Server: whois.melbourneit.com
Referral URL: http://www.melbourneit.com
Server Name: CON.MAFIAWORLDCONFLICT.COM
IP Address: 96.125.168.211
Registrar: DOMAIN.COM, LLC
Whois Server: whois.domain.com
Referral URL: http://www.domain.com
Server Name: CON.KONKAK.COM
IP Address: 67.214.175.71
Registrar: TUCOWS.COM CO.
Whois Server: whois.tucows.com
Referral URL: http://domainhelp.opensrs.net
Server Name: CON.KANGX.COM
IP Address: 210.118.234.6
Registrar: YESNIC CO. LTD.
Whois Server: whois.yesnic.com
Referral URL: http://www.yesnic.com
Server Name: CON.JCSMEDIA.COM
IP Address: 216.199.69.35
Registrar: WILD WEST DOMAINS, INC.
Whois Server: whois.wildwestdomains.com
Referral URL: http://www.wildwestdomains.com
Server Name: CON.HNIP.CO.KR
Registrar: INAMES CO., LTD.
Whois Server: whois.inames.co.kr
Referral URL: http://www.inames.co.kr
Server Name: CON.ETVILLE.COM
IP Address: 112.220.108.114
Registrar: ASADAL, INC.
Whois Server: whois.asadal.com
Referral URL: http://www.asadal.com
Server Name: CON.EARTH.ORDERBOX-DNS.COM
IP Address: 67.15.253.252
IP Address: 67.15.47.188
IP Address: 67.15.253.219
Registrar: DIRECTI INTERNET SOLUTIONS PVT. LTD. D/B/A PUBLICDOMAINREGISTRY.COM
Whois Server: whois.PublicDomainRegistry.com
Referral URL: http://www.PublicDomainRegistry.com
Server Name: CON.DIABLOIII.PRO
Registrar: OVH
Whois Server: whois.ovh.com
Referral URL: http://www.ovh.com
Server Name: CON.DELDC.COM
IP Address: 210.91.181.71
Registrar: YESNIC CO. LTD.
Whois Server: whois.yesnic.com
Referral URL: http://www.yesnic.com
Server Name: CON.CONFESIONESDESOFIA.COM
IP Address: 174.121.246.152
Registrar: MYDOMAIN, INC.
Whois Server: whois.namesdirect.com
Referral URL: http://www.namesdirect.com
Server Name: CON.CAUTO.COM
IP Address: 12.31.226.135
Registrar: NETWORK SOLUTIONS, LLC.
Whois Server: whois.networksolutions.com
Referral URL: http://www.networksolutions.com
Server Name: CON.BLAZINGREALMS.COM
IP Address: 68.67.78.230
Registrar: OVH
Whois Server: whois.ovh.com
Referral URL: http://www.ovh.com
Server Name: CON.BELLSFERRY.COM
IP Address: 216.199.69.35
Registrar: WILD WEST DOMAINS, INC.
Whois Server: whois.wildwestdomains.com
Referral URL: http://www.wildwestdomains.com
Domain Name: CON.NET
Registrar: UNIVERSAL REGISTRATION SERVICES INC. DBA NEWDENTITY.COM
Whois Server: whois.newdentity.com
Referral URL: http://www.newdentity.com
Name Server: NS1.SEDOPARKING.COM
Name Server: NS2.SEDOPARKING.COM
Status: clientDeleteProhibited
Status: clientTransferProhibited
Status: clientUpdateProhibited
Updated Date: 04-may-2011
Creation Date: 03-may-2003
Expiration Date: 03-may-2012
Domain Name: CON.COM
Registrar: TUCOWS.COM CO.
Whois Server: whois.tucows.com
Referral URL: http://domainhelp.opensrs.net
Name Server: NS1.CON.COM
Name Server: NS2.CON.COM
Status: clientTransferProhibited
Status: clientUpdateProhibited
Updated Date: 05-nov-2010
Creation Date: 05-dec-1993
Expiration Date: 04-dec-2011
>>> Last update of whois database: Thu, 15 Sep 2011 04:25:10 UTC <<<
NOTICE: The expiration date displayed in this record is the date the
registrar's sponsorship of the domain name registration in the registry is
currently set to expire. This date does not necessarily reflect the expiration
date of the domain name registrant's agreement with the sponsoring
registrar. Users may consult the sponsoring registrar's Whois database to
view the registrar's reported date of expiration for this registration.
TERMS OF USE: You are not authorized to access or query our Whois
database through the use of electronic processes that are high-volume and
automated except as reasonably necessary to register domain names or
modify existing registrations; the Data in VeriSign Global Registry
Services' ("VeriSign") Whois database is provided by VeriSign for
information purposes only, and to assist persons in obtaining information
about or related to a domain name registration record. VeriSign does not
guarantee its accuracy. By submitting a Whois query, you agree to abide
by the following terms of use: You agree that you may use this Data only
for lawful purposes and that under no circumstances will you use this Data
to: (1) allow, enable, or otherwise support the transmission of mass
unsolicited, commercial advertising or solicitations via e-mail, telephone,
or facsimile; or (2) enable high volume, automated, electronic processes
that apply to VeriSign (or its computer systems). The compilation,
repackaging, dissemination or other use of this Data is expressly
prohibited without the prior written consent of VeriSign. You agree not to
use electronic processes that are automated and high-volume to access or
query the Whois database except as reasonably necessary to register
domain names or modify existing registrations. VeriSign reserves the right
to restrict your access to the Whois database in its sole discretion to ensure
operational stability. VeriSign may restrict or terminate your access to the
Whois database for failure to abide by these terms of use. VeriSign
reserves the right to modify these terms at any time.
The Registry database contains ONLY .COM, .NET, .EDU domains and
Registrars.
No match "*con."
localhost:~ cat$
< Edited By Host >localhost:~ cat$ who
cat console Sep 14 20:28
cat ttyp1 Sep 14 20:28
so your logged in a user 'cat,' witch is why you have 'cat console'. You have the terminal open, witch is why you see 'cat ttyp1'.
localhost:~ cat$ finger
Login Name TTY Idle Login Time Office Phone
cat catherine ronalds *con 56 Wed 20:28
cat catherine ronalds p1 Wed 20:28
Same thing here.
your logged into user 'cat' with the long name of 'C******** r*****' "*con" is again the console. And Again you have the terminal open, witch is why you see p1.
When you log into the computer, the console activate the Finder, Dock, extra. -
Multiple TC-2095s, but only 1 Reference junction being used
In my LabVIEW program, I create the DAQmx task programaticly just before starting data acquisition. I use SCXI 1102s with TC-2095s, with multiple sets in a given test stand. I add each used channel to the DAQmx task individually using the DAQmx Create Virtual Channel vi. I added a new 1102 to one of my systems, but a TC-2095 was not handy. I added the new channels to the scan list. When I ran the system, all channels, those in the old module/interface set as well as the new incomplete set, showed temperatures too high by an amount that would be expected by an open reference junction channel. When a TC-2095 was connected, the values changed to normal.
This seems to indicate that the system is using only the last junction reference for sensing the junction temperature. This is not optimal. While the TC-2095s are stacked in the rack, and should be close in temperature, there could be several degrees error due to temperature differentials between the boxes.
Is this due to the way I create the task? Is there a way around it.Hi David,
There a couple of things that are happening here that could cause the unexpected result. If you're new channels in the 1102 are added to the scan list, but are not actually connected (they are floating), you can expect to see incorrect voltages. Also, since you noticed a change back to an expected value when you added the 2095, there could have been an impedence matching problem.
Try removing the new channels from your scan list and adding the 1102 without the 2095 again to see if the voltages are correct. Please post back if you have any questions. Have a great day!
Ryan D.
District Sales Manager for Boston & Northern New England
National Instruments -
My application involves operating a pH meter via RS-232 protocol. Other hardware are operated using an E-series DAQ board whereby waveforms are software-generated and sent to the relevant hardware using an Analog Output channel. Data acquisition is performed utilising Analog Input channels of the DAQ card that have been configured in a Referenced Single-Ended mode. When the Analog I/O channels are active erroneous readings are observed on the pH meter if the RS-232 cable is connected between the pH meter and the control PC. No problem is observed if the RS-232 cable is disconnected. What could be the problem and any suggestions on how to solve this.
Comments to your questions:
Built-in = Originally supplied on the PC's motherboard
1)I use built-in RS-232 interface
2)I use built-in Bus type
3)The RS-232 cable is shield connected
4) I'm not sure on how to check if the RS-232's digital ground signal is connected. I simply connected the RS-232 cable from the pH meter to the serial port. The serial communication works fine, with no disturbance to the pH meter if i don't initiate data acquisition. -
I am playing TV show from itunes library via Apple TV on my HDTV. However, It is trasnmitting only video signal & no Audio. I have checked in my itunes, & have ensured "Apple TV" has been choosen in the bottom for streaming.
I have connected APPLE TV to my HDTV via HDMI cable.
Itunes is installed in my laptop.
I access itunes library on APPLE TV Menu & Try to watch the TV show that is downloaded.
But it is only streaming Video & no Audio in that.
Can any one help me here.!!!3G is too slow. wifi is faster.
Or am I just being too impatient and eager to watch my show?
This is how I do it.
http://www3.tivo.com/products/source/satellite/tivo-directv/index.html
Maybe you are looking for
-
Changing Buttons in Gallery Folder not Showing Up in Properties Window
If you change the button size of custom buttons with Photoshop and replace the files in your Gallery folder, how to you get rid of the old buttons in Captivate's properties window?
-
Controlling Layers and Acrobat X Pro
We are in the process of transitioning from Acrobat 9 Pro Extended to Acrobat X Pro. My current version of Acrobat 9 has a Right Hemisphere plugin that provides some useful templating features including nice buttons and text fields. The feature tha
-
Problem while saving an object under a dev class
hi all, Here is a problem while saving an object under a development class.... I created a Z program (ZSORDER) through SE38 and while i was saving that Z program under a development class called SALES it shows an error message like <b>" cus
-
Lenovo S650 - default (factory) desktop view
Hello everybody. Happy New Year! My calendar and power panels disappeared today. It still works fine. I tried to return default view of "calendar+power panels on 1 desktop" but can put only one of it, smartphone reports that row is full. So, do you h
-
Change partition type and 2 billion rows limit.
Hello experts , My DB's 1 table has 4 billion records , so I'm using range partition for this , I devided 10 partitions. I want to change this range partition to hash partition. In this time , I think I should do following . 1. execute "alter table b