ALV calculating totals

Hello Fellow ABAPers,
I have created a ALV grid report and by trapping the EVENT after_refresh and using method get_subtotals I have read the total lines, recalculated a couple colums based on the totals and using method refresh_table_display EXPORTING i_soft_refresh = 'X' display the grid with the recalculated totals. Everything looks fine online but when I print it out the recalculated total columns are blank, when the print is generated SAP's process is re-calculating the total lines, Is there a way to stop this? or How can I get these calculated columns on the total lines to print?
Thanks for your help,
Phil

Naimesh,
Just wanted to say thnaks for your quick reply, was able to apply your example code and get it to work, all though it didn't work when run in background I was able to figure out why and using an FM was able to get the re-calculated sub-totals and totals to show up.
Thanks again,
Phil

Similar Messages

Calculating Totals for a column in ALV Grid Display

Hi All,
I frustrated with the problem of simple calculating total for a column. I wrote the following code:
LW_CATALOG-TABNAME   = P_GV_STRUCT.
LW_CATALOG-FIELDNAME = 'ZSUMMS'.
LW_CATALOG-DO_SUM    = GC_X.
APPEND LW_CATALOG TO G_FIELDCAT_TAB.
CLEAR LW_CATALOG.
It is not working. Could you please suggest the solution?
It would be great help to me.
Advanced Thanks,
Phani Kumar

Phani,
Did u try playing around with any of these layout fields ?
no_sumchoice(1),       " no choice for summing up
no_totalline(1),       " no total line
no_subchoice(1),       " no choice for subtotals
no_subtotals(1),       " no subtotals possible
no_unit_splitting " no sep. tot.lines by inh.units
totals_before_items,   " diplay totals before the items
totals_only(1),        " show only totals
totals_text(60) ,      " text for 1st col. in total line
subtotals_text(60) ,    " text for 1st col. in subtotals
b. Addtionally... not a solution.. but u know...
just try the same code iwth reuse_alv_list_display and see if the total gets displayed properly ?

I am using a PC with window 7 and adobe photoshop 12. I have followed Photoshop Elements Help and I still have the same problem. When I try to backup Photoshop 12 it has stop on7% when calculating Total Media size. What can I do?

I am using a PC with window 7 and adobe photoshop 12. I have followed Photoshop Elements Help and I still have the same problem. When I try to backup Photoshop 12 it has stop on7% when calculating Total Media size. What can I do?

Hi Prabhuram and falez,
This issue appears where there are any inconsistencies in your catalog (generally for video files). This issue may be due to offline files, missing files, video scenes. The recommendation here would be to fix these inconsistencies and try again. If that doesn't solve the issue, please follow steps mentioned in email by me.
~Surendra

Alv grid total overflow

hi all,
I have an overflow error in alv total field.
first i filled alv grid using et_table_for_first_display, again i changed itab data
and use refresh_table_display to refresh data.
the alv contains total fields in field catalog.... when i try to 'refresh_table_display '
it comes an over flow error is coming and it comes every sort of records.. how can i trap this error ..??
thanks and regards
Jose

Hi Anup,
While using ALV with OOP methodology, you can create an extra row for giving the sum of any field.
In the field catalog, there is a component named 'DO_SUM', if set, will give the total value for the field.
In the method where you fill the field catalog , just add this component.
eg:
form catalog_fill changing p_field_catalog.
data ls_fcat type lvc_s_fcat .
ls_fcat-fieldname = 'CARRID' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'Carrier ID' .
ls_fcat-web_field = 'carrid_handle'.
ls_fcat-edit = 'X'.
*ls_fcat-emphasize = 'C310'. "needed for column coloring
append ls_fcat to field_catalog .
clear ls_fcat .
ls_fcat-fieldname = 'FLDATE' .
ls_fcat-ref_table = 'SFLIGHT' .
ls_fcat-ref_table = 'FLDATE' .
ls_fcat-outputlen = '20' .
<b>ls_fcat-do_sum = 'X'.</b>
ls_fcat-coltext = 'Flight Date' .
ls_fcat-web_field = 'fldate_handle'.
append ls_fcat to field_catalog .
clear ls_fcat .
ls_fcat-fieldname = 'PRICE' .
ls_fcat-ref_table = 'SFLIGHT' .
ls_fcat-ref_table = 'PRICE' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'Airfare' .
append ls_fcat to field_catalog .
endform.
In this way, you can get the total of any field in ALV.
Regards,
SP.

Calculating total memory in oracle RAC environment

I have to calculate total memry in RAC environment.
For shared and buffer pool I execute show sga.
For UGA and PGA I execute statement that have two different values.
This is my two different methot for calculating total memory in oracle RAC environment.
Why I have very different value in this 2 statements on pga values?
first stat
with vs as
select 'PGA: ' pid
,iid
,session_pga_memory + session_uga_memory bytes
from (select inst_id iid
,(select ss.value
from gv$sesstat ss
where ss.sid = s.sid
and ss.inst_id = s.inst_id
and ss.statistic# = 20) session_pga_memory
,(select ss.value
from gv$sesstat ss
where ss.sid = s.sid
and ss.inst_id = s.inst_id
and ss.statistic# = 15) session_uga_memory
from gv$session s)
union all
select 'SGA: ' || name pid
,s.inst_id iid
,value bytes
from gv$sga s
select distinct iid, pid, sum(bytes) over (partition by iid, pid) bytes from vs
IID PID BYTES
1 PGA: 196764792 <=====
1 SGA: Database Buffers 318767104
1 SGA: Fixed Size 733688
1 SGA: Redo Buffers 811008
1 SGA: Variable Size 335544320
2 PGA: 77159560 <=====
2 SGA: Database Buffers 318767104
2 SGA: Fixed Size 733688
2 SGA: Redo Buffers 811008
2 SGA: Variable Size 335544320
second stat
with vs as
select 'PGA: ' pid
,p.inst_id iid
,p.pga_alloc_mem bytes
from gv$session s
,gv$sesstat pcur
,gv$process p
where pcur.statistic# in ( 20 -- = session pga memory
,15 -- = session uga memory
and s.paddr = p.addr
and pcur.sid = s.sid
and pcur.INST_ID = s.INST_ID
and pcur.INST_ID = p.INST_ID
union all
select 'SGA: ' || name pid
,s.inst_id iid
,value bytes
from gv$sga s
select distinct iid, pid, sum(bytes) over (partition by iid, pid) bytes from vs
IID PID BYTES
1 PGA: 342558636 <=====
1 SGA: Database Buffers 318767104
1 SGA: Fixed Size 733688
1 SGA: Redo Buffers 811008
1 SGA: Variable Size 335544320
2 PGA: 186091416 <=====
2 SGA: Database Buffers 318767104
2 SGA: Fixed Size 733688
2 SGA: Redo Buffers 811008
2 SGA: Variable Size 335544320

I'm sorry but it is not clear to me.
- From v$session (1th stmt) I have
nearly 196MB of PGA mem on instance 1
and
nearly 77MB of PGA mem on instance 2
- From v$process (2th stmt) I have
nearly 342MB of PGA mem on instance 1
and
nearly 186MB of PGA mem on instance 2
then...
342+186 - 196+77 = nearly 255MB of memory allocated by oracle processes but free?
if I want calculate the total thing of the amount of the allocated memory from Oracle...It is more correct 2th statement that query v$process...it is true?

Calculating Total Ending Inventory

Hello BW Gurus,
I have a reporting question for you. Please reply back as soon as possible as I am nearing the deadline.
The scenario is as below:
I need to calculate the Total Ending Inventory and the formula is as below:
Total Ending Inventory = A B C + D + Last Period Total Ending Inventory
How would I calculate the Last Period Total Ending Inventory? Total Ending Inventory is just a Calculation and is stored no where in BW. Since I am running the report for the first time this month, Last period 'Total Ending Inventory' would be Zero for the current month. But current month's Total Ending Inventory would become next month's Last Period Total Ending Inventory. To acheive this, I need to store the Calculated Total Ending Inventory somewhere in BW so that I can pull this information when I am calculating next month's Total Ending Inventory.
Please let me know the solution and the steps involved as soon as possible.
Thank you very much in advance.
Best Regards,
Rajiv.

Hi Anil,
Thanks for your reply. The problem here is Total Ending Inventory is not a KF that is stored in a Cube. It is a calculated Key Figure. When I am calculating Total Ending Inventory I need to add last period's Total Ending Inventory to the calculation. Any idea on how to achieve this?
Thanks in advance.
Best REgards,
Rajiv.

Organizer 12 backup stops while calculating Total Media Size

I have not successfully completed a backup with PS Organizer 12. It stalls at 16 or 17 % calculating Total Media Size. My Photo folders are about 180 GB. I have 287GB free on my data drive. My Apps drive is a 100GB SSD with 36GB free. When Backing up I am given the choice for full backup of the partial. I chose full. It does not ask for a folder. Do not know why. I transferred my photo folders from my previous PC, then transferred my USER PSE files and all worked fine, all attributes were transferred. In addition I have optimized my catalog; cleaned the thumbnail CACHE by changing the .dat files to .old and restarting; set my Registry for maximum file size in Organizer to 1.5GB, my largest file size is 1.2GB;
deleted files from the Catalog larger than 50MB and all files and imported them back in. The Adobe help has help topics of either Back up your catalog to an external hard drive or Back up your catalog to a CD or DVD (Windows Only). They do not mention a thing about backing up onto your PC, they do not say you cannot. Well, oh, I have 8GB RAM and an Intel Core i7. Suggestions appreciated.

I identified the problem as to why PSE 12 Organizer was freezing during backup procedures. The problem of freezing during backup calculation of the file size is caused by the existence of *.MOV file types. Both my Nikon camera and my Kodak digital cameras save video recordings in *.MOV file formats. This is likely a rare case, as only users who have Kodak or Nikon Cameras would be affected.
I had to select, filter, all files with *.MOV formats and delete them from my catalog. After the catalog was backed up successfully on my hard drive, same drive, different folder, I had to drag and drop the videos to get them back into the catalog. All tags and locations and people were lost. I could not search them and import from folder. So the catalog is backed up successfully. This is likely a rare case, as only users who have Kodak or Nikon Cameras would be affected.
Case Solved.
Elements 12 backup failPhotoshop ElementsProblem with backing up catalog in Elements Organizer 12 - help please@

Abap-alv grand totals

hi friends,
how to find alv grand totals with out subtotals.
for ex for subtotals we use do_sum,
like that what we use for grand totals with out subtotals.

Hi,
Do not pass the Sort table to ALV...pass X for the DO_SUM in the fieldcatalog for the field you want to have total.
g_fieldcat-tabname   = 'I_INA2011'.
g_fieldcat-fieldname = 'HRTOT'.
g_fieldcat-coltext   = 'Total Hours Work'(006).
g_fieldcat-do_sum    = 'X'.          " Pass this
APPEND g_fieldcat TO i_fieldcat.
CLEAR g_fieldcat.
* Calling method to display data.
    CALL METHOD g_alv_grid->set_table_for_first_display
      EXPORTING
        is_layout       = g_layout
        i_save          = 'A'
      CHANGING
        it_fieldcatalog = i_fieldcat
        it_outtab       = i_ina2011.

When I try to backup my catlaog the program locks up at "Calculating Total Media Size" 33%?

When I try to backup my catlaog the program locks up during the "Calculating Total Media Size" process at 33%?

I have seen this before and it is probably a bad video. There is no great solution. To determine if this is the cause I would remove all your videos from PSE and try to do a backup, if the backup works, one of the videos is bad. It is trial and error to determine which video. When you remove your videos from PSE make a note as to where you have put them so you can reload them..

When I try to backup my files from photoshop elements 12 the "calculating total media size" box will only get as far as 46% and then freeze, how can I make it go to 100%

When I try to backup my files from photoshop elements 12 the "calculating total media size" box will only get as far as 46% and then freeze, how can I make it go to 100%

hi barbara
thank you for your response, i appreciate it. there's definitely nothing wrong with the mouse or trackpad, both work fine in every other application....i can also easily change size dimensions in other programs on my computer so it doesn't seem to be that either. it seems like there is something weird going on in the way that pse and my mac are interacting with each other, just wish i knew what it was. thank you again, wish me luck!

Redisplay calculated total

Hi,
I need some help.
I have a simple 'query/single selection result' page. You select a row and go to a 2nd page where you can make changes to the details.
One of the changes you can make is a quantity attribute which is part of an EO/VO. If quantity changes, the total amount is re-calculated and updated on a different VO. Total amount is a transient field of a VO without EO.
The problem is I can't seem to redisplay this new calculated total when the 'apply' button is pressed even though I've updated the VO with the new value. It still shows the old value and I have to go back to the query page and redisplay to see the new value.
I've tried the following but nothing is working:
pageContext.setForwardURLToCurrentPage (playing with retain AM)
ClearCache
pageContext.putParameter(totalAmount)
Any help or ideas is greatly appreciated.

pageContext.putParameter(name,value) worked. I just had the wrong name.
Thanks for your time.

ALV: conditional total / subtotal calculation

Dear colleagues,
I am using the REUSE_ALV_GRID_DISPLAY_LVC function. My ALV has character columns only. There are 5 key columns and up to 120 day columns (one per day). The day columns containing "real character" values or blank. Does anybody know if it is possible to implement the following requirement? And if yes, how?
The toolbar should contain the total and subtotal button. When (i.e.) the subtotal button is pressed, for every day column the number of cells containing "real characters" (not blank only) should be displayed grouped by the marked key col. ?
Thank you for your help,
Peter

Hi,
You need to have an field which is an integer type i.e. type i in the structure and make the subtotal as 'X' in the Field layout.
Thanks & Regards
Sarves Sombhatla

Alv - sub totals and avg

Hi gurus,
I have a problem, please help me out.
Iam doing an report program with alv display. In that iam calculating the AVG for the workcenter wise for the field TAT.
please observe my below o/p in general ALv format.
work center-- TAT- Tat(Yes/no)
qm0010------ 1 -- yes
qm0010-------2 -- yes
qm0010------ 4 -- yes
qm0010------ 7 -- No (because >5)
Subtotal(qm0010)--3 (avg caluculated)
qm0020-- 4 --- yes
qm0020-7-- No (because >5)
qm0020--10 - No (because >5)
qm002010- No (because >5)
Subtotal(qm0020)-- 7 (avg caluculated).
this is the rough o/p iam getting . this is acheived by programming the Field catalog for TAT field i.e... do_sum = 'C'.
then giving the sort table to REUSE_ALV_GRID_DISPLAY.
Now my problem is:
I want the avg to be calcuted by the business formula which is:
avg = sum of(TAT within 5 days) / total no of the entries .
Ex:
work center-- TAT- Tat(Yes/no)
qm0010------ 1 -- yes
qm0010-------2 -- yes
qm0010------ 4 -- yes
qm0010------ 7 -- No (because >5)
Subtotal(qm0010)---*7/4=2 (avg caluculated for tat<5)*
qm0020-- 4 --- yes
qm0020-7-- No (because >5)
qm0020--10 - No (because >5)
qm002010- No (because >5)
Subtotal(qm0020)--4/4=1 (avg caluculated for tat<5).
How can i acheive the above, since in field catalog and alv, i think we cannot pass any conditions(like for TAT which is less than 5). So is there any other way to acheive the above.
Please understand the problem and give me(please directly dont suggest any programs , since iam not a expert to understand)..
Please explain me in detail. Points will be duly rewarded.
Thanks in advance........Chaitu
Edited by: chaitanya on May 30, 2008 12:33 PM
Edited by: chaitanya on May 30, 2008 12:38 PM
Edited by: chaitanya on May 30, 2008 12:39 PM

Hi Chaitanya,
You can display in your report with totals and sub-totals using alv, but not average. That functionality has not provided by sap. Do one thing add one more extra column Average in your output, do the calculation for average and pass the value in the coding itself. Then last display your report with Average field.
Rgds,
Bujji

Alv grand total

hi gurus pls help me on this issue....... i want grand total on each column of this report.
for example field 'metric-safety'. if possbile try to edit this and send me.
TYPE-POOLS : slis.
Tables : Marc, " Plant Data for Material
Mbew, " Material Valuation
Ekpo, " Purchasing Document Item
Eord, " Purchasing Source List
Zpmt. " Purchasing Metric Table
Internal Tables Declaration----
Data : Begin of metric occurs 0,
matnr like marc-matnr, " Material number
werks like marc-werks, " Plant
minbe like marc-minbe, " Recoder Point
eisbe like marc-eisbe, " Safety Stock
stprs like mbew-stprs, " Standard Price
lifnr like eord-lifnr, " Vendor
menge like ekpo-menge, " PO Quantity
scalc type p decimals 2,
safety(20) type c,
tcalc type p decimals 2,
Target(20) type c,
acalc type p decimals 2,
actual(20) type c,
ecalc type p decimals 2,
excess(20) type c,
ucalc type p decimals 2,
usafety(20) type c,
*******Custom table
inscr like zpmt-inscr, " Inventory Score
stkot like zpmt-stkot, " Stock Out
impct like zpmt-impct, " Impact
nafta like zpmt-nafta, " %nafta
stscr like zpmt-stscr, " Stock Out Score
end of metric.
Data : final like metric occurs 0 with header line.
DATA: fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
**Data : Begin of output occurs 0,
lifnr like eord-lifnr, " Vendor
eisbe like marc-eisbe, " Safety Stock
minbe like marc-minbe, " Re-order Point
stprs like mbew-stprs, " Standard Price
sstock(13) type c, " Value of Safety Stock
Actual(13) type c, " Actual
Excess(13) type c, " Excess Inv
underSs(13) type c, " Under Safety Stock
end of output.
Data type Declaration----
Data : a type c value '$'.
Data : safety(20) type c,
target(20) type c,
actual(20) type c,
excess(20) type c,
usafety(20) type c,
repid like sy-repid.
data : i_pos type i.
Selection Screen----
selection-screen : begin of block b1 with frame Title tname.
Select-options: Mat for marc-matnr, " Material Number Selection
Plt for marc-werks, " Plant Selection
Vdr for eord-lifnr. " Vendor Selection
selection-screen : end of block b1.
Initialization----
initialization.
tname = 'Purchasing Metric Report'.
At Selection-Screen----
At selection-screen.
IF mat = ' ' and Plt = ' ' and Vdr = ' '.
message e000.
*elseif mat metric-matnr.
*message e001.
*elseif plt metric-werks.
*message e002.
*elseif vdr metric-lifnr.
*message e003.
endif.
Start-of-Selection----
Start-of-selection.
*******For Data Retrival
Perform Data_retrival.
*******For Calculation
Perform Calculation.
*******For Building Fieldcatalog
Perform Build_fieldcatalog.
*******Alv Display
Perform Alv_display.
*& Form Get_Data
text
FORM Data_retrival .
SELECT a~matnr
a~werks
a~eisbe
a~minbe
b~matnr
b~stprs
c~matnr
c~lifnr
d~matnr
d~menge
into corresponding fields of table metric from
( ( ( marc as a inner join mbew as b on bmatnr = amatnr )
inner join eord as c on cmatnr = amatnr )
inner join ekpo as d on dmatnr = amatnr )
where amatnr in mat and awerks in plt and c~lifnr in vdr.
if sy-subrc = 0.
sort metric by matnr.
endif.
ENDFORM. " Get_Data
*& Form Calculation
text
FORM Calculation .
loop at metric.
******calculation for safety stock ( safety stock * standard price )
metric-scalc = metric-eisbe * metric-stprs.
move metric-scalc to safety.
condense safety.
concatenate a safety into metric-safety.
******calculation for target ( safety stock + standard price )
metric-tcalc = ( metric-eisbe * metric-stprs ) + metric-stprs.
move metric-tcalc to target.
condense target.
concatenate a target into metric-target.
******calculation for Actual ( Po quantity * standard price )
metric-acalc = metric-menge * metric-stprs.
move metric-acalc to actual.
condense actual.
concatenate a actual into metric-actual.
******calculation for Excess Inv ( Actual - Target )
metric-ecalc = ( metric-menge * metric-stprs ) - ( ( metric-eisbe * metric-stprs ) + metric-stprs ).
move metric-ecalc to excess.
condense excess.
concatenate a excess into metric-excess.
******calculation for Under Safety Stock ( actual < safety stock. then actual + safety stock (Else) zero )
if actual < safety.
metric-menge * metric-stprs < metric-eisbe * metric-stprs.
metric-ucalc = ( metric-menge * metric-stprs ) + ( metric-eisbe * metric-stprs ).
else.
metric-ucalc = 0.
endif.
move metric-ucalc to usafety.
condense usafety.
concatenate a usafety into metric-usafety.
collect metric into final.
endloop.
ENDFORM. " Calculation
*--End-for-Selection--
*end-of-selection.
*loop at final.
*write : / final-lifnr, final-safety, final-target, final-actual, final-excess, final-usafety.
*endloop.
*& Form Build_fieldcatalog
text
--> p1 text
<-- p2 text
FORM Build_fieldcatalog .
fcat-fieldname = 'LIFNR'.
fcat-seltext_m = 'Vendor'.
fcat-col_pos = i_pos.
fcat-outputlen = 10.
fcat-emphasize = 'X'.
fcat-key = 'X'.
fcat-do_sum = 'X'.
fcat-edit = 'X'.
append fcat to fcat.
clear fcat.
i_pos = i_pos + 1.
fcat-fieldname = 'SAFETY'.
fcat-seltext_m = 'Safety Stock'.
fcat-col_pos = 2.
fcat-outputlen = 10.
fcat-emphasize = 'X'.
fcat-do_sum = 'X'.
fieldcatalog-key = 'X'.
append fcat to fcat.
clear fcat.
fcat-fieldname = 'ACTUAL'.
fcat-seltext_m = 'Actual'.
fcat-col_pos = 3.
fcat-outputlen = 10.
fcat-emphasize = 'X'.
fcat-do_sum = 'X'.
fieldcatalog-key = 'X'.
append fcat to fcat.
clear fcat.
fcat-fieldname = 'TARGET'.
fcat-seltext_m = 'Target'.
fcat-col_pos = 4.
fcat-outputlen = 10.
fcat-emphasize = 'X'.
fieldcatalog-key = 'X'.
append fcat to fcat.
clear fcat.
fcat-fieldname = 'EXCESS'.
fcat-seltext_m = 'Excess Inv'.
fcat-col_pos = 5.
fcat-outputlen = 10.
fcat-emphasize = 'X'.
fieldcatalog-key = 'X'.
append fcat to fcat.
clear fcat.
fcat-fieldname = 'USAFETY'.
fcat-seltext_m = 'Under Safety Stock'.
fcat-col_pos = 6.
fcat-outputlen = 20.
fcat-emphasize = 'X'.
fieldcatalog-key = 'X'.
append fcat to fcat.
clear fcat.
fcat-fieldname = 'INSCR'.
fcat-seltext_m = 'Iventory Score'.
fcat-col_pos = 7.
fcat-outputlen = 20.
fcat-emphasize = 'X'.
fieldcatalog-key = 'X'.
append fcat to fcat.
clear fcat.
fcat-fieldname = 'STKOT'.
fcat-seltext_m = 'Stock Out'.
fcat-col_pos = 6.
fcat-outputlen = 20.
fcat-emphasize = 'X'.
fieldcatalog-key = 'X'.
append fcat to fcat.
clear fcat.
fcat-fieldname = 'IMPCT'.
fcat-seltext_m = 'Impact'.
fcat-col_pos = 6.
fcat-outputlen = 20.
fcat-emphasize = 'X'.
fieldcatalog-key = 'X'.
append fcat to fcat.
clear fcat.
fcat-fieldname = 'NAFTA'.
fcat-seltext_m = '%Nafta'.
fcat-col_pos = 6.
fcat-outputlen = 20.
fcat-emphasize = 'X'.
fieldcatalog-key = 'X'.
append fcat to fcat.
clear fcat.
fcat-fieldname = 'STSCR'.
fcat-seltext_m = 'Safety Out Score'.
fcat-col_pos = 6.
fcat-outputlen = 20.
fcat-emphasize = 'X'.
fieldcatalog-key = 'X'.
append fcat to fcat.
clear fcat.
ENDFORM. " Build_fieldcatalog
*& Form Alv_display
text
--> p1 text
<-- p2 text
FORM Alv_display .
repid = sy-repid.
*CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_STRUCTURE_NAME =
IS_LAYOUT =
IT_FIELDCAT = fcat[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = final
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
*IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = repid
i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
i_callback_user_command = 'USER_COMMAND'
i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fcat[]
it_special_groups = gd_tabgroup
it_events = gt_events
is_print = gd_prntparams
i_save = 'X'
is_variant = z_template
tables
t_outtab = final
exceptions
program_error = 1
others = 2.
if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
thx in advance

hi,
for subtotal and grand total do the same thing like following,
DATA: GS_SORT TYPE SLIS_SORTINFO_ALV.
CLEAR GS_SORT.
GS_SORT-FIELDNAME = 'FIELD1'.
GS_SORT-SPOS      = 1.
GS_SORT-UP        = 'X'.
GS_SORT-SUBTOT    = 'X'.
APPEND GS_SORT TO GT_SORT.
CLEAR GS_SORT.
GS_SORT-FIELDNAME = 'FIELD2'.
GS_SORT-SPOS      = 2.
GS_SORT-UP        = 'X'.
*GS_SORT-SUBTOT    = 'X'.
APPEND GS_SORT TO GT_SORT.
if uesful rewars points

How to combined 2 ALV grand total

Hi All,
We are using list display I have two ALV lists with same fields I want to combined the grand total of ALV lists and do some calculations and display in ALV_END_OF_LIST.Is it possible?
Thanks in Advance
Regards
Deepak

HI,
Declare a Varialbe, and Move the First ALV total to thsi field, and while doing the Second ALV, add the total to that new field and print that field in the ALV_END_OF_LIST.
Regards
Sudheer

ALV calculating totals

Similar Messages

Maybe you are looking for