ALV FORMATTING AS PER PAGE SIZE

Hi Gurus,
1.) Currently my selection screen is not optimized as much as the webpage size.. i want it to fit exactly in the page..
The default size of the webdynpro page is as much of the image..
I want some spacing between the elements in the menu on the right side and the display on the right..
2.) The alv display i am getting has a scroll bar at the webpage level..
I want both horizontal and vertical scroll bar at the alv level so that the alv fits into the webpage size
Can somebody advice..
Urgently needed..
Best Regards,
Navin Fernandes.

Hi,
For ALV Scrollbar you can try this trick, maybe it will work:
Create a Transparent Container - assign fixed width and height to it and enable scrolling.
Now embed you view Container containing ALV view inside this Transparent Container.
Hope this helps..
Regards
Manas Dua

Similar Messages

Formatting webI issue: page size such as othe normal US sizes are missing.

In a WebI report formatting "//page layout > page size", the report page size issue of other normal US sizes are missing. Such as: 11x17 inches. Is there a way we can include these page sizes?

I face a somewhat similar issue. We have existing reports in Reporting Services - that can present the complete data in one page PDF and similar page creation in webi is just not possible. With sections and data seperation the whole report comes in 3 or 4 pages and no recourse to manipulate page size.
I hope BO provides more enhancements to Webi - once adhoc users start creating reports they expect to see formatting that's traditionally present in canned reports

Altering blog format and querying page size

Good morning all
Two quick questions - I have had a search around the forums for these but haven't found anything relevant, so here are my quesitons:
1) Is it possible to format the way that blog entries appear on the main blog page? Inspector of course allows small tweaks such as number of entries to show, and length of entries, but I wanted to know if it was possible to perhaps lose the left side photo thumbnail space altogether so that the blog entry/text itself takes up the entire width of the page. Also, is it possible to have the photo-thumbnail link photo on the right hand side of the main blog page, instead of on the left hand side? (Hopefully this question makes sense)
2. Back in the days of when I used Frontpage, it had a handy little feature which would let you know how large the page you were working on was (in KB) and would tell you how many seconds it would take to load using a dialup modem. Is there any such feature un iWeb (like a "page info" selection?
Many thanks
Narly

Hi Narly,
In answer to:
but I wanted to know if it was possible to perhaps lose the left side photo thumbnail space altogether so that the blog entry/text itself takes up the entire width of the page.
Yes it is, simply delete the picture from the Entry page and it wont show up on the main blog page. You can then insert an image if you want one on the entry page and it will not show up, just dont drop it into the default imageholder (which wont be there because you have deleted it!).
Also, is it possible to have the photo-thumbnail link photo on the right hand side of the main blog page, instead of on the left hand side?
Different templates put the picture on different sides.
2. Not that I am aware of!
Will
1GHz G4, 15" PowerBook, Airport Network, 1G iPod Mini Mac OS X (10.4.6) www.willg4pb.com for iWeb tips

New file per page break

Is there a way to have a Crystal Report export a seperate PDF or other format file per page break in the report?

Hi Bill,
According to my understanding you have a report running into multiple pages and you would like it to have exported on different PDFu2019s.
I have done a quick test and we cannot have a different PDF for each page break in the report. When we export a report that will export the whole report.
I hope this helps you.
Regards,
Prashant

Since downloading the 2013 Keynote upgrade, the slide image size on handouts with 3 slides per page option is very small. Is there a way to make the slide size larger while still keeping 3 slides per page lines?

With the new Keynote upgrade (version 6.1), the slide image size on handouts is very small, which makes it difficult to read slide content when compiling lecture notes for students. Is there a way to make the slide size larger while still keeping to a format of 3 slides per page with lines?

A number of posts have reported the same issue, two workarounds:
1
check the paper handling options or equivalent in your print dialogue box and set to scale to fit
2
in the Keynote option, in the dropdown menu in the Print section, select Individual Slides
then choose Layout, and set the number of pages, when printed you will have multiple pages on a single sheet.

How to give no of lines per page in alv report

hi
could anybody tell me
how to give no of lines per page in alv report
i need bottom of page too
if possible plz send the code too
it ll be very helpful to me
thanx
kals.

Hi,
This is possible, using some of the events in the ALV.
You could use AFTER_LINE_OUTPUT event and call you form after say, a certain line count is reached on the list output.
MOVE 'AFTER_LINE_OUTPUT' TO gw_event-name.
MOVE 'AFTER_LINE_OUTPUT' TO gw_event-form.
APPEND gw_event TO gt_events.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
       EXPORTING
            it_events                = gt_events[]
and define the form for each event as follows - this would be a dynamic call by the ALV.
*&      Form after_line_output
*       Form for the After Line Output Event in the internal table
*      --> rs_lineinfo
FORM after_line_output USING rs_lineinfo TYPE slis_lineinfo.
IF sy-linno eq v_linno.          "Defaulted value for line count
    perform write_footer.
    NEW-PAGE.
ENDIF.
ENDFORM.                    " after_line_output
For lines per page:
rs_lineinfo-tabindex would give you the index of the current line in the list, which you could use to read the t_outtab table, and reduce the line count of items displayed on the earlier page.
There are a few other events too, like BEFORE_LINE_OUTPUT and END_OF_LIST which you can use as required and print the data.
Regards,
Anil.

Can I print a document formatted for a smaller page size on larger paper?

I have a document that is formatted for a small size for a booklet using a customer paper size setup, 21 x 24 cm. I want to print this on A4 paper for proofreading. But when I do so, the printer (a Brother laser printer) spits out giant pages enlarged to A4. When I try to reduce the scale percentage, it reduces down to the right font size, but reflowed into the A4 size.
Is there a way to just have it print in its true size in the middle of the A4 sheet?

You could change the percent in File > Page Setup. But I think fruhulda's suggestion of using PDF would probably result in better resolution although any enlarging will likely cause some loss.

Print multiples of the same image on one paper. I tried to change the layout to 9 per page, but it's only showing up and printing one per page, though it is the size i would like. But only one image is showing up as opposed to 9

I'm trying to print multiples of the same image on one paper. I tried to change the layout to 9 per page, but it's only showing up and printing one per page, though it is the size i would like. But only one image is showing up as opposed to 9. HELP!!Version 7.0 (826.4)
I'm using Preview Version 7

Hello @kgingeri1,
Welcome to the HP forums.
If you have sent a test print via ePrint, and experience this issue, i would call the Cloud Services department.
If ePrint works fine, it is definitely a Google Cloud Print issue.
Also, when you print from your android device, are you using Google Cloud print or the HP ePrint app?
Please call our Cloud Services at 855-785-2777.
If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Hours:
Mon-Fri. 8am - 11pm, Sat. 9am-8pm - EST
Mon-Fri. 7am - 10pm, Sat. 8am-7pm - CST
Mon-Fri. 6am - 9pm, Sat. 7am-6pm - MST
Mon-Fri. 5am - 8pm, Sat. 6am-5pm - PST
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

For Apple printing what is the per letter size page cost?

For Apple printing what is the per letter size page cost?

Again, what are you wanting to print?

Itsmobile Alv page size problems

Hi All
I am having 2 problems with alv grids on the itsmobile.
My first problem is with the page size, in that I now have a very large scroll area. The horizontal scroll bar is down near the status bar and I also have two vertical scroll bars that is eating into my screen size.
I have l looked at note 1356836 and I have updated the alvpagesize in my gui config but this has made no difference.
Its weird as I have buttons that appear right underneath the custom control for the alv grid and they are appearing correctly under the blank alv grid, but yet there is a large vertical scroll area on mobile screen.
My second problem is that the select all button is being displayed even though I have this turned off in the layout ( p_layout-NO_ROWMARK = abap_true.) This is causing my horizontal layout to scroll of the page as it is adding about 3 character to the width of the screen.
We are on 701 SAPKB70105.
Many thanks
Darren

Hi All
You can also copy the css file in itsmobile to your internet service.
By putting the following code into the css and updating the gui config in sicf for the internet service you can remove the vertical scroll bar.
this problem only seems to happen when you use the mobile4 gernation style.
/* --- MOBILE BODY -
.MobileHtml

PDF Page Sizes - Large format sizes missing (Acrobat Std 11)

Hi All,
We are an Architectural practice that has recently purchased a number of Acrobat Standard 11, licences. This is to supplement the 6 creative suites we already have.
We have discovered however, that Standard does not have large format page sizes available such as A2, A1, A0 etc. Why? I have installed these as standalone licences on 5 other computers to date, all with the same missing information.
The Adobe suites we have are standard and only have acrobat 9, they have these sizes, so how can a higher version have them missing?
This problem is all over the web including these forums. The latest i could find was nearly a year ago. I am hoping Adobe has created a patch to fix this problem since.
Attempts to add custom sizes to match the suites indicates they already exist! We can only create the sizes we need if we use different names, which is problematic for us as many of our settings look for this name to setup our printing.
I would appreciate any assistance in fixing this problem as
Thank you.

I have the same problem. There is a reasonably good workaround. You can permanently define as many additional pages sizes as you needed including non-standard sizes. I have one that is 36" X 90".
Here's how (I'm using Widows 7):
1. From the Start Dialog, choose Devices and Printers in the lower right.
2. On the Devices and Printers control panel right-click on Adobe PDF and select Printing Preferences
3. On the Adobe PDF Printing Preferences dialog click the "Add" button
4. On the Add Custom Paper Size dialog enter a name that will make sense to you like "A1" or, in my case "36 X 90"
5. On the Add Custom Paper Size dialog select the correct unit of measure and enter the width and height
6. On the Add Custom Paper Size dialog click the "Add/Modify" button
7. The new size is now available in the Adobe PDF Page Size drop-down. Select it. Click "OK"
8. On the Devices and Printers control panel right-click on Adobe PDF and select Printing Preferences
9. On the Adobe PDF Printing Preferences dialog you will see that the new size is NOT selected. Select it again. This time it will become the current selection. Making a paper size the current select may not be needed for all applications.
After step 6, if you open an application the new size should appear in the paper size drop-down from Print > Properties > Paper/Quality tab > Advanced button. It may also appear in the drop-down of the Adobe PDF Setting tab.
I hope this helps.
Rich

Limit rows per page, include spacer and format last row on page break

Hello,
I am new to BI and would like some help with an issue I don't seem to be able to resolve?
I have a table that uses two xml group elements (2nd nested inside first) to produce my detail lines.
Example:-
First for-each loop runs over shipto details and within this another for-each loop runs over items related to that shipto, all of which results in multiple detail lines.
I need to limit the number of rows per page and should the data roll over to the next page I need to place a horizontal closing border on the first page's table (only using column borders).
Also when the data does not fill the page I need to add spacer rows to the page limit?
I have tried using examples found in these forums, position(), counters etc… but due to having the second detail loop I’m unable to get these working or I’m doing something wrong?
Your help would be greatly appreciated.

Hi BIPuser, thanks for the links.
I have tried some of the examples which I can get working with a single level of detail lines. However when I add the second level of detail lines the position() function seems to fail as my rowlimit appears to be ignored.
I am also unable to get the $lpp example working because the outer detail loop may only have one xml element and therefore BI assumes only one line is to be printed when in fact the inner xml element detail loop may have further multiple lines. I need to effectively count the outer & inner loops as one to determine the number of lines being processed.
Example of xml - My table for detail lines needs to include both ShipTo & item number lines grouped as shown, thereby counting & outputting 7 lines in this instance.
<INVOICE>
<On_Ship_To_S23> Outer loop
<On_itm_num_shr_row_S21> Inner Loop
<On_itm_num_shr_row_S21>
<On_itm_num_shr_row_S21>
</On_Ship_To_S23>
<On_Ship_To_S23>
<On_itm_num_shr_row_S21>
<On_itm_num_shr_row_S21>
</On_Ship_To_S23>
</INVOICE>

Modification in report into ALV Format

Hi Experts
How can I modify this report in ALV Format with Top of page and Parameters should be display on runtime.
Can anyone modify my program please
Thanks in advanced.
REPORT FZEL LINE-SIZE 220 LINE-COUNT 75
         NO STANDARD PAGE HEADING.
TABLES : equi,
         equz,
         imptt,
         imrg,
         eqkt,
         iloa.
TYPES: BEGIN OF ty_data ,
         equnr      type equnr,         " Euipment no
         eqktx      type eqkt-eqktx,    " Equipment Text
         eqfnr       type iloa-eqfnr,     " Equipment Sort field
         idate      type imrg-idate,    " Measuring Date
         recdu      type imrg-recdu,    " Unit of measuring ='KM','L','H'
         recdv      type imrg-recdv,    " Counter reading data
         cancl       type imrg-cancl,
       END OF ty_data.
TYPES: BEGIN OF ty_final,
         equnr           type equnr,            " Equipment no
         eqktx           type eqkt-eqktx,       " Equipment Text
         eqfnr           type iloa-eqfnr,       " Equipment Sort field
         idate               type imrg-idate,       " Measuring Date
         min_date_km     type imrg-idate,       " Min Date
         min_km          type imrg-recdv,       " Max Km
         max_date_km     type imrg-idate,
         max_km          type imrg-recdv,       " Min km
         t_max_min_km    type imrg-recdv,       " Total min_km-max_km
         min_date_hr     type imrg-idate,       " Max Date
         min_hr          type imrg-recdv,       " Max hr
         max_date_hr     type imrg-idate,
         max_hr          type imrg-recdv,       " Min hr
         t_max_min_hr    type imrg-recdv,                " Total min_hr-max_hr
         min_date_lit    type imrg-idate,
         min_lit         type imrg-recdv,       " Min lit
         max_date_lit    type imrg-idate,
         max_lit         type imrg-recdv,       " Max lit
         fuel_con        type imrg-recdv,       " Total_hrs / t_max_min_hr
         fuel_con2       type imrg-recdv,       " Total_hrs / t_max_min_hr
         km_l            type imrg-recdv,       " t max_min_km / t_max_min_lit
         l_p             type imrg-recdv ,          " t_max_min_lit / t_max_min_hr
         l_p2            type imrg-recdv ,
       END OF ty_final.
DATA: i_data TYPE TABLE OF ty_data, " internal table
wa_data TYPE ty_data, " work area
i_final TYPE TABLE OF ty_final, " internal table
wa_final TYPE ty_final. " work area
SELECTION-SCREEN BEGIN OF BLOCK blk WITH FRAME.
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: p_equnr FOR equi-equnr OBLIGATORY, "no-extension no intervals,
                p_idate FOR imrg-idate. "NO-EXTENSION NO INTERVALS OBLIGATORY,
               "p_recdu FOR imrg-recdu." NO-EXTENSION NO INTERVALS ."default 'M3'" OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blk1.
SELECTION-SCREEN BEGIN OF BLOCK blk2 WITH FRAME TITLE text-002.
SELECTION-SCREEN END OF BLOCK blk2.
SELECTION-SCREEN END OF BLOCK blk.
TOP-OF-PAGE.
FORMAT INTENSIFIED ON.
WRITE:/55(40) ' WAGNERS INVESTMENT LIMITED '.
WRITE:/50(40) ' VEHICLE FUEL CONSUMPTION REPORT ' CENTERED   ,
          2 'Page', sy-pagno.
FORMAT INTENSIFIED OFF.
WRITE:/50(40) '----
' CENTERED .
FORMAT INTENSIFIED ON.
WRITE:/2 sy-datum COLOR 3, sy-uzeit .
"WRITE:/1 S903-SPMON ."p_yearf.
ULINE.
"CENTERED.
write: /2 'Equipment No :'left-justified,p_equnr-low color 2 , ' to   ' , p_equnr-high color 2.
write: /2 'Date From    :', p_idate-low color 2 , ' to ' , p_idate-high color 2.
"write: /2 'Sort Field:'left-justified,p_eqfnr-low color 2 , ' to   ' , p_eqfnr-high color 2.
SKIP.
ULINE.
WRITE:/1 sy-vline,
    2   ' EQUIP#',                10 sy-vline ,
    11 ' NAME',                  40 sy-vline,
    41 ' SORT',                  60 sy-vline,
    61 ' START DATE',            74 sy-vline,
    75 ' END DATE',               87 sy-vline,
    88 ' START KM',              100 sy-vline,
    101 ' END KM' ,               113 sy-vline,
    114 ' TOTAL KM',              126 sy-vline,
    127 ' START HR',              139 sy-vline,
    140 ' END HR',                152 sy-vline,
    153 ' TOTAL HR',              167 sy-vline,
    168 ' FUEL CON ',             180 sy-vline,
    181 ' KM L',                  193 sy-vline,
    194 ' LIT PER HR ',           206 sy-vline,
    207 ' EQUIP NO',              220 sy-vline,
    223 'KM L',                  232 sy-vline,
    233 'LIT PER KM',            245 sy-vline,
    246 'TOTAL L/HR',            258 sy-vline.
FORMAT COLOR 3 ON.
ULINE.
END-OF-PAGE.
START-OF-SELECTION.
select aequnr deqktx feqfnr eidate erecdu erecdv
into table i_data
from equi AS a
inner join equz as b
on aequnr = bequnr
inner join iloa as f
on biloan = filoan
inner join imptt as c
on aobjnr = cmpobj
inner join eqkt as d
on aequnr = dequnr
inner join imrg as e
on epoint = cpoint
where a~equnr in p_equnr
and
e~idate in p_idate and
e~cancl ne 'X'.
loop at i_data into wa_data.
CLEAR: wa_final.
READ TABLE i_final into wa_final
           with key equnr = wa_data-equnr." BINARY SEARCH.
    if sy-subrc EQ 0.
      PERFORM F_GET_MAX_DATA.
      PERFORM F_GET_MAX_HOURS.
      PERFORM F_GET_MAX_LIT.
      PERFORM prepare_final_rec USING'M'. " Modify Existing Record
     ElSE.
      PERFORM prepare_final_rec USING'A'. " Append New Record.
    ENDIF.
    ENDLOOP.
    LOOP AT i_final into wa_final.
on change of wa_final-equnr.
WRITE:/1 sy-vline,
2 wa_final-equnr                                                       , 10 sy-vline,
11 wa_final-eqktx                                                       , 40 sy-vline,
41 wa_final-eqfnr                                                       , 60 sy-vline,
61 wa_final-min_date_km color 2                                        , 74 sy-vline,
75 wa_final-max_date_km color 2 LEFT-JUSTIFIED                         , 87 sy-vline,
88 wa_final-min_km EXPONENT 0 DECIMALS 2 LEFT-JUSTIFIED   color 3       , 100 sy-vline,
101 wa_final-max_km EXPONENT 0 DECIMALS 2 LEFT-JUSTIFIED   color 3      , 113 sy-vline,
114 wa_final-t_max_min_km EXPONENT 0 DECIMALS 2 LEFT-JUSTIFIED          , 126 sy-vline,
127 wa_final-min_hr EXPONENT 0 DECIMALS 2 LEFT-JUSTIFIED color 4        , 139 sy-vline,
140 wa_final-max_hr EXPONENT 0 DECIMALS 2 LEFT-JUSTIFIED color 4        , 152 sy-vline,
153 wa_final-t_max_min_hr EXPONENT 0 DECIMALS 2 LEFT-JUSTIFIED          , 167 sy-vline,
168 wa_final-fuel_con2 EXPONENT 0 DECIMALS 2 LEFT-JUSTIFIED             , 180 sy-vline,
181 wa_final-km_l EXPONENT 0 DECIMALS 2 LEFT-JUSTIFIED            ,193 sy-vline,
194 wa_final-l_p2 EXPONENT 0 DECIMALS 2 LEFT-JUSTIFIED color 2        , 206 sy-vline,
207 wa_final-equnr                                                      ,220 sy-vline.
endon.
endloop.
refresh i_final.
clear i_final.
FORM F_GET_MAX_DATA.
select single MAX( eidate ) Min( eidate ) MAX( erecdv ) MIN( erecdv )
into corresponding fields of (wa_final-max_date_km,wa_final-min_date_km,wa_final-max_km ,wa_final-min_km)
from equi AS a
inner join equz as b
on aequnr = bequnr
inner join iloa as f
on biloan = filoan
inner join imptt as c
on aobjnr = cmpobj
inner join eqkt as d
on aequnr = dequnr
inner join imrg as e
on epoint = cpoint
where a~equnr in p_equnr
and
e~idate in p_idate
and
e~cancl ne 'X' and
e~recdu = 'KM'
AND a~equnr = wa_data-equnr.
ENDFORM.
FORM F_GET_MAX_HOURS.
select single MAX( erecdv ) MIN( erecdv )
into corresponding fields of (wa_final-max_hr, wa_final-min_hr)
from equi AS a
inner join equz as b
on aequnr = bequnr
inner join iloa as f
on biloan = filoan
inner join imptt as c
on aobjnr = cmpobj
inner join eqkt as d
on aequnr = dequnr
inner join imrg as e
on epoint = cpoint
where a~equnr in p_equnr
and
e~idate in p_idate
and
e~cancl ne 'X' and
e~recdu = 'H'
AND a~equnr = wa_data-equnr .
ENDFORM.
FORM F_GET_MAX_LIT.
select SUM( e~recdv )
into corresponding fields of (wa_final-fuel_con2)
from equi AS a
inner join eqkt as b
on bequnr = aequnr
inner join imptt as c
on cmpobj = aobjnr
inner join imrg as e
on epoint = cpoint
where a~equnr in p_equnr
and
e~idate in p_idate
and
e~cancl ne 'X' and
e~recdu = 'L'
AND a~equnr = wa_data-equnr.
ENDFORM.
FORM prepare_final_rec USING    p_mode TYPE char1.
wa_final-t_max_min_km = wa_final-max_km - wa_final-min_km .
wa_final-t_max_min_hr = wa_final-max_hr - wa_final-min_hr.
if wa_final-t_max_min_km <> 0 .
wa_final-km_l = ( wa_final-max_km - wa_final-min_km ) / ( wa_final-fuel_con2 ) .
ELSE.
wa_final-km_l = 0.
endif.
if wa_final-t_max_min_hr <> 0 .
wa_final-l_p2 = ( wa_final-fuel_con2 ) / ( wa_final-t_max_min_hr ) .
ELSE.
wa_final-l_p2 = 0.
endif.
IF p_mode = 'A'.
    wa_final-equnr = wa_data-equnr.
    wa_final-eqktx = wa_data-eqktx.
    wa_final-eqfnr = wa_data-eqfnr.
    wa_final-t_max_min_km = wa_final-min_km - wa_final-max_km .
    wa_final-t_max_min_hr = wa_final-max_hr - wa_final-min_hr.
    wa_final-km_l = ( wa_final-max_km - wa_final-min_km ) / ( wa_final-fuel_con2 ).
    wa_final-l_p2 = ( wa_final-fuel_con2 ) / ( wa_final-t_max_min_hr ) .
    APPEND wa_final TO i_final .
ELSE.
    MODIFY i_final FROM wa_final
      TRANSPORTING
          eqfnr
          max_date_km
          min_date_km
          max_date_lit
          min_date_lit
          max_date_hr
          min_date_hr
          max_km
          min_km
          max_hr
          min_hr
          t_max_min_km
          t_max_min_hr
          fuel_con2
          km_l
          l_p2
          where equnr = wa_data-equnr.
ENDIF.
ENDFORM.                    " PREPARE_FINAL_REC

Hi Guys
Thanks for your reply, I know how to implement the FM for ALV but little confused where to call , See my correction below it is displaying the result in different way that ie...first displaying Equipment no, name,.correctly but the other values such as km,L,HR all are displaying zero first, when I press back then it is displying the value twice thrise........keep on displaying duplicate records continuesly when back back is press can anyone correct this please
REPORT XYZ LINE-SIZE 220 LINE-COUNT 75
         NO STANDARD PAGE HEADING.
TABLES : equi,
         equz,
         imptt,
         imrg,
         eqkt,
         iloa.
type-pools: slis.                                 "ALV Declarations
TYPES: BEGIN OF ty_data ,
         equnr      type equnr,         " Euipment no
         eqktx      type eqkt-eqktx,    " Equipment Text
         eqfnr       type iloa-eqfnr,     " Equipment Sort field
         idate      type imrg-idate,    " Measuring Date
         recdu      type imrg-recdu,    " Unit of measuring ='KM','L','H'
         recdv      type imrg-recdv,    " Counter reading data
         cancl       type imrg-cancl,
       END OF ty_data.
TYPES: BEGIN OF ty_final,
         equnr           type equnr,            " Equipment no
         eqktx           type eqkt-eqktx,       " Equipment Text
         eqfnr           type iloa-eqfnr,       " Equipment Sort field
         idate               type imrg-idate,       " Measuring Date
         min_date_km     type imrg-idate,       " Min Date
         min_km          type P DECIMALS 2,       " Max Km
         max_date_km     type imrg-idate,
         max_km          type P DECIMALS 2,       " Min km
         t_max_min_km    type P DECIMALS 2,       " Total min_km-max_km
         min_date_hr     type imrg-idate,       " Max Date
         min_hr          type P DECIMALS 2,       " Max hr
         max_date_hr     type imrg-idate,
         max_hr          type P DECIMALS 2,       " Min hr
         t_max_min_hr    type P DECIMALS 2,                " Total min_hr-max_hr
         min_date_lit    type imrg-idate,
         min_lit         type P DECIMALS 2,       " Min lit
         max_date_lit    type imrg-idate,
         max_lit         type P DECIMALS 2,       " Max lit
         fuel_con        type P DECIMALS 2,       " Total_hrs / t_max_min_hr
         fuel_con2       type P DECIMALS 2,       " Total_hrs / t_max_min_hr
         km_l            type P DECIMALS 2,       " t max_min_km / t_max_min_lit
         l_p             type P DECIMALS 2 ,      " t_max_min_lit / t_max_min_hr
         l_p2            type P DECIMALS 2 ,
       END OF ty_final.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
      gd_tab_group type slis_t_sp_group_alv,
      gd_layout    type slis_layout_alv,
      gd_repid     like sy-repid.
DATA: i_data TYPE TABLE OF ty_data, " internal table
wa_data TYPE ty_data, " work area
i_final TYPE TABLE OF ty_final, " internal table
wa_final TYPE ty_final. " work area
SELECTION-SCREEN BEGIN OF BLOCK blk WITH FRAME.
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: p_equnr FOR equi-equnr OBLIGATORY, "no-extension no intervals,
                p_idate FOR imrg-idate. "NO-EXTENSION NO INTERVALS OBLIGATORY,
               "p_recdu FOR imrg-recdu." NO-EXTENSION NO INTERVALS ."default 'M3'" OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blk1.
SELECTION-SCREEN BEGIN OF BLOCK blk2 WITH FRAME TITLE text-002.
SELECTION-SCREEN END OF BLOCK blk2.
SELECTION-SCREEN END OF BLOCK blk.
TOP-OF-PAGE.
FORMAT INTENSIFIED ON.
WRITE:/55(40) ' WAGNERS INVESTMENT LIMITED '.
WRITE:/50(40) ' VEHICLE FUEL CONSUMPTION REPORT ' CENTERED   ,
          2 'Page', sy-pagno.
FORMAT INTENSIFIED OFF.
WRITE:/50(40) '----
' CENTERED .
FORMAT INTENSIFIED ON.
WRITE:/2 sy-datum COLOR 3, sy-uzeit .
"WRITE:/1 S903-SPMON ."p_yearf.
ULINE.
"CENTERED.
write: /2 'Equipment No :'left-justified,p_equnr-low color 2 , ' to   ' , p_equnr-high color 2.
write: /2 'Date From    :', p_idate-low color 2 , ' to ' , p_idate-high color 2.
END-OF-PAGE.
START-OF-SELECTION.
select aequnr deqktx feqfnr eidate erecdu erecdv
into table i_data
from equi AS a
inner join equz as b
on aequnr = bequnr
inner join iloa as f
on biloan = filoan
inner join imptt as c
on aobjnr = cmpobj
inner join eqkt as d
on aequnr = dequnr
inner join imrg as e
on epoint = cpoint
where a~equnr in p_equnr
and
e~idate in p_idate and
e~cancl ne 'X'.
loop at i_data into wa_data.
CLEAR: wa_final.
READ TABLE i_final into wa_final
           with key equnr = wa_data-equnr." BINARY SEARCH.
    if sy-subrc EQ 0.
      PERFORM F_GET_MAX_DATA.
      PERFORM F_GET_MAX_HOURS.
      PERFORM F_GET_MAX_LIT.
      PERFORM prepare_final_rec USING'M'. " Modify Existing Record
     ElSE.
      PERFORM prepare_final_rec USING'A'. " Append New Record.
      perform build_fieldcatalog.
      perform build_layout.
      perform display_alv_report.
    ENDIF.
   ENDLOOP.
refresh i_final.
clear i_final.
FORM F_GET_MAX_DATA.
select single MAX( eidate ) Min( eidate ) MAX( erecdv ) MIN( erecdv )
into   corresponding fields of (wa_final-max_date_km,wa_final-min_date_km,wa_final-max_km ,wa_final-min_km)
from equi AS a
inner join equz as b
on aequnr = bequnr
inner join iloa as f
on biloan = filoan
inner join imptt as c
on aobjnr = cmpobj
inner join eqkt as d
on aequnr = dequnr
inner join imrg as e
on epoint = cpoint
where a~equnr in p_equnr
and
e~idate in p_idate
and
e~cancl ne 'X' and
e~recdu = 'KM'
AND a~equnr = wa_data-equnr.
ENDFORM.
FORM F_GET_MAX_HOURS.
select single MAX( erecdv ) MIN( erecdv )
into corresponding fields of (wa_final-max_hr, wa_final-min_hr)
from equi AS a
inner join equz as b
on aequnr = bequnr
inner join iloa as f
on biloan = filoan
inner join imptt as c
on aobjnr = cmpobj
inner join eqkt as d
on aequnr = dequnr
inner join imrg as e
on epoint = cpoint
where a~equnr in p_equnr
and
e~idate in p_idate
and
e~cancl ne 'X' and
e~recdu = 'H'
AND a~equnr = wa_data-equnr .
ENDFORM.
FORM F_GET_MAX_LIT.
select SUM( e~recdv )
into corresponding fields of (wa_final-fuel_con2)
from equi AS a
inner join eqkt as b
on bequnr = aequnr
inner join imptt as c
on cmpobj = aobjnr
inner join imrg as e
on epoint = cpoint
where a~equnr in p_equnr
and
e~idate in p_idate
and
e~cancl ne 'X' and
e~recdu = 'L'
AND a~equnr = wa_data-equnr.
ENDFORM.
FORM prepare_final_rec USING    p_mode TYPE char1.
wa_final-t_max_min_km = wa_final-max_km - wa_final-min_km .
wa_final-t_max_min_hr = wa_final-max_hr - wa_final-min_hr.
if wa_final-t_max_min_km <> 0 .
wa_final-km_l = ( wa_final-max_km - wa_final-min_km ) / ( wa_final-fuel_con2 ) .
ELSE.
wa_final-km_l = 0.
endif.
if wa_final-t_max_min_hr <> 0 .
wa_final-l_p2 = ( wa_final-fuel_con2 ) / ( wa_final-t_max_min_hr ) .
ELSE.
wa_final-l_p2 = 0.
endif.
IF p_mode = 'A'.
    wa_final-equnr = wa_data-equnr.
    wa_final-eqktx = wa_data-eqktx.
    wa_final-eqfnr = wa_data-eqfnr.
    wa_final-t_max_min_km = wa_final-min_km - wa_final-max_km .
    wa_final-t_max_min_hr = wa_final-max_hr - wa_final-min_hr.
    wa_final-km_l = ( wa_final-max_km - wa_final-min_km ) / ( wa_final-fuel_con2 ).
gd_repid = sy-repid.
    wa_final-l_p2 = ( wa_final-fuel_con2 ) / ( wa_final-t_max_min_hr ) .
    APPEND wa_final TO i_final .
ELSE.
    MODIFY i_final FROM wa_final
      TRANSPORTING
          eqfnr
          max_date_km
          min_date_km
          max_date_lit
          min_date_lit
          max_date_hr
          min_date_hr
          max_km
          min_km
          max_hr
          min_hr
          t_max_min_km
          t_max_min_hr
          fuel_con2
          km_l
          l_p2
          where equnr = wa_data-equnr.
ENDIF.
ENDFORM.                    " PREPARE_FINAL_REC
*&      Form BUILD_FIELDCATALOG
      Build Fieldcatalog for ALV Report
form build_fieldcatalog.
              I.e. Field type may be required in-order for
                   the 'TOTAL' function to work.
fieldcatalog-fieldname   = 'EQUNR'.
fieldcatalog-seltext_m   = 'Equip no'.
fieldcatalog-tabname     = 'i_final'.
fieldcatalog-col_pos     = 0.
fieldcatalog-outputlen   = 10.
fieldcatalog-emphasize   = 'X'.
fieldcatalog-key         = 'X'.
fieldcatalog-do_sum      = 'X'.
fieldcatalog-no_zero     = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'EQKTX'.
fieldcatalog-seltext_m   = 'Description'.
    fieldcatalog-tabname     = 'i_final'.
fieldcatalog-col_pos     = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'EQFNR'.
fieldcatalog-seltext_m   = 'Sortfield'.
    fieldcatalog-tabname     = 'i_final'.
fieldcatalog-col_pos     = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MIN_DATE_KM'.
fieldcatalog-seltext_m   = 'Min Date'.
    fieldcatalog-tabname     = 'i_final'.
fieldcatalog-col_pos     = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MAX_DATE_KM'.
fieldcatalog-seltext_m   = 'Max Date'.
    fieldcatalog-tabname     = 'i_final'.
fieldcatalog-col_pos     = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MIN_KM' .
fieldcatalog-seltext_m   = 'Min KM'.
    fieldcatalog-tabname     = 'i_final'.
fieldcatalog-col_pos     = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MAX_KM' .
fieldcatalog-seltext_m   = 'Max KM'.
    fieldcatalog-tabname     = 'i_final'.
fieldcatalog-col_pos     = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'T_MAX_MIN_KM' .
    fieldcatalog-tabname     = 'i_final'.
fieldcatalog-seltext_m   = 'Total KM'.
fieldcatalog-col_pos     = 7.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MIN_HR' .
fieldcatalog-seltext_m   = 'Min Hr'.
    fieldcatalog-tabname     = 'i_final'.
fieldcatalog-col_pos     = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MAX_HR' .
fieldcatalog-seltext_m   = 'Max Hr'.
    fieldcatalog-tabname     = 'i_final'.
fieldcatalog-col_pos     = 9.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'T_MAX_MIN_HR' .
fieldcatalog-seltext_m   = 'Total HR'.
    fieldcatalog-tabname     = 'i_final'.
fieldcatalog-col_pos     = 10.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'FUEL_CON2' .
fieldcatalog-seltext_m   = 'Km/L'.
    fieldcatalog-tabname     = 'i_final'.
fieldcatalog-col_pos     = 11.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'L_P2' .
fieldcatalog-seltext_m   = 'Lit/HR'.
    fieldcatalog-tabname     = 'i_final'.
fieldcatalog-col_pos     = 12.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
      Build layout for ALV grid report
form build_layout.
gd_layout-no_input          = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text       = 'Totals'(201).
gd_layout-totals_only        = 'X'.
gd_layout-f2code            = 'DISP'. "Sets fcode for when double
                                        "click(press f2)
gd_layout-zebra             = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text       = 'helllllo'.
endform.                    " BUILD_LAYOUT
*&      Form DISPLAY_ALV_REPORT
      Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
           i_callback_top_of_page   = 'TOP-OF-PAGE' "see FORM
           i_callback_user_command = 'USER_COMMAND'
           i_grid_title           = outtext
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
           it_special_groups       = gd_tabgroup
           IT_EVENTS                = GT_XEVENTS
            i_save                  = 'X'
           is_variant              = z_template
       tables
            t_outtab                = i_final
            exceptions
            program_error           = 1
            others                  = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    " DISPLAY_ALV_REPORT

How to calculate output page size of pdf map request?

Hello,
i have a problem regarding requesting a map as pdf and the resulting page size of the pdf in MapViewer version Ver11_B071001.
i defined a bbox in srid 82015 that has a width of 297m and a height of 420m. The scale is 1:1000.
According to the documentation the standard device resolution is 96dpi, so the above bbox will result in an image with 1122 pixel width and 1587 pixel height.
A request with format="PNG_STREAM" returns an image with exact these dimensions.
But a request with format="PDF_URL" returns a pdf document which dimension is 395.8mm * 559.9mm.
I expected a dimension of 297mm * 420mm (which is DIN A3 as pagesize), so 1mm on the printed pdf equals 1000mm in the real world (scale 1:1000).
Where am i doing wrong?
Thanks for help in advance,
Dirk

Hi Dirk,
based on some comments received from the PDF group, the PDF uses "pt" as reference.
96 dpi can be said as 96 px per in
so 96 px = 1 in
1 in = 1/96 px
1 px = 0.75pt (in 96 dpi system)
1 in = 72pt
1 in = 2.54cm = 25.4mm = 0.0254m
so in your calculation, you need to multiply by 0.75 in order to convert "px" into "pt".
Joao

Multi Page - Multi Layout - Vertical panels per Page- Effect

Hi
I need to create a report which is having 4 pages - In the layout itself I need to design such way , first full page will be text -second page and third page will be with repeating frame . Fourth page will be with text.
Example in Emp Table for each dept i need to print like below
MY query is select empno, ename, job, dept from emp ( with group above Dept no, Job)
And Lay out design as below :
First Page - Only Dept no - with other predefined texts.
Second Page & Third page - data will be printed (fetched) from repeating frame.
Fourth page - Only Dept no - with other predefined texts.
I need above report for all dept in emp table
So i changed the Vertical panels per page of the reports main section to 4 . and size to 36 (4*9), but when I runt the report getting error
REP-1814-Report Cannot be formatted,Object Horizontally and vertically can never fit witing R_G_JOB.
Any help to fix this issue.
Thanks in Advance .....
Edited by: O.Developer on Feb 15, 2013 2:45 AM

Hi
Thanks for your suggestion.
However we have conluded the answer with my manager' help.
Here is how :
After spending many hours, finally we didi as below :
Develop Data model with relevent query.
Develop report laoyout using reportg wizard with 'No Template'(do not make manual layout).
Now select the very first outer frame and extend this frame to three or four pages as per requirement.
(Do not change any other layout coordinae values)
Now run the report, the report will give expected output.
-----------------

ALV FORMATTING AS PER PAGE SIZE

Similar Messages

Maybe you are looking for