ALV GRID Display using oops in sub screen in which sub screen is in tab

Hi Mac,
My requirement is to display an ALV Grid with data in a subscreen which is called in tab strip.
Could you please help me the code of how actaully i can call th ALV in the tab.
I want to display one field in editable and remaining 4 fields in display mode.
Does any one had faced the same issue.This is standard program cloning object.
Thanks
Satish Raju

what is the question? Callin grid in subscreen is the same as in other screen. Create PBO module for creating the grid, PAI to evaluate comands.
Regards,
Clemens

Similar Messages

  • Problem in displaying Alv grid output  using oops........

    hi,
    i have two problems in displaying ALV grid output Using Oops.
    1) How to modify the fieldcatalog after we getting a field catalog using general FM.
    2) initialy it is displaying 13 fields but there are 63 fields .
       eventhough we chage the layout to 63 fields it is displaying only 13 fields , these 13 fields may be different based on our selection but count  of displayed fileds are same . how can display 63 fields at a time .

    Hi,
    You can chnage using below code:
    loop at gt_fieldcat.
    if <gt_fieldcat-field_name> = 'FIELDNAME'.
    endif.
    modify gt_fieldcat.
    clear gt_fieldcat.
    endloop.
    Make sure that all the field should not have no_out = 'X' and tech = 'X'.
    Thanks,
    Sriram Ponna.

  • ALV Grid Report using OOPS

    Hi Friends,
    I have to develop the ALV Grid report using the Classes ie OOPS, as i am new to OOPS and know little bit of ALV,  so it will be little bit tough to develop the object so plz try to solve my query. I'm sending the Functional specs:
    The program should display the list of Purchase orders and Purchase requisitions created for specified materials. The output should be displayed in form of ALV grid. There should be separate ALV Grid for Purchase order and Purchase requisition list. The user should also have an option to save various ALV layouts and should be able to choose the ALV layout on the selection screen.The user should be able to navigate to the relevant document form the ALV grid. (Use hyperlink).
    The output must appear in the same screen.     
    Selection screen fields–
         Material Number
         Creation date (For both, PR and PO)
         Output fields –
              List one –
                  Po Number
                                        Po Item number
                                        Vendor
                                        Date
                                        Material Number
                                        Material Quantity
              List two –
                             PR Number
                                        Material Number
                                        Material Quantity
                                        Release status
                                        Date
                                        Reference
         Tables:  EKPO, EKKO, EBAN
         Transactions: ME23N
    HINT –      Use class - CL_GUI_ALV_GRID
    thnks in advance.....

    Hi,
    Check out these standard reports, they are enough to help you out .
    BCALV_GRID_01
    BCALV_GRID_02
    BCALV_GRID_03
    BCALV_GRID_04
    BCALV_GRID_05
    BCALV_GRID_06
    BCALV_GRID_07
    BCALV_GRID_08
    BCALV_GRID_09
    BCALV_GRID_10
    BCALV_GRID_11
    BCALV_GRID_AND_POPUP
    BCALV_GRID_DEMO
    Regards,
    Amit

  • ALV GRID DISPLAY USING FACTORY METHODS

    Hi all
    I am using factory methods for my alv grid display.
    I have a list of functionalities, for which i am not able to find a correct method..
    1) Header of alv(with all the values of the selection-screen)
    2)How to give text to a subtotal(ed) column, i.e. if i subtotal a qty field against a sorted field, i want to display ==> Nett Wt. = 123.00 (for first header entry) and so on for each header entry.
    3)how to remove the zeroes from a quantity field?
    4) Displaying the cells as blanks where data is 0( for quantity fields if i have a cell with zero value, it should be blank.)
    5) double click on a cell to open a transaction with the cell's value.
    Any help on this would be appreciated.
    Points will be rewarded for sure...
    Thanks & Regards
    Ravish Garg

    Hello Ravish
    Regarding the display of zero values as empty cells have a look at my <i>modified </i>sample report <b>ZUS_SDN_CL_SALV_TABLE_INTERACT</b>.
    *& Report  ZUS_SDN_CL_SALV_TABLE_INTERACT
    REPORT  zus_sdn_cl_salv_table_interact.
    TYPE-POOLS: abap.
    DATA:
      gt_knb1        TYPE STANDARD TABLE OF knb1.
    DATA:
      go_table       TYPE REF TO cl_salv_table,
      go_events      TYPE REF TO cl_salv_events_table.
    *       CLASS lcl_eventhandler DEFINITION
    CLASS lcl_eventhandler DEFINITION.
      PUBLIC SECTION.
        CLASS-METHODS:
          handle_double_click FOR EVENT
              if_salv_events_actions_table~double_click
              OF cl_salv_events_table
              IMPORTING
                row
                column.
    ENDCLASS.                    "lcl_eventhandler DEFINITION
    *       CLASS lcl_eventhandler IMPLEMENTATION
    CLASS lcl_eventhandler IMPLEMENTATION.
      METHOD handle_double_click.
    *   define local data
        DATA:
          lo_table   TYPE REF TO cl_salv_table,
          lt_orders  TYPE STANDARD TABLE OF bapiorders,
          ls_knb1    TYPE knb1.
        READ TABLE gt_knb1 INTO ls_knb1 INDEX row.
        IF ( syst-subrc = 0 ).
          CALL FUNCTION 'BAPI_SALESORDER_GETLIST'
            EXPORTING
              customer_number             = ls_knb1-kunnr
              sales_organization          = '1000'
    *         MATERIAL                    =
    *         DOCUMENT_DATE               =
    *         DOCUMENT_DATE_TO            =
    *         PURCHASE_ORDER              =
    *         TRANSACTION_GROUP           = 0
    *         PURCHASE_ORDER_NUMBER       =
    *       IMPORTING
    *         RETURN                      =
            TABLES
              sales_orders                = lt_orders.
    *     Create ALV grid instance
          TRY.
              CALL METHOD cl_salv_table=>factory
    *        EXPORTING
    *          LIST_DISPLAY   = IF_SALV_C_BOOL_SAP=>FALSE
    *          R_CONTAINER    =
    *          CONTAINER_NAME =
                IMPORTING
                  r_salv_table   = lo_table
                CHANGING
                  t_table        = lt_orders.
            CATCH cx_salv_msg .
          ENDTRY.
          lo_table->display( ).
    **      SET PARAMETER ID 'BUK' FIELD ls_knb1-bukrs.
    **      SET PARAMETER ID 'KUN' FIELD ls_knb1-kunnr.
    **      CALL TRANSACTION 'XD03' AND SKIP FIRST SCREEN.
        ENDIF.
      ENDMETHOD.                    "handle_double_click
    ENDCLASS.                    "lcl_eventhandler IMPLEMENTATION
    START-OF-SELECTION.
      SELECT        * FROM  knb1 INTO TABLE gt_knb1
             WHERE  bukrs  = '1000'.
    * Create ALV grid instance
      TRY.
          CALL METHOD cl_salv_table=>factory
    *    EXPORTING
    *      LIST_DISPLAY   = IF_SALV_C_BOOL_SAP=>FALSE
    *      R_CONTAINER    =
    *      CONTAINER_NAME =
            IMPORTING
              r_salv_table   = go_table
            CHANGING
              t_table        = gt_knb1.
        CATCH cx_salv_msg .
      ENDTRY.
    * Create event instance
      go_events = go_table->get_event( ).
    * Set event handler
      SET HANDLER:
        lcl_eventhandler=>handle_double_click FOR go_events.
      PERFORM modify_columns.
      go_table->display( ).
    END-OF-SELECTION.
    *&      Form  MODIFY_COLUMNS
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM modify_columns .
    * define local data
      DATA:
        lt_dfies        TYPE ddfields,
        ls_dfies        TYPE dfies,
        lo_typedescr    TYPE REF TO cl_abap_typedescr,
        lo_strucdescr   TYPE REF TO cl_abap_structdescr,
        lo_tabledescr   TYPE REF TO cl_abap_tabledescr,
        lo_columns      TYPE REF TO cl_salv_columns_table,
        lo_column       TYPE REF TO cl_salv_column.
      lo_columns = go_table->get_columns( ).
      lo_typedescr = cl_abap_typedescr=>describe_by_data( gt_knb1 ).
      lo_tabledescr ?= lo_typedescr.
      lo_strucdescr ?= lo_tabledescr->get_table_line_type( ).
      lt_dfies = lo_strucdescr->get_ddic_field_list( ).
      LOOP AT lt_dfies INTO ls_dfies.
        lo_column = lo_columns->get_column( ls_dfies-fieldname ).
        IF ( ls_dfies-keyflag = abap_true ).
          CONTINUE.
        ELSEIF ( ls_dfies-fieldname = 'WEBTR' ).  " Bill of ex. limit
          lo_column->set_zero( if_salv_c_bool_sap=>true ).   " display zero
          lo_column->set_zero( if_salv_c_bool_sap=>false ).  " hide zero
        ELSE.
          lo_column->set_technical( if_salv_c_bool_sap=>true ).  " hide col
        ENDIF.
      ENDLOOP.
    ENDFORM.                    " MODIFY_COLUMNS
    Regards
      Uwe

  • Error in field catalog in ALV grid display using classes at do_sum = "X'.

    Hi,
    I'm using classes in ALV Grid display.
    the code for the field catalog is going to dump because of the statement in the field catalog for field 'netwr',do_sum = 'X'.
    that do_sum = 'X' is not working and going to dump when executed.with out that do_sum it is working fine. the error in dump analysys is showing sap standard incude LSLVCF01.
        assign component
               <ls_fieldcat>-fieldname of structure rt_data to <g_field>.
        if sy-subrc ne 0.
          message x000(0k).
        endif.
    sy-subrc is 4 when the program is being executed.
    CODE:
    FORM prepare_field_catalog CHANGING pt_fieldcat TYPE lvc_t_fcat.
      DATA ls_fcat TYPE lvc_s_fcat.
      ls_fcat-fieldname = 'VBELN1'.
      ls_fcat-ref_field = 'VBELN'.
      ls_fcat-ref_table = 'VBRK'.
      ls_fcat-coltext = 'Invoice No'.
      ls_fcat-seltext = 'Invoice No'.
      APPEND ls_fcat TO pt_fieldcat.
      CLEAR ls_fcat.
      ls_fcat-fieldname = 'BUDAT'.
      ls_fcat-ref_table = 'BKPF'.
      ls_fcat-coltext = 'Invoice Date'.
      ls_fcat-seltext = 'Invoice Date'.
      APPEND ls_fcat TO pt_fieldcat.
      CLEAR ls_fcat.
    ls_fcat-fieldname = 'NETWR'.
      ls_fcat-ref_field = 'NETWR'.
      ls_fcat-ref_table = 'VBRK'.
      ls_fcat-coltext = 'Value of Invoice'.
      ls_fcat-seltext = 'Value of Invoice'.
      ls_fcat-datatype = 'CURR'.
      ls_fcat-do_sum = 'X'.
      APPEND ls_fcat TO pt_fieldcat.
      CLEAR ls_fcat.
    ENDFORM.
    can u please look in the code and rectify the error,
    would appeciate ur response.
    regards,
    veera.

    Hi,
    try this..
    ls_fcat-fieldname = 'NETWR'.
    ls_fcat-ref_field = 'NETWR'.
    ls_fcat-ref_table = 'VBRK'.
    ls_fcat-coltext = 'Value of Invoice'.
    ls_fcat-seltext = 'Value of Invoice'.
    ls_fcat-datatype = 'CURR'.
    ls_fcat-do_sum = 'X'.
    <b>ls_fcat-cfieldname = 'WAERS'.</b>
    APPEND ls_fcat TO pt_fieldcat.
    CLEAR ls_fcat.
    Regards
    vijay

  • Editable Field in ALV TREE Display Using OOPs

    Hi,
    I am trying to make a field editable on the ALV Tree display. I could create an editable check box. But could not make a field Editable. I have made EDIT = 'X' in the fieldcatalog for the particular field. but  it is not working.
    Please help me in solving this. Its very urgent.

    You do this with the following code example
      DATA: ls_layout TYPE lvc_s_layi.
      CLEAR ls_layout.
      ls_layout-class     = cl_item_tree_control=>item_class_text.
      ls_layout-editable   = 'X'.
      ls_layout-fieldname = your fieldname.
      APPEND ls_layout TO lt_layout.
    add PO header to tree
          CALL METHOD tree->add_node
            EXPORTING
              i_relat_node_key = space
              i_relationship   = cl_gui_column_tree=>relat_last_child
              i_node_text      = l_node_text
              is_outtab_line   = ls_po_item
              is_node_layout   = wa_layout_node
              it_item_layout   = lt_layout
    Roy

  • Sum in ALV grid display using objects

    Hi Experts,
    I have created a Report with ALV using objects and also am able to get SUM for some fields using do_sum = 'X'.
    My problem is i want to do some calculation using the total amount which i have got, how can i do that (or can it be done??).
    Thanks in Advance...
    Santosh

    Hi this may be of some help.
    ABAP List Viewer
    The common features of report are column alignment, sorting, filtering, subtotals, totals etc. To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).
    This helps us to implement all the features mentioned very effectively.
    Using ALV, We can have three types of reports:
    1. Simple Report
    2. Block Report
    3. Hierarchical Sequential Report
    There are some function modules which will enable to produce the above reports without much effort.
    All the definitions of internal tables, structures and constants are declared in a type-pool called SLIS.
    1. SIMPLE REPORT.
    The important function modules are
    a. Reuse_alv_list_display
    b. Reuse_alv_fieldcatalog_merge
    c. Reuse_alv_events_get
    d. Reuse_alv_commentary_write
    e. Reuse_alv_grid_display
    A. REUSE_ALV_LIST_DISPLAY : This is the function module which prints the data.
    The important parameters are :
    I. Export :
    i. I_callback_program : report id
    ii. I_callback_pf_status_set : routine where a user can set his own pf status or change the functionality of the existing pf status
    iii. I_callback_user_command : routine where the function codes are handled
    iv. I_structure name : name of the dictionary table
    v. Is_layout : structure to set the layout of the report
    vi. It_fieldcat : internal table with the list of all fields and their attributes which are to be printed (this table can be populated automatically by the function module REUSE_ALV_FIELDCATALOG_MERGE
    vii. It_events : internal table with a list of all possible events of ALV and their corresponding form names.
    II. Tables :
    i. t_outtab : internal table with the data to be output
    B. REUSE_ALV_FIELDCATALOG_MERGE : This function module is used to populate a fieldcatalog which is essential to display the data in ALV. If the output data is from a single dictionary table and all the columns are selected, then we need not exclusively create the field catalog. Its enough to mention the table name as a parameter(I_structure name) in the REUSE_ALV_LIST_DISPLAY. But in other cases we need to create it.
    The Important Parameters are :
    I. Export :
    i. I_program_name : report id
    ii. I_internal_tabname : the internal output table
    iii. I_inclname : include or the report name where all the dynamic forms are handled.
    II Changing
    ct_fieldcat : an internal table with the type SLIS_T_FIELDCAT_ALV which is
    declared in the type pool SLIS.
    C. REUSE_ALV_EVENTS_GET : Returns table of possible events for a list type
    Parameters :
    I. Import :
    Et_Events : The event table is returned with all possible CALLBACK events
    for the specified list type (column 'NAME'). For events to be processed by Callback, their 'FORM' field must be filled. If the field is initialized, the event is ignored. The entry can be read from the event table, the field 'FORM' filled and the entry modified using constants from the type pool SALV.
    II. Export :
    I_List_type :
    0 = simple list REUSE_ALV_LIST_DISPLAY
    1 = hierarchcal-sequential list REUSE_ALV_HIERSEQ_LIST_DISPLAY
    2 = simple block list REUSE_ALV_BLOCK_LIST_APPEND
    3 = hierarchical-sequential block list
    REUSE_ALV_BLOCK_LIST_HS_APPEND
    D. REUSE_ALV_COMMENTARY_WRITE : This is used in the Top-of-page event to print the headings and other comments for the list.
    Parameters :
    I. it_list_commentary : internal table with the headings of the type slis_t_listheader.
    This internal table has three fields :
    Typ : ‘H’ – header, ‘S’ – selection , ‘A’ - action
    Key : only when typ is ‘S’.
    Info : the text to be printed
    E. REUSE_ALV_GRID_DISPLAY : A new function in 4.6 version, to display the results in grid rather than as a preview.
    Parameters : same as reuse_alv_list_display
    This is an example for simple list.
    2. BLOCK REPORT
    This is used to have multiple lists continuously.
    The important functions used in this report are:
    A. REUSE_ALV_BLOCK_LIST_INIT
    B. REUSE_ALV_BLOCK_LIST_APPEND
    C. REUSE_ALV_BLOCK_LIST_HS_APPEND
    D. REUSE_ALV_BLOCK_LIST_DISPLAY
    A. REUSE_ALV_BLOCK_LIST_INIT
    Parameters:
    I. I_CALLBACK_PROGRAM
    II. I_CALLBACK_PF_STATUS_SET
    III. I_CALLBACK_USER_COMMAND
    This function module is used to set the default gui status etc.
    B. REUSE_ALV_BLOCK_LIST_APPEND
    Parameters :
    Export :
    I. is_layout : layout settings for block
    II. it_fieldcat : field catalog
    III. i_tabname : internal table name with output data
    IV. it_events : internal table with all possible events
    Tables :
    i. t_outtab : internal table with output data.
    This function module adds the data to the block.
    Repeat this function for all the different blocks to be displayed one after the other.
    C. REUSE_ALV_BLOCK_LIST_HS_APPEND
    This function module is used for hierarchical sequential blocks.
    D. REUSE_ALV_BLOCK_LIST_DISPLAY
    Parameters : All the parameters are optional.
    This function module display the list with data appended by the above function.
    Here the functions REUSE_ALV_FIELDCATALOG_MERGE, REUSE_ALV_EVENTS_GET, REUSE_ALV_COMMENTARY_WRITE can be used.
    3. Hierarchical reports :
    Hierarchical sequential list output.
    The function module is
    A. REUSE_ALV_HIERSEQ_LIST_DISPLAY
    Parameters:
    I. Export:
    i. I_CALLBACK_PROGRAM
    ii. I_CALLBACK_PF_STATUS_SET
    iii. I_CALLBACK_USER_COMMAND
    iv. IS_LAYOUT
    v. IT_FIELDCAT
    vi. IT_EVENTS
    vii. i_tabname_header : Name of the internal table in the program containing the
    output data of the highest hierarchy level.
    viii. i_tabname_item : Name of the internal table in the program containing the
    output data of the lowest hierarchy level.
    ix. is_keyinfo : This structure contains the header and item table field
    names which link the two tables (shared key).
    II. Tables
    i. t_outtab_header : Header table with data to be output
    ii. t_outtab_item : Name of the internal table in the program containing the
    output data of the lowest hierarchy level.
    slis_t_fieldcat_alv : This internal table contains the field attributes. This internal table can be populated automatically by using ‘REUSE_ALV_FIELDCATALOG_MERGE’.
    Important Attributes :
    A. col_pos : position of the column
    B. fieldname : internal fieldname
    C. tabname : internal table name
    D. ref_fieldname : fieldname (dictionary)
    E. ref_tabname : table (dictionary)
    F. key(1) : column with key-color
    G. icon(1) : icon
    H. symbol(1) : symbol
    I. checkbox(1) : checkbox
    J. just(1) : (R)ight (L)eft (C)ent.
    K. do_sum(1) : sum up
    L. no_out(1) : (O)blig.(X)no out
    M. outputlen : output length
    N. seltext_l : long key word
    O. seltext_m : middle key word
    P. seltext_s : short key word
    Q. reptext_ddic : heading (ddic)
    R. ddictxt(1) : (S)hort (M)iddle (L)ong
    S. datatype : datatype
    T. hotspot(1) : hotspot
    with regards,
    Hema Sundara.
    pls reward if u find it helpful.

  • Alv grid display in subscreen

    Hi ,
           How can I display ALV grid display in subscreen area that is called in main screen .?
    Thanx in advance  .

    Hi Pallavi,
    Use these parameters in Alv Fm
      I_SCREEN_START_COLUMN             = 0
      I_SCREEN_START_LINE               = 0
      I_SCREEN_END_COLUMN               = 0
      I_SCREEN_END_LINE                 = 0
    Hope this will help you.
    Regards,
    Vijay

  • Drill down capabilities for an alv grid display field using oops concept

    Hi All,
    could anyone help me in how to achieve the drill down capabilities for an alv grid display field using oops concept.
    Thanks & Regards,
    padmasri.

    padmasri,
    Hope your requirement is something like, when you click on a sales order number it should display that order (VA03), in a grid output displayed using set_table_for_first_display.
    you can acheive it using event double click.
    *&            L O C A L  C L A S S E S   -   D E F I N I T O N         *
    class lcl_event_receiver: local class to handle event DOUBLE_CLICK
    CLASS LCL_EVENT_RECEIVER DEFINITION.
      PUBLIC SECTION.
        METHODS:
        HANDLE_DOUBLE_CLICK
            FOR EVENT DOUBLE_CLICK OF CL_GUI_ALV_GRID
                IMPORTING E_ROW E_COLUMN.
      PRIVATE SECTION.
    ENDCLASS.                    "lcl_event_receiver DEFINITION
    *&    L O C A L  C L A S S E S   -   I M P L E M E N T A T I O N       *
    CLASS LCL_EVENT_RECEIVER IMPLEMENTATION.
      METHOD HANDLE_DOUBLE_CLICK.
        PERFORM HANDLE_DOUBLE_CLICK USING E_ROW
                                          E_COLUMN.
      ENDMETHOD.                           "handle_double_click
    ENDCLASS.                    "lcl_event_receiver IMPLEMENTATION
    FORM HANDLE_DOUBLE_CLICK USING E_ROW    TYPE LVC_S_ROW
                                   E_COLUMN TYPE LVC_S_COL.
      DATA: LS_DETAIL LIKE LINE OF T_OUTPUT.
          WHEN 'T_OUTPUT'.
            READ TABLE T_OUTPUT   INDEX E_ROW-INDEX INTO LS_DETAIL.
    If clicked on PO Number or PO Item, call ME23
        IF E_COLUMN-FIELDNAME = 'EBELN' OR
           E_COLUMN-FIELDNAME = 'EBELP' .
          SET PARAMETER ID 'BES' FIELD LS_DETAIL-EBELN.
          SET PARAMETER ID 'BSP' FIELD LS_DETAIL-EBELP.
          CALL TRANSACTION 'ME23' AND SKIP FIRST SCREEN.
    If clicked on sales order number or item, call VA03
        ELSEIF E_COLUMN-FIELDNAME = 'VBELN' OR
               E_COLUMN-FIELDNAME = 'POSNR'.
          SET PARAMETER ID 'AUN' FIELD LS_DETAIL-VBELN.
          SET PARAMETER ID 'APO' FIELD LS_DETAIL-POSNR.
          CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
    Hope this helps

  • Toolbar in alv display using oops alv

    i have written code for displaying toolbar in alv display using oops, but it is not displaying please find the below code and let me know reason.
    *& Report  ZTRANSFER_ORDER2                                            *
    REPORT  ZTRANSFER_ORDER2   .
    *& Report  ZTRANSFER_ORDER                                             *
       TABLES:sflight.
       TYPE-POOLS : icon.
      * G L O B A L   I N T E R N  A L   T A B L E S
    CLASS lcl_event_receiver DEFINITION DEFERRED.
    types : begin of ty_mara,
            matnr type matnr,
            mtart type mtart,
            mbrsh type mbrsh,
            matkl type matkl,
            bismt type bismt,
            meins type meins,
            end of ty_mara.
      DATA: t_mara type STANDARD TABLE OF ty_mara.
      * G L O B A L   D A T A
       DATA: ok_code LIKE sy-ucomm,
             g_wa_mara type ty_mara.
        DATA : t_fcat type LVC_T_FCAT.
      DATA  : l_VAR TYPE disvariant.
      DATA :  gs_layout type lvc_s_layo.
      * Declare reference variables to the ALV grid and the container
    G L O B A L   D A T A
      DATA: ok_code LIKE sy-ucomm.
    Declare reference variables to the ALV grid and the container
       DATA:
         go_grid             TYPE REF TO cl_gui_alv_grid,
         go_custom_container TYPE REF TO cl_gui_custom_container.
      data :  it_toolbar  TYPE stb_button,
      event_receiver TYPE REF TO lcl_event_receiver.
      * S T A R T - O F - S E L E C T I O N.
       START-OF-SELECTION.
        CALL SCREEN 100   .
    *CLASS lcl_event_receiver DEFINITION.
    CLASS lcl_event_receiver DEFINITION.
    PUBLIC SECTION.
        CLASS-METHODS:
    *handling toolbar for interactive
         handle_toolbar
            FOR EVENT toolbar OF cl_gui_alv_grid
                IMPORTING e_object e_interactive,
    *handling menu button
         handle_menu_button
            FOR EVENT menu_button OF cl_gui_alv_grid
                IMPORTING e_object e_ucomm,
    *On click of the menu button
        handle_user_command
            FOR EVENT user_command OF cl_gui_alv_grid
                IMPORTING e_ucomm.
        PRIVATE SECTION.
        ENDCLASS.
    CLASS lcl_event_receiver IMPLEMENTATION.
    METHOD handle_toolbar.
    handle toolbar
    CLEAR it_toolbar.
    MOVE 'DETAIL' TO it_toolbar-function.
        MOVE icon_detail TO it_toolbar-icon.
        MOVE 2 TO it_toolbar-butn_type.
        APPEND it_toolbar TO e_object->mt_toolbar.
        ENDMETHOD.                    "handle_toolbar
        METHOD handle_menu_button.
    handle own menubuttons
        IF e_ucomm = 'DETAIL'.
          CALL METHOD e_object->add_function
            EXPORTING
              fcode = 'DISPLAY'
              text  = 'DISPLAY'.
        ENDIF.
      ENDMETHOD.                    "handle_menu_button
      METHOD handle_user_command.
    *On click
        CASE e_ucomm.
          WHEN 'DISPLAY'.
            MESSAGE 'Menu Clicked' TYPE 'I'.
        ENDCASE.
      ENDMETHOD.                           "handle_user_command
    ENDCLASS.                    "lcl_event_receiver IMPLEMENTATION
      *&      Module  USER_COMMAND_0100  INPUT
      MODULE user_command_0100 INPUT.
        CASE ok_code.
          WHEN 'EXIT'.
            LEAVE TO SCREEN 0.
        ENDCASE.
      ENDMODULE.                 " USER_COMMAND_0100  INPUT
      *&      Module  STATUS_0100  OUTPUT
       MODULE status_0100 OUTPUT.
        sET PF-STATUS 'STATUS'.
    Create objects
         IF go_custom_container IS INITIAL.
           CREATE OBJECT go_custom_container
             EXPORTING container_name = 'ALV_CONTAINER'.
           CREATE OBJECT go_grid
             EXPORTING
               i_parent = go_custom_container.
           PERFORM load_data_into_grid.
         ENDIF.
       ENDMODULE.                 " STATUS_0100  OUTPUT
      *&      Form  load_data_into_grid
       FORM load_data_into_grid.
    Read data from table SFLIGHT
         SELECT matnr mtart mbrsh matkl bismt meins
           FROM mara
           INTO corresponding fields of TABLE t_mara.
       PERFORM fld_cate changing T_fcat.
        l_var-report = sy-repid.
      gs_layout-grid_title = 'Analysis Report'.
    gs_layout-NO_TOOLBAR = 'X'.
    gs_layout-BOX_FNAME = 'Selection'.
    Load data into the grid and display them
            caLL METHOD go_grid->set_table_for_first_display
            EXPORTING
            i_structure_name = 'S_MVKE'
              i_save          = 'A'
               is_variant       = l_var
                is_layout             = gs_layout
           CHANGING
             it_outtab        = t_mara[]
             it_fieldcatalog  = t_fcat.
      endform.
    *&      Module  pai  INPUT
          text
    MODULE pai INPUT.
    data: l_valid type c.
       clear ok_code.
       break-point.
       ok_code = sy-ucomm.
           CASE ok_code.
           WHEN 'EXIT'.
             LEAVE TO SCREEN 0.
           WHEN 'BACK'.
             call method go_grid->check_changed_data
                 importing
                    e_valid = l_valid.
            loop at t_mara into g_wa_mara.
            endloop.
         ENDCASE.
    ENDMODULE.                 " pai  INPUT
    *&      Form  fld_cate
          text
         <--P_T_FCAT  text
    FORM fld_cate  CHANGING P_T_FCAT  TYPE lvc_t_fcat.
    DATA : s_fcat type LVC_S_FCAT .
    REFRESH: t_fcat.
      CLEAR s_fcat.
    s_fcat-fieldname = 'BOX1'.
    s_fcat-coltext =   'Box1'.
    s_fcat-seltext =   'Box1'.
    s_fcat-CHECKBOX = 'X'.
    s_fcat-EDIT = 'X'.
    APPEND s_fcat TO P_T_FCAT.
      CLEAR s_fcat.
      s_fcat-row_pos = 1.
      s_fcat-col_pos = 1.
      s_fcat-fieldname = 'MATNR'.
      s_fcat-ref_field = 'MATNR'.
      s_fcat-ref_table = 'T_MARA'.
      s_fcat-coltext =   'Material'.
      s_fcat-seltext =   'Material'.
    s_fcat-EDIT = 'X'.
      APPEND s_fcat TO P_T_FCAT.
      CLEAR s_fcat.
       s_fcat-row_pos = 2.
      s_fcat-col_pos = 2.
      s_fcat-fieldname = 'MTART'.
      s_fcat-ref_field = 'MTART'.
      s_fcat-ref_table = 'T_MARA'.
      s_fcat-coltext =   'Material type'.
      s_fcat-seltext =   'Material type'.
      APPEND s_fcat TO P_T_FCAT.
    CLEAR s_fcat.
    s_fcat-fieldname = 'BOX2'.
    s_fcat-coltext =   'Box2'.
    s_fcat-seltext =   'Box2'.
    s_fcat-CHECKBOX = 'X'.
    s_fcat-EDIT = 'X'.
    APPEND s_fcat TO P_T_FCAT.
      CLEAR s_fcat.
      s_fcat-row_pos = 3.
      s_fcat-col_pos = 3.
      s_fcat-fieldname = 'MBRSH'.
      s_fcat-ref_field = 'MBRSH'.
      s_fcat-ref_table = 'T_MARA'.
      s_fcat-coltext =   'Industry Sector'.
      s_fcat-seltext =   'Industry Sector'.
      APPEND s_fcat TO P_T_FCAT.
      CLEAR s_fcat.
        s_fcat-row_pos = 4.
      s_fcat-col_pos = 4.
      s_fcat-fieldname = 'MATKL'.
      s_fcat-ref_field = 'MATKL'.
      s_fcat-ref_table = 'T_MARA'.
      s_fcat-coltext =   'Material Group'.
      s_fcat-seltext =   'Material Group'.
      APPEND s_fcat TO P_T_FCAT.
      CLEAR s_fcat.
        s_fcat-row_pos = 5.
      s_fcat-col_pos = 5.
      s_fcat-fieldname = 'BISMT'.
      s_fcat-ref_field = 'BISMT'.
      s_fcat-ref_table = 'T_MARA'.
      s_fcat-coltext =   'Old material number'.
      s_fcat-seltext =   'Old material number'.
      APPEND s_fcat TO P_T_FCAT.
      CLEAR s_fcat.
        s_fcat-row_pos = 6.
      s_fcat-col_pos = 6.
      s_fcat-fieldname = 'MEINS'.
      s_fcat-ref_field = 'MEINS'.
      s_fcat-ref_table = 'T_MARA'.
      s_fcat-coltext =   'Base Unit of Measure'.
      s_fcat-seltext =   'Base Unit of Measure'.
      APPEND s_fcat TO P_T_FCAT.
    CLEAR s_fcat.
    s_fcat-fieldname = 'BOX3'.
    s_fcat-coltext =   'Box3'.
    s_fcat-seltext =   'Box3'.
    s_fcat-CHECKBOX = 'X'.
    s_fcat-EDIT = 'X'.
    APPEND s_fcat TO P_T_FCAT.
    ENDFORM.                    " fld_cate                     .

    MOVE 2 TO it_toolbar-butn_type.
    Try changing the 2 (menu) to 0 (button) and see if that helps
    also you need to set the event handler after you create your alv object
    set handler handle_toolbar for [whatever object is called].
    Edited by: Kev Mycock on Jul 24, 2008 7:59 AM

  • Problem with ALV Grid Display screen Back Button

    Dear Friends ,
    I have an ALV Grid Display,Here am facing a problem for my 'Back' button,i haven't defined any PF Status and is using the standard one.But after the Display when i press Back Button a blank Screen is appearing n then again i have to press back button to go to my Selection Screen.
    Please Suggest if i have to take care of something else.
    I want my Selection Screen when i press Back on my Display Screen.
    DATA:  IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
           FIELDCAT TYPE SLIS_FIELDCAT_ALV.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
            EXPORTING
             I_BYPASSING_BUFFER          =
             I_BUFFER_ACTIVE             =
             I_INTERFACE_CHECK           = ' '
                 I_CALLBACK_PROGRAM          = 'ZRMMPD01A'
             I_CALLBACK_PF_STATUS_SET    = ' '
             I_CALLBACK_USER_COMMAND     = ' '
             I_CALLBACK_TOP_OF_PAGE      = ' '
             I_CALLBACK_HTML_TOP_OF_PAGE = ' '
             I_CALLBACK_HTML_END_OF_LIST = ' '
             I_STRUCTURE_NAME            =
             I_BACKGROUND_ID             = ' '
             I_GRID_TITLE                =
             I_GRID_SETTINGS             =
               IS_LAYOUT                     =  I_LAYOUT
               IT_FIELDCAT                 =  IT_FIELDCAT
             IT_EXCLUDING                =
             IT_SPECIAL_GROUPS           =
             IT_SORT                     =
             IT_FILTER                   =
             IS_SEL_HIDE                 =
             I_DEFAULT                   = 'X'
             I_SAVE                      = ' '
             IS_VARIANT                  =
             IT_EVENTS                   =
             IT_EVENT_EXIT               =
             IS_PRINT                    =
             IS_REPREP_ID                =
             I_SCREEN_START_COLUMN       = 0
             I_SCREEN_START_LINE         = 0
             I_SCREEN_END_COLUMN         = 0
             I_SCREEN_END_LINE           = 0
        IMPORTING
             E_EXIT_CAUSED_BY_CALLER     =
             ES_EXIT_CAUSED_BY_USER      =
             TABLES
                  T_OUTTAB                    = IT_FINAL
            EXCEPTIONS
                 PROGRAM_ERROR               = 1
                 OTHERS                      = 2
    Thanks and Regards,
    Ashwini

    Hi Vijay ,
    No i dont have any write statement in my proggram.
    Here it is
    REPORT ZRMMPD01A  NO STANDARD PAGE HEADING.
    TABLES : EQUI,SER03,MKPF,OBJK.
    TYPE-POOLS : SLIS.
    DATA  IT_EQUI LIKE EQUI OCCURS 0 WITH HEADER LINE.
    DATA  IT_OBJK LIKE OBJK OCCURS 0 WITH HEADER LINE..
    DATA  IT_SER03 LIKE SER03 OCCURS 0 WITH HEADER LINE.
    DATA  IT_MKPF LIKE MKPF OCCURS 0 WITH HEADER LINE .
    DATA : BEGIN OF IT_DISPLAY OCCURS 0,
                MATNR LIKE EQUI-MATNR,
                SERNR LIKE EQUI-SERNR,
                BWART LIKE SER03-BWART,
                WERK LIKE SER03-WERK,
                CHARGE LIKE SER03-CHARGE,
                LAGERORT LIKE SER03-LAGERORT,
                MBLNR LIKE SER03-MBLNR,
                MJAHR LIKE SER03-MJAHR,
                ZEILE LIKE SER03-ZEILE,
                BUDAT LIKE MKPF-BUDAT,
                BKTXT LIKE MKPF-BKTXT,
                USNAM LIKE MKPF-USNAM,
                XBLNR LIKE MKPF-XBLNR,
            END OF IT_DISPLAY.
    DATA : WA_DISPLAY LIKE IT_DISPLAY.
    DATA  IT_FINAL LIKE IT_DISPLAY OCCURS 0 WITH HEADER LINE.
    DATA  IT_TEMP LIKE IT_DISPLAY OCCURS 0 WITH HEADER LINE.
    DATA:  IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
           FIELDCAT TYPE SLIS_FIELDCAT_ALV.
    DATA :I_LAYOUT TYPE SLIS_LAYOUT_ALV,
          I_EVENTS TYPE SLIS_T_EVENT.
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
    SELECT-OPTIONS : S_MATNR FOR EQUI-MATNR MATCHCODE OBJECT MCD,"OBLIGATORY
                    S_SERNR FOR EQUI-SERNR, "MATCHCODE OBJECT MCD OBLIGATORY
                    S_MBLNR FOR SER03-MBLNR MATCHCODE OBJECT MCD,
                    S_BWART FOR SER03-BWART MATCHCODE OBJECT MCD,
                    S_WERK FOR SER03-WERK MATCHCODE OBJECT MCD,
                    S_LAGET FOR SER03-LAGERORT MATCHCODE OBJECT MCD,
                    S_BUDAT FOR MKPF-BUDAT MATCHCODE OBJECT MCD,
                    S_XBLNR FOR MKPF-XBLNR MATCHCODE OBJECT MCD.
    SELECTION-SCREEN END OF BLOCK B1.
    SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
    PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X',
                 R2 RADIOBUTTON GROUP G1.
    SELECTION-SCREEN END OF BLOCK B2.
    START-OF-SELECTION.
    *Fetch Data.
      PERFORM GET_DATA.
    *Fill Display Fields.
      PERFORM FILL_TABLE.
    *Segregate data according to radio button selection.
      PERFORM SELECT_CONDITION.
    *Fill The Feild catalog.
      PERFORM FIELD_CATALOG.
    *Display Output.
      PERFORM OUTPUT_DISPLAY..
    *&      Form  GET_DATA
          text
    -->  p1        text
    <--  p2        text
    FORM GET_DATA.
      SELECT * FROM EQUI INTO TABLE IT_EQUI
        WHERE MATNR IN S_MATNR
        AND SERNR IN S_SERNR.
      SELECT * FROM OBJK INTO TABLE IT_OBJK
      FOR ALL ENTRIES IN IT_EQUI
      WHERE EQUNR = IT_EQUI-EQUNR.
      SELECT * FROM SER03 INTO TABLE IT_SER03
      FOR ALL ENTRIES IN IT_OBJK
      WHERE OBKNR = IT_OBJK-OBKNR
      AND MBLNR IN S_MBLNR
      AND BWART IN S_BWART
      AND WERK IN S_WERK
      AND LAGERORT IN S_LAGET.
      SELECT * FROM MKPF INTO TABLE IT_MKPF
      FOR ALL ENTRIES IN IT_SER03
      WHERE MBLNR = IT_SER03-MBLNR
      AND BUDAT IN S_BUDAT
      AND XBLNR IN S_XBLNR.
    ENDFORM.                    " GET_DATA
    *&      Form  FILL_TABLE
          text
    -->  p1        text
    <--  p2        text
    FORM FILL_TABLE.
      LOOP AT IT_EQUI.
        LOOP AT IT_OBJK.
          IF IT_OBJK-EQUNR <> IT_EQUI-EQUNR.
            SKIP.
          ELSE.
            READ TABLE IT_SER03 WITH KEY OBKNR = IT_OBJK-OBKNR.
            IF SY-SUBRC = 0.
              WA_DISPLAY-MATNR = IT_EQUI-MATNR.
              WA_DISPLAY-SERNR = IT_EQUI-SERNR.
              WA_DISPLAY-BWART = IT_SER03-BWART.
              WA_DISPLAY-WERK = IT_SER03-WERK.
              WA_DISPLAY-CHARGE = IT_SER03-CHARGE.
              WA_DISPLAY-LAGERORT = IT_SER03-LAGERORT.
              WA_DISPLAY-MBLNR = IT_SER03-MBLNR.
              WA_DISPLAY-MJAHR = IT_SER03-MJAHR.
              WA_DISPLAY-ZEILE = IT_SER03-ZEILE.
             READ TABLE IT_MKPF WITH KEY MBLNR = IT_SER03-MBLNR.
              IF SY-SUBRC = 0.
                WA_DISPLAY-BUDAT = IT_MKPF-BUDAT.
                WA_DISPLAY-BKTXT = IT_MKPF-BKTXT.
                WA_DISPLAY-USNAM = IT_MKPF-USNAM.
                WA_DISPLAY-XBLNR = IT_MKPF-XBLNR.
              ENDIF.
            ENDIF.
          ENDIF.
          IF NOT WA_DISPLAY IS INITIAL.
            APPEND WA_DISPLAY TO IT_DISPLAY.
            CLEAR WA_DISPLAY.
          ENDIF.
        ENDLOOP.
      ENDLOOP.
    ENDFORM.                    " FILL_TABLE
    *&      Form  FIELD_CATALOG
          text
    -->  p1        text
    <--  p2        text
    FORM FIELD_CATALOG.
      FIELDCAT-TABNAME = 'IT_DISPLAY'.
      FIELDCAT-FIELDNAME = 'MATNR'.
      FIELDCAT-SELTEXT_M = 'Material Number'.
      FIELDCAT-OUTPUTLEN =  18.
      APPEND FIELDCAT TO IT_FIELDCAT.
      CLEAR FIELDCAT.
      FIELDCAT-TABNAME = 'IT_DISPLAY'.
      FIELDCAT-FIELDNAME = 'SERNR'.
      FIELDCAT-SELTEXT_M = 'Serial number'.
      FIELDCAT-OUTPUTLEN =  18.
      APPEND FIELDCAT TO IT_FIELDCAT.
      CLEAR FIELDCAT.
      FIELDCAT-TABNAME = 'IT_DISPLAY'.
      FIELDCAT-FIELDNAME = 'MBLNR'.
      FIELDCAT-SELTEXT_L = 'Number of material document'.
      FIELDCAT-OUTPUTLEN =  18.
      APPEND FIELDCAT TO IT_FIELDCAT.
      CLEAR FIELDCAT.
      FIELDCAT-TABNAME = 'IT_DISPLAY'.
      FIELDCAT-FIELDNAME = 'BWART'.
      FIELDCAT-SELTEXT_M = 'Movement type'.
      FIELDCAT-OUTPUTLEN =  18.
      APPEND FIELDCAT TO IT_FIELDCAT.
      CLEAR FIELDCAT.
      FIELDCAT-TABNAME = 'IT_DISPLAY'.
      FIELDCAT-FIELDNAME = 'WERK'.
      FIELDCAT-SELTEXT_M = 'Plant'.
      FIELDCAT-OUTPUTLEN =  5.
      APPEND FIELDCAT TO IT_FIELDCAT.
      CLEAR FIELDCAT.
      FIELDCAT-TABNAME = 'IT_DISPLAY'.
      FIELDCAT-FIELDNAME = 'CHARGE'.
      FIELDCAT-SELTEXT_M = 'Batch number'.
      FIELDCAT-OUTPUTLEN =  18.
      APPEND FIELDCAT TO IT_FIELDCAT.
      CLEAR FIELDCAT.
      FIELDCAT-TABNAME = 'IT_DISPLAY'.
      FIELDCAT-FIELDNAME = 'LAGERORT'.
      FIELDCAT-SELTEXT_M = 'Storage Location'.
      FIELDCAT-OUTPUTLEN =  18.
      APPEND FIELDCAT TO IT_FIELDCAT.
      CLEAR FIELDCAT.
      FIELDCAT-TABNAME = 'IT_DISPLAY'.
      FIELDCAT-FIELDNAME = 'MJAHR'.
      FIELDCAT-SELTEXT_M = 'Material doc. year'.
      FIELDCAT-OUTPUTLEN =  18.
      APPEND FIELDCAT TO IT_FIELDCAT.
      CLEAR FIELDCAT.
      FIELDCAT-TABNAME = 'IT_DISPLAY'.
      FIELDCAT-FIELDNAME = 'ZEILE'.
      FIELDCAT-SELTEXT_L = 'Item in material document'.
      FIELDCAT-OUTPUTLEN =  18.
      APPEND FIELDCAT TO IT_FIELDCAT.
      CLEAR FIELDCAT.
      FIELDCAT-TABNAME = 'IT_DISPLAY'.
      FIELDCAT-FIELDNAME = 'BUDAT'.
      FIELDCAT-SELTEXT_L = 'Posting date in the document'.
      FIELDCAT-OUTPUTLEN =  10.
      APPEND FIELDCAT TO IT_FIELDCAT.
      CLEAR FIELDCAT.
      FIELDCAT-TABNAME = 'IT_DISPLAY'.
      FIELDCAT-FIELDNAME = 'BKTXT'.
      FIELDCAT-SELTEXT_L = 'Document header text'.
      FIELDCAT-OUTPUTLEN =  25.
      APPEND FIELDCAT TO IT_FIELDCAT.
      CLEAR FIELDCAT.
      FIELDCAT-TABNAME = 'IT_DISPLAY'.
      FIELDCAT-FIELDNAME = 'USNAM'.
      FIELDCAT-SELTEXT_M = 'User name'.
      FIELDCAT-OUTPUTLEN =  15.
      APPEND FIELDCAT TO IT_FIELDCAT.
      CLEAR FIELDCAT.
      FIELDCAT-TABNAME = 'IT_DISPLAY'.
      FIELDCAT-FIELDNAME = 'XBLNR'.
      FIELDCAT-SELTEXT_L = 'Reference document number'.
      FIELDCAT-OUTPUTLEN =  25.
      APPEND FIELDCAT TO IT_FIELDCAT.
      CLEAR FIELDCAT.
    ENDFORM.                    " FIELD_CATALOG
    *&      Form  DISPLAY_OUTPUT
          text
    -->  p1        text
    <--  p2        text
    FORM OUTPUT_DISPLAY.
      IF R1 = 'X'.
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
          EXPORTING
              I_CALLBACK_PROGRAM          = 'ZRMMPD01A'
              IS_LAYOUT                   =  I_LAYOUT
              IT_FIELDCAT                 = IT_FIELDCAT
          TABLES
              T_OUTTAB                    = IT_DISPLAY
            EXCEPTIONS
                 PROGRAM_ERROR               = 1
                 OTHERS                      = 2
        IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
        REFRESH IT_DISPLAY.
        CLEAR IT_DISPLAY.
      ELSEIF R2 = 'X'.
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
            EXPORTING
                 I_CALLBACK_PROGRAM          = 'ZRMMPD01A'
                 IS_LAYOUT                     =  I_LAYOUT
                 IT_FIELDCAT                 =  IT_FIELDCAT
             TABLES
                  T_OUTTAB                    = IT_FINAL
            EXCEPTIONS
                 PROGRAM_ERROR               = 1
                 OTHERS                      = 2
        IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
        REFRESH IT_DISPLAY.
        CLEAR IT_DISPLAY.
      ENDIF.
    ENDFORM.                    " DISPLAY_OUTPUT
    *&      Form  SELECT_CONDITION
          text
    -->  p1        text
    <--  p2        text
    FORM SELECT_CONDITION.
      IF R2 = 'X'.
        CLEAR WA_DISPLAY.
        SORT IT_DISPLAY BY MATNR SERNR MBLNR ZEILE.
        DELETE ADJACENT DUPLICATES FROM IT_DISPLAY.
        LOOP AT IT_DISPLAY WHERE ZEILE = '0002'.
          READ TABLE IT_DISPLAY WITH KEY MATNR = IT_DISPLAY-MATNR
          SERNR = IT_DISPLAY-SERNR ZEILE = '0001'.
          IF SY-SUBRC = 0.
            DELETE IT_DISPLAY.
          ENDIF.
        ENDLOOP.
        SORT IT_DISPLAY BY MATNR SERNR BWART MBLNR.
        DELETE ADJACENT DUPLICATES FROM IT_DISPLAY.
        LOOP AT IT_DISPLAY.
          IF WA_DISPLAY IS INITIAL.
            WA_DISPLAY =  IT_DISPLAY.
          ENDIF.
          LOOP AT IT_DISPLAY WHERE MATNR = WA_DISPLAY-MATNR
          AND SERNR = WA_DISPLAY-SERNR.
            IF IT_DISPLAY-BUDAT > WA_DISPLAY-BUDAT.
              WA_DISPLAY = IT_DISPLAY.
            ELSE.
              DELETE IT_DISPLAY.
            ENDIF.
          ENDLOOP.
          APPEND WA_DISPLAY TO IT_TEMP.
          CLEAR WA_DISPLAY.
        ENDLOOP.
        DELETE ADJACENT DUPLICATES FROM IT_TEMP.
        IF NOT IT_TEMP[] IS INITIAL.
          IT_FINAL[] = IT_TEMP[].
        ENDIF.
      ENDIF.
    ENDFORM.                    " SELECT_CONDITION
    Regards,
    Ashwini

  • Sub columns in alv grid display

    hi everyone,
        can anyone tell me the way in which we can include sub-column headings in alv grid display. i.e., for example as shown below.
        column1             column2              column3 
    scol1   scol2         scol3   scol4        scol5   scol6........................
    thanks in advance. Here we are generating the column headings by using fm field catalog merge.
    regards,
    rajsekhar.k

    check this thread, check the sample code in my post
    Re: multiple headers in ALV.

  • Use of I_CALLBACK_USER_COMMAND in ALV grid display

    Hi experts,
    When i am using the parameter I_CALLBACK_USER_COMMAND in grid display and when i click on BACK button, then the Function code for BACK button is not captured i.e. it does not go in the routine which i have written. But this is not the case with SAVE button. When i click on save button, then it goes in the routine ( i have put a breakpoint in the routine) and also the value of Function code for SAVE button is fetched. Then why is it not working for BACK or CANCEL button??
    Thanks in advance

    Actually my requirement is as follows.
    I have develpoed a screen program in which i have a created a button & on the click of this button i call the reuse alv grid display FM  which displays in the alv grid format. For this I have used an internal table whose first field is checkbox.( While creating the field catalog itab to be passed to reuse alv grid display i mark the checkbox field as 'X' for the first field.) Now when i display the alv, i need to select certain records. For this i tick mark the necessary records. But then when i click on the back button and come to the previous screen, i am not able to capture these selected records. How do i proceed

  • End of page in ALV display using OOPS

    Hi all,
       How can i display end of page or footer in ALV display using OOPS concept.
    Thanks,
    vinit

    Hi ,
    Try using this code.
    First add a handler method in your handler class definition as:
    e.g. METHOD handle__end_of_page
    FOR EVENT print_end_of_page OF cl_gui_alv_grid .
    Then implement the method in the implementation part of your local class.
    e.g. METHOD handle_print_end_of_page .
    WRITE:/ 'Flights Made on ', sy-datum .
    ENDMETHOD .
    And register this method as the handler.
    SET HANDLER gr_event_handler->handle_print_end_of_page FOR gr_alvgrid .
    Hope this helps.
    Regards,
    Janaki.

  • Regarding output using alv grid display

    Hi experts,
        i have a program
    FS_TAB1-A = P_T1.
    IF P_T1 = 0.
      TEMP1 = 1.
      DO TEMP1 TIMES.
        FS_TAB1-A = P_T1 * DUMMY1.
        APPEND FS_TAB1 TO T_TAB1.
        DUMMY1 = DUMMY1  + 1.
      ENDDO.
    now i have to diplay the p_t1*dummy1 using alv grid display like it goes into thew  loop for ten times then i have to show it 10 times like
    10 1  102 103 104 111 112  like that can u help me

    hi,
        you have to get the result of the multiplication at each row and then concatenate the result and the factor to show the final result in multiples value and multiplication factor...

Maybe you are looking for