An Inquiry Document is to be created in ECC from CRM system

Hi Friends,
An Inquiry Document is to be created in ECC when an project opportunity is created and the phase of the opportunity is “Quotation Stage” in CRM system using Tcode CRMD_ORDER.
So the scenario is when i create project opportunity and save it in the CRM,while saving at the same time i need to create Inquiry document in ECC system using BAPI "BAPI_INQUIRY_CREATEFROMDATA".
So can any one suggest me where should i need to call the BAPI , what parameters i need to pass ,
It would be helpful for me if any one help me out.
Regards
Raghavendra Prasad
Message was edited by:
        Raghavendra Prasad

I actually followed your blog and developed a sample application
How to create SAPUI5 application consuming Gateway service with the help of SAP NW Gateway Plug-in for Eclipse
Can you please explain below :
1) I was getting an UI like this ,  but in example you provide you achieved a table like UI. May i know the reason behind this?
How can i achieve the UI as in blog?
my result
example in blog result
2) The result i achieved is not responsive. When i change the size of my browser the UI design does nt adjust itself.
How to make this responsive?

Similar Messages

  • Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

    Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in Oracle and  yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

    Thanks for your advise.
    However, I missed to mention that we have two set of users  One is for Finished Goods and another for Spares.
    Only Spares users need to be prevented from creating Direct/Manual Sales Orders in Oracle.
    As you suggested, if this will be done at Form level, that may Disallow FG users also to create Manula Sales Orders which should not be the case.
    Further, I tried to test one scenario through Processing Constraints but it did not work.
    Application
    OM
    Validation Type
    Entity
    Temp
    Short Name
    TBL
    Validation Semantics
    Created By
    Equal To
    User(Myself)
    Processing Cosntraint
    Application
    OM
    Entity
    Order Header
    Constraint
    Operation
    User Action
    Create
    Not Allowed
    Conditions
    Group
    Scope
    Validation Entity
    Record Set
    Validation Template
    101
    Any
    Order Header
    Order
    Above Created
    Please advise.

  • Not able to create a message from satellite system

    Hello Everyone.
    We have been working on Solution Manager .We have managed with successfull installation,Uploaded required support packages,configured the system according to SAP Solution Manager Guide.
    Faced with some problem regarding support desk,we are not able to create a message from satellite system to Solution Manager.
    Note : Error Message related to this problem is ....
    <b>"Error in Local Message System : External number assignment, Enter notification num message was not Created."</b>
    Thanks in advance.
    Regards,
    Nimesh V . Master

    Hi, you need to check the number ranges for the notifications and make sure they are correct.  Look in the IMG of the SAP Solution Manager system for the instructions.  You also need to make sure that the Service Desk BC Sets are activated if you are NOT on 4.0 and SP Stack 09+.  In the later SPs much of this configuration from the IMG is automated in the wizard.

  • Roles required to create support message from satellite system

    Hi Team,
    I am trying to create support message from satellite system. i have assigned S_RFC and S_RFCACL to the Zrole. Apart from that, is there any other roles to be assined in satelite system to create support message?
    Regards
    Kumar

    I think that's it.
    Of course they roles in the central system too: SAP_SV_FDB_NOTIF_BC_ADMIN and SAP_SUPPDESK_CREATE (or copies thereof).
    Regards,
    Sean

  • Creating Support Messages from Satellite System without SolMan user account

    Hi
    We are having some problems with users "creating support message" from our ECC system  to SolMan, if the user does not have a user account in Solution Manager.
    It is not correct, that users from Satellite systems can create support messages from these systems, without the user having an account in Solution Manager? And that the user is identified by the business partner for the user, that must exist in the Solution Manager system ?
    We have set up the RFC for the supportmessages between SolMan and the ECC system as trusted RFC, with the "Current user" as the user, but how should this be set up, if the user does not have an account in the Solution Manager system. If we enter a user with the right authorizations in the RFC, will the messages that come through not just appear as created by that user, instead of the ECC user and corresponding business partner ?
    Regards
    Lars

    Hi,
    you can use the use the user for the RFC-Connection in that case. I have customizied a similar scenario. In my scenario the System from which the message was created, is the business partner (SOLD-TO-PARTY). For that you have to create a communication user (i.e SOLMAN<SYSID>). In TA SM59 in the satellite-system you assign this user for the connection. (Don't forget to assign the user to the role "SAP_SV_FDB_NOTIF_BC_ADMIN"). Now, it schould be possible to create messages from the satellite system to the solution manager. Additionally you should create business-partner for each user of the satellite system, by using TA DSWP>EDIT>CREATE BUSINESS PARTNER.
    With this TA, it is easy to create BP for each satellite system.
    Best regards
    Marc

  • I have created a quotation in CRM system. I want that to be downloaded into ECC, so that, I can create a sales order there with reference to that quotation. So, what are the parameters that I need to set in CRM system so that my quotation gets replicated?

    Dear Experts,
    I have created a quotation in CRM system. I want that to be downloaded into ECC, so that, I can create a sales order there with reference to that quotation. What are the parameters that I need to set in CRM system so that my quotation gets replicated without any error?
    Please help me in this regard. An early and in detail step by step guidance is highly appreciated.
    Thanks,
    SMTP

    It may be best to recreate the folder and the smart playlists from scratch.
    tt2

  • Documents download from CRM systems

    Hello friends,
    In our prj requirement, we have to download data from CRM systems.
    where even we have to download documents for each item level.
    we identified some tables which stores those attachments.
    but my doubt is how to put these attachments in BW system at item level.
    i am lost here kindly give me some inputs.
    Rgds,
    Ala.

    HI Nishadam ,
    I too have a similar requirement now ,
    did u get any solution for this document download from CRM system , please help me in this regards and its really urgent for me .
    Rgds
    Anil

  • Error while creating ERP Quotation from CRM Opportunity in CRM WebUI

    Dear all,
    We have implemented Best Practise Scenarios but have a problem in the following: C63-Opportunity Management-Creating ERP quotation from opportunity
    I have maintained all necessary customising mentioned in Best practises documnet and could select a quotation(AG) as follow on transaction from Opportunity, but get an error message " Material 23 is not defined for sales org.1000, distr.chan.10, language ENu201D in the ERP quotation screen even though material 23 is created in ERP for Sales Org 1000 & DC 10. I have downloaded the material from ECC and it is available in CRM also.
    The weird thing , when the error message pops up in the ERP quotation screen if I delete the material and enter the same material, I get no error.
    If I have 3 materials in opportunity then the error message is there for all the 3 materials when I create an ERP Quotation & after deleting all the 3 & reentering I get no error and am able to save ERP order.
    We have CRM 2007 connected to ECC 6.0
    Please help resolve the above error.
    Thanks
    Teyna

    hi,
    have you created org from middleware thorugh r/3. Is your hierarchy and category same as that mentioned in best practice documents?
    Regards
    Pankaj kumar

  • Error in ERP system  while copying the document from CRM system

    Hi Friends,
    I have created a CRM sales order in CRM Web Ui or Gui. I am getting this Errors.
    Diagnosis
    Errors occurred while transferring the document into another system. To view the error messages, see the enclosed log.
    Transmission log
    u2022     Product  cannot be recoded for ERP System  (Notification E CRM_ORDER_MISC 015)
    u2022     Product  cannot be recoded for ERP System (Notification E CRM_ORDER_MISC 015)
    u2022     No customer is assigned to business partner 417283 (Notification E CRM_BUPA_MAPPING 002)
    Please give suggestions what can i do for this.Please specify clearly the required steps to debug this error
    also
    with respect to first error ,I tried to replicates the product from crm to ERP system in COMMPR01(Send to ERP Option), but it has given this error.
    "input data for industrial material is not fully"
    regards,
    sunil

    Hi Sunil,
    You are getting error in the Sales Order is because of Master Data.
    Sales Documents will flow from CRM to R/3 when master data is consistent in R/3 & CRM side.
    Please maintain the master data in R/3 side & download into CRM Side.
    For Customer use adpater object CUSTOMER_MAIN & for Material object is "Material"
    Use following link for downloading  Customer Master & Material master.
    http://help.sap.com/saphelp_crm20c/helpdata/en/4D/CFF837A9AAE651E10000009B38F8CF/frameset.htm
    http://help.sap.com/saphelp_crm20c/helpdata/en/67/bdcbe77d9611d396bd00a0c930e0da/content.htm
    Best Regards,
    Rajendra

  • Ibase/Component issue while creating a message from satillite system

    Hi experts,
    we have implemented the service desk functionality in solution manager system.
    User is able to create message in solution manager directly.
    While creating message from a satellite system IBASE/component fields are filled with incorrect values.
    Because of this user unable to create message from satillite system.
    Has someone any ideas where we do some settings to get correct Ibase/Component values while creating message from satillite system?
    Thank you in advance,
    Babu

    Hi  Babu,
    For Creating messages in SOLMAN make sure that in T code SM30  under the table BCOS_CUST data is maitained
    OSS_MSG     W     NONE     CUST620     1.0
    First your should make your solman ready for posting issues within.
    Then connect it to ECC systems and try posting issues there.
    Do not user Tcode NOTIF_CREATE for posting issues  always use HELP- Create Support message.
    Thanks
    Nand

  • Attachment not getting created in PI from CRM

    Hi Everyone,
    I am trying to create attachments in PI from CRM but it is not getting created there. I am executing the following steps:
    By default I am getting the attachment data in Binary format so I am using this function module to convert it into XSTRING format.
              CALL FUNCTION 'SCMS_BINARY_TO_XSTRING'
                              EXPORTING
                         input_length = lv_input_length
                         first_line   = lv_first_line
                         last_line    = lv_last_line
                       IMPORTING
                         buffer       = lv_xbuffer
                       TABLES
                         binary_tab   = file_content_binary.
       2. Then I am getting the server context and the protocol.
                           obj_server_context = cl_proxy_access=>get_server_context( ).
                           obj_attch_protocol ?= obj_server_context->get_protocol( if_wsprotocol=>attachments ).
    * Assign File naame to STRING Variable
                           lv_name =  lv_filename.
    * Attach file to the service response.
                           obj_attachment = obj_attch_protocol->get_attachment_from_binary(
                                      data = lv_xbuffer
                                      type = if_ai_attachment=>c_mimetype_pdf
                                      name = lv_name ).
                           APPEND obj_attachment TO t_prx_attach.
                           obj_attch_protocol->set_attachments( t_prx_attach ).
       3. Then I am using a proxy class which has Input and Output structures for sending data to PI and getting the response respectively. And then in the end I am calling the proxy and passing the structures.
         With this I am unable to see the attachmenmts in sxmb_moni transaction. Please help.

    Hi Gurus,
    Can you please help with some pointers on this.
    I have used below links as reference for coding.
    Link 1 :
    http://help.sap.com/saphelp_nw04/helpdata/en/a7/3b2a2d45a34a23b75e3b18745c63bc/content.htm
    Link 2:
    http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/10/19/abap-proxy-protocols-use-cases-and-examples
    After setting attachment(Method SET_ATTACHMENTS) i am not getting any exceptions,but still i am not able to see any attachment created in SXMB_MONI.
    Thanks in Advance,
    Manil.

  • How to call BRF Plus created in ECC from SAP PO 7.4 mapping

    Dear All,
    I'm working on a scenario where we are using BRF+ created in SAP ECC.
    Since the business rules change frequently,we decided to used BRF+ instead of NWBRM where user/functional consultant can maintain rules easily.
    The application is already created in ECC based on business requirement now I have to used this rules in interface to transfer data based on rules.
    How can I call BRF+ rules through message mapping?
    Can we used rfc lookup or soap lookup like we do in NWBPM in SAP PO 7.4.
    Regards
    Niraj

    No, it is not an authorization issue.
    As this interface has been generated in 4.7 using transaction BDBG, I am not able to change it in ECC 6.0.

  • Best Practices for creating reports/Dashboards from BW systems

    HI Gurus,
    Best  Practices of creating BO Dashboards / Xcelsisus from BW systems
    Prasad

    You can use the BICS connector that leverages BW queries directly.  It is listed in the Connection Manager as "SAP NetWeaver BW Connection".  You will need both the ABAP and Java stack and SSO configured between the two.  You will also need to have SAP GUI and BEx installed on the machine you are doing development on.  Note that dashboards using this connection can only be hosted in NW Portal for the time being until the next release of BI 4.x platform.
    Here are some links on getting started with the BICS connector:
    [Building Fast and Efficient Dashboards with BW and Xcelsius|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d0ab8cce-1851-2d10-d5be-b5147a651c58]
    [Requirements for BICS|http://wiki.sdn.sap.com/wiki/display/BOBJ/prerequisitestoXcelsiusandSAPNetWeaverBW+Connection]

  • Unable to follow link to document in ECC from CRM

    Hi,
    Im new to CRM.  Our user have an error when they try to view replicated documents from CRM.  They receive this error:
    "BUS1302 with Key 0050018202 is Not Available in System PRD 100 ECC Production"
    thanks,
    kbas

    .

  • Document number range not creating in Ecc 6.0

    Hi
    I have tried creating document number range in 6.0, but the change interval buttion is in display mode and not in the change mode, so not able to cretae number range. Any input.
    Urgent please help.

    Hi Sidhu,
    It could be the limit of the authorization.
    So try to check whether you have an authorizatin to change the interval or not.
    Hope it helps.

Maybe you are looking for