Analyzing data for max peak time differences after sampling

In the VI attached, each channel is measuring a certain moment of
acceleration, which will be displayed as a global max on the graph.
Ideally what I would like to happen is for
both arrays to be searched for their highest peak (global max) and for
the time difference between these two peaks to be shown on the display
after the program has ended. However, what I have right now is a
sort-of real time measurement. Any suggestions on going about doing this?
Thanks,
John
Solved!
Go to Solution.
Attachments:
TimePeakTest-cp-2.vi ‏74 KB

Thanks for your help Stephen!
I've made those changes, but after the highest peak from each channel occurs, the time difference indicator shows the time diff. between the two peaks only for a split second, and then the indicator returns back to zero. I would like for this max peak-max peak time difference to somehow remain on the indicator after the program has stopped running, because its value, whether it is below or above a certain constant, will need to indicate a true/false statement.
Any help is greatly appreciated.
Thanks,
John
Attachments:
TimePeakTest-cp-2.vi ‏74 KB

Similar Messages

Help: I want to auto schedule a load using file watcher but it runs only once for the first time and after that it is not running at all

Hi All,
I am trying to execute the below code as provided from one of the blogs. i am able to run the job only once based on a file watcher object(i.e. for very first time) and after that the job is not running at all and if i schedule the job to run automatically based on interval of 10 or more minutes it is executing properly). Please let me know or guide me if i have missed any step or configuration.that is needed.
Version of Oracle 11.2.0.1.0
OS : Windows 7 Prof
Given all the necessary privileges
BEGIN
DBMS_SCHEDULER.CREATE_CREDENTIAL(
     credential_name => 'cred',
     username        => 'XXXX',
     password        => 'XXXX');
END;
CREATE TABLE ZZZZ (WHEN timestamp, file_name varchar2(100),
   file_size number, processed char(1));
CREATE OR REPLACE PROCEDURE YYYY
(payload IN sys.scheduler_filewatcher_result) AS
BEGIN
INSERT INTO ZZZZ VALUES
     (payload.file_timestamp,
      payload.directory_path || '/' || payload.actual_file_name,
      payload.file_size,
      'N');
END;
BEGIN
DBMS_SCHEDULER.CREATE_PROGRAM(
    program_name        => 'prog1',
    program_type        => 'stored_procedure',
    program_action      => 'YYYY',
    number_of_arguments => 1,
    enabled             => FALSE);
DBMS_SCHEDULER.DEFINE_METADATA_ARGUMENT(
    program_name        => 'prog1',
    metadata_attribute => 'event_message',
    argument_position   => 1);
DBMS_SCHEDULER.ENABLE('prog1');
END;
BEGIN
DBMS_SCHEDULER.CREATE_FILE_WATCHER(
    file_watcher_name => 'file_watcher1',
    directory_path    => 'D:\AAAA',
    file_name         => '*.txt',
    credential_name   => 'cred',
    destination       => NULL,
    enabled           => FALSE);
END;
BEGIN
DBMS_SCHEDULER.CREATE_JOB(
    job_name        => 'job1',
    program_name    => 'prog1',
    queue_spec      => 'file_watcher1',
    auto_drop       => FALSE,
    enabled         => FALSE);
DBMS_SCHEDULER.SET_ATTRIBUTE('job1','PARALLEL_INSTANCES',TRUE);
END;
EXEC DBMS_SCHEDULER.ENABLE('file_watcher1,job1');
Regards,
kumar.

Please post a copy and paste of a complete run of a test case, similar to what I have shown below.
SCOTT@orcl12c> SELECT banner FROM v$version
2 /
BANNER
Oracle Database 12c Enterprise Edition Release 12.1.0.1.0 - 64bit Production
PL/SQL Release 12.1.0.1.0 - Production
CORE    12.1.0.1.0    Production
TNS for 64-bit Windows: Version 12.1.0.1.0 - Production
NLSRTL Version 12.1.0.1.0 - Production
5 rows selected.
SCOTT@orcl12c> CONN / AS SYSDBA
Connected.
SYS@orcl12c> -- set file watcher interval to one minute:
SYS@orcl12c> BEGIN
2    DBMS_SCHEDULER.SET_ATTRIBUTE
3       ('file_watcher_schedule',
4        'repeat_interval',
5        'freq=minutely; interval=1');
6 END;
7 /
PL/SQL procedure successfully completed.
SYS@orcl12c> CONNECT scott/tiger
Connected.
SCOTT@orcl12c> BEGIN
2    -- create credential using operating system user and password (fill in your own):
3    DBMS_SCHEDULER.CREATE_CREDENTIAL
4       (credential_name     => 'cred',
5        username          => '...',
6        password          => '...');
7 END;
8 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- create table to insert results into:
SCOTT@orcl12c> CREATE TABLE ZZZZ
2    (WHEN      timestamp,
3      file_name varchar2(100),
4      file_size number,
5      processed char(1))
6 /
Table created.
SCOTT@orcl12c> -- create procedure to insert results:
SCOTT@orcl12c> CREATE OR REPLACE PROCEDURE YYYY
2    (payload IN sys.scheduler_filewatcher_result)
3 AS
4 BEGIN
5    INSERT INTO ZZZZ VALUES
6        (payload.file_timestamp,
7         payload.directory_path || '/' || payload.actual_file_name,
8         payload.file_size,
9         'N');
10 END;
11 /
Procedure created.
SCOTT@orcl12c> -- create program, define metadata, and enable:
SCOTT@orcl12c> BEGIN
2    DBMS_SCHEDULER.CREATE_PROGRAM
3       (program_name          => 'prog1',
4        program_type          => 'stored_procedure',
5        program_action      => 'YYYY',
6        number_of_arguments => 1,
7        enabled          => FALSE);
8    DBMS_SCHEDULER.DEFINE_METADATA_ARGUMENT(
9       program_name         => 'prog1',
10       metadata_attribute => 'event_message',
11       argument_position   => 1);
12    DBMS_SCHEDULER.ENABLE ('prog1');
13 END;
14 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> BEGIN
2    -- create file watcher:
3    DBMS_SCHEDULER.CREATE_FILE_WATCHER
4       (file_watcher_name   => 'file_watcher1',
5        directory_path      => 'c:\my_oracle_files',
6        file_name          => 'f*.txt',
7        credential_name     => 'cred',
8        destination          => NULL,
9        enabled          => FALSE);
10 END;
11 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> BEGIN
2    -- create job:
3    DBMS_SCHEDULER.CREATE_JOB
4       (job_name          => 'job1',
5        program_name          => 'prog1',
6        queue_spec          => 'file_watcher1',
7        auto_drop          => FALSE,
8        enabled          => FALSE);
9    -- set attributes:
10    DBMS_SCHEDULER.SET_ATTRIBUTE ('job1', 'PARALLEL_INSTANCES', TRUE);
11 END;
12 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- enable:
SCOTT@orcl12c> EXEC DBMS_SCHEDULER.enable ('file_watcher1, job1');
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- write file (file must not exist previously):
SCOTT@orcl12c> CREATE OR REPLACE DIRECTORY upncommon_dir AS 'c:\my_oracle_files'
2 /
Directory created.
SCOTT@orcl12c> declare
2    filtyp utl_file.file_type;
3 begin
4    filtyp := utl_file.fopen ('UPNCOMMON_DIR', 'file1.txt', 'W', NULL);
5    utl_file.put_line (filtyp, 'File has arrived ' || SYSTIMESTAMP, TRUE);
6    utl_file.fclose (filtyp);
7 end;
8 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- wait long enough (may take more than one minute) for job to run:
SCOTT@orcl12c> EXEC DBMS_LOCK.SLEEP (100)
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- check for results:
SCOTT@orcl12c> SELECT * FROM zzzz
2 /
WHEN
FILE_NAME
FILE_SIZE P
22-OCT-13 10.12.28.309000 PM
c:\my_oracle_files/file1.txt
        57 N
1 row selected.
SCOTT@orcl12c> declare
2    filtyp utl_file.file_type;
3 begin
4    filtyp := utl_file.fopen ('UPNCOMMON_DIR', 'file2.txt', 'W', NULL);
5    utl_file.put_line (filtyp, 'File has arrived ' || SYSTIMESTAMP, TRUE);
6    utl_file.fclose (filtyp);
7 end;
8 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- wait long enough (may take more than one minute) for job to run:
SCOTT@orcl12c> EXEC DBMS_LOCK.SLEEP (100)
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- check for results:
SCOTT@orcl12c> SELECT * FROM zzzz
2 /
WHEN
FILE_NAME
FILE_SIZE P
22-OCT-13 10.12.28.309000 PM
c:\my_oracle_files/file1.txt
        57 N
22-OCT-13 10.14.08.580000 PM
c:\my_oracle_files/file2.txt
        57 N
2 rows selected.

Can we use the AdventureWorks2008R2 data for the real time project.

Hi,
In our project we are trying to do the data scrambling on First name, last name and middle name...
In the regular practice we use to update the names as
First Name = FN+<PERSON_SNO>
Last Name = LN+<PERSON_SNO>
Middle Name = MN+<PERSON_SNO>
The Problem is the names are not looking realistic, so I thought of applying some logic and updating our PERSON table names based on Person.Person table in adventure works.
My question is can we use the AdventureWorks2008R2 data for the real time project. Is there any cop right issue.
Someone please help me solve this issue.
Thanks
Karthikeyan Jothi.

Please read this link content:
Adventure Works Sample Site
sqldevelop.wordpress.com

Date when the cube was filled with data for the last time

Hi!
We are using a SAP BW System and on top of it BOBJ for reporting. Within BEx Web Application Designer, it's very simple to access the data, when the cube was filled with data for the last time. Is it possible to access this information within BOBJ, too?
Thanks for your help!
Greetings
Stefan

Hallo Ingo,
thanks for your answer. That was exactly what we were looking for.
We will have to think about a workaround now.
Greetings
Stefan

Problem while refreshing the data for the second time using excel services in sharepoint 2013...

Hi,
I have migrated my Sharepoint from 2010 to 2013.I am able to get the data at the first time of refresh when I click on refresh for the second time I am getting the empty the sheet.
below find the flow of refresh
First Refresh
On Click of refresh open the workbook with excel services and return the session id.
Using that session I am invoking RefrehAsync method of excel services
After refresh completed I am setting the calculation of workbook as automatic(to calculate the formulas) using the same session id
After setting the calculation as Automatic I am setting the calculation type as full(recalculate) using the same session id.
Now I am able to see the data
Second Refresh
After clicking on refresh instead of opening the workbook I am using the session id(already opened workbook) and setting the calculation type as manual
I am following the same process from refresh(RefreshAsync) as I have followed in first refresh.
This time my formulas are not getting calculated because of that I am not able to see the data.
Could you please let me know that am I missing anything here?
Is this know issue in Sharepoint2013 excel services as same code is working fine with Sharepoint2010.
If I close the workbook(session id null) and opens(new session id) for all the refreshes it is working and I am able to see the data.
Thanks,
Meenakshi Nagpal
N.Meenakshi

I am able to see the data for the second refresh if I change the data source.If I use the same data source which is used in the first refresh I am not getting the data.Excel services will contact the cubes and calculate the formulas in my workbook.
Could you please let me know what could be the problem at second refresh while contacting the same data source with same session id?
Please help me asap.
Thanks,
Meenakshi Nagpal
N.Meenakshi

Make goods receipt for the items w/difference after the proof of delivery

Hello experts,
I do like to know how finish the process of proof of delivery, when I does have items with differences over the quantities that arrived to my client. For example, one sales order for 20 units. I did the delivery note, and posted the goods issue. Then I did the Proof of Delivery, confirming 19 units and the deviation reasons, saving the document. Then I made my billing document for 19 units of material.
The deviation reasons was a damage material, my questions is: How does make goods receipt for the items with difference over the quantities after the confirming of proof of delivery?
Thanks in advance
Edited by: Johnattan Company on Sep 8, 2009 3:45 PM
Edited by: Johnattan Company on Sep 8, 2009 3:59 PM

Hello Chetan,
Thinking in the process, I have found a solution to do it. If the differences was caused by unknowing reasons, like stolen or whatever reasons and the material will not enter again in the warehouse, we donu2019t need to make any process.
But if the causes was a broken material, a lapsed date expired or unknowing others reasons as a consequence the material will enter again in the warehouse; I have customized a returns order, and a returns item with the option not relevant for billing to conclude the process.
Thanks for your help.

Unable to fetch data for the second time in an ADOBE form

Hi All,
I am creating a PDF form and its data is based on the output parameter of an interface, when i drag and drop an object from the data view into the body page twice, only the first time the value is getting printed and from the second time it is not printing any data.
Kindly let me know if any one have solution for the same or if i am not clear any where.
Thanks in advance.
Warm Regards,
Kasi Raaman.R

The pbm is now solved

0HR_PT_2 How to get back historical data for new report time type

Hi All Expert,
We have implemented and using the 0HR_PT_2 extractor for the past whole year. The Delta is working. Recently, there is requirement to read more data from the ZL custer table, and more new BW Report Time Types are added to extract such data.
The delta doesn't pick up the the past whole year data of the new report time type that we added.
Do we need to re-initialize the load to get back those historical data every time when we add a new report time type?
Please advice and Thx
Ken
Edited by: Ken Hong on Feb 27, 2008 9:24 PM
Edited by: Ken Hong on Feb 27, 2008 9:25 PM

P.s, all hidden files are shown in es file explorer as this backup folder was hidden originally. It has a '.' in front. So I'm pretty sure the folder it's gone, but as I've not erased my phone again, shouldn't the folder be somewhere in my SD card still and how can I find it using my Mac?

Dates for payroll and time ( Ponts are sure for every answers )

Hi Peers,
I have a scenario where i have to capture the time related activates from 27 Feb to 27 March and the Payroll dates from 01.03.2007 to 31.03.2007 .
Now my problem is when the employee took leaves on 27 and 28 then according to the above config it should deduct the 2 days salary and paid accordingly.
Pls help how can i configure it .
It is very urgent pls help.
Nancy.

Hi Anu / Peers
Please read all the related queries.
If it is still unclear I will explain again.
I am configuring the Payroll for the dates 01.04.2007 to 31.04.2007
We are using the Negative Time Management.
Now the company wants is to configure the time realted activites from 26.03.2007 to 26.04.2007.
Now if the employee is absent from 27.03.2007 to 28.03.2007 so his time data should capture accordingly in the time proccessing of payroll .
Now what is a problem is it is assuming the values from 27.03.2007 to 28.03.2007 to as it was from last month and deducting in arrears.
Now if i know how and where to configure the time 27.03.2007 to 28.03.2007 then there will be no Problem.
So pls help me regarding this .
It is really urgent .
Hope all understand and pls give inputs.
Nancy.

Every time I download app from AppStore but at the end it couldn't download. Not all time but sometime this problem occurre ! I have to retry the app for 3-4 times and after that it downloaded in iphone

i have a iphone 6 . From the last 2-3 weeks i have seen some proble in my iphone that I Couldn't download any app or update any app in my appstore. Every time it shows at the end that youe app can not download ! But after retry and retry i can download that app.! So can you help me ! is there any problem in my iphone6 ?

You must have a separate Apple ID registered in the other store along with a valid bank-issued charge card in the other country, and a legal billing address in the other country.
Sorry... But... You cannot use other countries itunes stores.
You must be within the Country with a Valid Billing Address and Credit Card for that Country to use the iTunes Store of that Country..
iTunes Store Terms of Service
http://www.apple.com/legal/itunes/us/terms.html#SERVICE

"Application opened for the first time" warning after every reboot

Hello, I have a problem with Lion 10.7.5. The system does not remember that I already opened applications before. After every reboot, every time I open an application it displays the warning as if it's the first time I'm opening it. Anyone knows how to solve this problem?
Thanks in advance for your help.

In my case, the problem disappeared after I installed the 10.7.5 supplemental update.

System does not reset asset retirement date for Depreciation Area specific transaction after area has been deleted

Good day,
I needed to create a new depreciation area in a live system. The depreciation area would not post to the GL, but would be used for tax purposes in a currency other than the local currency. When creating this area the asset values were translated at the system exchange rate which did not agree with the values of the manually maintained tax register. I proceeded by creating new transaction types that would only post to the new area, one of which was an asset disposal transaction, which would be used for downward adjustment of the APC value. I made my adjustments at the end of the previous financial year, but had to start over and proceeded to delete the depreciation area to allow me to start over.
After reinstating the depreciation area, my original adjustments were removed, however the assets which APC values needed to be adjusted downward using the disposal transaction, was giving me the AA 478 Posting transaction is not possible (value date not allowed) error.
I've reviewed the asset postings and there is no record of my original adjustment documents. The problem seems to be that field ANLA-ABGDT (Last Retirement Date), is still indicating the date of my previous adjustments and that this was not updated when the Depreciation Area was deleted and reinstated.
Again, I do not have any documents which I can access or reverse to update this table. Is there any way to clear this field without reversing the disposal document?
I'm also looking at implementing SAP note 1618286, to make error message AA478 a warning. I could not implement SAP note 533378 since it only supports component version 46c and we are currently running component verson 605.
I would appreciate your consideration of my problem.
Regards
Marius

If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
Hope this helps.
Thanks!
Jhero

Calendar time difference after synchronize

I have the 6085 and the 7.1 Suite for Vista. When I synchronize my calendar, the time on the phone is 5 hours earlier than on the calendar. Anybody know how to remedy that?

I have read this thread and here is my problem with a 5300
PROBLEM
When meetings/appointments are synchronized from Outlook to the cell phone the time advances [decreased] by one hour.
Thing I have tried
1) Disabling the PC daylight saving auto update. The meetings/appointment moved up by two hours
2) I have not turned off the cell phone auto update option [I would set time rather that the service provider]
Nokia PC Suite Version; 6.8.xx downloaded and installed. May14, 2008
PC Operating System: XP pro
Service Provider: T-Mobil
PC and cell phone show same time. Cell phone time from service provider, currently on daylight saving time.

I would like to use removable hard disk drive (portable hard disk) for iphone because of many data, report and so on. I want to receive data for e-mail, so the iphone holds large amounts of data for a long time, and i want to use its at any time

nowadays, people use removable hard disk drive (portable hard disk) & usb flash drive at computer because of usability, easy to carry around.
so, i would like to use these functions for iphone. i want to develop mini portable hard disk for the use of iphone like computer

Not a feature of iphone.

AS3 - 1) Countdown Timer to the designated Date for Live-Broadcast-Event yet to take place; 2) Detect End of Live Stream on FLVPlayback with FLVPlayback.isLive = true - ActionScript 3 - flash cs3 cs4

Hi folks,
Ronny's here again on forums, having particularly 2 (two) questions/problems to resolve:
1) Countdown Timer to the designated Date for Live-Broadcast-Event yet to take place
2) Detect End of Live Stream on FLVPlayback with FLVPlayback.isLive = true
attached is the .zip file (as3_Countdown Timer_ver 1.0.1_by Ronny Depp.zip) with all flash source files containing:
a) The FLash Source (file: timer_module.fla) - (FLA flash source file - Flash CS3 Professional, Flash Player 9, actionscript 3.0)
b) com.othenticmedia.utils.dateAndTimeManagement package including 2 .as actionscript 3.0 Class files.
       i) com.othenticmedia.utils.dateAndTimeManagement.DateAndTimeManager Class in the said package. (file: DateAndTimeManager.as)
       ii) com.othenticmedia.utils.dateAndTimeManagement.CountdownTimer Class in the package. (file: CountdownTimer.as)
c) The compiled SWF file version of this Application's blueprint. (file: timer_module.swf).
What i need to confirm is: ........................................................ see the next post of mine. (for Problems need to be Resolved)

Problems to Resolve:
Problem#1) - Countdown Timer to the designated Date for Live-Broadcast-Event yet to take place.
Problem#2) - Detect End of Live Stream on FLVPlayback with FLVPlayback.isLive = true;
Problem#1 Description:
I need to pinpoint the Logical TimeSync Exception, i am still unable to figure out. That is I'm using a webservice in my Application to Synchronize the Time with the actual ET (eastern time) with accomodation of auto-adjustment for EDT GMT-4 (eastern daylight time) & EST GMT-5 (eastern standard time), times. I am using the zipcode: "10012" to pass it to the Web Service in urlRequest object, to retrieve the Current ET eastern time according to EDT & EST time settings for Manhattan/Brooklyn areas or others within New York, NY 10012.
Currently the Web Service is returning accurate date/time based on local EDT GMT-4 daylight time.
Is there some defined set of dates for EDT & EST times for New York region that I can check for to ensure the correct Dates/Times for Eastern Time in New York area ??? I am using NY zipcodes because i am sure to get correct ET values.
The Major Problem Part: is I need to correct the time by 2 seconds or approx. 2 secs, some millisecs.
When I retrieve the Time Value from WebService, it lags behind for 2 seconds as compared to DateObj i create using computer's local time, on my Windows XP Service Pack 2 with Automatic Updates turned-on. And I'm sure about my Windows will be having latest updates for Time Management already installed. I also added the 2 secs. to the TimeSync(ed) Date to make correction to this Date obj.
I call my custom fucntion addSeconds(dateObj:Date, secs:int) to add 2 seconds to the Date by Converting Seconds to Milliseconds.
Please comb through the as code in files attached and Help Me Out !!!
Problem#2 Description:
Secondly I need to Detect the End of Stream state while using FLVPlayback component, an rtmp:// live Stream from FLASH MEDIA SERVER.
I need to Play a YuMe Post-Roll Ad when Steam Finishes/Ends.
Live Broadcast Stream Event starts every night on Wednesdays & Saturdays exactly at 10:59 PM EDT GMT-4.
Live Events only Streams/Broadcasts the stream for 50secs. exactly. When [playback stopped] it plays a PostRoll Ad and after the CountdownTimer again comes back to life. The Next upcoming Event is calculated & the Countdown begins until Next Event's time/date is reached.
Here is the code on the frame 1 on the MainTimeline: (rest of the params like source, volume, skinAutoHide are Set using Property Inspector for FLVPlayback instance on Stage)
//myStream instance of FLVPlayback is on the Stage
myStream.isLive = true;// Frame 1 Actions in the FLA
myStream.addEventListener(VideoEvent.COMPLETE, onEndOfStream);
myStream.addEventListener(VideoEvent.STATE_CHANGE, onState);
myStream.addEventListener(String(VideoError.NO_CONNECTION), onStreamError);
myStream.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
/*if(myStream.stopped){
     trace("tracy: "+myStream.state);
} else if(myStream.state == VideoState.STOPPED){
     trace("tracy: "+myStream.state);
function onStreamError(event:VideoError) {
     trace(event.code + "\n\t" + event);
function onState(event:VideoEvent) {
     trace(event.state + "\n\t" + event.toString());
function onEndOfStream(event:VideoEvent) {
     trace(event.state + "\n\t" + event.toString());
function netStatusHandler(event:NetStatusEvent):void {
     switch (event.info.code) {
          case "NetConnection.Connect.Success":
               //connectStream();
               break;
          case "NetStream.Play.StreamNotFound":
               trace("Stream not found: "/* + myStream.source*/);
               break;

Analyzing data for max peak time differences after sampling

Similar Messages

Maybe you are looking for