Android - long frame delay causing wierd screen redraw

I am building a game for android devices using Air 3.5 and Flash Builder 4.6
Some of my game sections have quite a bit of loading to do, so broke them up on a time to only load a little bit at a time, thus allowing enter frames and timers to fire between each chunk... and I put a spinning tumbler on the screen as a wait indicator.
however, some of the chunks still take a bit of time to execute (usually when processing large images and such) and can take several hundered milliseconds to execute.
Now, this is not the problem.
The problem is that on these frames that take longer than 33 milliseconds (fps is set to 30) the spinner on screen seems to "jump" backwards for a partial frame.
It's almost like the when the current enterframe runs, there are 2 screen updates occuring... the first update shows the screen contents as they were before the screen started to redraw, and the second updates the screen to what it should be now.... the result is that for that partial frame update, the spinner seems to "jump back" a couple of frames.
This does not occur on the iOS devices or the pc, only android.
Anyone know what could be causing this and how I could stop it from occuring?

Found out what the problem was.
When I was drawing text as an image, I would convert the stage quality to best, do the drawing and convert it back to low.
Since was old code left over from a while ago. I have since altered this code to use drawWithQuality instead and took out the stage.quality changes and the problem has gone away.

Similar Messages

  • I had completed my iDVD project and burned a disc. It worked great! Then someone messed with the project and put a red frame around the opening screen. Now when I burn the project, it no longer has the opening frame. How can I fix?

    I had completed my iDVD project, a Wedding Slideshow with pictures and music, and burned it on a disc. It worked great! Then someone messed with the original project on my computer and clicked around and put a red frame around the opening screen that has the Wedding theme with music. Now when I burn the project to make more DVDs, it burns but no longer has the opening frame. It immediately opens to the iMovie slideshow. How can I fix so I can burn the entire project with opening frames?

    As Bengt suggested make a disk image of the successfully burned DVD using Disk Utility. Then you can burn copies any time you need one.
    In the future once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option.  This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good.
    You can then burn it to disk with Disk Utility at the slowest speed available to assure the best burn quality.  Always use top quality media:  Verbatium, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • Calculating how long each frame should be on screen?

    I'm going to bring a lot of still frames into FCP, say 1000 and I want the Sequence to be 24 FPS. How do I calculate the amount of time that each frame should be on screen?
    Thanks.

    Thanks, I guess what I should have asked was how to enter that into the duration field for the frame. If 1 / 24 = 0.0416666667 how does that translate to 00:00:00:00
    Pardon my ignorance.
    Thanks.

  • Animated Gif - Problem with Frame Delay

    Mac OS X 10.5.8 
    PSE 6.0
    I just created an animated gif by following the steps in PSE Help.  It says that I should be able to adjust the rate at which the images rotate by changing the Frame Delay measurement but I am unable to change it.  In fact I am unable to change anything in the Animation section of the dialog box. 
    When I check Animation, the options appear to become active (they're no longer greyed out) but I can neither uncheck the Loop option nor change the Frame Delay option.  All other sections of the dialog box work fine.
    Your help would be most appreciated!
    Beth

    Unfortunately this is broken in PSE 6 and PSE 8. You can tab into the frame delay box if you start above it someplace on that side of the screen, and it appears to let you change the rate, but your choice doesn't really affect the actual frame rate. The only workaround is to duplicate frame layers that you want to stay onscreen longer (so it will be changing just as fast, but not visibly).

  • Premiere Pro CC, Quadro 4000 and Screen Redraw bugs

    Not sure if it's just the 7.1 update, but i think i started seeing it in the previous version.
    When i start using transitions then my main UI screen redraw messes up. So for example pop a wipe onto some footage then the timeline bar doesn't move when playing and i cannot click the sequence footage elements. I can play in the monitor. If i guess where the close box is for the sequence and open the sequence again it redraws correctly.
    I've updated the drivers to the latest versions and also confirmed on a different PC that the problem isn't there. So it's unique to my set up.
    I'm running on Win 7 x64, 32GB. About the only recent change to my system was a 10Gbe card but i've duplicated the problem just with local drives.
    In fact it's as simple as if i start up CC then click the project tab, media browser tab, info tab, effects tab the search box in the effects tab doesn't redraw fully.
    Any ideas what could be causing this?
    (I do have a decklink extreme in there but have got the output turned off at the moment - tried it on and off- same problem)
    I really don't remember this happening in the past but it was the transitions that revealed it, and i don't normally use them.
    Help!
    cheers
    Paul

    Thanks for the update,
    The question is how long for because i'm sure that my installation was fine, then stopped working. If you drag a transition onto the timeline does the time line still update, can you grab the timeline cursor and drag it back and forth.
    We're not alone, there's another thread with what looks like the same issues
    cheers
    Paul

  • Question: Frame delay issue - gif animations on Mac

    I have been unable to change the frame delay rate using Photoshop Elements 9 on Mac when trying to create animated gifs. This seems to be a known problem but is there a fix? Does it work on later editions of Elements?

    Thanks for this.  However, it is rather disappointing that this option was released in PSE9 for Mac even though it didn’t work properly.  I spent rather too long trying to get it to work on my Macbook as I knew it worked perfectly well on the PC in the office!

  • Skype video crashes my GPU driver and causes blue screen.

    Hello,
    Installed a new copy of windows and got the latest version of skype for my PC (on wich skype worked just fine, video calls, voice calls, but it was an older version. No hardware changes)
    With the new skype, I , for the least, get driver crashes, and for the most, a blue screen, when I just go to options to set up my webcam.As soon as I see the square "loading" my webcam in the options, everything freezes and I get a driver crash or a blue screen.
    Current specs:
    i5 4440, stock clocks
    2x8gb 1333 ddr3 1.5v ram, stock
    R7 260x, stock
    500w PSU, not the best quality, But I also tried a 1000w platinum PSU, and same resaults.
    last error code I remeber from the blue screen was: 0x00000116
    I know it is related to the GPU, but it doesn't have power deficiency, since I manage to run heavy games just fine.By the way, my webcam works just fine on different web sites, so it's not the webcam.
    What I tried:
    -Degrading to the oldest supported version by skype
    -Degrading video drivers
    -Using different webcams
    -Installed all windows 7 64 bit updates
    edit:
    skype 6.14 works, but newer versions crash my GPU drivers and cause blue screen

    I would suggest uninstalling Droidcam as it could be the source of some delays assisting in causing the problem.  TDR problems occur when your videocard is unable to respond in 2 seconds for a variety of reasons (heat, tweaks), forcefully resetting the card.  Some people increase this delay in their registry from 2 to up to 10 seconds to give the card time to catch up so that a reset doesn't occur.  You can try this MS fix it which increases this delay. https://support.microsoft.com/en-us/kb/2665946

  • Extremely long print delay - Mac

    I am experiencing very long print delays or, in one case so far, an error message.
    I downloaded Adobe Reader for Macintosh 11.0.02.  I have a Mac Mini with OS X 10.8.2.  The Mac Mini has USB 3.0.  My printer is a Brother MFC-8440 local printer, USB 2.0.  The printer driver has been updated and is current.  The Mac and Brother printer are connected via USB.
    I am able to print the PDF files as images but not as documents.  Most of the PDF files I have tried to print as documents have done so but they take FOREVER to print.  For example, a 28 page PDF file might take the better part of an hour to print (that may be an exaggeration but not by much).
    But on one PDF file that I tried to print I got some weird error message on the document that printed.  It says,
    ERROR NAME;
             ioerror
    COMMAND;
            flushfile
    OPERAND STACK;
            --filetype--
            --arraytype--
    Strangely enough, I can see the document on-screen just fine.  But the only thing that printed on the sheet was that error message.
    I am able to print documents from other applications such as Word without any issue.  So this seems to be isolated to printing PDF's.
    I previously used Adobe Acrobat 9 Pro for Windows on my old PC (XP Pro, SP3, same printer) until I recently switched to the Mac.  I never had any issues with printing PDF's in a fairly quick manner with the PC.
    I am only using Adobe Reader now.
    My guess is that with the Mac there is probably some sort of bug in the processing software with the Brother printer.  The Brother printer has an LED that flashes as the data is being downloaded.
    Any help would be appreciated.
    Thanks!

    Does this mean the "data" goes from MBP wirelessly to AE then "upstream" to the Modem/router then back to AE then USB to printer?
    No, the data should travel from the MBP wirelessly to the AEBS, and then, to the printer via the USB port on the AEBS. If; however, a network client is wired to the D-Link, then data would travel from the client to the D-Link, and then, by wire to the AEBS before it goes out the USB link to the printer.

  • Screen redraw bug when panning in Loupe view at high magnification

    I think I've found a bug in Lightroom.
    Using the Loupe view at higher than 1:1 magnification and panning whilst zoomed seems to cause screen redraw artifacts. It is most noticable at high zoom (say 11:1) when panning diagonally. The edges being revealed draw incorrectly. Seems to only happen once the 1:1 preview rendering has been completed, initial panning whilst the preview is being rendered looks fine. Zooming out and back in redraws the screen correctly, but subsequent panning still causes artifacts.
    I first thought it must be my graphics drivers, but have updated to the latest available driver (version 7.2 21 Feb 2007) for my ATI Radeon 9800 and the problem remains. I have also tried this on my laptop a Sony VAIO VGN-S3HP (with NVidia GeForce 6200 based graphics) with the same problem. Therefore as this happens on both a NVidia and an ATI card I can't blame my graphics drivers any more.
    Can anyone reproduce?
    Best regards,
    Andrew

    I've just seen a similar problem on my DELL laptop. Anything at 2:1 or greater magification gets the jagged edges whilst panning up and down in loupe mode. This makes the compare mode to be worthless as the two images can't be compared as they each suffer different amounts of jaggies.
    Windows XP, Intel Mobile 915GM/GMS, 910GML Express Chipset.
    I'm going to raise a bug report.

  • Long Audio Delay

    I'm running on Mac 10.7.3 using the latest free trial of Adobe Connect.
    I'm experiencing very long audio delays (5 seconds or more) when in a meeting room. I've searched the forums and found this   Re: Long audio delay By jonturkle, posted Nov 20, 2008 by this doesn't seem to match my situation as I'm not in a hosted environment or behind any firewalls that would restrict ports. (Or at least I don't think anything like this should be going on)
    Video streams fine, so it doesn't seem to be a bandwidth problem, just a lag with audio.
    Has anyone got any ideas what might be causing this and how it can be fixed?
    Thanks
    James

    By free trial of Adobe Connect, are you talking about Hosted Trial? or did you build a server?
    If it's Hosted trial, then you are in a hosted environment.
    In the upper right corner of your meeting, see the vertical green bar.  Click that - to see your connection /latency.
    In the room, choose Meeting / Preferences.
    Set your preferences for bandwidth to DSL/Cable
    Then run the audio setup wizard.

  • INdesign CS5 and Lion Screen redraw errors

    I have been running INdesign 7.0.4 with Mac OS 10.7.2, I am getting screen redraw issues and ghosting when scrolling or making any edits. I have trashed the prefs, repaired my disk permissions to no avail.
    Anyone else having this issue?
    Thanks for your help!

    Ah, this is easy.
    You have a problem with the SING module, see http://kb2.adobe.com/cps/408/kb408816.html.
    2619 ???  (in Document Actions)  load address 0x12061000 + 0x2e08  [0x12063e08]
    2619 GetPlugIn  (in AppFramework) + 57129  [0x1103f769]
    2619 GetPlugIn  (in AppFramework) + 54943  [0x1103eedf]
    2619 GetPlugIn  (in Font Manager) + 205284  [0x12b17074]
    2619 GetPlugIn  (in Font Manager) + 54889  [0x12af24f9]
    2619 GetPlugIn  (in Font Manager) + 53411  [0x12af1f33]
    2619 GetPlugIn  (in Font Manager) + 54444  [0x12af233c]
    2619 GetPlugIn  (in Font Manager) + 53832  [0x12af20d8]
    2619 GetPlugIn  (in Font Manager) + 46910  [0x12af05ce]
    2619 GetPlugIn  (in Font Manager) + 160199  [0x12b0c057]
    2619 GetPlugIn  (in Font Manager) + 124761  [0x12b035e9]
    2619 GetPlugIn  (in Font Manager) + 430364  [0x12b4dfac]
    2619 ???  (in Font Manager)  load address 0x12abd000 + 0x2000a  [0x12add00a]
    2619 GetPlugIn  (in AppFramework) + 57129  [0x1103f769]
    2619 GetPlugIn  (in AppFramework) + 54943  [0x1103eedf]
    2619 GetPlugIn  (in SING) + 21595  [0x106e933b]
    2619 GetPlugIn  (in SING) + 20802  [0x106e9022]
    2619 GetPlugIn  (in SING) + 52092  [0x106f0a5c]
    2619 SINGDLLStorage_GetGlyphlet  (in SING) + 94  [0x1801977a]
    2619 SINGDLLStorage_GetGlyphlet  (in SINGCore) + 127  [0x180a527b]
    2619 SINGStorage_GetGlyphletWorker(_t_SINGCtx*, char const*, unsigned long, unsigned char**, unsigned long*)  (in SINGCore) + 87  [0x180a4eb9]
    2619 GetDocument(_t_SINGCtx*, unsigned long)  (in SINGCore) + 280  [0x1809a820]
    2619 SINGLIB::ContextImpl::GetRootDocument() const  (in SINGCore) + 269  [0x1805d92b]
    2619 SINGLIB::CatalogOperationContext::CatalogOperationContext(boost::shared_ptr<SINGLIB::Context>)  (in SINGCore) + 155  [0x180820cd]
    2619 SINGLIB::SystemLock::Acquire()  (in SINGCore) + 32  [0x18082b12]
    2619 __sem_wait_nocancel  (in libsystem_kernel.dylib) + 10  [0x9c62bb7a]

  • Performance Issues - Screen Redraw etc.?

    I have a new MacBook Pro 15" (8GbRAM, 2 GHz i7) Using 30" Cinema Display, OS 10.7.2. I'm using Photoshop CS 5.1 (12.1 x64) Extended. After working for awhile I get performance lag -mostly drawing, cloning etc. Then the cursor starts behaving unpredictably -usually drawing slightly BELOW where the crosshairs are. Then the screen refreshes slows and the screen redraw occurs in very large blocks -VERY slowly. Reloading PShop doesn't help, but rebooting the laptop does solve the problem -until it happens again. In an earlier post I was advised that PShop CS4 was the cause (not compatible w/Lion). But I now have the latest version of Photoshop (my primary application).
    - In this situation, I would suspect corrupted PShop Prefs, but I don't think that's the case, as reboot solves the problem. It was also the exact same issue when I ran CS4.
    - Could this be an issue wuth using the 15" Macbook Pro with a 30" display? I was also advised that I could NOT upgrade the video card (soldered to motherboard) but this is not a MacBook Air.
    - RAM issue? I did upgrade to 8Gb -but I purchased quality RAM from a reputable dealer. I have had no crashes or other issues (other than the Photoshop issue. I will test the RAM.
    - Any know CS5 issues/bugs in this area?
    Thanks

    I think you're seeing more of the 1.7 video driver bugs.  The cursor offset is a known one, along with some "cursor doesn't draw correctly" bugs.
    You can try turning off OpenGL drawing in preferences to avoid many of the problems (don't know if that'll fix the cursor or not).
    But the real fixes need to come from Apple fixing their display drivers.

  • I wanna try a sleep hypnosis video on youtube which last eight hours, is it okay to leave it on video for that long? Or will the screen overheat?

    I wanna try a sleep hypnosis video on youtube which last eight hours, is it okay to leave it on video for that long? Or will the screen overheat?

    Intensive video games can cause some heating, but if it's just a video showing it shouldn't be a problem. An iPad 3 or iPad 4 is more likely to heat than the iPad 1 or iPad 2 due to the retina display.
    Do you have to view the display the whole 8 hours? You may want to lower the screen brightness.
    You will probably have to keep the iPad plugged into the wall charger.
     Cheers, Tom

  • Screen redraw issues after update to 10.7.4

    Anyone else seeing screen redraw issues since updating to 10.7.4? Suddenly, the zoom tool stops working or causes visual errors.

    thank you FFS48, it really helped and might work fine as temporary solution. I was about to restore my OS from backup to 10.7.3 version... as booting from it made no errors. The latest 10.7.4 update filled my log filles with different error messages like:
    2012-05-10 23:53:17,000 kernel: SMC::smcReadKeyAction ERROR PC2C kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8030d4f000
    2012-05-10 23:53:17,000 kernel: SMC::smcReadKeyAction ERROR PD0R kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8030d4f000
    2012-05-10 23:53:17,000 kernel: SMC::smcReadKeyAction ERROR PN1R kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8030d4f000
    2012-05-10 23:53:17,000 kernel: SMC::smcReadKeyAction ERROR PG0C kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8030d4f000
    which might be caused by iStatMenus as these log entries are allways next to iStat log entries.
    I often need to access my Mac Pro using Back to my Mac from my MBP. Do you know will it still be possible having WiFi on MacPro off?
    It is strange, that the latest update delivered more visible problems than benefits....
    What I tried to solve the problem and that did not work:
    - Disable WiFi sync on iTunes (after reading some forums discussing similar problem)
    - Uninstalled Xcode (as some forums suggested)
    It is some how related to WiFi and iOS devices that sync to that computer. Switching these iOS devices off - removes the problem, and I believe it should be reported to Apple.
    Is there any URL to Apple bug submit form?

  • Screen redraw stair-stepping/artifacts

    Hi,
    I have been a long time Photoshop user and am having screen redraw problems since I have purchased a new system. I did not have this problem on my Macbook Pro which was hooked up to the same monitor.
    Problem is: When I open a file in CS5 (12.0) and move the image around screen Its not redrawing smoothly. There is some stair-stepping artifacting going on. Its not lagging....just creating some stair-stepping like artifacting.
    If I open the same file in "Preview" (version 6.0) and recreate the same image movement there are no problems.
    So I am suspecting not a monitor problem, but maybe a graphics card problem....??
    Any one else experiencing something like this?
    System is Mac OS mountain lion 8.0
    Mac Pro 3.2 Quad core (5,1)
    Monitor NEC PA271W (W/spectraview)
    GPU is ATI Raedon 5770
    Monitor to Mac connection is DVI to DVI

    software update did not help...but turning "on" vertical sync did! It still doesn't look as smooth to me as it should, but its greatly improved. Maybe I'm just scrutinizing it too much now

Maybe you are looking for

  • Error when calling a stored procedure from a SQL Script

    Apologies if this is a really dumb question but I can't seem to call a procedure in package from a SQL script. I have a simple package.procedure containing a loop to populate a table. I would like to include a call to this procedure from my database

  • I can't get into my Mini Mac

    HELP!!!! I have recently revided the set up my Mini Mac with two user accounts. No problem. Because the other user could access files on my hard drive, I set up an access code to the hard drive in order block the other user's access...big mistake. No

  • Certificate Not Verified for Wifi WPA Enterprise

    Hi all I have a MDM server to deploy profile to all enrolled devices (iPhone4s, iPad...etc) for wifi setting (WPA2 PEAP SSID: M_WEP_ENT). But I found one issue, if users have ever connected to M_WEP_ENT and accepted Certificate. After deploying profi

  • SpamAssassin's AWL database growing and growing

    I know that this is a known problem, but maybe someone has found a solution in the meantime that did not came to my attention: I'm using the auto whitelist feature of SpamAssassin. Unfortunately I'm forced to erase the entire database from time to ti

  • My Illustrator CS5 freezes when I open the programme or a file

    I have a MacBook Pro 5 with Mac OS X 10.6.8, I use Adobe MasterSuite CS5, although the only programs fully installed from it are Photoshop, Illustrator, InDesign and Flash. I rarely use Flash, but rely on the other three heavily for work. I opened an