Annual Budget by Month table no longer working.
I am using a "budget" spreadsheet created using a template from an older version of Numbers, and now using newest version of Numbers on Mac and iOS devices. It worked fine for years until a few weeks ago, when the "Annual Budget by Month" stopped importing the "Planned Expenses" monthly data into the table. Formulas seem intact and unchanged.
For example, where the planned expense for a given month should be listed in the "Annual Budget by Month" table is $0 (when actually more than that) and the formula is as follows...
SUMIF Planned Expenses::$Month, B1, Planned Expenses::$Amount
Any help greatly appreciated.
Is this happening only with that one row? What about the "Additional Income" row which uses a similar formula?
If my suspicion is correct about the cause of this problem, both of those rows will be zeros. I am assuming it is Numbers interpreting the month names as Date & Time values, including an implied year, and for some reason they don't have the same years in these tables. To test this assumption try the following:
In the Annual Budget by Month table, type a space after one of the month names. So, instead of "January" it will be "January ". Pick a month that should have a value for Planned Expensees. The space will turn it into text that will not be interpreted as a Date & Time.
In the Planned Expenses table, edit one of the popups so the same space is in the month name. Obviously edit a row that has that month selected.
Does the Planned Expenses row include the amount from the row you edited?
Similar Messages
-
Add a line on the Annual Budget by Month
I am working in the Personal Budget Template of Numbers '09. I want to add an additional Income and Expense line on the Annual Budget by Month. The table I made is a copy of the Monthly Expenses Table and I would like the line on the Annual Budget by Month to work exactly the same as it does for the Monthly Expenses Table. I don't know how to change that formula so it caluclates correctly. What should I do?
I'm curious why you need a new table for this.
If you are adding a single (monthly) expense category, why not just insert it as a new row in the Monthly Expense table.
The only formula on that table is =SUM(B), in the Footer row (row 10) of the table. That formula will not change when one or more rows is inserted into the table between the Header row (row 1) and the Footer row.
On the Annual Budget by Month table, cell B5 (and the cells to the right of B5) contains the only formula referencing the total monthly expenses:
=Monthly Expenses :: $B$10
If a new row is inserted in the Monthly Expense table, that formula automatically changes to accomodate the new address of the SUM(B) formula (now in Monthly Expenses::B11):
=Monthly Expenses :: $B$11
If you DO need to add a new table (for demonstration purposes, I'll name it "New Table", Then you win need to add a row to the Annual Budget by Month table. SInce you haven't said whether this will be an Expense table or an Income table. the best place to add it (in terms of describing what to do with it) is between rows 4 and 5 of Annual Budget by Month. Here's the procedure:
Ensure that New Table and Annual Budget by Month (ABbM) are on the same sheet, and that both are visible without scrolling.
Click on any cell in ABbM to activate that table and show the row reference tabs.
Hover the mouse over the Row 5 reference tab, and click the triangle when it appears. Choose Add row above. The new row will be the new Row 5.
Click on cell B5 (in the empty row). Type an = sign to open the Formula Editor.
Click on the the cell in the footer row of column B of New Table (B10, unless you have changed the number of rows in this table).
In the Formula Editor, hover the mouse over the cell reference (New Table :: B10). When the triangle appears, click it, and choose the second item, Absolute row and column.
The formula should now read: =New Table :: $B$10
Click the green checkmark to confirm the formula and close the Formula Editor.
Use the Fill control handle (small circle at bottom right of the selected cell) to drag and fill the formula into the rest of Row 5 of the table.
You'll need to also make an adjustment to the formula in the Footer row of ABbM.
The current formula in the cell (originally B7) was: =SUM(B2:B4)-B5-B6
After the insertion of a new Row 5, it changed to: =SUM(B2:B4)-B6-B7
The adjusted formula will be one of the two below:
If a positive sum in New Table indicates an Expense:
=SUM(B2:B4)-B5-B6-B7
OR
=SUM(B2:B4)-SUM(B5,B7)
If a positive sum in New Table indicates Income:
=SUM(B2:B5)-B6-B7
Fill the appropriate formula in B8 right to M8 (December).
Regards,
Barry -
Verizon 9100EM Router - ARP Table No Longer Working
I have the Westell 9100EM router from Verizon. The router allows to set static DHCP connections using a function called ARP Table (under Advanced menu). It actually used to work. However, when I attempted to add a new static connection today, ARP Tbale was no longer working. It shows connections that I set up in the past but does not allow to add any new connection or even to change anything.
Specifically, the ARP Table now has only three columns (IP Address, Physical Address, and Device). There used to be several additional columns (Lease Type, Connection Name, Status, and Action), which are now gone. The "Action" column had links from where one could change the setting. It also had the option "New Static Connection", which is now gone as well.
Any idea what the reason could be?
Thanks a lot.It seems to me that the router's firmware (OS if you will) was upgraded OR downgraged.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button. -
Changed provider and now fake table no longer works
Dear all,
I have moved to a new provider and uploaded all my exsisting files. Now I see that mail() and fakeRecordset no longer works. I am thinking that this maid be php version related I run at this stage 4.4.9
kindly advice on how to resolve this problem
Thanks
Danny
Error:
Interne fout.
Developer Details:
tNG_fields.getFakeRecordset:
SQL error: Error creating temporary table:
You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'return TEXT, cover TEXT, offerte_carID TEXT)' at line 1
SQL:
CREATE TEMPORARY TABLE KT_fakeRS_20081125 (offerteID TEXT, periodID TEXT, carID TEXT, van TEXT, tot TEXT, pickup TEXT, return TEXT, cover TEXT, offerte_carID TEXT) (FIELDS_FAKE_RS_ERROR)
tNG Execution Trace - VIEW
tNG_insert.executeTransaction
STARTER.Trigger_Default_Starter
tNG_insert.getRecordset
tNG_insert.getLocalRecordset
tNG_insert.getFakeRecordset*Hi,
Now I see that mail() and fakeRecordset no longer works
it´s the column name "return" which is a so-called "reserved word" (here´s a list of reserved words: http://www.htmlite.com/mysql002a.php) and triggers the SQL syntax error.
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver -
Month Scrolling No Longer Works In Calendar (Mavericks)
Not sure what is causing this but I can no longer scroll in Month View on Calendar. I can use the arrows (top left corner) to go back and forth (not scrolling) and scrolling DOES work in other views (Day, week, etc). Also, vertical scrolling DOES work in all my other apps with my trackpad. Just NOT Calendar.
I haven't changed or updated anything related to calendar or made any system changes. Running latest Mavericks. Trackpad is fully charged. I've restarted the computer (works briefly after that but sticks shortly after). Did permission repair and PRAM rest. None work.
Any ideas?Issue appears to have resolved itself after a couple of days. Go figure.
-
Numbers tables no longer work properly.
Creat new record all alpha time date fields become standard number entry. This used to work fin but not now. Please fix.
After the latest update, I did have some issues with formatting. My date cells turned into Automatic format. I am nearly positive, the format "Automatic" did not exist on the iPad version before the last update.
I don't use Forms much, so I didn't see your issue, but I suspect that is probably your issue. You used to have the cells formatted as Text, Date, Time, and Number and now they are formatted as Automatic, so the Form doesn't know what keyboard you want to show.
I think you should check the format of the cells in the table. Select a cell and then tap on the little paint brush in the upper right corner. Then in the Format area, you'll probably see a checkmark next to Automatic.
I would select the whole column that is suppose to be Text and set it to Text in the paint brush menu. And repeat for each column Date, Time and Number.
Then go to your Form and see if it has returned to the pre-update behavior. If not, maybe you can post your file somewhere or send it to me (email address is in my profile) and I'll see if I get the same behavior you are seeing. -
How to extract data from monthly tables for annual balance chart?
Hello Again!
I am wanting to decide whether to enter all of my transactions into one table for the whole year or separate tables for each month. If I was to use one table for the whole year it would probably have in the region of 1000 entries, and as I understand it, Numbers doesn't work so well with such large tables. Also, as I will be mostly using Numbers on my iPad, where it runs slower, this may well slow things down considerably. Another reason for using Monthly Tables is that it would be easier to search.
Having said this, I am using the following method to construct balance charts for my accounts which seems to depend on having just one table for all transactions for the year. Here is a sample of the transactions table:
which updates the balance for each account after each new transaction is entered.
Then I use the following table for creating the balance charts:
It uses the following formula to return the balance at the end of each week for each account (this is the formula for Account 1) which then is displayed in the chart.
=LOOKUP(A2,$Week Number,All Transactions :: Account 1)
If I was to use the Monthly Tables method it is not obvious to me how I would create the Weekly Balance Table, given that I would need to draw data from 12 different tables, and that some of these Tables would contain the same Week Number (for weeks that overlap months).
I would be grateful for any advice on achieving the result I am looking for by the most efficient method.
Thanks
Nick
P.S. Hopefully this is the last question for a while!I wasn't urging you to keep an annual table but to spit it on an easier to rule basis.
Split it in chuncks of exactly 35 days starting from the first one of the 'year' in operation
Doing that everything will be easier
the index of a day will be calculated by
=DATEDIF(B,D,"D")+1
The index of the 'custom_week' will be calculated by :
=1INT((DATEDIF(B,D,"D")1)/7)
So, it would be easy to gather datas from a given 'custom_week'.
Yvan KOENIG (VALLAURIS, France) jeudi 5 août 2010 10:22:25 -
My ear buds that I bought a few months ago shocked me and no longer work is there warranty on these?
I had my headphones in my 5s when I was running and all the sudden my ears got shocked. I know it was from ESD. Only problem is my headphones no longer work. I just recently bought them like 2 months ago. Shouldnt there be a ground in these headphones? Are my ear buds just bad or did I just get the short end of the stick again?
Most devices are covered by warranty in most Countries
If you headphones are Apple they certainly have a 12 month warranty and if not Apple check the paperwork that came in the box -
My iPhone no longer works with my wi-fi network. It detects the network but is unable to communicate, even though until today it worked great for months. The network is Verizon FiOS Internet on an M1424WR router. PCs and iPad continue to work with the same network without any problem. Any ideas?
have you upgraded to the new ios5 software? if so that could be the issue and contact apple.
-
My iphone 5s Bluetooth no longer works in my 2014 honda accord, ever since i updated the software two months ago. Can anyone help?
Problems with Bluetooth connections are generally traced back to the vehicle. If you search here in the forum you will find a number of posts with issues connecting with Honda vehicles. Try removing the phone from the vehicle's list of Bluetooth devices. Then try removing the vehicle from the iPhone's list of Bluetooth devices. Then place both devices back in discovery/pairing mode and try to connect them. You may need to take the device to the dealer to check for software updates.
Next, I understand it used to connect, however software updates for the iPhone will load the latest Bluetooth stack into the phone and vehicles do not always get updated as often. You can also check this support document for frequently asked questions and the other for additional troubleshooting instructions. Wireless input devices: Bluetooth frequently asked questions iOS: Third-party Bluetooth accessories -
iPhone 4 Power button no longer works. 2 Months out of warranty, I haven't got $179 to replace it, any ideas? I have attempted self repairs, made the situation worse.
was attempying to put a piece of paper underneath my button, as I had seen on an online tutorial.
Did that "solve" or cause the problem??? -
When you try to delete a row in an editable table using the built-in functions, it no longer works. We use this function regularly and just noticed this problem today. The "create row above" and "create row below" functions work, just not the delete. The delete column button does work however, so it's a bit baffling why this one function does not work. (The pages are located on our internal server so are not publicly accessible but the functionality is built into firefox.)
Same problem here. I found out that when you have a table with only 1 row, it works fine, but when you have multiple rows, it doesn't work on any row.
Micmark, do you have that too?
P.S. I also tried this outside our CMS, by using Firebug to add a contenteditable="true" on a DIV in a normal font-end template, and that has the same problem. -
I have had my ipod nano 7th gen. for 2 months, and the left earbud no longer works. Can I get a replacement, and how do I go about it?
Or make an appointment at the Genius Bar of an Apple store
Apple Retail Store - Genius Bar -
Up until approx 2 months ago I could select video clips downloaded from my camera and e-mail them from Iphoto 9.4.3. This no longer works. I have tried dragging to my desktop and exporting to my desktop. I am not sure what has changed. Any ideas?
Simply, sharing video via email is not advisable.
Many email services have an attachment limit of 20mb and some a limit of 10mb. As emails are sent through an array of relays, the effective limit is the smallest file size allowed on any of the relays. That means that video is rarely suitable for emailing.
Then there's the whole issue of Codecs and not all machines will have the codecs to play all videos. Plus, folks with slower connections can find it very inconvenient to download large video files.
Finally, sharing video from iPhoto via email is not supported. All that gets you is the Movie thumbnail. If you feel you must share via email then you'll need to export the video first, and attach that. Use the File -> Export command and set the kind to Original.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.
Other than that your options include:
Upload it to a sharing site like YouTube or Vimeo and email a link - these will allow the recipient to view the material online. That will avoid the codec issues mentions, and the person can still download the video file if they wish.
Upload it to sharing services like Dropbox or YouSendIt and email a link. This will require that they download the material to their machines to view.
Regards
TD -
How to find Annual Budget for a WBS element ?
Hi All ,
Is there any way by which i can find the annual budget for a WBS element ?
I have been working on this for a long time , but couldnt get the answer .
So getting back to this place .
Thanks in advance .
Regards,
Ambar .Hi,
This link may help you.
how to get the budget amt and commited amt and available amt?
Regards,
Shamma
Maybe you are looking for
-
1.3.1 freezes while generating thumbnails?
Hi, I hope someone can help me with this problem. After upgrading to 1.3.1, Lightroom freezes whenever I view my library in the grid view. The CPU pegs to 100% (on one of my 2 cores). Lightroom becomes unresponsive (spinning beach ball of death). I h
-
Photo Files and iPhoto Questions
I have a few questions in relation to my actual picture files and when they are imported into iPhoto (on my mac). Intro: Let me catch you up on my situation, I have all my picture files (around 8000 of them!) on my time capsule; most of them are orga
-
Hi This is regarding PO conditions.I want the Freight cost posted to a separate expense account.i followed the below steps. step 1- create a condition type with control data as condition class A,calculation type A,condition category B Step 2-then it
-
I am getting a fatal error at script line 1087 "unable to open destination file" when trying to install my cvi project under win98. It works fine under NT. What should I do?
-
How to set Incomplete order to set complete status
Hi Gurus, Issue background: I have one order where delivery and billing has taken place accounting doc also generated. But order INcomplete log status is incomplete, (Plant and Pricing is showing as incomplete).