Another HD cloning question

 I have been looking through the forum at have seen a number of posts on this topic. But, most covered XP and Vista and I am running win 7 64 bit. I just installed a 2nd hdd and it works use fine, but I would like to make it my primary HD. So I want to clone my existing boot drive on to my 750GB hdd. I would like to get a exact image with all partitions and functionality. I would like some suggestions as to how to do this. I would prefer to just do a drive to drive image but it seems that may not work.
 Suggestions please. I am aware that I could use the recovery disks just trying to avoid doing that.
Thanks.
Solved!
Go to Solution.

The last time I did that sort of thing, I wanted to keep my original drive exactly as it was. My thought was that I could just put it back and start over. The most important thing to me was to avoid all chance of a disaster. I had an external location (USB hard drive or network share) where I took normal backups. I used Acronis (my normal backup program) to take a full backup to the external device. I then removed the original drive and put it into a drawer. If things went badly, I would put the original drive back and be where I started. I then installed my new drive and booted using an Acronis recovery CD so I could do the kind of restore I would do if I were recovering from a disk crash. I did a recovery to the new disk keeping the exact geometry of the original, to limit the possibility of the tool screwing around with the master boot record and leaving a mess. I booted the new disk and made sure everything was there and working. At that time, I had a big unallocated space at the end of the disk. I then ran a partition tool (I use Paragon Partition Manager) to resize the partitions to what I wanted. The whole time, I had the original disk safe.

Similar Messages

  • Another color management question

    Hi folks,
    Apologies for yet another color management question, but Im getting very confused and could do with some help. I use a Canon 10D and Canon 30D. Ive come to LightRoom from Pixmantec Raw Shooter.
    As Ive gotten more serious about producing high quality images for both the web and as prints, I thought Id invest in the Colorvision Spyder2 calibration product. So my monitor is now calibrated (quite a difference from what I was seeing!) and I have a calibration profile applied.
    My needs are pretty obvious I want my images to look the same wherever theyre viewed including exported files (such as JPEGs) whether this be on my monitor (in LightRoom, a web browser, Paint Shop Pro, whatever) and on a printer.
    Perhaps Im getting confused because Im trying to compare what LightRoom does with what RawShooter does.
    In RawShooter, when exporting from RAW to JPEG, I can specify the RGB Working Space Im using and then select my monitor profile. I think that what happens is that the export mechanism takes this profile into account and, low and behold, the JPEG looks fine when viewed in any web browser - the colours are exactly the same as in RawShooter. In Paint Shop Pro they look fine too unless I enable Color Management in which case (Im guessing) the monitor profile is, essentially, applied twice! But the upshot is I seem to get the results I want.
    What I cant figure out is how I do this in LightRoom. I can make the same adjustments to the RAW image as I did in RawShooter, but there doesnt seem an option for me to select my profile on export to JPEG only the standard 3 color spaces. Anyway the result is a JPEG that looks somewhat different when viewed in a web browser, or Paint Shop Pro with Color Management turned off. However, if I turn Color Management on in Paint Shop Pro, then it looks fine. So Im assuming that my profile isnt accounted for when exporting JPEGs from LightRoom.
    So any pointers or explanations would be really appreciated. I also acknowledge that this is my first foray into color management, and feel free to tell me to go and read some introductory article (link please!) and then come back with a sensible question if thats whats needed!
    Thanks in advance.
    - Pete

    Lightroom color management.
    a.) Monitor profile used: The profile set as the default in your operating system (e.g. Windows xp). (your monitor profile software usually does this when you calibrate/profile your monitor).
    b.) Working space: ProPhotoRGB
    c.) Export color space: You can choose one of the following sRGB; Adobe RGB or Pro Photo RGB.
    There is no option (afaik) to change a.) or b.) the option you choose in c.) will affect how the exported image will be displayed in color managed applications or non-color managed applications.
    Non-color managed applications are not able to display Adobe RGB or Pro Photo RGB correctly. I guess if you wish a consistent display of your images in color managed and non-color managed applications then the only common factor is sRGB and you should export your images in sRGB color space.
    The benefits of the other expanded color spaces are in printing and you also would have to get this end of your color management correct. Printing profiles to match your printer and each paper being used etc.
    Until you can get this all sorted out you will get better results from sRGB, this is also applicable when using most commercial printing services.

  • Another external drive question

    As I mentioned in an earlier post, I've partitioned my WD 500 GB firewire 800 external drive into three partitions. My intention was to obtain a bootable backup in the first partition (100 GB) and have the other two as supplemental strorage for future use (200 GB and the remaining approx. 165 GB). After performing an immediate backup of the Macintosh HD into the first partition, I read that a "duplicate", not "backup" was required for boot purposes.
    I'd really appreciate some suggestions here from those with more experience in these matters. My internal 500 GB HD has approximately 28 GB of used capacity currently (this will grow, of course, over time). Should I have created a partition for a bootable start up and "duplicated" the internal HD? Then, should I use a second partition for normal backups? What size should these partitions be configured to allow for maximum future storage, without pushing the limits on the backup/startup partitions? And finally, what are the steps to re-configure the external to achieve my desired intentions?
    This is a lot of question, but I certainly appreciate the guidance provided me thus far in my early days of Mac enjoyment. Thanks.
    iMac 24 2.33/3G Ram/500G HD/7600GT/BT K/M /WD 500GB FWHD   Mac OS X (10.4.9)  

    Hello! Sounds like you have thought it out well. All you need now is to clone your main drive so it will be bootable. You can do that using CarbonCopyCloner, SuperDuper, or you can use the Apple Disk Utility you already have. A lot of people use SuperDuper and others swear by some of the others. Below are listed Kappy's steps to do it using the disk utility. I use several bootable backups just for peace of mind. I generally clone to one and then the other so if something happens during the cloning (such as a power outage) I'll still have a drive that works. I usually make a clone about once a month and then backup any important documents every day to a flash drive, cd/dvd, or another hard drive volume. Once you make a clone you should always boot from it to make sure it's booting ok. Sometimes a clone will fail to boot. I also HIGHLY recommend obtaining and using DISKWARRIOR. Diskwarrior is the "gold standard" for disk drive directory maintenance which is the leading cause of hard drive problems. Using DW about once a month or after any force shutdown, forced re-start, or power outage will head off most disk problems. Tom
    Kappy's Steps to Produce a bootable clone
    Prep external FW drive:
    1. Open Disk Utility from the Utilities folder.
    2. Select the backup or destination volume from the left side list.
    3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
    4. Click on the Restore tab in the DU main window.
    5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
    6. Select the startup or source volume from the left side list and drag it to the Source entry field.
    7. Double-check you got it right, then click on the Restore button.
    8. Select the destination drive on the Desktop and press COMMAND-I to open the Get Info window. At the bottom in the Ownership and Permissions section be sure the box labeled "Ignore Permissions on this Volume" is unchecked. Verify the settings for Ownership and Permissions as follows: Owner=system with read/write; Group=admin with read/write; Other with read-only. If they are not correct then reset them.
    For added precaution you can boot into safe mode before doing the clone.

  • Object cloning question

    Hello all,
    I have a question about cloning a class. My class is something like this...
    public class Message implements Cloneable
      int id;
      Fields fromClient;
      Fields fromProcessor;
      Fields toClient;
      Fields toProcessor;
      protected Object clone() throws CloneNotSupportedException
        return (super.clone());
    }FYI, the Fields object is another class that contains a Vector of Field objects... A Field is simple class containing three strings, one string named name, one is named value, the other string is named defaultValue.
    At application startup, I create this class and each of the Fields objects are initialized with various Field object stuff.
    Message baseMessage = new Message();Later in the process, when I need to create a new Message object, instead of doing a 'new' I instead do a
    Message msg1 = baseMessage.clone();The newly cloned msg1 object is then processed and manipulated.
    The problem I am having is that on the next call to
    Message msg2 = baseMessage.clone();the newly cloned msg2 object contains the contents of msg1! This is very strange because I thought that msg2 would be a clone of baseMessage which does not contain any of the information found in msg1...
    Any ideas? I hope I explained it well enough...
    Thanks,
    -Jeff

    Also, did you realy intend your clone() method tobe protected?
    I am not really sure why a make the clone()
    protected. I most likely read somewhere that it
    needed to be protected... Is this a bad thing?Not necessarily. It depends on who you want to be able to clone your object. If you want everbody to be able to, make it public. If you want only classes in that package and subclasses of your class to be able to do it, make it protected. I just wondered because public is probably more common.
    As for your other comment about why you weren't using new: You can still use new to make a deep or shallow copy. It's called a copy constructor.
    public class Message {
      public Message(Message orig) {
        field1 = orig.field1; // shallow copy
        field2 = new Field2(orig.field2); // deep copy, assuming Field2 has such a constructor
        etc.
    }

  • Another check box question

    For some reason all my songs have become unchecked. I don't know why. Is there an easy way to recheck them all. Rather than having to click in every box? It seems that because the aren't checked Genius will not recognize them. They were all working until today.
    Thanks in advance

    Flushkie wrote:
    I copied 250 gig of music from my old pc hard drive to my desktop. I just imported them to iTunes by adding them to my library. Now that the music is all in iTunes, I can delete the large music file on my desktop?
    This is another topic that should have it's own thread.
    To answer your question. It depends on if you had <iTunes/Preferences/Advanced/Copy files to iTunes Media folder when adding to library> checked. If the files were copied then you have duplicates and the files on the desktop can be deleted. If the files were not copied then the files on the desktop ARE your music files.
    Tracy

  • Yet another Try Catch question. Iterating through a ForEach loop

    Confused on error handling in a Powershell ForEach loop. I’m looping through a list of registry keys, attempting
     to open each one. If it succeeds, I do a bunch of stuff. If it fails, I want to skip to the next iteration.
    If I was doing It in VBScript I’d do this:
    For Each Thing In colThings
    Open Thing
    If Err.Number <> 0 Then
    “oops”
    Else
    Do stuff
    Do stuff
    Do stuff
    End If
    Next
    This is what I came up with in PowerShell. It seems to work, but just doesn’t seem powershell-ish. There must be a better way to use the catch output than just creating a $return variable and assigning it success or fail?
    ForEach ($subKeyName in $subKeyNames)
    try{$subKey = $baseKey.OpenSubKey("$subKeyName")}
    catch{$return = "error" }
    If($return -eq "error" )
    “Oops”
    Else
    Do stuff
    Do stuff
    Do Stuff

     
    I totally get what you're saying about formatting. I don't' have any habits yet, since I've only been working in Powershell since... well, what time is it now?
    Unfortunately, It Has Been Decreed that we are no longer to use VBScript for any engineering solutions at work, so my 15 years experience in it now needs to be transitioned over asap. I don't have the luxury of crawling before I run. I'm trying not to be
    frustrated, but it's like an English major waking up one day and being told "You must now speak French exclusively. Here's a book."
    The Do Stuff example of my ForEach loop is about 50 lines of code involving matching values in subkeys of this registry key with another and collecting output. I tried wrapping the whole thing in a try section based on some examples, but it seemed odd, that's
    why I'm asking. I'm used to tightly focused error handling at the point where an error may occur.
    In this example I'm only interested in whether or not I can open the subkey (it exists, but I may not have permission). If I can't, there's no point in continuing with this iteration of the loop, I want to skip to the next one. So why include all the "Do
    Stuff" in the the try section? From a readability viewpoint, it doesn't seem helpful.
    Also, there may be more error handling deeper in the code. If I then put that in a try/catch, and then something else inside that, now I have nested try/catches mixed in with nested if/elses, all wrapped in a For loop.
    Again, I can see how it works logically, but for readability not so much, and having all these braces 50 lines apart to match up is giving me eye strain :).
    It sounds like David is agreeing with jrv, that putting the entire ForEach loop code into a try/catch is the conventional way to do it. I guess it makes as much sense as putting it all in an If-else-Endif, and I just need to adjust my paradigm.
    But if not, my specific question was more along the lines of, is there a built in way to tell that the catch section has been executed, rather than me using it to populate an arbitrary variable and then read it? In VBScript, you execute something, and the
    next line, you check the Err.number. I wasn't sure if you could do that with a try/catch.

  • Another canvas related question

    Here is my scenario:
    I have content canvas (say CC), a stacked canvas (SC) and a tab canvas (TC). On the CC, I have the TC always showing in the bottom half. In the upper half of the CC, I have some text items, list items etc always showing.
    When the user selects certain options of the drop down lists in the CC and/or TC, I want to display the stacked canvas(SC) while still displaying the TC in the bottom half of the CC. SC has only a text item and an ok button on it. This text field is to capture the comments of the user. What I am trying to accomplish is to capture the user comments from the SC, assign it to a data block item when the user clicks on the 'ok' button on the SC and then hide the SC. Since there are multiple drop down list items in the SC and TC, I plan to re-use the same SC to capture the comments. Don't know if this is a good way to do it and if it can be accomplised or not. Any suggestions/ideas are appreciated.
    The issue that I am facing is when I display the SC upon changing a list item in the CC, then the TC
    disappears.Neither does the SC appear with the text box and the ok button on it.
    1. I am using the show_view to display the SC.
    2. For the SC properties itself, I set the
    Raise on entry =NO, '
    visible = 'YES'
    3. All the canvases share the same WINDOW
    4. My canvases are ordered in the following order
    SC
    CC
    TC
    5. Using forms 6i.
    Pardon my ignorance about the workings of the canvases (I always struggled to understand how the various canvases work). Also, these questions were probably asked many times before....but figured might re-ask. Pls. excuse my laziness in this regard.
    Questions:
    1. Can I have all the 3 canvases showing at a same point in time? (does reports allow that?)
    2. Has any one implemented what I am trying to accomplish? If yes, how did you do it?
    Edited by: Megastar_Chiru on Jul 13, 2010 11:30 AM
    Edited by: Megastar_Chiru on Jul 13, 2010 11:33 AM

    If the "TC" disappears, maybe the SC overlaps it.
    If the SC isn't displayed, try using a GO_ITEM('THE_TEXT_ITEM'); instead of using SHOW_VIEW.
    Another option might be:
    Create a second form and put the "comment-field" on a canvas in that form. In the WHEN-LIST-CHANGED-trigger where you actually show the SC, do a CALL_FORM to that new form to capture the users comment and proceed when the called form is ended.

  • Another .avi file question

    Hi there,
    I opened a quicktime movie in Mpeg Streamclip and exported to avi file.
    I then burned it off onto iDVD for a customer. However, she could not open it as an .avi file from her PC (to put into power point) is there any way I can burn off a DVD in iDVD that allows another to extract the .avi file as an .avi file?
    Thanks for any help!

    .. thanks, what do you mean by PC compatible disc? ...
    typical Mac-user question.. ;)) a Mac 'eats' all formats, a PC not.
    depending on how or with what your burning a dataDisk, you are allowed to select a disk's 'format' ... if you're using the Finder (insert dvd-r, drag content on it, burn..) it will care to choose a format, a PC is able to read it ...

  • Cloning question

    Hi All,
    I have a question about cloning. In copying apps tier to destination, I am asked to copy those files to appldev, and not applmgr. The database files are still under oracle.
    I am not sure what will be the impact from this? Any process or scripts I need to run to accomodate this change?
    Thanks,
    milic

    I have a question about cloning. In copying apps tier to destination, I am asked to copy those files to appldev, and not applmgr. The database files are still under oracle.
    I am not sure what will be the impact from this? Any process or scripts I need to run to accomodate this change?There should be no impact as long as the appldev user owns all the application tier node files on the target machine. So, all what you have to do after running preclone on the source application node, and copying the files is to change the ownership of the files on the target application tier node (make the files owned by appldev), then run postclone on the target node as appldev user.
    Thanks,
    Hussein

  • Copying or cloning question...

    I'm upgrading my MBP with a bigger hard drive this weekend.
    I know of a couple of recommended programs to 'clone' my HD (Carbon Copy Cloner and SuperDuper) my question is:
    Do these programs actually make an identical copy (clone) of the source, complete with any fragmentation and scattered files, or do these programs transfer the data in a logical order and reassemble files and, in doing so, de-frag the data?
    I'm guessing they do the former but wonder if the later is possible in any way.
    Would a better way of restoring the data be to install the OS from DVD, upgrade/update to it's latest spec and then run the migration program (again, I'm assuming the migration program does more than just 'clone' the data)?
    Thanks...

    They do the latter - those are file-based duplication programs, so cloning the drive with either program will defrag it (although FYI, the Mac OS automatically defrags files <20 MB in the background). It's actually more work to make a byte-for-byte copy (which you don't want to do).
    The reinstall of the OS and migrate from the old system would work too, but your easiest path in this case is just to clone the drive with either of the two programs you mentioned.

  • Just another cmp transaction question

    Hi
    I would like to know if it is possible to manage cmp transaction from the client code. For example I need to
    execute some business method several times but I don't want the container to commit transaction after each execute but only if all executes were successfull.
    Bartek

    I think I understand your post but my problem is rather different. I have a session bean with a business method named process(..) that receives as an argument a org.dom4j.Document object and does an proper action. I works fine when that process() method is called only one . But now I wan't to call it several times , each time with different org.dom4j.Document perhaps and want to have tha transaction commited only after complete whole process. I am quite new I ejbs so it is possible that is quite a silly question but I need surety that the only way to do this is to make an another session bean business method that gets as a parameter for example a collection of org.dom4j.Document objects.
    Thanks for help
    Bartek

  • I know.. not another film look question, but here is goes...

    Hi all i hope you can help me here.
    Im used to doing safety, corporate, induction videos so Ive never been interested in getting the "film look" But now Ive got a music video to do and i really don't want it to look interlaced.
    Now i did some test on my HVX200 25p, and read up on it a little. Which brought me to my question.
    I know that when shooting with real film cameras AND HD 25p cameras there is the rule not to pan very fast because it becomes jittery. But when i did my tests outside with my HVX200 25p PAL on a tripod (no panning) my footage seem a whole lot more jittery that film movies i see on tv. Its so jittery i cant use the footage! im to scared to do the music video on 25p.
    So now i want to know, am i doing something wrong? Is the shutter speed or the way you capture in FCP got anything to do with the jittery? Or is 25p just that jittery?
    Another question. Does anybody have some tips to get a better look and feel to my music video? plug ins? or whatever?
    Thanks so much for your replies.
    Andre Meyer

    Hi Meyer,
    The reason I said your video still looks jittery is because you have not graded or used any additional adaptors on your cam. Turning on a progressive shutter alone will just make your VIDEO look like 24/25P video! The movement is greatly exaggerated! The point I was trying to make is that once you have graded your footage and if you are lucky enough to use a 35mm adaptor, much of that jitteriness (if that’s a word?!) will not be so noticeable. Remember, if it goes away completely, you are back to square one almost! Its about how acceptable you can get with the 3 components I was talking about in my previous post.
    I dont own an HVX200, but I have a V1E (not as good as the HVX200) and I find the cinema Gamma not that great as a default.. I have to tweak it quite a lot to achieve the all important contrast and saturated colours. As for your HVX, just have a play until u get a look u like. The Cinema Gammas on the Cheaper Canons are dreadful and make the cam lose all their contrast! I guess this varies a lot with the mid-priced prosumer cams?!
    You don’t need to own a 5D MkII (an ergonomic disaster in my opinion unless u have the full rail kit!) to have that 35mm DOF control. There are quite a few 35mm adaptors out there that have attachments for many types of video cameras. There are users in this forum I think that use these types of adaptors with the HVX200’s. However, such equipment is not cheap.. and of course a good quality stills lens’s are not exactly cheap either!
    So to summarise:
    1. Use a progressive frame rate 24/25P
    2. Colour Grade to film... Best bet is to use Apple Colour... this is a really good colour corrector which has various preset that’s you can tweak and work pretty good as the film look. Of course you will need to experiment to get the effect u want. Alternatively, you can use Magic Bullet Looks.. which can be use used as a Plug-in to FCP, and is like Apple Colour on Steroids! It doesn’t offer the same amount of control as Color, but has some really interesting presets that can be easily tweaked.. and the good things is, this is all done without leaving FCP.. so its quick.
    3. If you want to go the whole way and go for a 35mm adaptor.. then do your home work. Do you currently own a select of still lenses? Canon L series or Nikon Pro series? Of course u don’t need the pro lenses, but in this set up the quality of your stills lens becomes really critical! Take a look on YouTube and see the effect these adapter give, they can be quite amazing! Be prepared to spend over £2500 for the adaptor alone!
    4. And of course, remember technique when shooting like this.. these adaptors do stop down your camera, you will probably have less light to play with. When u r tracking etc, DOF is really critical and can be difficult to master at first.
    I don’t have any 35mm adapter, i try to achieve the film look by using steps 1 and 2..the result, well... its ok but often means I have to mess about with camera distances sometimes to achieve a decent DOF. Swings a roundabouts!

  • Newbie macbook cloning question (30 macbooks)

    I am a PC network admin for over 10 years and the school i work for made the decision to go all Mac... so.... Hi.
    We are starting out with about 30 macbooks in a lab environment. Active Directory. All will be using the same network AD name and password.
    I can get them set up fine on my network (glad I crossed that hurddle) but now my question is what the latest, easiest cloning/imaging solution is?
    I don't necessarily HAVE to have a solution that can do more than one at a time, but in a year we will roll out a 1 to 1 so having the ability to clone several at once is a plus.
    I have read about Bombich's NetRestore and CopyCatX but am not really sure how good or current they are.
    My other question is are there any "hardware" solutions? May sound like a dumb question, but like a cart device you can plug all the macbooks in and it clones them? I had heard of something similar for ipad carts but it was just syncing all the apps.
    Thanks in advance and I apologize in advance for my newness

    There are numerous options for creating bootable clones if you prefer not to use Bombich's NetRestore.
    Carbon Copy Cloner
    SuperDuper!
    The Restore option of Disk Utility
    CCC is free to schools and teachers. SuperDuper! is free to use only for full clones. If you want to use other features then you must purchase a license for $25 (I think.)
    It is easy enough to set up the base system you want on one computer then create a disc image of that base system and burn it to a dual-layer DVD that can be used to boot and install on all the other computers.
    You don't actually need a hardware server as you can run OS X Server on any Mac. Once Lion is released the Server software will become available for $30.00 in addition to the $30.00 for Lion. In your case if the computers were purchased on or after June 6th, then you will have 30 days after the release of Lion to get a redemption coupon for a free copy of Lion. The details will be made available on Apple's website once Lion is released.

  • Another simple SQL question?

    Can someone help me (an SQL novice) optimize this query?
    Assume a table TRANS with four columns ACCOUNT, PURCHASE_DATE,
    ITEM_NUMBER, and QUANTITY. (Fairly self evident names, I hope.)
    I want to create a view that returns the most recent purchase
    date for each account, and the sum of all items purchase on that
    date.
    The following works, but involves a sub-query, which I think
    must be inefficient (the real table I'm working with has about
    20 million rows, returning about 1 million rows and takes
    hours!):
    select unique a.account,
    purchase_date,
    sum(quantity)
    from TRANS a,
    (select account,
    max(purchase_date) as cdate
    from TRANS
    group by account) b
    where a.account = b.account and
    a.purchase_date = b.cdate
    group by a.account;
    A second, similar query is to find the most recent purchase
    date, by account, for each item, and the total quantity of that
    item purchased on that date. But, hopefully, an answer to the
    first question will lead me in the right direction.
    Thanks!
    Bob

    Here is another batch of queries to test. The one on top is the
    only one that is drastically different from your query or
    anything that David already suggested.
    SELECT  account,
            purchase_date,
            total
    FROM    (SELECT   account,
                      purchase_date,
                      SUM (quantity) total,
                      RANK () OVER
                           (PARTITION BY account
                            ORDER BY purchase_date DESC)
                      AS rk
             FROM     trans
             GROUP BY account, purchase_date)
    WHERE    rk = 1
    ORDER BY account
    SELECT   a.account,
             a.purchase_date,
             SUM (quantity) total
    FROM     trans a,
             (SELECT   account,
                       MAX (purchase_date) cdate
              FROM     trans
              GROUP BY account) b
    WHERE    a.account = b.account
    AND      a.purchase_date = b.cdate
    GROUP BY a.account, a.purchase_date
    ORDER BY a.account
    SELECT    account,
              purchase_date,
              SUM (quantity) total
    FROM      trans a
    WHERE NOT EXISTS
              (SELECT 0
               FROM   trans b
               WHERE  b.account = a.account
               AND    b.purchase_date > a.purchase_date)
    GROUP BY  account, purchase_date
    ORDER BY  a.account
    SELECT   a.account,
             a.purchase_date,
             SUM (quantity) total
    FROM     trans a
    WHERE    a.purchase_date =
             (SELECT MAX (b.purchase_date)
              FROM   trans b
              WHERE  b.account=a.account)
    GROUP BY a.account, a.purchase_date
    ORDER BY a.account
    SELECT   a.account,
             a.purchase_date,
             SUM (quantity) total
    FROM     trans a
    WHERE    (a.account, a.purchase_date) IN
             (SELECT   b.account,
                       MAX (b.purchase_date)
              FROM     trans b
              GROUP BY b.account)
    GROUP BY a.account, a.purchase_date
    ORDER BY a.account
    SELECT   a.account,
             a.purchase_date,
             SUM (quantity) total
    FROM     trans a
    WHERE    a.purchase_date =
             (SELECT /*+ INDEX_DESC (b my_index) */
                     b.purchase_date
              FROM   trans b
              WHERE  b.account = a.account
              AND    ROWNUM = 1)
    GROUP BY a.account, a.purchase_date
    ORDER BY a.account

  • Another dumb overlay question..

    hi, sorry to bother you all with a redundant overlay file question but ive scoured the forum and still cannot wrap my mind around this process and what i am doing wrong.
    heres what i have done, following step-by-step the lynda.com tutorial:
    1. import a 720x532 still of my menu BG.
    2. i create my overlays, in this case, 3 white stars, next to my 3 menu titles.
    3. i deactivate the visibility of the background, leaving a transparent screen with my 3 white stars.
    4. i save as a tiff, as a copy (no layers). i have tried saving while ticking the "Save transparency" as well as without it.
    5. i import the tiff file into DSP(v.4), set as Overlay File, then drag my button over the first menu title, but no star appears.
    WHAT AM I DOING WRONG I AM LOSING MY MIND AHH!!!
    please help, thanks in advance!
    -brooks

    Go back to your photoshop file, make the three white stars into three black ones instead, on a white background. Export this as a .pict file and use it as the menu overlay.
    In DVDSP, draw out the button rectangles. Set the colours for the buttons to be simple overlay type, and set the normal state to be black and zero opacity. Now set the selected state to be white and full opacity. You can choose another colour for the activated state - try red - and also set this to full opacity.
    What should happen is that the default button will start off with the star and moving from button to button will make the star appear on each as you go.

Maybe you are looking for