Another Registry Missing Problem

I've had the Registry Missing window pop up when iTunes start up. So I've tried the recommended remedies of regedit, updating my burner drivers, uninstalling, re-installing, repair installing. I'd gladly sacrifice a chicken if it would help.
Here's my diagnostic. It says upper filter problem, but when I did that, I got the DISC RECORDING NOT FOUND error.
I'm at my wits end. Help anyone???
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Gateway Gateway 7400 Series
iTunes 7.0.2.16
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: cdrbsdrv (7.5.0.0), Pfc (2.5.0.204), Cdr4_xp (7.5.0.50),
UpperFilters: Cdralw2k (7.5.0.50),
Video Driver: ATI MOBILITY RADEON 9600/9700 Series\ATI MOBILITY RADEON 9600/9700 Series
Found aspi32 running.
IDE\DiskIC25N080ATMR04-0______________________MO4OAD4A, Bus Type ATA, Bus Address [0,0]
IDE\CdRomTSSTcorpCD/DVDW_TS-L532A_______________TI51___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel.
The last failed audio CD burn had error code -128(0xffffff80). It happened on drive on -128(0xffffff80) media at speed 0X.

good-o. i was wondering if there was some weird sort of device filter conflict with the reader that was only showing up when the other filter entries were cleared out. (that doesn't seem to be the case though.)
there is something odd going on with the TSSTcorp drive in the recent diagnostics results that we've generated. typically, a bus type and address should appear at the end of a drive entry.
for example, here's the Lite-On entry from a set of belladonna's diagnostics:
IDE\CdRomLITE-ONDVDRW_LDW-411S__________________FS0F___, Bus Type ATA, Bus Address [0,0]
(you have that bus type/address in the entries done with the other filter entries in place, but not in any of the diagnostics after a filter edit.)
so let's try seeing first if there's an issue with your iTunes install that isn't letting it see those bus addresses.
reboot the PC and try a repair install of iTunes. head into your Add/Remove, select iTunes, click "Change" and then click "Repair".
after the repair install, does itunes still give you the "Disk burner not found" message? does a bus address/type show up next to the TSSTcorp drive if you run diagnostics after the repair install?

Similar Messages

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open. I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank you

Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy

Problem to make new project in visual studio 2012 Ultimate RTM This is often caused by registry permission problems

hi
i Install Visual studio Ultimate 2012 RTM and ..
when i want to create a new project (windows application form C#) give me this error :"Visual Studio does not have permissions to read the template information from the system registry. This is often caused by registry permission problems"
what can i do for this problem ?
how can i solve this ?
Visual studio Ultimate 2012 RTM

This issue is quite wide-spread and it affected older Visual Studio versions. I am disapointed by the amount of junk advice and the lack of proper stance from Microsoft.
The only correct solution I could find was provided by HallCrash on July 01, 2010 in this similar thread:
social.msdn.microsoft.com/Forums/en-US/vbexpress2008prerelease/thread/c273b0e1-7f46-4065-afaf-4edf285d2531
Ironically, that thread is locked and I was not able to give recognition to HallCrash there ...
You'd have to scroll almost to the bottom to find HallCrash's solution. That solution is based on a Microsoft supported tool (SubInACL) which can be downloaded here: microsoft.com/en-us/download/details.aspx?id=23510. It limits the registry changes strictly
to Visual Studio. Nevertheless, start by creating a System Restore Point.
I do not trust and would not recommend using unknown software (such as the Softpedia suggestion) for this.
Cheers

Registry settings problem...upper and lower filters missing!?

Hi there.
I'm experiencing what seems to be a common problem - missing registry files for burning CDs in itunes. The warning dialog box comes up when i load itunes.
I have the current version of itunes.
My driver's firmware is up to date.
I found and then began to follow the matching support instructions for this problem at the following page:
http://support.apple.com/kb/TS2372
when I got to step 11 and the lower filter was missing, I didn't worry too much...but then I went to the next step and found that I don't have the upper filters either!
So now I have to solve this second problem first before I can tackle the first...any help would be very much appreciated.
cheers, justin.

Someone posted this on missing the upper filter entry recently:
http://discussions.apple.com/message.jspa?messageID=8138108#8138108
I haven't tried it myself and be careful if you decide to try it as it involves editing the registry.

Another pdf export problem with graphics missing

well, it seems that there have been quite a few export probs w/pdf.
i created some somewhat complex graphic files (wine labels) using keynote. then transfered them over to pages so that i would be able to print them
more easily. when transfering them to pdf files i lose some graphics.
the graphics that i lose are chinese characters...but only SOME of them.
i've tried pdf/x, still the same problem, but then i have that funny shaded
box around my letters.
i've tried exporting directly from keynote, but the pdf image is markedly
smaller than the oringinal document (with the comments hidden).
any ideas...even the genius bar is stumped.
macbook Mac OS X (10.4.8)

In general, if some Chinese characters behave in one way and some other ones in another, it is often because one uses the wrong kind of font. If you for example have the (simplified) character 话 and use a font for traditional Chinese it may sometimes fail - especially in MS Word.
That said, I cannot reproduce your particular problem here. Both Keynote and Pages seem to handle this as well as they possibly can for me.
Two things you can try:
1. Change font, to make sure that it matches the character.
2. Create another account on your Mac and see if you still have the same problem.
What did the characters look like? Any fancy formatting with shadows or colours?

Another mobileme missing calendar/contacts problem

MobileMe calendars disappear and reappear mysteriously. Sometimes I get "You have no contacts," or "No supported calendars found." Other times I might see one of seven calendars. Tried clearing browser cache, then logging out, then logging back in. Didn't work. I can reproduce the problem with Firefox 3.6, IE 8.0, Safari 4.0 (under Windows 7).
Time to drop my subscription and switch to Google Calendars and Contacts?

I checked with some other tech guys. One said he seen this before but it was due to the whole database being corrupted. That said it could be the data in the database or the database it self. First I would like to try to recover your data. If you go here http://www.pimlicosoftware.com/dbfixit.htm. This is a nice tool to tell you what data is corrupted in your device. This is only for contacts, calendar, tasks, and memos. Nothing else. Also, this will not fix if the database is the issue. Reason is if the data is good but hotsync cannot access the database due to that is the issue.
If that is the issue the only thing we can do is hard reset. So since you can still see your data. Add any of that in to your Mac and hard reset. And resync this way you will not loose that.
Post back if you have any more questions. This link is for install instructions for a Mac on the right side. http://www.pimlicosoftware.com/install-dbfixit.htm
Post relates to: Treo 800w (Sprint)

Yet another temporary freezing problem, energy saving related, maybe

I've followed uncountable suggestions about this issue, but none seem to be quite the same situation, and none of the suggestions I tried made any difference so far.
History: MBP 17" June/2009, 8GB RAM, 500GB Seagate with sudden movement protection, started life as 10.5.7, done at least three fresh reinstalls of SL. The problem was present on the second SL install (the one I really used in production for about a year), but I solved it somehow by following uncountable Google suggestions at the time. Didn't take not of the magic one, because the problem wasn't so predictable at the time, or I didn't know enough about it, and also because I only noticed the problem was gone after a couple of weeks of normal use. Unfortunately, some time ago my filesystem went nuts on a kernel panic and, though I was able to move things back in place from lost+found, a few things wouldn't work as they should, so I went for another fresh reinstall. After I started to use the new system the problem showed up again, but I haven't being able to find a fix for it again. Current system (10.6.4) and patches regularly updated, though I tend to delay a reboot to avoid putting together all my usual windows/applications in the correct desktop/spaces. Maybe the only continuously running extension I have is Growl, since I tend to more heavily use the Unix part of the Mac through MacPorts (latex, tcpdump, nmap, bash scripts, emacs and so on). Recently I installed M$ Office, but normally I prefer OpenOffice (does M$ Office install some sort of extension?)
Frequency: I'm almost sure it is triggered by something related to energy saving regarding turning off the screen, but it doesn't happen every time. When I'm giving a class, the machine runs on battery, the settings for screen off are shorter and if I take too long to generate some input (key press or touchpad action), the problem tends to happen. Interestingly, it's particularly more frequent when I'm giving classes:-):-), but it is happening even on my desk with power on. I'm inclined to think there's a "window of opportunity" for the bug to happen, maybe between screen dim and screen off (a few minutes?). My settings are currently at 15 minutes for the screen to go off, for both power adaptor and battery operation, but that's an attempt to lower the chances of this happening during class, which is terrible. They used to be at only a few minutes of inactivity.
Symptoms: if I try to do anything with the machine past some period of inactivity, maybe during that window I mentioned above, there's a high chance of the bug being triggered. The system responds quickly to clicking a window, but applications don't seem to receive the focus of attention; I notice that the window frame of an application doesn't get darker when I try to select it. On a Terminal, the prompt remains as a rectangular frame instead of a filled block (I use white characters on dark background), and no matter how much I try, I cannot give the focus of attention to the visible shell on Terminal, so I can't issue any shell command to try and find out things. Changing workspaces may happen, but at a very slow speed, maybe many seconds after issueing the command. Eventually the system recovers itself, usually after several minutes, and then all user interface events that I tried during the freeze were remembered and are played sequently as fast as the machine can handle, sometimes doing unwanted things in the process due to objects receiving the wrong action (some sort of desynchronization). The outstanding event that preceeds recovering is the screen being progressively blackened and then lit again, but not instantly as in moving the pointer to a hot corner. The screen transition happens during half to a full second, after which all queued events are played at the fastest possible speed. After that the system is completely normal. In the beginning I have hard-rebooted the machine, because I didn't know it would eventually recover itself. During class I also don't have the patience to wait for long (and neither do students:-)).
Solutions already tried:
- disabling sms through pmset. I know it has to be disabled with this particular drive, otherwise conflicts with the drive's own mechanism. It is currently off, and had been on for a while till I refound the suggestion through google.
- re-indexing Spotlight's DB. No change.
- fixing file permissions (I don't see any possible relation, but anyway...)
Don't recall what else is missing on this list, because I couldn't find a concrete suggestion for this scenario, so I believe that's about it.
It looks to be more frequent now, to the point that I decided to stop work just to write this long msg, in the hope that someone else may have seen such behaviour and have something new for me to try.
Thanks in advance.

The problem is that the initial backup is incredibly slow and hasn't worked yet. I right click on the dock icon and start the backup process which after working out what needs to be copied progress's in very slow erratic bursts.
It's hard to offer a definite solution. But there are some simple things you could try to improve the backup speed such as excluding TM backup disk from spotlight indexing (privacy tab in spotlight prefs), and excluding unecessary files and folder from the backup (e.g. applications) in TM prefs.

Another "duplicate email" problem.

I asked the following question over on the Office 2013 forum and the only response I got basically told me to "go ask this on the Outlook forum", so here goes:
"I too am experiencing rabid email duplication with Outlook 2013. I've found a way to avoid the problem, and also a way to fairly reliably CAUSE it. I'm posting in the hope that this will help Microsoft with information that will allow them
to correct their buggy code.
My configuration:
LAN/Domain network running Server 2008 R2 and a 3rd party (not Microsoft) email server. (Code-Crafters Ability Mail Server).
Physical network is a mix of hard-wired Gigabit Cat6 and wireless (Ubiquiti Pico M2 HP).
A mix of Windows workstations, desktops and laptops running a mix of XP-Pro, Vista Ultimate, Win 7 Pro, and 8.1 Pro.
A mix of Outlook versions, the XP and Vista machines are mostly running Outlook 2003 (yeah, I know, it's ancient but it generally still works fine for these users and they hate change). The 7 and 8.1 users are all on Outlooks 2013 (installed as Office
2013 Professional Plus 2013).
All of the users access their email on the OEM Ability server via IMAP. All users have at least "a couple" of sub-folders defined in their account and all use at least "some" Outlook rules to route some email at both receive and send
time into various folders. Some users have a lot of rules and folders, some have only a small handful. These users also have external IMAP access to their email on the server via their Android phones, generally using the "Type" (formerly
Bluemail) Android email client.
Everything from the server down (including the email server and the domain controller) is mine and under my direct control.
What happens fairly consistently for a few users is this:
If they have Outlook 2013 running on more than one workstation at the same time, eventually it will go insane duplicating a handful of emails, both in the inbox and in one or more of their folders, at the rate of once every few seconds. They are also
connected via their android phone when this happens. All clients (all the Outlook instances and their phones) go nuts trying to send 'new mail' notifications out at a very rapid rate. It's not possible to delete them fast enough to keep up, no
matter how quick they are on the trigger. The emails in question ARE in fact duplicates - everything about them including the header information matches - and they are "real" (the duplicate copies are also visible through the web interface
directly into the email server), so I'm sure the duplication is not just inside the Outlook view of the user's email folder(s).
Stopping all of the user's instances of Outlook stops the duplication. Stopping just the android client does not. If the user shuts down all his/her instances of Outlook and uses the webmail interface to delete all the duplicates (even the 'original'
email) and then starts exactly ONE instance of Outlook 2013, things are fine. Starting a second instance of Outlook 2013 on another machine (for the same user) will eventually cause the duplication to start again. Sometimes immediately, sometimes
not, but in my experience it has always started again within an hour of starting the second Outlook 2013 instance. When it starts, the duplicated mail is the same as before - even though the user previously deleted all copies of it, they 'magically'
start re-appearing.
I'd really like for this to get fixed. Now, before anyone replies, if you're going to just write "you shouldn't run multiple instances of Outlook for the same account from different machines", don't. I don't want to hear
it and the reasons that some of my users want to do this are none of your concern. If it's DOCUMENTED in official Microsoft documentation that this is not a supported action, then I want to see the reference myself. Otherwise, keep it to yourself
- thanks.
Also, don't suggest that I delete and rebuild the user's email profiles and/or email accounts on the server. Been there, done that (multiple times), it doesn't solve the problem.
Dont' suggest that I ditch my existing email server and convert to something else (like Exchange). I happen to like my existing email server (and so do my users). I've already worked this problem with their support structure fairly extensively and
we're both satisfied that the problem is not being caused by their server code.
Finally, don't tell me to run scanpst. Also been there, done that (multiple times) and that too does not fix the problem, so either the problem is somewhere other than in a corrupted pst/ost file, or scanpst is too dumb to find and correct whatever
corruption might exist.
Having said all that, any insights into what's going on?"
Another symptom, which may or may not be related that I'm seeing on one of the problem machines is that Outlook "sometimes" does not show recent email on the user's account. The user can access his email account via direct web access into
the email server and is able to see, sometimes, several days worth of email traffic that does not appear in Outlook (again, using an IMAP connection). Trying various combinations of "send/receive" operations, "folder unsubscribe/subscribe"
operations, even exiting and restarting Outlook all seem to complete with no errors, but also without retrieving the missing email from the server. Sometimes "time goes by" and the user can restart Outlook and the email will appear, but
I've not yet found a way to make it happen.

Update:
I've reading around the different posts and saw somewhere that it might help if i put my username and password in the outgoing mail section (where is says optional). I did that! I then shut off my wifi and tried to send mail using the edge network and it was sent successfully. I will try this when im away from home again. Hopefully this will work.

Registry settings problem

When I open itunes, itunes warns that registry settings used by itunes for importing and burning CDs and DVD are missing. Itunes recommends reinstalling to fix this problem. After multiple reinstallments, problem is not fixed. Any way to fix? Any way to find and input these registry settings directly?

Someone posted this on missing the upper filter entry recently:
http://discussions.apple.com/message.jspa?messageID=8138108#8138108
I haven't tried it myself and be careful if you decide to try it as it involves editing the registry.

Another RMAN duplicate problem - RAC database to single instance

Hi,
I have a problem with the RMAN duplicate procedure and was hoping someone can help.
I would like to create a duplicate of our production RAC database on a separate, stand-alone, database server on another site. This duplicate will be used for intensive querying by another business unit who I don't want to have access to our production database.
My procedure goes like this:
1. Create a disk (not ASM) based backup of the datafiles and any archived redo logs:
"run {
allocate channel d1 type disk;
backup format '/u02/stage/df_t%t_s%s_p%p' database plus archivelog delete input;
release channel d1;
2. Tar and scp these files to the same location on the stand-alone database server.
3. In the meantime, work has been happening on the production database and further archived redo logs have been generated. I don't really care about these logs for the purposes of the duplicate however, I just want to duplicate to the point of the recent backup. To do this, I run the following SQL to determine the sequence number that I should be duplicating up to:
"select max(sequence#), thread# from v$archived_log where deleted='YES' group by thread#;"
4. Duplicate the production database to the stand-alone database (all the SQL Net stuff is working).
"run {
set until sequence (value returned by above SQL statement);
duplicate target database to XXX;
However, my problem arises because I don't know how to handle the fact that there are two threads. I understand that each thread relates to one of the RAC instances, I just don't know which one to specify for the duplicate. We have a database service which the client application connects through, and that service runs on on or other of the instances. Should I just care about the logs from the instance where the service is currently running?
Am I even approaching this is the correct way?
I look forward to any help that people may be able to offer.
Regards,
Phil

Hi Werner,
Thanks again for your help, there is still something wrong though. "list backup of archivelog all;" shows:
BS Key Size Device Type Elapsed Time Completion Time
3784 202.34M DISK 00:00:08 28-OCT-09
BP Key: 3784 Status: AVAILABLE Compressed: NO Tag: TAG20091028T111718
Piece Name: /u02/stage/df_t701435838_s3820_p1
List of Archived Logs in backup set 3784
Thrd Seq Low SCN Low Time Next SCN Next Time
1 9746 569095777 28-OCT-09 569150229 28-OCT-09
1 9747 569150229 28-OCT-09 569187892 28-OCT-09
1 9748 569187892 28-OCT-09 569231956 28-OCT-09
1 9749 569231956 28-OCT-09 569259816 28-OCT-09
2 7931 569095774 28-OCT-09 569187902 28-OCT-09
2 7932 569187902 28-OCT-09 569259814 28-OCT-09
BS Key Size Device Type Elapsed Time Completion Time
3787 1.04M DISK 00:00:02 28-OCT-09
BP Key: 3787 Status: AVAILABLE Compressed: NO Tag: TAG20091028T112222
Piece Name: /u02/stage/df_t701436142_s3823_p1
List of Archived Logs in backup set 3787
Thrd Seq Low SCN Low Time Next SCN Next Time
1 9750 569259816 28-OCT-09 569261110 28-OCT-09
2 7933 569259814 28-OCT-09 569261108 28-OCT-09
You can see that the highest sequence number is 9750 of thread 1, and that the Low and Next SCNs are 569259816 and 56926111. However, when I look at the output of the RMAN duplicate command:
contents of Memory Script:
set until scn 569505448;
recover
clone database
delete archivelog
executing Memory Script
executing command: SET until clause
Starting recover at 28-OCT-09
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: sid=39 devtype=DISK
starting media recovery
Oracle Error:
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 4 needs more recovery to be consistent
ORA-01110: data file 4: '/u02/sca-standby/data/users.260.623418479'
RMAN-03002: failure of Duplicate Db command at 10/28/2009 16:12:55
RMAN-03015: error occurred in stored script Memory Script
RMAN-06053: unable to perform media recovery because of missing log
RMAN-06025: no backup of log thread 2 seq 7936 lowscn 569411744 found to restore
RMAN-06025: no backup of log thread 2 seq 7935 lowscn 569321987 found to restore
RMAN-06025: no backup of log thread 2 seq 7934 lowscn 569261108 found to restore
RMAN-06025: no backup of log thread 1 seq 9758 lowscn 569471890 found to restore
RMAN-06025: no backup of log thread 1 seq 9757 lowscn 569440076 found to restore
RMAN-06025: no backup of log thread 1 seq 9756 lowscn 569411439 found to restore
RMAN-06025: no backup of log thread 1 seq 9755 lowscn 569378529 found to restore
RMAN-06025: no backup of log thread 1 seq 9754 lowscn 569358970 found to restore
RMAN-06025: no backup of log thread 1 seq 9753 lowscn 569321882 found to restore
RMAN-06025: no backup of log thread 1 seq 9752 lowscn 569284238 found to restore
RMAN-06025: no backup of log thread 1 seq 9751 lowscn 569261110 found to restore
you can see that something is setting the recovery SCN to 569505448 which higher even then any of the archived logs mentioned above. If I select current_scn from the production database, this gives me 569528258 which is closer to the value which RMAN is expecting to recover to than any of the archived redo logs.
Can you think what might be causing RMAN to try to recover to this value? and why does it appear to be ignoring the SET UNTIL SEQUENCE command?
Cheers,
Phil

Mandatory attribute property missing problem

Hi All,
I tried to do the simple display output, but it can't work.
My code is as below;
<HTML>
<BODY bgColor="#c8d8f8>
<form action="webapps\ROOT\form.jsp" method=POST>
<center>
<table cellpadding=4 cellspacing=2 border=0>
<th bgco;or="#CCCCFF" colspan=2>
User Registration
</th>
<tr>
<td valign=top>
First Name
 
<input type="text" name="LName" size=15"></td>
<td valign=top>
Full Name
 
<input type="text" name="FName" size=15"></td>
</tr>
<tr>
<td valign=top>
Password
 
<input type="text" name="Passwd" size=15"></td>
<td valign=top>
Telephone
 
<input type="text" name="Tel" size=15"></td>
</tr>
<tr>
<td valign=top>
Password
 
<input type="text" name="Passwd" size=15"></td>
<td valign=top>
Telephone
 
<input type="text" name="Tel" size=15"></td>
</tr>
<tr>
<td valign=top>
Titile
 
<input type="text" name="Title" size=15"></td>
<td valign=top>
Department
 
<input type="text" name="Dept" size=15"></td>
</tr>
<tr>
<td valign=top>
Email
 
<input type="text" name="Email" size=15"></td>
<td valign=top>
Access
 
<input type="text" name="Accesstype" size=15"></td>
</tr>
<%-- Create the bean only when the form is posted --%>
<%
if (request.getMethod().equals("POST")) {
%>
<jsp:useBean id="formHandler" class="com.jguru.FormBean">
<jsp:setProperty name="formHandler" property="*"/>
</jsp:useBean>

<hr>

You submitted : 
Login Name: 
<jsp:getProperty name="formHandler" pripoerty="LName"/> 
Full Name: 
<jsp:getProperty name="formHandler" property="FName"/> 
Password: 
<jsp:getProperty name="formHandler" property="Passwd">/> 
Telephone: 
<jsp:getProperty name="formHandler" property="Tel">/> 
Title: 
<jsp:getProperty name="formHandler" property="Title">/> 
Department: 
<jsp:getProperty name="formHandler" property="Dept">/> 
Email: 
<jsp:getProperty name="formHandler" property="Email">/> 
Access: 
<jsp:getProperty name="formHandler" property="Accesstype">/> 
<%
%>

</body>
</html>
The error message is
Internal Servlet error
org.apache.jasper.compiler.ParseException: getProperty:Mandatory attribute property missing
Thanks in advance for any assistance.

Nick,
Thanks for your help.
But I also face another problem that is
"unable to load class com.jguru.FormBean" when I tried to call another jsp.
Here are my code :
package com.jguru;
public class FormBean {
private String LName;
private String FName;
private String Passwd;
private String Tel;
private String Title;
private String Dept;
private String Email;
private String Accesstype;
public FormBean() {
LName="";
FName="";
Passwd="";
Tel="";
Title="";
Dept="";
Email="";
Accesstype="";
public String getLName() {
return LName;
public String getFName() {
return FName;
public String getPasswd() {
return Passwd;
public String getTel() {
return Tel;
public String getTitle() {
return Title;
public String getDept() {
return Dept;
public String getEmail() {
return Email;
public String getAccesstype() {
return Accesstype;
public void setLName(String x) {
LName = x;
public void setFName(String x) {
FName = x;
public void setPasswd(String x) {
Passwd = x;
public void setTel(String x) {
Tel = x;
public void setTitle(String x) {
Title = x;
public void setDept(String x) {
Dept = x;
public void setEmail(String x) {
Email = x;
public void setAccesstype(String x) {
Accesstype = x;
Thanks.

Another BORIS MISSING thread.

Hi,
I've been looking at several BORIS MISSING threads trying to find a solution, and have not found a good one yet. Here is my problem:
Originally purchased FCP studio 5.0 in 2005. Noticed Boris was missing (never needed it) about a year ago and never figured out how to get it back (didn't try very hard). Upgraded to 5.1.4 about two weeks ago, and it's still missing. Trashing preferences doesn't help.
The specifics:
Boris does not show up under generators in effects tab or in viewer generators popup.
BorisFX folder is in Application Support as it should be, and all necessary files (as mentioned in other threads) seem to be in place. What's more, if I create another account, BORIS WORKS. But I don't want to login to another account every time I want to use Boris.
Something I've noticed: I seem to recall that Boris file icons in Application Support>BorisFX were some sort of "Kind: After Effects" Icons prior to my 5.1.4 install (also prior to my recent purchase of Photoshop). Now they are either "Kind: Unix Executable File" or (under BorisFX>Gradient Styles) "Kind: Adobe Photoshop Gradient File". Would this have anything to do with my problem? Anyone have any ideas for me?
Thanks,
Matt

1. Open your system Plugins folder (not your own FCP User Data folder):
Macintosh Hard Drive/Library/Applications Support/Final Cut Pro System Support/Plugins
2. Copy these folders to the desktop:
Text Scrambler.bundle
Title 3D.bundle
Title Crawl.bundle
Vector Shape.bundle
3. Change the extensions on all four desktop files from bundle to .plugin
This requires password authentication. They will become blank icons.
4. Delete the original .bundle folders from the Plugins folder
7. Move the desktop .plugin files to the Plugins folder
8. Launch FCP and they should now show up under the "Boris"
generators category

Another import Mail problem (Panther to Tiger)

OK, I have 15 email accounts in my Mail, that worked fine, albeit slowly, in Panther (10.3.9).
I just imported everything to a new macbook (10.4.8), and now some of the email accounts are not functioning properly. I get the misleading error message: The message from XXX <[email protected]> concerning “RE: YYY” has not been downloaded from the server. You need to take this account online in order to download it."
I have not taken the new macbook's mail account online.
I have read through dozens of posts here over the past few days, and am disappointed Apple hasn't fixed the import problem from over a year ago.
Anyway, I got both the "old" Panther Mail working, and new Macbook Tiger Mail not working, so willing to "experiement" if anyone wants me to. I have seen various theories on what works and what doesn't. Some of my mailboxes are large, so I suspect that's part of the problem. In addition they were previously imported from Jaguar, and probably from original OSX 10.1, so probably contain some of the vestigial files. I suspect I need to do the fixes/cleanup in 10.3.9, then re-import them...
I also don't rebuild mailboxes because once I did it I lost all my mail (or appeared to), but I was able to recover from backup. I suspect the mbox file was probably still there, so mail was recoverable, but that experience was not one that instilled confidence in me. I'm willing do rebuild this time...
Some info on the 15 accounts I tried to transfer:
1. dan@dc OK, 5271 messages, 152 MB
2. info@pics OK, 54 messages, 315 kB
3. trav IMAP, empty, (probably due to not going online after xfer)
4. web@al OK 3 messages, 2.9 kB
5. web@kais OK, 147 messages, 802 kB
6. class * BAD * 238 messages, 854 kB (160 msg xferred)
7. web@khs OK, 1248 messages, 27.8 MB
8. dan@aa * BAD * 10419 messages, 607 MB (638 msg xferred,)
9. cabin OK, 10245 messages, 39.6 MB
10. news OK, 2712 messages, 4.2 MB
11. web@aa OK, 97 messages, 1011 kB
12. dan1 OK, 2945 messages, 11.7 MB
13. info@dc * BAD * 2023 messages, 50.6 MB (22 msg xferred)
14. dc@dc OK, 895 messages, 14.4 MB
15. info@aa OK, 2484 messages, 39.7 MB
The accounts I use most often are 1, 8, 13, 14, 15.
Frankly, I'm surprised account 6 went bad, due to small size, and last saved received email over a year old. No recent mail received.
All SENT Mailboxes appear to be fine.
I have several archive mailboxes, and they all seem fine, too.
I will do (in Tiger) the standard POP procedure posted multiple times by David Gimeno, unless someone thinks I should be doing the cleanup in Panther first...then re-import, or wants me to be a Guinea Pig and run some "tests"
Another minor thing: Mail in Panther shows how large the file is and the number of messages (below toolbar), while Tiger only shows number of messages (and unread). Any easy way to enable showing how large the mailbox is? I think it should be displayed, especially if Mail chokes on large files.
Also, is there a better, easier to use, less clunky Mail alternative that can handle multiple accounts? Entourage? Eudora? T-bird?
Aloha,
Dan

The real issue here is that the conversion from Mail 1.x to Mail 2.x is broken and it may fail miserably even for mailboxes that Mail 1.x could handle without a hitch. Hence, trying to “fix” any problems you might have in Mail 1.x by upgrading to Mac OS X 10.4 is guaranteed to fail and can only make things worse.
At this point, whether you go back to Mac OS X 10.3 and tidy up your mailboxes there (if that’s still an option), or want to try to fix the problem in place using the procedure I’ll post below again for reference, is up to you. Do what you find easier or more convenient. Whatever you do, be sure you keep a backup of the original ~/Library/Mail folder, so that you can try something else if things don’t work as expected.
And yes, in their infinite wisdom, the powers that be at Apple also decided to remove the status bar from Mail 2.x, and there is currently no way to know the size of a locally stored mailbox in Mail 2.x other than by switching to the Finder and checking the size of the Messages folder within the corresponding *.mbox folder in ~/Library/Mail/.
Before proceeding any further, however, you should verify/repair the disk (not just permissions), as described in the following article, in case there is something amiss in the filesystem that also has a bearing on the problems you’ve experienced:
The Repair functions of Disk Utility: what's it all about?
For a POP account, the following procedure should allow you to fix the Inbox problem. A similar procedure should allow you to fix other mailboxes that might also be affected:
1. Quit Mail if it’s running.
2. Make a backup copy of the ~/Library/Mail folder, just in case something goes wrong while trying to fix the problem. You can do this in the Finder by dragging the folder to the Desktop while holding the Option (Alt) key down, for example. This is where all your mail is stored.
3. Create a new folder on the Desktop and name it however you wish (e.g. Inbox Old). It doesn’t need to have an .mbox extension.
4. In the Finder, go to ~/Library/Mail/POP-username@mailserver/INBOX.mbox/.
5. Move the files mbox and Incoming_Mail out of INBOX.mbox, into the Inbox Old folder just created on the Desktop. These files contain all the messages that were in the mailbox before the upgrade to Tiger, and maybe even some messages that had been deleted. mbox is the most important. Incoming_Mail may or may not be present.
6. Move any strangely-named Messages-T0x... folders to the Desktop (not into the Inbox Old folder). These folders are to be deleted after fixing the problem. They are temporary folders created during an import or an indexing process, and Mail should have deleted them when done. Their presence is a clear indication that something didn’t work as expected. If you’ve been using Mail after the conversion and have already tried to fix the problem by rebuilding the mailbox or something like that, they might contain messages that are neither in Messages proper nor in the mbox file, so keep them around until the problem is fixed.
7. Move everything else within INBOX.mbox, except the Messages folder, to the Trash.
The result of the above should be that INBOX.mbox contains the proper Messages folder only, and the Inbox Old folder on the Desktop contains the mbox and Incoming_Mail (if it exists) files only. Now, proceed as follows:
8. Open Mail.
9. The account’s Inbox should properly display in Mail as many messages as *.emlx files are in ~/Library/Mail/POP-username@mailserver/INBOX.mbox/Messages/. If that’s not the case, select the mailbox in Mail and do Mailbox > Rebuild.
10. In Mail, do File > Import Mailboxes, choose Other as the data format, and follow the instructions to import the Inbox Old folder that’s on the Desktop.
As a result of doing the above, some messages may be duplicated now. Andreas Amann’s Mail Scripts has a Remove Duplicates script that you may find useful.
Do with the imported mail whatever you wish. You may move the messages anywhere you want and get rid of the imported mailboxes afterwards.
If all is well and you don’t miss anything, the files on the Desktop can be deleted, although you may want to keep them for a while, just in case.
Take a look at the following article to learn what you might have done before upgrading to minimize the risk of this happening, and what you may do after fixing the problem to avoid similar issues from happening in the future. DON’T do now what the article suggests, though, as that would make things worse in the current situation:
Overstuffed mailbox is unexpectedly empty
Ask for any clarifications or if you need further assistance.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. That is, ~/Library is the Library folder within the user’s home folder, i.e. /Users/username/Library.

Possible solution to iTunes registry permission problem (Vista)

My problem seems to closely mirror many of the ones I've been reading about here and elsewhere on other forums. And at least one person had the same exact problem when I tried to update, install, or even uninstall iTunes 7.6
I kept getting an error that the registry key HKLM\Software\Classes\Interface{915DA835....blahblah} could not be opened, access denied etc. -- even though I was logged on as Admin and I tried running the iTunes package as Administrator.
I tried modifying the permissions for that key. No dice.
I tried a complete uninstall and registry dump of iTunes and QT-related keys -- I even used MS Windows Installer Utility. That didn't work. Moreover, when I tried to reinstall, I was locked out of other subkeys as well.
Then I was searching around MS's support forums and found this thread:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1423928&SiteID=1
There are detailed instructions (but not too complicated) to restore admin permission to the entire registry. I performed the first two steps of the instructions, and it worked fine.
1) Specifically, I downloaded and ran the utility software
2) Then created the .bat file using NotePad, pasted the command instructions and and saved the file
3) Created a System Restore Point and backed up my registry
4) Rebooted in safe mode with command prompt. I don't know if the safe mode reboot was necessary, but I wanted to make absolutely sure. (Note: the instructions say to "run from the elevated command prompt", which means running Command Prompt as Admin; I decided to use Safe Mode instead)
5) I ran the program +(remember where you save it!)+
c:\[dir where you saved it]>fixregistrypermissions.bat
-- it took a few minutes to run completely, restoring permission to all but but 4 registry keys, for some reason.
6) I restarted Vista normally (oddly, my system started running REAL SLOW; having just done all this last night, I'm not sure if this is now a new problem)
7) Made another System Restore Point, to be safe
8) _Uninstalled completely_ the remnants of iTunes and QT -- including Apple Mobile Device Support, Apple Software Update, Bonjour
9) Made another System Restore Point
10) Rebooted
11) Dumped any app data and folders related to iTunes (deleted AND empty recycle bin); I was not able to remove the Bonjour folder
12) Rebooted
13) Installed iTunes package (run as Administrator); I even ran it in XP Compatibility Mode, which resulted in a prompt that the program is supposed to run in Vista. OK, whatever.
14) Rebooted
15) Launched iTunes, launched QT. Worked fine.
16) Plugged in my Nano and iTunes and iTunes recognized it, no problem.
Hope this works for the rest of you...
PS: I forgot to mention that successfully reinstalled iTunes using the full software package download available at http://apple.com/downloads
I also disabled the automatic updates, which was how my problem started in the first place!

Try modifying the extension.
kwadz wrote:
Were you guys having problems with any other Windows apps touching the registry, too? I'm having a ton of these problems, mostly where my apps won't retain reg saved information like settings, etc. iTunes is the first place I noticed it, though. I also can't boot into Vista's safe mode without getting a crcdisk.sys error. Running the msft application to edit reg perms didn't help me as many of them failed.
Any ideas?
No problems that I can tell, though I came back to this thread to remind me how to fix it because iTunes started acting up again. <grr!>
But if you've tinkered with the registry before, that could cause a lot of problems. I would check with Microsoft about the "crcdisk.sys" error. Sorry, buy I don't know what that is.
As far as having to fix it this time around, good thing I still had the .bat file on my computer. I ran it again, tried "repair" of iTunes in the Control Panel instead of the laborious process of uninstall/reinstall. I have to reboot to see if that worked. :fingers crossed:

Another CN001 Connectivity Problem

Have noticed a few posts over the years on this subject, and I am suffering yet again with it.
Manage to watch a few minutes on my iPad, then the dreaded CN001 messsage. Only solution is to come out of BT Sport and log in again to get another few minutes of viewing. Haver managed to miss all of the goals in the first half of today's game, and missed all but on on the Conference game yesterday with the same problem.
I have deleted and re-uploaded the BT Sport App, but this makes no difference.
It's really becoming a joke now - I resigned up with BT to get BT Sport, but I seem to be able to watch is less than ever.
What the heck is going on with BT???????

Hi tonymc,
That error message usually means you're not connected to the internet.
Are you connected to your Hub's wifi at home when you have this problem or are you out and about using a mobile data connection?
Post back and we'll take it from there.
Robbie
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Another Registry Missing Problem

Similar Messages

Maybe you are looking for