Any FM or idea to remove # which get printed after every charin al11file

Hi all,
when a file gets saved from tcode FBWE in al11, # will be displayed after every character like,
#1# # #0# #3#4....and when i read it into table it comes along with hash....but i want data with out it.
Any FM to remove the # symbol from the actual number (1 0 34. ...above example)
Any pointer for above would be really helpul..
Thank you..

Hi dinesh,
No need for FM just use Replace as follows;
1) For Single Field
REPLACE ALL OCCURRENCES OF '#' IN lv_text WITH ''.
2) For a whole internal table
REPLACE ALL OCCURRENCES OF '#' IN TABLE itab WITH ''.
Revert Back if u have any doubts.
Regards
Karthik D

Similar Messages

Suddenly I have problems moving files to the trash... get a dialog saying Finder wants to make changes and I must provide the password... Any explanation or ideas how I can get this to stop?

Suddenly I have problems moving files to the trash... get a dialog saying Finder wants to make changes and I must provide the password... Any explanation or ideas how I can get this to stop?

Please take these steps if you're prompted for a password when moving items in your home folder to the Trash.
1. Triple-click anywhere in the line below on this page to select it:
~/.Trash
2. Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu.* An Info dialog should open.
3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
4. In the General section, uncheck the box marked Locked if it's checked.
5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
6. Close the Info window and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

About Resource Object which get created after careting GTC flat file conn.

Hi,
I have one query:
Whenever we create GTC for flat file reconciilation it creates new RO & new Process definition etc.
So in this case in OIM there are two ROs one for Proviioning process and another which get created after we create GTC for reconciilation.
But I don't want two seperate RO for single resource.
what we can do?

Hi
I'm using single host implementation OWB10g/Oracle on same host.
My flat file location is
c:\source\dept.txt
Pl tell me if I have to save the same file on any particular location for OWB to read.
Implementation in OWB10g
1. Created Flat File module, selected Connector & Location Details.
2. Done mapping for source file & target table.
3. Validated & Generated the mappings.
4. Deployed the mapping in Deployment Manager.
5. Following was Error Message after execution of the mapping.
Can not read data from file
c:\souredept.txt
OPTIONS ( ERRORS=50, BINDSIZE=50000, ROWS=200, READSIZE=65536)
LOAD DATA
CHARACTERSET WE8MSWIN1252
INFILE '{{TEXT_DATA_LOCATION.RootPath}}dept.txt'
BADFILE '{{TEXT_DATA_LOCATION.RootPath}}dept.bad'
DISCARDFILE '{{TEXT_DATA_LOCATION.RootPath}}dept.discard'
INTO TABLE "{{TARGET_LOCATION.Schema}}"."DEPT"
APPEND
REENABLE DISABLED_CONSTRAINTS
FIELDS
TERMINATED BY ','
OPTIONALLY ENCLOSED BY '"'
"DEPTNO" POSITION (1) INTEGER EXTERNAL ,
"DNAME" CHAR ,
"LOC" CHAR
Thx in advance

Functional module which get triggered after posting of the document F-22

Hi,
I am posting the documents using the transaction F-22. I need to update some table after the documet will get post.
I try to find out the BTE'S in the transaction FIBF but unable to find it out.
Can anyone help me to find out the relvant functional module which will get triggered after the posting of the documents.
Please help me with this.
Thanks in advanced.
Regards,
Darshana

Hi Harini,
It is also not get triggered while i am posting the documents.
Can you please suggest me some more functional modules.
Thanks in advanced.
Regards,
Darshana

I'm using Windows XP2. Can't open my "iTunes Store" page. Have to struggle to get to my library. Have uninstalled/reinstalled multiple times. Cleared associate apps in Add/Remove. Re-booted after every operation. No change. Still opens in library.

I'm using a Windows XP (32 Bit). I can't open my "iTunes Store" page. I have to struggle just to open the iTunes icon. When I do, it opens directly to my music library. When I try to click to the iTunes Store, it opens to a blank page with the words "iTunes Store" embossed in gray in the middle of the page. That's it! NO GRAPHICS! I even tired the "Diagnostics" test. It shows that there is a disconnect with the internet and the iTunes Store. When I clicked the "Help" button next to it, it opened to a totally blank page. Nothing. I'm trying to sync an iPad 2 to iTunes on that computer. It shows on the computer that the apps have been synced, but they are not present on the iPad. Just as a note: the apps and info in the account has been loaded on the computer via 3Gs and then a 4S phone. Thank you for any and all help in this matter.

Hi Andre V.,
When having iTunes Store connectivity issues, the following articles provide the best solutions:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Thanks,
Matt M.

EWM with QM -Inspection label not getting printed after usage decision

Hi Experts,
We checked configuration settings related to this but we could not find missing configuration. Right now we are not able to print label after we take usage decision. Please let us know your inputs on this.
We are using /SCWM/QINSP for usage decision.
Thanks & Regards,
Prashant

We changed the printer name in condition record and we could print the label.
Regards,
Prashant

Smartform: Blank page gets Printed

Hi All,
in my smart form i have two pages, Second page contains main window.
i have restricted my first page with some conditions , so that first page data will not be printed.
if i execute the smartform first page is printed blank without any data.
is there any option to avoid the blank page getting printed????
Regards,
Dinesh R

Hi Dinesh,
One reason for getting a blank page is if the windows are overlapped in the page layout. Please check and see if any window is overlapping.
Else, check for "page break" . This is a check box . Once this is activated for a text or window or page, it directs you to a new page. Probably this might be the problem.
Hope this helps.
Thanks,
Prisford Pereira.

User getting Locked after 1 day

Hi All,
I am facing an issue...a particular user in our SAP ECC 5.0 system is getting locked after every one day, I checked the configuration in SU01 but everything seems to be fine there.
Please help regarding this issue.
Thanks in Advance
Regards,
Prashant.

Dear Prashant,
Have you activated user trace.If yes then monitor that user ID.It wont be possible that only 1 particular user is getting locked (correct me if I am wrong).There can be a possibility that somebody is deliberately entering wrong password for his ID any other terminal.
If you have activated user trace then you can easily monitor that user ID and even the terminals from where his ID has been accessed.
PS: I might be wrong,so please update me with the latest.
Regards,
Ashutosh

Hello! Lightroom is asking for serial number, which I don't have, despite just buying the Cloud? Any ideas how I can get it to work?

Hello! Lightroom is asking for serial number, which I don't have, despite just buying the Cloud? I had a trial version of LR, downloaded the Cloud, every other program works, including trials, but Lightroom does not. Any ideas how I can get it to work?

Creative Cloud applications ask for serial number

When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly. Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal. In mixed mode it works fine. Any ideas on how to get 5.0 working?

When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly. Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal. In mixed mode it works fine both placed. Any ideas on how to get 5.0 working? I thought 5.0Ghz was supposed to have a wider range. Do I need to change a setting on the Macbook Pro?
Thanks, W

I'm not sure if you understand that 5 GHz has some upsides, but also some very significant downsides.
The upside is that the 5 GHz signal will allow faster speeds.
The downside is that you must always give up something in order to gain something else.Unfortunately, the marketing hype about 5 GHz does not go into very many details about this.
In the case of 5 GHz, the 5 GHz signals are much weaker than 2.4 GHz signals, so they do not travel as far or penetrate any obstructions like walls or ceilings nearly as well as 2.4 GHz signals. In many cases, in order to get good 5 Ghz performance, you literally have to have almost a line-of-sight relationship between your computer and the wireless router.
If you have a new dual band router, which broadcasts both a 2.4 GHz and 5 GHz signal simutaneously, your Mac will connect to the best signal quality automatically depending on its location in relation to the router. In the same room, without any obstructions, it will connec to 5 GHz. But, take the laptop down the hall a few rooms and around the corner and the Mac will connect to the 2.4 GHz signal because at that location, the 2.4 GHz signal is not only stronger, it is also faster.

I spilled water on my laptop and my "i", "j" and "k" letters don't work on my laptop. However my main problem is that my password contains an "i" so i am locked out of my computer. Any ideas how I can get around the password and login.

I spilled water on my laptop and my "i", "j" and "k" letters don't work on my laptop. However my main problem is that my password contains an "i" so i am locked out of my computer. Any ideas how I can get around the password and login. I tried the method where you go into single user mode and type in commands, however that method uses some of the letters that are not working on my laptop.

You didn't mention which version of OS X your running but there are password reset utilities provided OS X: Changing or resetting an account password (Snow Leopard and earlier) - Apple Support or OS X: Changing or resetting an account password - Apple Support
Alternately you can use an external keyboard to log in and change the password. Make a backup if you don't have one, it's likely that your problems aren't over. If that water continues to migrate downward and fries the logic board your macbook will be toast.

TS1814 I have an iPhone 3GS and was trying to restore it. Now it won't let me activate my phone and my itunes tells me I have no SIM card inserted when I do. Any ideas on how to get it working again?? I'm dying without it!

I have an iPhone 3GS and was trying to restore it...
Now it won't let me activate my phone and my itunes tells me I have no SIM card inserted when I do.
Any ideas on how to get it working again?

This means that the phone was previously hacked to carrier unlock (unauthorized unlock), and when you restored, the hack was removed and it became re-locked to its original carrier. It will now accept a SIM card only from that carrier.
Your only option is to contact the carrier it's locked to and enquire if they will provide authorized unlocking. Not all carriers will unlock and those that do usually have requirements and qualifications - i.e. you have to be a current or former customer in good standing.

Any idea where SU53 result gets stored

Hi,
My requiremnet is to capture all t-codes with user names which has authorization failures.Any idea on how to get this ?
I am trying to use FM SAPWL_STATREC_DIRECT_READ but couldn'nt get a parameter to differentiate between suceess and failures.
I know if we make a SU53 we may get these errors but does it get stored anywhere?
Rgds
Praveen

Failed attempts are not written to the database, those happen "in memory". If a user loggs on he get his profiles once read into memory. The results of SU53 are evaluated based on that.
Markus

Any Idea where Auhtorization failures gets stored??

Hi,
My requiremnet is to capture all t-codes with user names which has authorization failures.Any idea on how to get this ?
I am trying to use FM SAPWL_STATREC_DIRECT_READ but couldn'nt get a parameter to differentiate between suceess and failures.
I know if we make a SU53 we may get these errors but does it get stored anywhere?
Rgds
Praveen

Failed attempts are not written to the database, those happen "in memory". If a user loggs on he get his profiles once read into memory. The results of SU53 are evaluated based on that.
Markus

I lost all of my calender info and did not have the cloud activated. Any ideas on why that happened? Any idea if I can get that back?

I lost all of my calender info and did not have the cloud activated. Any ideas on why that happened? Any idea if I can get that back?

Not sure why this happened, but are you syncing calendar events direct with a supported calendar app on your computer?
If not, calendar events are included with your iPhone's backup which is updated by iTunes as the first step during the iTunes sync process. If you haven't synced your iPhone with iTunes since this data went missing, you can try restoring your iPhone with iTunes from your iPhone's backup. Do not sync with iTunes before doing so, and do not update your iPhone's backup before doing so when prompted.

Any FM or idea to remove # which get printed after every charin al11file

Similar Messages

Maybe you are looking for