Any Partner function in SAP CRM that determinate the Superior (chief position) of Estructure Organizative?

Hi Guru's
Any know if there any Partner Function of SPRO in CRM that simulate the standar rule 00000157  of PFAC ?
I need aplicate this Partner Function in my Policies rules, but I don't know how to do it.
Thank you very much advance,
Carlos Castillo.

Hi, use FM RH_ACT_LEADING_POSITION.
Regards

Similar Messages

  • Any report or Table to see orders with BP partner functions  in SAP CRM?

    Hello All,
    Could anyone help me  in getting  the table or any report  for orders with BP partner functions in SAP CRM?
    Would appreciate replying at the earliest.
    Cheers
    Sreedhar

    Hello Bruno,
    Thanks very much.
    It is somehow helpful for my need but  not completly. This is ok when the orders are less in number.
    My requirement is how to check the first name , last name and number for  contact persons in a list of  CRM orders(simply who is the contact person for a list of orders).Let me know for any additional info.
    I would apprecaite if you could help me in getting any other way.
    Cheers
    Sreedhar
    Edited by: sreedharhazari2 on Jun 8, 2010 9:18 AM

  • Partner functions (R/3- CRM) based on employee number (KNVP-PERNR) or CP

    Hi all gurus,
    I am trying to replicate an partner-function base on personnel number/employee number for customers from R/3 to CRM.
    For those partner-functions only the employee number is filled in KNVP-PERNR (the KNVP-KUNN2, KNVP-LIFNR and KNVP-PARNR are empty).
    If I follow the replication process I don't see the employee number getting mapped to the "bapimtcs structure" (in function module COM_BUPA_MWX_CREATE_REL) and therefore those partnerfunctions are not replicated to CRM.
    (all employees are entered in HR-R/3 and downloaded to CRM as business partners)
    Basically this is exatly the same situation described in the following forum:
    [Replicate partner functions (R/3->CRM) base on employee number (KNVP-PERNR)  |Replicate partner functions (R/3->CRM) base on employee number (KNVP-PERNR)]
    What (function modules/configuration) is necessary to get those partner-functions being replicated to CRM?
    Unfortunately I was pretty unable to collect valid solution track.
    Thanks in advance,
    AndreA

    Hi Andrea,
    We were able to solve the exact same issue.
    Here are steps used by us to fix the issue :
    IMG Settings in CRM :
    SPRO>CRM>Basic Functions>Partner Processing> Date Transfer>Distribution of Partner Functions from SAP ECC into CRM>
    Partner Function = VE
    Funciton = Employee  Responsible(00000014)   ( can be any other partner function which is a employee)
    Usage= CRM
    Also make sure the following settings are also done
    SPRO>CRM>Basic Functions>Partner Processing> Date Transfer-->Distribution of Partner Functions from CRM into SAP ECC
    Funciton = Employee  Responsible(00000014)
    Partner Function Cat = Employee
    Scenario = CRM
    R/3 func = VE    ( even though you are using the PE partner function in ECCwe use VE here as you know VE is the german  version of PE)
    Type = MR master record
    Also make sure that SAP Notes 1020514  and 1099363 have been applied in ECC.
    Let me know if you have any issues. This should fix it.
    Thanks
    Edited by: Venkat_30 on Dec 14, 2011 5:15 AM

  • R/3 Partner Function missing in CRM

    Hi Guys,
    There is partner function in R/3 called SR (Material safety sheet reciepient). This partner function is assigned as mandatory in R/3 while creating customers in R/3.
    However in the CRM system there in Role similar to that one. How do I get around this issue. Even if i create a new role how will I link this new role to the R/3 partner function?
    Ani

    Hi Ani,
    You need to map R/3 Partner funtion to CRM partner funtion and vica versa.
    Please perform the partner funtion data transfer settings as below
    In IMG settings,
    Customer Relationship Management>Basic Functions>Partner Processing-->
    Data Transfer
    Here in you have two mappings to be done
    1) Distribution of Partner Functions from SAP ECC into CRM
    2)Distribution of Partner Functions from CRM into SAP ECC
    Please read the help associated to IMG to get the clear picture.
    And see the example for mapping of partner funtion 'Sold-to-Party'
    i.e partner funtion in R/3: 'AG'
    and Partner funtion '00000001' in CRM
    Best Regards,
    Pratik Patel
    <b>Reward with Points!</b>

  • Importance of Bounce management functionality in SAP CRM

    Hi All,
    I want to discuss few interesting issues which I have come a cross while doing a setting for bounce management functionality in SAP CRM 7.0
    Before sharing my experience I want to discuss some term related to Bounce email than will discuss about types of bounce emails and cause of the bounce email.The setting of bounce functionality is describing in below link .
    http://help.sap.com/saphelp_crm700_ehp01/helpdata/en/46/3f509215835fa7e10000000a1553f7/content.htm
    In general when a website visitor sigh up they receive email from the company site, the information the site collected saved in the database but It commonly happen some of your email will be undeliever. In marketing term we say it as 'Bounce'. this is the same way happen as when a person give a bank cheque to bank and don't have sufficient money to his/her account the bank people say the cheque got bounce ..
    As we are aware emails are bounce for variety of reason such as.
         - In case the recipient email address is invalid.
         - recipient email address is inactive or closed
         - recipient mailbox is full or mail server have some technical issue etc
    In general all these bounces emails categorize in two category.
    Hard bounce- When email address is not active. example wrong email address, email address de-activated, deleted,or closed
    Soft bounce-  recipient mailbox is full, mail server have some technical issue, Out_of_office is setup .
    Now finally we come to know about the cause of bounce email and types. Now the question arises why this is so important when we have bounce management functionality active in sap crm marketing ? as described in above url.
    suppose that there is a campaigning happening for an product where 3000 person visited it. Now incase 2000 visitors shown interest so have qualified as prospect bases on the information they have provided such as name, address, salary or employment detail.
    After successfully execution of campaign now senior executives create a mailing list for all the prospects in the target group of campaign and sends email to all the users.Now if I say to how many customers really company have reached reached after campaign execution answer will be we can not have the correct fact and figure as there could be some bounce happened.
    Now incase bounce management setting is configure in your CRM system than system will receive inbound e-mails for each bounce.Suppose we have received one thousand bounce emails than we would say actual customer contacted is 1000. this is the correct fact and figure and very much useful for marketing people.
    After than executive could remove email address which were hard bounced and for soft bounce they can use some other channel to contact like telephone calls etc to reach them.
    The correct facts and figures are very much important for marketing strategy and planning and also to know success level of each campaign. Assume a scnario where in day a company launches more than 5 campaign. I feel the importace is transparent now.
    I hope you would find some interest in above blog.
    Thanks
    prem

    HI, Sreedhar
    Check this thread:
    Re: New search help on CRMD_ORDER locator
    Denis.

  • Partner function AG (Sold-to-party) - read the partner code

    Hi All!
    I tried to write an ABAP code to get the alphanumeric key, which clearly identifies the partner with partner function AG (Sold-to-party) and RE (Bill-to-party) for the Outbound delivery. I want to compare this two values and output an message if the value is not the same. My problem is that for the partner function AG it is not read the wright value (the value that the system reads is 0).
    The ABAP code is:
    DATA: ag_ec , re_df TYPE KUNNR .
    CLEAR: ag_ec , re_df .
    READ TABLE xvbpa WITH KEY parvw = <b>'AG'</b>.
      IF sy-subrc = 0 .
      <b>ag_ec</b> = xvbpa-kunnr . ENDIF.
    READ TABLE xvbpa WITH KEY parvw = 'RE'.
      IF sy-subrc = 0 .
      re_df = xvbpa-kunnr . ENDIF.
    IF NOT re_df EQ ag_ec .
      MESSAGE E006(ZFC).
    ENDIF.
    Could anybody help me to find a solution?
    Your time and response will be appreciated.
    Florina C.

    before going to ur query
    it seems there is a declaration problem .
    <b>DATA: ag_ec  is type 1 character .</b>
    <b>DATA: ag_ec type kunnr  , re_df TYPE KUNNR .</b>
    and now check the value.
    DATA: ag_ec , re_df TYPE KUNNR . " this is probelm
    CLEAR: ag_ec , re_df .
    READ TABLE xvbpa WITH KEY parvw = 'AG'.
    IF sy-subrc = 0 .
    ag_ec = xvbpa-kunnr . ENDIF.
    ag_ec = xvbpa-kunnr . ENDIF.
    with the declaration there will be only once character in ag_ec and probably it is picking 0 of that ccustomer value.
    regards,
    vijay

  • Chances for european SAP CRM consultants in the US job market?

    How would you regard chances for european SAP CRM consultants in the US job market?
    I have seen many job offers on the net for applicants with a work permit only.
    Thomas Wagner

    As far as I know, you can only get a visa if there's no resource avaliable in the whole US, looks like too much effort for a company to justify a visa, I don't know if this has changed but 1 year ago, was almost impossible.
    Cheers!
    Luis

  • Partner Functions in Procedure - CRM 2007

    We have an issue where a "Partner Function is determined on a 'Plan Header' ".
    We need to populate the Ex. Interaction Centre (CRM) function, which 95 times out of 100, works fine.
    the majority of plans that are created, this will read the Org Unit from the user creating the plan to populate this data.
    basically we have interfaces creating plans with references to Quotes, using the Standard PIAPPLUSER, and as no Org Unit is assigned to this service user, we are able to add our own Org Unit to the ICENTER function.
    however, if there are any errors during this processing, and we need to reprocess, it reads the Org Unit of the person processing the data, and not the code i am passing into CRM_ORDER_MAINTAIN....
    we have looked at the settings:
        Determination Time in Partner Determination
            Specifies at what point in a transaction the system determines business
            partners for that transaction.
            o   Recurring partner determination starts as soon as you begin creating
                a transaction document and reoccurs as you process the transaction,
                until the system has found partners for all partners functions to
                which you assigned recurring partner determination.
            o   Determination during product entry occurs when you make entries at
                item level. If you want to carry out partner determination based on
                particular products or services, use this option.
            o   Determination when saving occurs when you save the transaction for
                the first time.
                -   For example, you could be use this option to determine partners
                    based on the total value of the transaction.
    ideally, we would like the determination to only occur if there is not an OU present for the ICENTER partner function.
    does anyone have any ideas?

    could not change this programmatically due to the configuration.  no longer required.

  • Geographic Information System (GIS) functions in SAP CRM 2007

    Dear all,
    I am currently working on a SAP CRM 2007 implementation project that consists in replacing an old customer service application.
    Currently this application is managing service technicians' territories with embedded GIS functions (it relies on latitude and longitude data to assign the closest technicians to a service order).
    I would like to know if SAP CRM 2007 is covering the following:
    - GIS functions;
    - Ability to assign a technician based on this;
    - Ability to visually see the map and draw technician territory changes on it;
    - Ability to optimize technician route (mileage).
    I cannot find insights about this in the SAP Help.
    So, where can I find some details / documentation about this?
    A third party tool would be necessary and also its integration to SAP CRM?
    Thanks for your help.
    Brice.

    Brice,
    So basically I don't see this being out of the box functionality, however you could build something for this.
    1.  You need to store the geo co-ordinates for the customer on the customer master or be able to "bolt out for this".
    2.  Create a new "partner determination rule" that would make a call to the external system to propose a technician on the service order.
    3.  Have a punch out on the service order screen that links into a web like GIS application where you could visualize this and send change data back into the CRM service order.
    Now if someone else knows that CRM 2007 can do what you described out of the box, I would love to see the demo.  We have a similiar requirement, where we need to keep track of the mapping, but no need to perform the routing logic.
    Take care,
    Stephen

  • Partner functions for SAP Customer Master

    I am in the MDM solution definition phase for SAP Customer Master at one of our Cients place. The requirement is to set up a central master data scenario where creation & modification of any customer record will be done via MDM. The following components of Netweaver are in the landscape - SAP MDM, EP, XI.
    I need clarification on the following points -
    -  Is it possible to set up the partner function in MDM, if so, how?
    -  Need to replicate the standard SAP functionality where the system can be configured to create Ship To, Payer, Bill To automatically when a Sold To record is created. Is this possible? Are there any work arounds?
    Regards
    Arvind

    Hi,
    Hi Arvind,
    -  Is it possible to set up the partner function in MDM, if so, how?
    Partner Function comes under Condition Technique in SAP ECC.here some config has to be done.
    For mapping it in MDM, First create a Qualified Table - Partner Function.Determine the Non-Qualifiers and Qualifiers.Then as said by Suresh, u need Java API stuff to complete this task and frontend being EP.
    - Need to replicate the standard SAP functionality where the system can be configured to create Ship To, Payer, Bill To automatically when a Sold To record is created. Is this possible? Are there any work arounds?
    It can be done using EP as front end and Java API to dertermine the partner based on the account group.
    Thanks,
    Felix
    Edited by: Felix on May 9, 2008 1:38 PM

  • Partner function replecation from CRM to R/3

    Hi ,
    Can any one tell me whats the Object to replecate Partner functions from CRM to R/3
    Thanks in Advance.
    Shaan

    Hi,
    if you mean the customizing: the setup of partner functions on the R/3 & CRM system needs to be done seperately.
    --> in CRM, the partner functions are dependent on relationships.
    if you mean transfer the data: object/bdoc bupa_rel is used to transfer data between CRM & R/3.
    Michael.

  • How to read Business partner attachment in SAP-CRM

    Hi Experts,
         I am working in SAP CRM, i am uploading attachments for Business partner through T-code : BP.  My requirement is to read the attachment of the particular business partner in the form binary or XML. Please suggest some BAPI for class to read the attachment of business partner.
    Thanks and Regards,
    Peter Dinesh.

    Class CL_CRM_DOCUMENTS is the one that manages everything with attachments in BP transaction

  • How to I configure Tax functionality in SAP CRM 2007?

    Dear Expert,
    Kindly give me the idea of how to configure the Taxation functionality for India. This will be used to calculate the taxes applicable for Service Business.
    Kindly give me some inputs to proceed further.
    Awaiting your reply.
    Thanks,
    GJ

    Object from external system is not showing the Calling system.
    When i do the validate customizing check.
    found that in TTE country assigned is U0. How to i change this?
    when i try to assign the entries in object from external system. system not allow me to select the calling system only * symbol is coming. How do i fix this?
    Check data transfer settting s give me the green result.
    Expecting some one to throw me the some inputs to understand the technicality.
    awaiting your input.
    GJ
    Edited by: GJ sap crm service on Mar 4, 2010 2:12 PM

  • Is there any SAP module that manage the organization of trade shows/events?

    Hello everyone,
    I just wanted to know which module of SAP (if exists) can manage the organization of an event.
    For example, a beverage company which wants to invite its clients to a trade show, so it needs to plan and order all the equipment required, beverages, stage, music, staff, etc etc etc. Besides the company needs to know if the event was profitable after all.
    Does any one have any idea??
    Best regards,
    Mariana

    Hi Mariana,
    SAP CRM has Trade Promotion Management (TPM) integrated into campaign automation. Which does some of activities you have mentioned.
    Follow the SAP link : http://help.sap.com/saphelp_crm50/helpdata/en/4a/c9523e83464644e10000000a114084/frameset.htm
    <b>Reward if helps</b>
    Regards
    Paul Kondaveeti

  • Parties involved work center and partner functions in SAP WEBUI

    Dear Experts,
    Here is the situation
    I have sales rep, quote admin1, quote admin2 and quote admin3 positions in my org model. Each level has approval process.  All of these three types of users will create quotes directly without a previous document/follow-up document.  
    When a sales rep or anybody other than quote admin logon to create quote,  parties involved <> quote admin should be admin1. When admin 1 logon, it should default to admin1. Admin 2 logs in only after admin1 so, it should display admin1 and admin2. When admin 3 logson, it should show admin1, 2 and three.  They need to be able to see howmany quote admins already there in the quote.  How can I get this??  Please help me..

    Hi Sri,
    You can use Partner Determination Procedure for the first time to create a Quotation automatically which will be triggered by the system. For the next time, based on your requirement you can probably need to use something else which will trigger the partner determination and will select the partner function and the business partner. You can check the badi - COM_PARTNER_BADI which is used for the Partner Procedure Determination.
    Hope this helps.
    Thanks,
    Samantak.

Maybe you are looking for