Anyconnect maintain connection after windows logoff

Is it possible, and if so, how do I configure, the anyconnect client to remain connected after a user logs off of windows I know this is an option in some VPNs, such as nortel ipsec. I am using an ASA 5505 running 8.04

You can adjust the frequency of keepalive messages to ensure that an SSL VPN connection through a proxy, firewall, or NAT device remains open, even if the device limits the time that the connection can be idle. Adjusting the frequency also ensures that the client does not disconnect and reconnect when the remote user is not actively running a socket-based application, such as Microsoft Outlook or Microsoft Internet Explorer. Following is the example configuration:
hostname(config)# group-policy sales attributes
hostname(config-group-policy)# webvpn
hostname(config-group-webvpn)# svc keepalive 300

Similar Messages

No network connection after windows 10 install

No internet connection after windows 10 install- laptop wont recognize any wi-fi networks- repair option on MY ATT has no option for windows 10 system

Hi,
Sorry about that. One other thing to try is to try this in the command prompt:
Start - All Programs - Accessories and right click on Command Prompt, select "Run as Administrator" to open a command prompt. [For Windows 8 or 10: <Windows Logo> + x - Command Prompt(Admin)]
Reset WINSOCK entries to installation defaults: netsh winsock reset catalog
Reset IPv4 TCP/IP stack to installation defaults. netsh int ipv4 reset reset.log
Reset IPv6 TCP/IP stack to installation defaults. netsh int ipv6 reset reset.log
Reboot the machine
If still having issues, you may need to uninstall your network adapter and install it again.
-ATTU-verseCare

Photosmart 6180 All-in-One Wireless Connection After Windows 7 Laptop Added to Network

I replaced a broken Vista laptop with a new Windows 7 64-bit laptop. After I installed my Photosmart 6180 All-in-One, the printer stopped working correctly when we try to connect to it wirelessly.
I followed all the directions HP provides for updating the printer software and drivers for Windows 7.
We've tried all the suggestions for resetting the printer that we can find on the HP forums.
The printer works properly when connected via USB cable to a Vista laptop.
I was not able to get the printer to work via USB cable connected to the Windows 7 laptop.
When we try to connect via the wireless signal, regardless of Vista or Windows 7, the printer goes into an endless initialization loop.
We need to determine whether achieving a wireless connection is hopeless. If it is not, we need step-by-step instructions on how to resolve the issue.
The security system for the printer is WEP. We connect through a wireless router provided by Verizon FIOS.
Many thanks in advance for your help.

Some of HP's printers do not support WEP shared. If you are using WEP shared this could be the problem. I would suggest turning off the WEP security temporarily to see if that fixes the issue. If it does then you can look at changing the security to WEP Open system authentication.
Mike
Say "Thanks" by clicking the Kudos Star in the post that helped you.
I am an HP employee.

Loose FP connection after Windows XP update

After completing Windows XP update, I always loose the connection to the FP-2000. I've had this problem several times and it always happened after windoews update completed.
To reconnect to the FP-2000, I've tried all thinkable things: restarting Ethernet Card, other driver, changing parameters, restarting XP, restarting FP-2000 and and and. But there is only one solution: Turn off the whole test system (PC, PXI with MXI, FP-2000, Hub...) for at least 4 hours, then it will work again. I know it sounds strange, but that's how it is!
Does anybody know similar problems? Is there an other solution than waiting 4 hours after each update?
Thanks for answering
Sparti

I have searched all available resources but I couldn't find any hints about a behavior like that. All PCs in our office have the automatic Windows update option enabled but no one has ever experienced a behavior like that so it's a bit hard for me to suggest a reasonable solution.
Here are some general ideas:
Is the Windows firewall activated (but if this was the case why should the issue be resolved after 4 hours???)?
Please check you PC's IP-configuration after the Windows update. Maybe the IP address got lost and for some reason your DHCP server reassigns a new one with a delay of several hours. If this was the case all network communication should be lost after the Windows update.
Try to reconfigure your IP settings in a command window with "ipconfig /renew".
Does the problem occurr with another PC, too?
I hope this gives you at least some ideas.
Best regards,
Jochen Klier
National Instruments Germany

My Net900 keeps losing wired Ethernet Connection after windows 10 upgrade

Since I updated to windows 10, my router keeps losing the wired connection. WiFi is working fine, but I have to reset the router constantly to get wired connection working. Any suggestions?

Hello,
That's weird. I'm experiencing issues with the wireless on my laptop after updating to windows 10.
Do you have any other device that you can check the wired connection? I would like to check if this is a specific issue with Windows 10 or is the router it self with any device using a wired connection.

Satellite L750/755 - No connection after Windows Updates

HI, I have a brand new L750/755. network adapter is atheros.
after installing the windows updates (85mb, framework 3.5.1, security updates) There is no way to connect to the internet.
The laptop will still find any accesspoints, but only connect with limited connectivity or no internet access.
I had to restore the laptop to before the updates installed to fix this.
how can I get round this issue, or failing that how can I get these updates to stop intalling on shut down?
thanks in advance
ps I had already tried installin the latest network adapter drivers, changing the power settings, and connecting to other routers. nothing worked.

> I had to restore the laptop to before the updates installed to fix this.
Do this and after doing this disable automatic Windows update. When you do Windows update manually, install important updates only. Before you start update check listed optional updates and disable driver updates.

Unable to connect after windows update

window 7 updates and AVG updates occurred. Windows firewall is off and AVG firewall is not active. AVG was disable completely with not affect.

Is your whole network down, or just Firefox? Are there any error messages?
Contact your provider and have them test your service. Also, unplug your
modem. Wait about 30 seconds before plugging it in.
Some problems occurs when your Internet security program was set to trust the
previous version of Firefox, but no longer recognizes your updated version as
trusted. Now how to fix the problem: To allow Firefox to connect to the Internet
again;
* Make sure your Internet security software is up-to-date (i.e. you are running the latest version)
* Remove Firefox from your program's list of trusted or recognized programs, then add it back. For detailed instructions, see
'''[https://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet?esab=a&s=Configure+firewalls+&r=0&as=s Configure firewalls so that Firefox can access the Internet.]''' {web link}

IOS App 8.1.5 Remote Desktop can't connect to Windows 7 Pro after upgrade. Error 0x00000507

Nothing has changed between my network, Windows 7 computer or my iPad besides the upgrade of the ios app software to 8.1.5. Did not used to have any issues connecting but now when I try to connect, I get the above error when logging in.
I have tried reinstalling the ios app with no success and also confirmed I can still remote desktop to the PC from another PC with the credentials I've always been using.
I've also tried explicitly including the domain when entering the username with no luck. Looked through my Windows 7 event logs and can't find any more information on what this error means.
Has anyone seen anything similar or have any ideas what I can do to troubleshoot? Thanks!

Hi,
I have a same problem.
Although RD Client 8.1.4 worked great, now I cannot connect to Windows 7 Professional computer from my iPhone 5 (iOS 6.1.4) since the latest update.
Same as Twiggles, when I try to log in (just after entering username and password), the app gives me error code 0x507 "Disconnected from server".
Note that I connect to my PC over VPN using Cisco AnyConnect app.
After that, I've tried to connect to my PC in two different ways with same network settings as the above situation.
1. Use different remote app
I've tested free version of "PocketCloud" from Dell Wyse, and I CAN connect to my PC.
2. Use different version of iOS
I've tested the latest RD Client 8.1.5 on my another iPhone (5s) with iOS 8.1, and I CAN connect to my PC.
Therefore, I assume our 0x507 is not setting related, but probably some sort of iOS version dependent problem arise from the latest update.
Even though I tried PocketCloud, I believe RD Client is the BEST app for remote desktop for iOS.
I strongly hope this problem will be solved!
Thanks.

No longer connects to Windows 7 after update

I selected update a couple of days ago (March 26) and my phone updated. Now, it won't connect via USB to any of my Windows 7 computers. In my Device Manager, my portable devices shows a warning symbol on the MTP Device. Removing the driver and allowing the MTP driver to reinstall doesn't work. This happens on the two Windows 7 computers (one is ultimate) I have. MediaSync on my phone says it didn't connect and shows a red exclamation mark in notifications and asks if I want to try again. I try again, and the Media Sync symbol disappears but my phone still isn't connected.
Any suggestions on how to solve? (Is there some where in the phone that I make sure MediaSync acts as a drive when plugged into USB?)
Any apps that will allow me to bypass the problem?
Thanks,

I also can't get the media sync to connect after the update. I can get the mass storage to work with no issue, but media sync is having issues.
Every time I connect with media sync, Windows 7 pops up a message stating that the driver failed to load and to contact Samsung. So I contacted Samsung support, which was completely useless.
I need the media sync to work because that's the only way I've found to get DRM-protected media files to transfer properly to my Charge. If I copy them to my phone while in mass storage mode, I can't play them because there is a licensing error.
Any help would be greatly appreciated!

Windows Vista won't connect after security change

I have an AirPort Extreme base station, to which we connect using an iMac, PowerBook G4 and a Windows Vista laptop. I used to have it set to WEP, but changed it to WPA for the increased security. After the change, my PowerBook and iMac are connecting just fine, but my wife's Vista machine has been nothing but headaches. It will sometimes connect, after a bit of fighting with it, but not reliably or quickly. At the moment, it says that it is connected with local and internet access, but I can't actually access anything on the internet, and diagnosing the problem in Vista reports that a wireless network cannot be found (despite the fact that it simultaneously reports that it is connected to one).
I know squat about Windows -- I'm a Mac guy. Anybody know how to help me fix this?
Thanks in advance!

No answers, but the problem seems to have disappeared. Man, I'm starting to realize how fortunate I am to have been using Macs for the last 23 years. I think Vista is going to be a very good thing for Apple! There's nothing like actually using Vista to make one want to flee screaming and never look back...

My iPod will not connect to itunes after windows 8.1 download

My iPOD will not connect to itunes after windows 8.1 download
I already uninstall itunes and made sure there were no file left before I installed again (it didn't appear to be any files left but music I had on it before was still there when I reinstall it)
My ipod does work on my old computer and it was working on windows 8 before I update to 8.1
I don't want to installed again because I just did that and didn't work!
I want to use my iPod on this computer and system. Can this be fix?

Hey TheBurntApple,
Thanks for the question. I understand that you are experiencing issues with your iPhone connecting to iTunes for Windows. While you may have already attempted most of the steps in this article, I wished to provide it to you just in case something was omitted.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M.

Why can´t i connect to Windows servers after installing Lion?

Why can´t i connect to Windows servers after installing Lion?

Me too!
MacBook Pro 15" 2011, OS X Lion 10.7

Connection to windows server sometimes fails after standby

Hello,
I am using a Macbook Pro with 10.5.5.
Connections to Windows file servers works well. But sometimes after resuming from standby the it is not possible to connect. The "Connect to..." hangs and in the konsole i see:
23.11.08 11:37:34 com.apple.launchd[90] (com.apple.netauth.useragent[3770]) Exited abnormally: Segmentation fault
After rebooting the mac it works again.
Does anybody know how to solve this?
Thanks in advance
Alex

Hello nobody loopback,
The following is unrelated to this post, however it is the only way I know to contact you.
I found this page
http://discussions.apple.com/thread.jspa?threadID=1218394&start=60&tstart=0
I have a nearly identical situation where a backed up my entire "Macintosh HD" to a compressed DMG image file. During the restore process on the Leopard Install DVD it froze and I had to force restart. Upon restarting, I found my internal HD with only an Applications folder filled alphabetically with 73 and a half apps ending with a half restored iDVD.app and worst of all my single copy DMG (I know, foolish) reporting a "No mountable file systems" error. Due to the highly proprietary and closed nature of Disk Utility DMG images, I have chosen to contact you directly for help as the Apple Reps turn me to 3rd party data recovery and Data Recovery companies claim they don't do file repair. I feel someone with a wealth of knowledge concerning the DMG file format is my only option.
I was wondering if you could help me out.
So what do you say?
Here is the thread I posted for my case.
http://discussions.apple.com/thread.jspa?threadID=1699574&tstart=0
thank you for your time,
Marcus Schieffert
marcus3k AT gmail

MacBook Pro drops Wi-Fi connection after upgrading to 10.6.5. Fixed!

MacBook Pro drops Wi-Fi connection after upgrading to 10.6.5. Airport says no IP is detected then suddenly reconnects?
This has been a problem I’ve been troubleshooting for the last month. I’m new to the Mac family and have loved my experience up until this point. I was under the impression that mac’s are supposed to be so user friendly that even your grandmother could use one with out having any technical knowledge. I mean I shouldn’t have to be deleting drivers or reformat my mac because of an OS update glitch? (That’s what the guy at the Genius Bar told me to do.) What I refused to succumb to was that I’m really good with computers. I get at least a phone call every other week from someone asking me for tech support. So I’d like to think that nothing I’ve done to the system would have caused this anomaly.
After numerous attempts of troubleshooting and researching forms I believe I’ve discovered a solutions that seems to be working for me.
Here are the steps I took to create a consistent connection to my Wi-Fi. I believe it was a combination of all these steps to create success.
1.) Changed my router to use G Wireless Only. (I’m assuming this removed any unnecessary frequencies to allow G to broadcast stronger?)
2.) Did a scan on the other networks in my area to find out what channel everyone else was broadcasting on. Copy and past the text below into a terminal window.
sudo ln -s /System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resourc es/airport /usr/sbin/airport
This will allow you to simply type “airport” in the terminal window to execute the command.
Type airport –s
This will display all the networks in your area and what channel they are broadcasting on.
3.) Changed my router to use a channel that no one in my area was using. (This helped to make my network stronger and free of interference.)
The last steps will help your home network improve but these next steps I believe helped fix any install errors caused maybe by the 10.6.5 update on my mac.
4.) Boot your Mac into safe mode by holding down the shift key while booting.
5.) Open System Preferences and Click on Network.
6.) Click the drop down menu from Locations at the top of the screen. Click edit locations..
7.) Create a new location by clicking the + and give it a new name.
8.) Delete the old location by clicking on the old locations name and click the – to remove.
9.) Reboot
10.) Open System Preference and click on Network.
11.) Click on the settings sprocket next to the + and – and click on Set Service Order…
12.) Drag Airport to the top of the list of devices then click Ok.
Now this last step is what seemed to eliminate the issue. I hardcoded my IP address to my network. This way my computer will always use the same IP and not have to search.
13.) Click on Advanced under Network.
14.) Click on TCP/IP. Click on the drop down for Configure IPv4 and change it to Manually.
15.) Fill out the fields with your IPv4 Address: 192.168.1.1xx (x=whatever number) Subnet Mask: 255.255.255.0 Router: 192.168.1.1 (All of these settings are pretty standard for most home networks.)
16.) Click on the drop down for Configure IPv6 and change it to Off.
17.) Next click on the DNS tab at the top.
18.) Click the + to add a DNS Record.
To find your DNS Server open a Terminal window by launching Applications --> Utilities --> Terminal
Then Type cat /etc/resolv.conf
(There is a space between cat and /. Without it you’ll get no such file or directory.)
This should return two addresses. Your ISP’s DNS Servers.
19.) Add both records to the DNS and click Ok.
20.) Click Ok then under Network Click Ok.
21.) Reboot router then Mac
22.) Fixed my connection issue
The symptoms I experienced eluded me to believe that something with the DHCP is going into an idle then disconnecting. Before when DHCP was set to automatically assign the network signal would time out then searchers for a new IP resulting in Airport displaying No IP is detected. By setting my IP to a fixed address I still notice a slight drop in bandwidth at moments but because of the assigned IP I never loose connection. I can now stream video, play games, chat all without getting disconnected.
I believe this fix will work for my home network but I also noticed this issue at work so for each location that I connect for the time being I’ll create each there own location and hardcode the IP address to that network. I’ve been reading that 10.6.6 is coming soon so maybe this will be resolved for good in the next update.
Let me know if this helps or if you have any questions.
Best of luck.
Message was edited by: erockdabass
Message was edited by: erockdabass

I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
Did you ever find anything more to this?

XE service lost after windows server 2003 restart - must start repair

I have a problem with Oracle XE 10g on Windows 2003 SP2.
Installation went fine, I could use database, go to home page, add tables, views, functions etc.., link database to sql server and query tables from several sql several sql servers on the network etc.
In general everything was fine, but...
After windows 2003 restart XE service does not start, db home page is not accessible and
lsnrctl stat
is giving me:
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 25-RUJ-2009 22:46
:26
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(OVO NE RADI) (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR
_XE))(ADDRESS=(PROTOCOL=TCP)(HOST=sql-server-test.ie.local)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 25-RUJ-2009 22:45:56
Uptime 0 days 0 hr. 0 min. 30 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\a
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\l
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sql-server-test.ie.local)(PORT=1521)
)(OVO NE RADI) (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
There is no sign of XE, XEXBD nor XE_XPT service.
I restarted installation and performed repair and everything went back to normal.
After repair
lsnrctl stat
is giving
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 25-RUJ-2009 23:11
:40
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(OVO NE RADI) (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR
_XE))(ADDRESS=(PROTOCOL=TCP)(HOST=sql-server-test.ie.local)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 25-RUJ-2009 22:45:56
Uptime 0 days 0 hr. 25 min. 44 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\a
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\l
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sql-server-test.ie.local)(PORT=1521)
)(OVO NE RADI) (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=
HTTP)(Session=RAW))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "xe" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
The command completed successfully
After repair all is good but I must not restart server.
If I do this the story repeats itself.
No XE, XEXBD etc services, no access to database nor to homepage.
Starting install/repair - everything works. After restart same story again....
I could not find the way to aviod constant repair after restart.
Is there any way out of this?

Thank you for the response.
But the problem persist.
The lsnrctl dont recognise the XE service. The OracleServiceXE is up and running.
D:\oraclexe>lsnrctl services
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 12-OCT-2009 12:55
:48
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
The command completed successfully
listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = D:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST =localhost)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
tnsnames.ora
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
XE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST =localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = XE)
(SRVR = DEDICATED)
)

Anyconnect maintain connection after windows logoff

Similar Messages

Maybe you are looking for