Anywhere Access not working

Hi,
I have an HP Proliant Microserver Gen8 running Windows Server 2012 R2 Essentials and a Draytrek Vigor 2710n router.
I managed to setup Anywhere Access using a Microsoft *.remotewebaccess.com domain. It worked for one day then I installed Hyper-V it stopped after uninstalling Hyper-V it still doesn't work, I had to manually forward the ports on the router and I disabled
UPnP it wasn't doing anything.
When I try to repair it I get these errors:
Anywhere Access to your server is blocked
There may be more than one router on your network
UPnP is not enabled on the router
Thanks in advanced.

Well to start from the beginning.  Hyper-V will not break remote access.  I have a test box here that is never doing anything so I enabled the Hyper-V role to play with it.  All still works fine including hyper-V. 4 is the PID I get also.
I suppose check the bindings on the default site in IIS Admin.  It is normally set to all unassigned.  Have you installed any other web stuff, media servers, etc?
Grey

Similar Messages

  • Windows server anywhere access not working from outside the lan

    ok so heres what i have done so far i installed windows server 2012 essential on a computer followed the wizard to add a couple of users and gave them anywhere access followed the wizard and ran the anywhere access to completion setup the ports 80 and 443
    on router manually to forward to my router ip 10.0.1.20 
    my server is still on dynamic ip
    then i go to a windows 7 ultimate computer whent to the connect url downloaded the connect tool ran to completion and restarted the computer so far everything working inside my lan i can connect to the server see shared files and open the dash management
    now i go outside connect to a wired or wireless network of a friend and try to connect to http://xxxxxxx.remotewebaccess.com
    but am unsuccessfull then i check on my network adapter page and see that there is a new adapter that is called as my remotewebaccess.com so i click on it and try to connect but still fails........
    please help what am i doing wrong?
    i checked everywhere and cant find a solution.
    Thank you

    It is probably better to assign a static IP to your server, but OTH it may not change.  But you really hate to go off on vacation and have the ip change and everything break.
    Now you said you forwarded ports 80 and 443 to your router, I bet you meant your server?
    Do www.whatismyip.com and from outside ping xxxx.remotewebaccess.com and make sure they are true same ip
    From a PC or the server on your network go to grc.com and do shields up and make sure it reports 80 and 443 as open
    Grey

  • Access to Outlook Anywhere does not work

    Good evening,
    I recently installed an Exchange Server 2013 CAS / MB.
    Until now, the server presented a few errors (mainly in the
    event log) that does not seem to significantly influence functionality.
    This week I published the server on the Internet and verified various malfunctions
    related to the access from outside.
    In particular from outside:
    1 - OWA does not work with Windows integrated authentication, it works with the Forms based authentication;
    2 - Outlook Anywhere does not work from internet.
    I've done a lot of research and testing without success.
    With regard to the first issue (which is not a priority but can relate to second one)
    add that in Firefox I get a first authentication request. If
    I enter credentials it ask again for identical authentication (repeatly), if I cancel it shows a second one that instead allows me access (are slightly different).
    I assume that the first is the integrated Windows application and the second is basic authentication.
    Internet Explorer shows me only the first authentication request and if I cancel shows blank page.
    The problem is
    priority 2:
    Outlook connects without problems on LAN network, the Internet
    seems to download the correct information
    (autodiscover), but then does not connect
    to the server (connection to Microsoft Exchange is unavailable).
    If you manually edit the settings,
    auto-configuration server returns as
    a [email protected]. If I change
    manually the server (and proxy settings
    http), the result does not change.
    - Setting information -
    The server is installed
    in the LAN network and is exposed on the Internet through
    a firewall (Pat on port 443, et al. not 80)
    on a public address.
    The public and private DNS have been configured with a
    host record (A) and two
    CNAME (webmail and autodiscover).
    The internal Outlook clients connect
    with autodiscover and HTTPS /
    NTLM / SSL (Outlook connectivity
    status).
    IMAP, SMTP, POP, ActiveSync function.
    Exchange remote connectivity analizer retrieves Autodiscover information but doesn't pass test for RPC/HTTP access (it discard accesson
    port 443 and try port 80, SPF isn't configured).
    The navigation to the url
    https://proxyexternalURL/rpc/rpcproxy.dll  has the same behaviour like problem 1.
    Test-OutlookConnectivity returns unmanaged error ('WARNING: An unexpected error has occurred and a Watson dump is being generated: Failed to find the probe result for invoke now request id -- and probe workdefinition id --').
    Errors in eventviewer: 5011 - WAS (one time), 139 - MSExchange OWA (some not ripetitive), 3028 - MSExchangeApplicationLogic (every 6 hours), 106 - MSExchange common (many during working hour), 65535 - application (some at nighttime 00.00 - 03.00 a.m.), 1006
    - MSExchangeDiagnostic (every 30 min), 6002 - MSExchange Mid-Tier Storage (about every 5 minutes), 5 - MSExcahnge Workload Management (one time).
    Ask for further information.
    - Cmdlet and Autodiscover output -
    Get-OutlookAnywhere | fl name,*auth*,*ssl*,*host*
    Name                               : Rpc (Default Web site)
    ExternalClientAuthenticationMethod : Basic
    InternalClientAuthenticationMethod : Ntlm
    IISAuthenticationMethods           : {Basic, Ntlm, Negotiate}
    SSLOffloading                      : True
    ExternalClientsRequireSsl          : True
    InternalClientsRequireSsl          : True
    ExternalHostname                   : webmail.name_domain.test
    InternalHostname                   : webmail.name_domain.test
    Get-OutlookProvider | ft -autosize
    Name     Server CertPrincipalName                      TTL
    EXCH            msstd:webmail.name_domain.test         1  
    EXPR             msstd:webmail.name_domain.test         1  
    WEB                                              
         1  
    Get-AutodiscoverVirtualDirectory | fl name,*auth*,*url*
    Name                          : Autodiscover (Default Web site)
    InternalAuthenticationMethods : {Basic, WSSecu.testy, OAuth}
    ExternalAuthenticationMethods : {Basic, WSSecu.testy, OAuth}
    LiveIdNegotiateAuthentication : False
    WSSecu.testyAuthentication      : True
    LiveIdBasicAuthentication     : False
    BasicAuthentication           : True
    DigestAuthentication          : False
    WindowsAuthentication         : False
    OAuthAuthentication           : True
    AdfsAuthentication            : False
    InternalUrl                   :
    ExternalUrl                   :
    Get-MapiVirtualDirectory | fl name,*auth*,*url*
    Name                          : mapi (Default Web site)
    IISAuthenticationMethods      : {Basic, Ntlm, Negotiate}
    InternalAuthenticationMethods : {Basic, Ntlm, Negotiate}
    ExternalAuthenticationMethods : {Basic, Ntlm, Negotiate}
    InternalUrl                   : https://webmail.name_domain.test/mapi
    ExternalUrl                   : https://webmail.name_domain.test/mapi
    Autodiscover.xml
    <?xml version="1.0" encoding="utf-8"?>
    <Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
      <Response xmlns="http://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a">
        <User>
          <DisplayName>user</DisplayName>
          <LegacyDN>/o=organization_name/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=e4c0c18c8f214afbb5152bb08823179d-user</LegacyDN>
          <AutoDiscoverSMTPAddress>user@name_domain.test</AutoDiscoverSMTPAddress>
          <DeploymentId>d60c71c9-3740-404c-a38c-aa24e6105432</DeploymentId>
        </User>
        <Account>
          <AccountType>email</AccountType>
          <Action>settings</Action>
          <MicrosoftOnline>False</MicrosoftOnline>
          <Protocol>
            <Type>EXCH</Type>
            <Server>72036b30-a4d4-4b42-9c39-445bd04c23a6@name_domain.test</Server>
            <ServerDN>/o=organization_name/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=72036b30-a4d4-4b42-9c39-445bd04c23a6@name_domain.test</ServerDN>
            <ServerVersion>73C082C8</ServerVersion>
            <MdbDN>/o=organization_name/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=72036b30-a4d4-4b42-9c39-445bd04c23a6@name_domain.test/cn=Microsoft Private MDB</MdbDN>
            <PublicFolderServer>webmail.name_domain.test</PublicFolderServer>
            <AD>DC2.name_domain.test</AD>
            <ASUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</ASUrl>
            <EwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EwsUrl>
            <EmwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EmwsUrl>
            <EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
            <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-um>
            <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-aggr>
            <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=name_domain.test</EcpUrl-mt>
            <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-ret>
            <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-sms>
            <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&amp;exsvurl=1&amp;FldID=&lt;FldID&gt;&amp;realm=name_domain.test</EcpUrl-publish>
            <EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-photo>
            <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tm>
            <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;.testle=&lt;.testle&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmCreating>
            <EcpUrl-tmE.testing>?rfr=olk&amp;ftr=TeamMailboxE.testing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmE.testing>
            <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-extinstall>
            <OOFUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</OOFUrl>
            <UMUrl>https://webmail.name_domain.test/EWS/UM2007Legacy.asmx</UMUrl>
            <OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
            <ServerExclusiveConnect>off</ServerExclusiveConnect>
            <CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
          </Protocol>
          <Protocol>
            <Type>EXPR</Type>
            <Server>webmail.name_domain.test</Server>
            <SSL>On</SSL>
            <AuthPackage>Basic</AuthPackage>
            <ASUrl>https://webmail.name_domain.test/ews/exchange.asmx</ASUrl>
            <EwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EwsUrl>
            <EmwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EmwsUrl>
            <EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
            <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-um>
            <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-aggr>
            <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=name_domain.test</EcpUrl-mt>
            <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-ret>
            <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-sms>
            <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&amp;exsvurl=1&amp;FldID=&lt;FldID&gt;&amp;realm=name_domain.test</EcpUrl-publish>
            <EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-photo>
            <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tm>
            <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;.testle=&lt;.testle&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmCreating>
            <EcpUrl-tmE.testing>?rfr=olk&amp;ftr=TeamMailboxE.testing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmE.testing>
            <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-extinstall>
            <OOFUrl>https://webmail.name_domain.test/ews/exchange.asmx</OOFUrl>
            <UMUrl>https://webmail.name_domain.test/ews/UM2007Legacy.asmx</UMUrl>
            <OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
            <ServerExclusiveConnect>on</ServerExclusiveConnect>
            <CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
            <EwsPartnerUrl>https://webmail.name_domain.test/ews/exchange.asmx</EwsPartnerUrl>
            <GroupingInformation>LAN</GroupingInformation>
          </Protocol>
          <Protocol>
            <Type>WEB</Type>
            <Internal>
              <OWAUrl AuthenticationMethod="Basic, Fba">https://webmail.name_domain.test/</OWAUrl>
              <Protocol>
                <Type>EXCH</Type>
                <ASUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</ASUrl>
              </Protocol>
            </Internal>
            <External>
              <OWAUrl AuthenticationMethod="Basic">https://webmail.name_domain.test/</OWAUrl>
              <Protocol>
                <Type>EXPR</Type>
                <ASUrl>https://webmail.name_domain.test/ews/exchange.asmx</ASUrl>
              </Protocol>
            </External>
          </Protocol>
          <Protocol>
            <Type>EXHTTP</Type>
            <Server>webmail.name_domain.test</Server>
            <SSL>On</SSL>
            <AuthPackage>Ntlm</AuthPackage>
            <ASUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</ASUrl>
            <EwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EwsUrl>
            <EmwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EmwsUrl>
            <EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
            <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-um>
            <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-aggr>
            <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=name_domain.test</EcpUrl-mt>
            <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-ret>
            <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-sms>
            <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&amp;exsvurl=1&amp;FldID=&lt;FldID&gt;&amp;realm=name_domain.test</EcpUrl-publish>
            <EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-photo>
            <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tm>
            <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;.testle=&lt;.testle&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmCreating>
            <EcpUrl-tmE.testing>?rfr=olk&amp;ftr=TeamMailboxE.testing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmE.testing>
            <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-extinstall>
            <OOFUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</OOFUrl>
            <UMUrl>https://webmail.name_domain.test/EWS/UM2007Legacy.asmx</UMUrl>
            <OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
            <ServerExclusiveConnect>On</ServerExclusiveConnect>
            <CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
          </Protocol>
          <Protocol>
            <Type>EXHTTP</Type>
            <Server>webmail.name_domain.test</Server>
            <SSL>On</SSL>
            <AuthPackage>Basic</AuthPackage>
            <ASUrl>https://webmail.name_domain.test/ews/exchange.asmx</ASUrl>
            <EwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EwsUrl>
            <EmwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EmwsUrl>
            <EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
            <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-um>
            <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-aggr>
            <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=name_domain.test</EcpUrl-mt>
            <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-ret>
            <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-sms>
            <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&amp;exsvurl=1&amp;FldID=&lt;FldID&gt;&amp;realm=name_domain.test</EcpUrl-publish>
            <EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-photo>
            <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tm>
            <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;.testle=&lt;.testle&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmCreating>
            <EcpUrl-tmE.testing>?rfr=olk&amp;ftr=TeamMailboxE.testing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmE.testing>
            <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-extinstall>
            <OOFUrl>https://webmail.name_domain.test/ews/exchange.asmx</OOFUrl>
            <UMUrl>https://webmail.name_domain.test/ews/UM2007Legacy.asmx</UMUrl>
            <OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
            <ServerExclusiveConnect>On</ServerExclusiveConnect>
            <CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
          </Protocol>
        </Account>
      </Response>
    </Autodiscover>
    Get-OwaVirtualDirectory | fl name,*auth*,*url*
    Name                          : owa (Default Web Site)
    ClientAuthCleanupLevel        : High
    InternalAuthenticationMethods : {Basic, Fba}
    BasicAuthentication           : True
    WindowsAuthentication         : False
    DigestAuthentication          : False
    FormsAuthentication           : True
    LiveIdAuthentication          : False
    AdfsAuthentication            : False
    OAuthAuthentication           : False
    ExternalAuthenticationMethods : {Basic}
    Url                           : {}
    SetPhotoURL                   :
    Exchange2003Url               :
    FailbackUrl                   :
    InternalUrl                   : https://webmail.name_domain.test/
    ExternalUrl                   : https://webmail.name_domain.test/

    Follow the results of the test
    Outlook Anywhere (RPC over HTTP).
    Has been used an account for which
    outlook anywhere works. The account
    for which the outlook anywhere does not work is
    an administrative account and therefore
    can not be used in the test.
    Autodiscovery returns the
    same result for both mailbox.
    I'm testing RPC/HTTP connectivity.
    Testing RPC over HTTP has not been exceeded.
    Test steps
    Microsoft connectivity Analyzer is attempting to test the Autodiscover service for user_test@domain_name.test.
    Test the Autodiscover service has not been exceeded.
    Test steps
    I'm trying to contact the Autodiscover service with each method available.
    I was not able to contact the Autodiscover service with no method.
    Test steps
    I'm trying to test the possible URL for the Autodiscover service https://domain_name.test/AutoDiscover/AutoDiscover.xml
    The test of this potential URL for the Autodiscover service has not been exceeded.
    Test steps
    I'm trying to resolve the host name domain_name. DNS test.
    I was able to resolve the host name.
    IP addresses are returned: xxx.yyy.zzz.www
    I'm testing the TCP port 443 on the host domain_name. tests to check that is open and listening.
    The door has been opened properly.
    I'm testing the validity of your SSL certificate.
    The SSL certificate has not exceeded one or more validation controls.
    Test steps
    Microsoft connectivity Analyzer is attempting to obtain the SSL certificate from the remote server domain_name. test on port 443.
    Microsoft connectivity Analyzer got the remote SSL certificate.
    Remote certificate subject: E = it_staff@domain_name.test, CN = * domain_name. test, OU = it staff, O = domain_name, L = city, S = state, C = test issuer: E = it_staff@domain_name.test, CN = * domain_name. test, OU = it staff, O = domain_name,
    L = city, S = state, C = test.
    I am validating the certificate name.
    I could not validate the certificate name.
    More info about this issue and how to resove it
    The host name domain_name. testing does not match any name found on the certificate and server = it_staff@domain_name.test, CN = * domain_name. test, OU = it staff, O = domain_name, L = city, S = state, C = test.
    I'm trying to test the possible URL for the Autodiscover service https://autodiscover.domain_name.test/AutoDiscover/AutoDiscover.xml
    The test of this potential URL for the Autodiscover service has not been exceeded.
    Test steps
    I'm trying to resolve the host name autodiscover. domain_name. DNS test.
    I was able to resolve the host name.
    IP addresses are returned: xxx.yyy.zzz.kkk
    I'm testing the TCP port 443 on the host autodiscover. domain_name. tests to check that is open and listening.
    The door has been opened properly.
    I'm testing the validity of your SSL certificate.
    The SSL certificate has not exceeded one or more validation controls.
    Test steps
    Microsoft connectivity Analyzer is attempting to obtain the SSL certificate from the remote server autodiscover. domain_name. test on port 443.
    Microsoft connectivity Analyzer got the remote SSL certificate.
    Other details
    Remote certificate subject: CN = webmail. domain_name. test, OU = it staff, O = domain_name, L = city, S = city, C = test issuer: CN = domain_name-DC1-CA, DC = domain_name, DC = test.
    I am validating the certificate name.
    I validated the certificate name.
    Other details
    I found the host name autodiscover. domain_name. test in the voice of the alternative name of the certificate object.
    Elapsed time: 1 ms.
    I am validating the reliability of certificates.
    I was not able to validate the reliability of the certificate.
    Test steps
    Microsoft connectivity Analyzer is attempting to generate certificate chains to a certificate CN = webmail. domain_name. test, OU = it staff, O = domain_name, L = city, S = city, C = test.
    I failed to build a certificate chain for the certificate.
    Other details
    Failed to generate the certificate chain.
    May be missing the required intermediate certificates.
    I'm trying to contact the Autodiscover service using the HTTP redirect method.
    I was not able to contact the Autodiscover service using the HTTP redirect method.
    Test steps
    I'm trying to resolve the host name autodiscover. domain_name. DNS test.
    I was able to resolve the host name.
    IP addresses are returned: xxx.yyy.zzz.kkk
    I'm testing the TCP port 80 on the host autodiscover. domain_name. tests to check that is open and listening.
    The specified port is blocked, is not listening or doesn't produce the expected response.
    More info about this issue and how to resove it
    I encountered a network error while communicating with the remote host.
    I'm trying to
    find the
    SRV DNS record _audiscover._tcp.domain_name.test.
    I failed to find
    the SRV record of the
    Autodiscover service
    in DNS.
    Some clarifications:
    1 - xxx.yyy.zzz.www and xxx.yyy.zzz.kkk
    are two static public addresses
    of which only the latter exposes Exchange services;
    2 - The certificate
    *. Domain_name.test is not related
    to Exchange services;
    3 -I imported the certificate
    of the issuing CA on the standalone test PC to validate the certificate.
    3- The port 80 is not open and are not published SRV records.
    Best regards.

  • Mail yahoo pop access not working.

    This has been going on for 2 days now. Re set up my account in mail but nothing just the ! next to the mailbox. Anyone else having problems?

    Sending an email is something totally different again - you can send yourself or anyone else an email to any email address.
    You can also send or forward any email while on your Yahoo account to yourself or anyone else.
    Setting up Yahoo to automatically forward emails to your home email address is something else. Here is an excerpt from Yahoo Help:
    +The ability to access Yahoo! Mail using an email reader program such as Outlook, Eudora, or Thunderbird is only available to customers of our premium Yahoo! Mail Plus service. To determine whether you have purchased this service, please visit the My Services page.+
    Although this does not mention Apple Mail, it functions exactly like Outlook, etc. so it will not work. Here is the link to the entire help page:
    http://help.yahoo.com/l/us/yahoo/mail/yahoomail/mailplus/pop/pop-35.html;_ylt=An EHIP08O6GRC7cEYzjbTbe7myN4
    I have no idea why it might have worked for you previously, but according to Yahoo, it cannot be done unless you pay for the service.
    So, unless I've totally misunderstood what you are trying to say, I do not have a different answer and it does not have anything to do with your Mac or OS.

  • Expression using Map access not working....

    I am attempting to use the ability to access a Map by key from a binding expression on the jsp. I have extended HashMap and overridden the get method in order to return a Boolean from the get(key) method.
    This works:
    rendered="#{bean.enabledFunctionSecurityMap['key1']}"
    it ends up calling the bean.getEnableFunctionSecurityMap().get("key1");
    This should work also but doesn't:
    rendered="#{bean.enabledFunctionSecurityMap['key1'] or bean.enabledFunctionSecurityMap['key2']}"
    Any reason why a single Boolean returned from a Map would work fine, but a more complex statement with 2 Booleans will not work. Doing a statement like this just accessing multiple boolean getter functions on a bean works, how come access muiltiple Map returns does not?
    Any help is appreciated.
    Thanks,
    Mike

    All righty then, I solved my own problem.
    There were actually 2 issues.
    1. I could so far only get this to work if the Overridden Map Object is registered as a manged-bean itself.
    2. I was testing to see if it worked by using System.out.println methods in my overridden get() method. Appearantly the JSF EL is smarter than I am. If you have #{binding1 or binding2} and binding1 evaluates to True, binding2 is never evaluated. The expression is short circuited and returns true... DUH....
    So this expression fires both bindings....
    rendered="#{enabled['key1'] and not enabled['key2']}"
    Where enabled is...
    <managed-bean>
    <managed-bean-name>enabled</managed-bean-name>
    <managed-bean-class>security.EnabledFunctionSecurityMap</managed-bean-class>
    <managed-bean-scope>session</managed-bean-scope>
    </managed-bean>
    Next step will be to try and figure out how to get this to work where the EnabledFunctionSecurityMap is on another bean.
    Hope this helps anyone trying to do the same.
    Mike

  • IOS 8.02 guided access not working for Ipad 2

    Will the next update for iOS 8 fix the issue for guides access for Ipad 2? Issue; function not working at all. And when will this update come?
    We have now tried everything we can think of. Reset settings, totale factory reset etc. This doen both on the Ipad and thorugh iTunes.
    For us the Ipad got useless with iOS 8 as we us it as a visitor kiosk using the app SIGN IN. We really regret updating.... please fix asap

    I can confirm that this works on 3rd Generation iPads.  But not 2nd Generation iPads.  I have found that if Guided access was enabled prior to the upgrade it might reset in this process.
    Turn off Guided Access in Accessibility / Settings.
    Hard reboot.  (Hold Home and Lock buttons for 7 seconds)
    Turn on Guided Access in Accessibility / Settings.  Reset Passcode.
    Anyone have luck with a newer model?

  • 10.8 Server - AFP Guest access not working

    Hi Folks
    I have a brand new Mac Mini server running the latest 10.8.4 and Server.app from the app store (10.8 / v2 / whatever it's called these days).  I have everything up and running perfectly except that no matter what I do when users connect via AFP there is no option for them to connect as guest.  It literally just does not even show up in the login dialog.
    I have several AFP share points setup to allow guest access, I have enabled the option in System Prefs->Users and Groups->Guest User->Allow guests to connect to shared folders.  I have even also enabled it via command line tool; serveradmin settings afp:guestAccess = yes
    But no matter what I do any machines connecting (either via browsing to the server via finder and connecting or directly from "Connect to server" using the afp:// URI approach) the login dialog doesn't give us the option to select to connect as guest -- it's just not there at all in the dialog box.
    This is fairly urgent, a few more days and this server needs to go into production at our school here and this is essential for the way we need to do things.  A little more background information:  we are bound to both a local OD setup and a campus wide AD setup (not sure if any of this matters or not).
    Help and thanks!

    And I guess toggling File Sharing on and off about a dozen times it seems to have finally picked up and is allowing guest access to work :/  Answer my own question!

  • Timed Access not working on new Airport Extreme (802.11n).

    I bought a new Airport Extreme (802.11n) to use as a router for my network. The network has a mixture of Macs and PCs, using a mixture of wired and wireless connections.
    I configured the security settings with on the Airport Extreme to Timed Access. I set the default setting is to No Access.
    Three computers are set with "Everyday, Between 8:00am and 11:00pm"; however, when it's 11:00pm, nothing happens. The three computers continue to have access.
    I know the MAC addresses I entered are correct. Does anyone know why the Timed Access is not working?

    Yes, the printer was initially set the same way it always was on my old router. It used to pop right up on the list. After I switched I was getting communication errors. Ok, new setup, I wasn't worried yet. When I got to the setup window and it a new printer wasn't found I tried updating drivers. No luck. I then used the IPP mode to enter the IP address with the address on the Canon screen. It failed. I then did the same setup telling it which software from the driver list to use. It still could not see it. The odd part is that the Canon can obviously  see the router as its LAN setting read active and it is receiving the IP. I have proceeded to play with every setting on the printer and it is back to factory reset. Oh, I should mention that I have also tried to use Canons network setup utility software and it can not find the connection either. So I really think this is a problem within the router. I have seen many complaints about this on other forums, but most were looking to use the usb on the print server. My Airport is nowhere near my printer and I don't want to lose my all-in-one functions. Some think hard lined ethernet is ancient, but it really is a nice setup. Fast and reliable.

  • Anonymous Access Not Working on 3 Lists (Slideshow provided in link)

    There are three lists that have anonymous access settings configured.
    The anonymous access settings however do not work for some reason. I need to know how to make them show up AGAIN.
    The SharePoint administrator before me had all the lists working properly with anonymous access.
    I, unfortunately, inherited permissions from parent on all lists and sites, and somehow broke the anonymous permissions. They don't work anymore.
    Please see the slideshow to view what I am looking at. This will show all pages and their respective permissions per page.
    Anonymous access permissions stopped working on all three lists when I disabled them. When I tried to enable them again, I assumed they would work easily, but they do not.
    You will be viewing what I see as a site collection administrator. When I try to view in incognito with these settings it doesn't work.
    http://s304.photobucket.com/user/mirzabaig1/slideshow/
    http://s304.photobucket.com/user/mirzabaig1/library/?sort=9&page=1

    Hi,
    Thanks for your sharing! It will be beneficial to others in this forum who meet the same issue in the future.
    Wendy
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Music quick access not working

    Apologies if this has been raised before, I had a quick look and couldn't find it.
    I have an iPhone 4s and updated (begrudgingly) to IOS6 at the weekend.
    I frequently use my iPhone at work for music.  From standby I normally double press the home button and it brings up the play/pause menu for my music, from there I can control the current playlist.  This still comes up but doesn't work anymore.  Similarly if I'm in the quick access menu at the bottom of my phone and scroll left I get access to the music controls, but again these are not working.  The only way to play/pause my music is from within the music app.
    Does anyone know if this is a known issue with IOS6 or something I should investigate further?
    Thanks,
    Gillian.

    I found a solution by accident, my phone battery died, when I charged it and turned it back on the quick access suddenly worked. The issue reoccurs every now and then, usually when I've rebooted my phone for whatever reason but another reboot always fixes it.
    Hope this helps.
    Gillian

  • Web access not working or too slow

    I just purchased a new officejet pro 8500a multi task printer.  I use wireless internet connect to my router. I am able to receive print jobs from my laptop thru the wireless just fine.  But when I try to load an app. it says unable to receive content from web and also i send things through the email on eprint,  and it show pending on the eprint site but wont transfer to my printer.  I have excellent wireless signal.  I'm not sure why my web access is not working .  Both laptops I have are wireless and access the interest just fine.   Must be something easy I hope.
    Thanks

    Tell me about your network - router brand/model, encryption type (WEP, WPA, etc) and ISP type (DSL, Cable, etc).
    You may also find better help on this board.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Priviledge access not working.

    Hi,
    After entering “enable” the device doesn’t prompt for any password – just refuses access by “ Error in Authentication”.
    Config:
    enable secret 4 AbzRD.
    aaa new-model
    aaa group server tacacs+ server
    server 10.12.39.18
    aaa authentication login default local enable
    (Priv level 15 and the access for the same is not working)
    Issue:
    When I hit enable it's not providing/prompting me for any password - it says " Error in Authentication".
    FarihaASR>en
    % Error in authentication.
    This happens after I upgraded to firmware to 15.1(S1) on ASR1006.
    Any help would be appriciated.
    Regards,
    FAri

    does your ASR have access to your TACACS+ server?
    it appears that there is an authentication problem.  did anything eles change?

  • Mac Mini Wake for Network Access Not working after upgrade

    After upgrading to the latest OS (10.8) the WOL fuction is not work.  This used to work before the release.  i could see the Mac mini on my mac book pro even when it was asleep.  Once I click on it under the shared resources area I could see the Mac wake up.  Now as soon as it goes to sleep it drops from my mac book pro.  I am connected via WIFI but also tried via LAN.  Same result. Any ideas?  Seems to be a bug as I google this issue it appears to be impacting many people.

    Same issue here after updating my iMac to OS X 10.8. I can't use Logmein, wireless syncing to iTunes from my iOS devices, or my Logitech Server software for my Logitech Radio. Once the computer goes to sleep, it is invisible to the rest of the network. This all worked fine on 10.4-10.7. I have double-checked that Wake on Network Activity is turned on. I have disabled all networking interfaces except Ethernet. Nothing seems to help.

  • Oracle Developer Day    Jdeveloper 10g early access not work

    Oracle Developer Day Workshop Materials
    Creating Persistence Services Using Toplink and POJOs
    I use Jdeveloper 10 ea :
    To create a new workspace with a new project for the model
    Application Name EmployeeRequisitionApplication
    Directory Name <JDEV_HOME>/mywork/EmployeeRequisitionApplication
    Application Package Prefix objectmodel
    Application Template No Template [All Technologies]
    rename Project1 to Lab1_PersistenceServices
    Set project properties
    Click the Technology Scope node: Select TopLink in the Available Technologies and click the shuttle button to move to Selected Technologies.
    see the following in the Applications Navigator:
    --EmployeeRequisitionApplication
    ----Lab1_PersistenceServices
    not like that :
    --EmployeeRequisitionApplication
    ----Lab1_PersistenceServices
    ---toplink
    ---toplink mappings
    I use Jdeveloper 1012 , Applications Navigator like :
    --EmployeeRequisitionApplication
    ----Lab1_PersistenceServices
    ---toplink
    ---toplink mappings
    why Jdeveloper 10g ea not work?

    I'm not able to reproduce it exactly. It seems to depend on either what I was doing beforehand or what I have open at the same time.
    I was able to make it happen on demand awhile ago, but I've closed and restarted the environment since then.
    The best I can remember, I had been going up the dialog, starting at the bottom. I was looking for where to enter the location of SQL*Plus. I didn't expect to see it in accelerators, but I was just curious what was in there when...boom. I might have finished one pass thru most of the tree, then started on a second pass when I encountered the problem. Best guess at this point on how to reproduce would be to simulate a user persistently looking for a setting and just not stopping until he found it.
    James Brockman

  • FTP access not working

    The server has FTP running (green light is on). However, the Log (Library/Logs/FTP.transfer.log) remains empty in Server Admin.
    Connecting to the server with SFTP (e.g., Fugu or WinSCP) is not working.
    Fugu returns the error 'Permission denied (publickey,gssapi-keyex,gssapi-with-mic,keyboard-interactive).' Also, I cannot create a tunnel.
    WinSCP returns the error 'No supported authentication methods available'. How the tunnel works in WinSCP is unclear to me.
    Could it be a firewall problem? Which port does SFTP use? In Server Admin I can only see an SFTP port 115, but that is called 'Simple File Transfer Protocol'. Currently 20-21-22 are open.
    Thanks for your help!
    PS I am still a server novice!

    Thanks MrHoffman.
    Does that mean I can turn ftp off and turn off ports 20-21in the firewall without prejudicing my chances to establish an sftp/ssh connection?
    ssh -vvv [email protected] may provide better diagnostics, but to me as a newbie it's unfortunately difficult to understand. Apparently there is a connection established, but authentication fails. This is the relevant second half of the message, with what I hope are the relevant details:
    <snip>
    debug1: Host 'xxx.xxx.xxx.xxx' is known and matches the RSA host key
    debug1: Found key in /Users/.../.ssh/known_hosts:5
    debug2: bits set: 504/1024
    debug1: sshrsaverify: signature correct
    debug2: kexderivekeys
    debug2: set_newkeys: mode 1
    debug1: SSH2MSGNEWKEYS sent
    debug1: expecting SSH2MSGNEWKEYS
    debug2: set_newkeys: mode 0
    debug1: SSH2MSGNEWKEYS received
    debug1: SSH2MSG_SERVICEREQUEST sent
    debug2: service_accept: ssh-userauth
    debug1: SSH2MSG_SERVICEACCEPT received
    debug2: key: /Users/.../.ssh/identity (0x0)
    debug2: key: /Users/.../.ssh/id_rsa (0x100123fd0)
    debug2: key: /Users/.../.ssh/id_dsa (0x0)
    debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,keyboard-interactive
    debug3: start over, passed a different list publickey,gssapi-keyex,gssapi-with-mic,keyboard-interactive
    debug3: preferred publickey,keyboard-interactive,password
    debug3: authmethod_lookup publickey
    debug3: remaining preferred: keyboard-interactive,password
    debug3: authmethodisenabled publickey
    debug1: Next authentication method: publickey
    debug1: Trying private key: /Users/.../.ssh/identity
    debug3: no such identity: /Users/.../.ssh/identity
    debug1: Offering public key: /Users/.../.ssh/id_rsa
    debug3: sendpubkeytest
    debug2: we sent a publickey packet, wait for reply
    debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,keyboard-interactive
    debug1: Trying private key: /Users/.../.ssh/id_dsa
    debug3: no such identity: /Users/.../.ssh/id_dsa
    debug2: we did not send a packet, disable method
    debug3: authmethod_lookup keyboard-interactive
    debug3: remaining preferred: password
    debug3: authmethodisenabled keyboard-interactive
    debug1: Next authentication method: keyboard-interactive
    debug2: userauth_kbdint
    debug2: we sent a keyboard-interactive packet, wait for reply
    debug2: inputuserauth_inforeq
    debug2: inputuserauth_inforeq: num_prompts 1
    Password:
    debug3: packet_send2: adding 32 (len 26 padlen 6 extra_pad 64)
    debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,keyboard-interactive
    debug2: userauth_kbdint
    debug2: we sent a keyboard-interactive packet, wait for reply
    debug2: inputuserauth_inforeq
    debug2: inputuserauth_inforeq: num_prompts 1
    Password:
    debug3: packet_send2: adding 32 (len 26 padlen 6 extra_pad 64)
    debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,keyboard-interactive
    debug2: userauth_kbdint
    debug2: we sent a keyboard-interactive packet, wait for reply
    debug2: inputuserauth_inforeq
    debug2: inputuserauth_inforeq: num_prompts 1
    Password:
    debug3: packet_send2: adding 32 (len 26 padlen 6 extra_pad 64)
    debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,keyboard-interactive
    debug2: we did not send a packet, disable method
    debug1: No more authentication methods to try.
    Permission denied (publickey,gssapi-keyex,gssapi-with-mic,keyboard-interactive).
    Should that tell me something?
    Your help is much appreciated!
    Adriaanh

Maybe you are looking for

  • New Folder Redirection Group Policy is not working

    Recently installed a new server on an older network: Old network server: SBS 2003 New network server: Server 2012 STD The network is working well and all computers are able to communicate with each other. I have already mapped a few network drives to

  • Cash Sales Report

    I need to generate a report on  total cash sales by customer for a specific period, can anyone help? Thanks

  • Itunes syncing issues

    I have recently changes my sons iPod apple ID account over to his own for new apps etc. however when I try to sync his iPof I keep getting a message that says 'can not load data class' and iTunes freezes up. It will not sync. Thanks

  • Best Practices for CS6 - Multi-instance (setup, deployment and LBQ)

    Hi everyone, We recently upgraded from CS5.5 to CS6 and migrated to a multi-instance server from a single-instance. Our current applications are .NET-based (C#, MVC) and are using SOAP to connect to the InDesign server. All in all it is working quite

  • NSU fails download at same file point repeatedly

    I am trying to update my 5800 to 40.0.005.  The update starts and always gets to exactly 114.4MB of the 145.3MB download before stalling and failing after 3 attempts.  When it retries it does so beginning at the 111.0 MB point and again gets to the 1