AP-AIR1261N-E-K9 vs AIR-SAP1602I-E-K9 about performance and price

Hi you.
I have project wifi to Hotel.I see spec of SAP1602I than AIR1261 but price less. Why?
Please help me clear this.
Thanks

I think I answered you question in another post, but the 1602 is a low end access point and the materials cost less than what the 1262 model uses. This is to make the 1602 more competitive with other vendors access points.
Sent from Cisco Technical Support iPhone App

Similar Messages

AIR-SAP1602I-N-K9 client connectivity issue

Hi All,
Using AIR-SAP1602I-N-K9 Autonomous mode and clients connect using the WEP authentication. the problem is any new laptops were unable to associate with the AP.
I have ran dot11 debug for client.
%DOT11-6-ASSOC: Interface Dot11Radio0, Station 7018.8bf7.6814 Associated KEY_MGMT[NONE]
%DOT11-4-ENCRYPT_MISMATCH: Possible encryption key mismatch between interface Dot11Radio0 and station 7018.8bf7.6814
%DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station 7018.8bf7.6814 Reason: Sending station has left the BSS
but unable find the cause. any suggestion to find the cause.
current :
flash:/ap1g2-k9w7-mx.152-2.JB/ap1g2-k9w7-mx.152-2.JB
Regards,
Channa

Using AIR-SAP1602I-N-K9 Autonomous mode and clients connect using the WEP authentication
WEP is no longer treated as "SECURE". So move away from using WEP. Use WPA2-PSK instead.
Here is a very basic sample configuration with single SSID
conf t
hostname <AP_HOSTNAME>
dot11 ssid <SSID_NAME>
authentication open
authentication key-management wpa version 2
guest-mode
wpa-psk ascii <SSID_PASSWORD>
interface Dot11Radio0
encryption mode ciphers aes-ccm
ssid <SSID_NAME>
no shutdown
interface Dot11Radio1
encryption mode ciphers aes-ccm
ssid <SSID_NAME>
no shutdown
interface BVI1
ip address dhcp
end
write memory
HTH
Rasika
**** Pls rate all useful responses ****

AIR-SAP1602I After convert to LAP, No radio interface

Hello,
Our AIR-SAP1602I is running ap1g2-k9w7-tar.152-4.JB6.tar and working normally.
Now, we covert AIR-SAP1602I from autonomous to lightweight which is running ap1g2-rcvk9w8-tar.152-4.JB6.tar to join C3850. (It will be joined then not-joined repeatedly)
After converting, we compare AIR-SAP1602I to another AIR-CAP1602I (It's working perfect with C3850 at this present) and find something strange via "show version" and "show capwap client rcb"
Can someone tell us how to solve this problems, thanks !!!
AIR-CAP1602I
Last reset from power-on
LWAPP image version 10.1.140.0
1 Gigabit Ethernet interface
2 802.11 Radios
AdminState : ADMIN_ENABLED
SwVer : 10.1.140.0
NumFilledSlots : 2
AIR-SAP1602I
Last reset from power-on
LWAPP image version 7.6.100.0
1 Gigabit Ethernet interface
------> No show：2 802.11 Radios
AdminState : ADMIN_ENABLED
SwVer : 7.6.100.0
NumFilledSlots : 0

Can you test this with using full lightweight image (ap1g2-k9w8-tar.152-4.JB6.tar) or different recovery image (ap1g2-rcvk9w8-tar.152-4.JB5.tar). to see the problem is persistent.
HTH
Rasika
**** Pls rate all useful responses ***

Cisco AIR-SAP1602I-A-K9 password recovery

Hi all.
I have acquired a used AIR-SAP1602I-A-K9 that came with a existing configuration and a secret password.
I have tried to search the web for a guide on howto reset the password / reset factory default so i can clear config and
set a new password. I find a bunch for routers by changing the registry but nothing for AP specific, but i wonder if the procedure is the same?
Anyways i tried to boot the device and break its boot sequence, ctrl + break (didnt work), ctrl + c (didnt work). But i have not gotten far in my
endevour to get control of the device.
Anyone who can share a word of wisdom with me, will be meet with appreciation.
Thanks on advance.

Thanks for your solution, but it seems not to work for my device.
the first time, i did two fommands "delete flash...." that's ok, but cannot boot. and the next times it shows:
ap: delete flash:private-config
Are you sure you want to delete "flash:private-config" (y/n)?y
File "flash:private-config" not deleted -- no such file or directory
ap: delete flash:private-multiple-fs
Are you sure you want to delete "flash:private-multiple-fs" (y/n)?y
File "flash:private-multiple-fs" deleted
ap: boot
Loading "flash:/ap1g2-k9w7-mx.152-2.JB/ap1g2-k9w7-mx.152-2.JB"...#############################
File "flash:/ap1g2-k9w7-mx.152-2.JB/ap1g2-k9w7-mx.152-2.JB" uncompressed and installed, entry point: 0x100000
executing...
Error loading "flash:/ap1g2-k9w7-mx.152-2.JB/ap1g2-k9w7-mx.152-2.JB"
Interrupt within 5 seconds to abort boot process.
Boot process failed...
--and of course, it requires me password for enabling. anyone has solutions for that?
Thanks in advance.

I want to use acces point air sap1602i e k9 first times i need default ip adress

hi
i want to use acces point air sap1602i e k9 first times i need default ip adress to setup
it is possible if not give me please solution

Hello fouadissam,
You can connect to the AP with a console cable and enter show ip interface brief, which will display the ip address.
If its connected to a network you can log into your switch and enter show arp | i xxxx.xxxx.xxxx(mac address of the AP).
The below link points to a configuration guide that may be helpful.
http://www.cisco.com/c/dam/en/us/td/docs/wireless/access_point/15_2_4_JB/configuration/guide/scg15_2_4_JB3a.pdf
Hope this helps,
Please remember to rate helpful posts.
Thanks.

Setting a password for user access on AIR-SAP1602I-A-K9 running 15.2(2)JB2

I am trying to assist a group with setting up their AIR-SAP1602I-A-K9 stand alone WAPs. I would like to know how to set a password for clients to access the wireless network through these units. I have been spoiled with our controller based WLAN.

If you are doing it from the CLI
dot11 ssid Test
authentication open
authentication wpa version 2
wpa-psk ascii 0 "your key here"
Interface Dot111Radio 0|1
encryption mode ciphers aes-ccm
ssid Test
If you call a VLAN under the SSID, then you need to call a VLAN with the encryption statement under the radio interfaces.
If you are doing this from the GUI:
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/12-4_10b_JA/configuration/guide/scg12410b/scg12410b-chap11-authtypes.html
HTH,
Steve

Install and configure AIR-SAP1602E-A-K9 via web interface

While setting up the AIR-SAP1602E-A-K9 using a web browser, the AP managed to take the IP address of another device.
You will need some type of software to find out what is on your network or be able to get into your router and access the DHCP list and see what is new. Once you know the IP you can access the AP.

Please check the below link which can helpful:
http://www.cisco.com/en/US/docs/wireless/access_point/1600/quick/guide/ap1600getstart.pdf

HELP NEEDED!! I bought a brand new mac air 11 inch a month ago, and for three days now I can't switch it on.when I do, i can hear the machine is on, but nothing else happens. (yes it is charged). please help

HELP NEEDED!! I bought a brand new mac air 11 inch a month ago, and for three days now I can't switch it on.when I do, i can hear the machine is on, but nothing else happens. (yes it is charged). please help.
I bought it in South Africa and I am currently in Israel.

thank you for the response.its not working, tried that. i can switch the machine on and off, can hear the machine when i hold it to my ear. but nothing works, not the screen, not the sound, nothing.

I love Apple and I use all product. iPhone 3,3s,4,4s,5, iPad and Mac Air(now no more 3,3s and 4)... Only one thing I want to know is... What can I do if some one spy on my phone? How do I protect all my stuff that I put in my phone?

I love Apple and I use all product. iPhone 3,3s,4,4s,5, iPad and Mac Air(now no more 3,3s and 4)... Only one thing I want to know is... What can I do if some one spy on my phone? How do I protect all my stuff that I put in my phone?

the only way that anyone would be able to see anything at all on your phone is if they knew your apple id password, or they were looking over your shoulder
if you are concerned that someone may know your apple id password, please change it at appleid.apple.com

IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?

IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?

If nothing else works, you might try this one. It has worked for many others ...
Use iTunes to do a reset to factory default condition. Always be sure to do your backups before fiddling with your iPad. You might do both the iCloud and the iTunes backup, just to be sure!
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414
Various issues from many different users have been solved by this. I've lost count on how many have been helped by this, so far. But, it doesn't mean EVERYONE will be helped, but I've seen a whole lot. You can only try and see ...
iPad 2 and iOS 8.0.2 Problems
For all iPad 2 owners, this is an important solution for you! These problems result from long-term use, continuous upgrades, corrupted files and various glitches that happen over this long term use. You just need to get your iPad 2 back to FACTORY FRESH CONDITION to start out clean!
Here's one person's solution which will help a lot of iPad 2 users!
keithfrommariettaOct 12, 2014 3:25 PM Re: IPAD2 very slow after IOS 8 upgrade
Re: IPAD2 very slow after IOS 8 upgradein response to pacoKAS
SOLVED: IOS 8 Issues on iPad 2:
I just returned home from a visit to the Genius Bar. Like you and many others, when I upgraded my iPad 2 to IOS 8, it became practically unusable. It was VERY slow, lagged whenever trying to to do anything. Lots of screen freezes and apps spontaneously crashing. I was convinced that the processor on the iPad 2 just couldn't handle the new IOS and I went in to see about restoring to IOS 7.
Thankfully, I was hooked up with a very sharp guy at the bar. The problem is not with the OS, it is with it being an *upgraded* OS. He used the analogy of when you had an older Windows computer and how over time (and over upgrades), they just tended to get slower and slower because of all of the garbage that was carried forward in the upgrades. At those times (and if you've ever had a Windows computer, you get this), the only thing that would speed it up would be to wipe the machine and do a fresh install of the current OS and then reload your apps, and the viola, everything would be fast again. Well, it turns out that IOS can suffer the same problems.
THE FIX: FIRST, be sure you have a current iCloud backup of your device. Connect your iPad to a computer that has a clean fresh copy of IOS 8 on iTunes (this is best done with a computer other than the one that you sync your device to because you DO NOT want to restore it from a back up just yet). Ideally, if you do this at an Apple store you'll be assured of the right version there and someone to answer any questions you might have along the way. You then hold the power and home button down to hard-reset the device and continue to hold them down until it reboots into recovery mode. You then follow the instructions on the computer to reinstall the OS on the device (which wipes everything from it and then reinstalls a clean copy of it). Once this is done (which only takes about 15 minutes), your device will reboot and ask you to set it up. Answer the questions about language, location, etc. and continue until it asks you to log into your iTunes account. Once you do that, it will ask if you want to either 1) Set it up as a new device, 2) Restore from iCloud, or 3) Restore from iTunes. Choose (2), restore from iCloud. This will ensure that it brings down "clean" copies of all of your apps and preferences rather than the potentially corrupted ones that might reside in your iTunes backup. That's it! It will take a few hours depending on how much data and apps you have, but I am happy to report that my iPad 2 is now running IOS 8 and it's running as fast as it ever did when it was brand new!
To sum it up, this process 1) Wipes your device and the garbage causing your problems, 2) Loads a clean and bug-free version of IOS 8 to your device, and 3) restores your apps and data so that it looks just like it did before the wipe, with the exception that it works now! :-)
Note also that by following this process you don't have to go through the painful and laborious process of reloading all of your apps, data and/or settings. iCloud takes care of all of that for you.

My MacBook Air has OSX Version 10.9 and suddenly I can no longer access iPhoto including all my photos on my computer. I have tried to update iphote but the message says I signed on with a different password and I can't update.

My MacBook Air has OSX Version 10.9 and suddenly I can no longer access iPhoto. THe message says, 'You can't use this version of the applicaitonn iPhot with this version of OS X. You have iphoto 9.3.2." When I try to update iPhoto, I get a message saying I signed in with a different apple ID and password. This all happened about the same time I got a new iphone. The iPhoto icon has a circle with a line through it.

southiechics wrote:
HEY APPLE! We need help with this. I'm having the same problem. What gives?
Start a new discussion and post it in the iPhoto forum.
Ciao.

Word has stopped working on my macbook air, i have used it before and powerpoint etc are all still working, but i can no longer open word or word files can anyone help?

word has stopped working on my macbook air, i have used it before and powerpoint etc are all still working, but i can no longer open word or word files can anyone help?

Hi Rachel,
Have you tried reinstalling Microsoft Word? Have you tried reinstalling Office? Have you run any updates recently for Microsoft Office? There was one that came out this week. You may wish to ask this question over at the Microsoft Word forums, there's a good chance you'll get a better answer as well. This forum is primarily designed for the MacBook Air hardware and interoperability with OS X on a MacBook Air.
http://support.microsoft.com/gp/cp_macoffice2008_master

My iPad air won't charge at all and I don't know if it's the charger or port help!i have had a new port put in before and it worked fine after but it's not working now! I have spent way to much trying to fix this thing one problem after another?

My iPad air won't change at all, and I don't know if it's the port or charger cable it is charging normally but it just won't charge. I have had a new port put in before after a charger getting stuck in there but it worked fine after and now it's not working at all! I don't know if maybe it's the charger getting old but I have spent far too much money on this iPad then I should have as it's one problem after another witch is causing me lots of stress.

Try giving your iPad a reset. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and try again.
How are you charging it? its's best charged plugged into the wall not via USB. So if you're trying via USB, try using the supplied power block plugged into the wall.

I am having mac book air 2012model i had installed mavericks and use it, i long press command and power button at a same time and i saw the command prompt, from that i had formated the total hard disk. how to i want to install the OS again ?

I am having mac book air 2012model i had installed mavericks and use it, i long press command and power button at a same time and i saw the command prompt, from that i had formated the total hard disk. how to i want to install the OS again ?
i tryed with download mavericks but finally its saying a error message like cant conect to istore like that its saying and every thing is clear like internet and other stuf i tryed with 3times no progress same error pls help.. i bought this lap for my bro with his apple id only we use it now he got a new mac book pro so he gave to me so i formated and use it i use my apple id is that problem come because of changing apple id ? pls eplain

Firstly, what is the source of the 10.6.4 disc? Is it the original installation disc for your MacBook, or one 'borrowed' from another computer?
It isn't the retail version, because that's 10.6.3.
Assuming it's the correct disc (i.e. the one that shipped with your Mac), you need to boot from it again.
OK the language page.
From the installer screen, ignore the continue button, go to the menu bar and choose Disk Utility from the Utilities menu.
In DU, select your internal drive in the sidebar (the top item with the makers name and serial no.).
Run Repair Disk. If that comes up as disk OK, click the partition tab. Select the partiton from the drop-down above the graphic; 1 partiton is all you need.
Go to the options button and ensure that the partition scheme is GUID and the file system to Mac OS Extended (Journalled). Name the partiton (usually Macintosh HD), click Apply.
When the Macintosh HD volume appears below the drive name, quit DU and see if you can then install.
If the screen after the language screen doesn't show the menu bar, it may be necessary to use another Mac to do the job with the MB in Firewire Target Disc Mode. If it won't boot in TDM, or the MB doesn't have FireWire then it's getting very difficult.

HT201335 can i use air play with my macbook pro and apple tv

can i use air play with my macbook pro and apple tv

AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). It also requires the computer to be using wi-fi.

AP-AIR1261N-E-K9 vs AIR-SAP1602I-E-K9 about performance and price

Similar Messages

Maybe you are looking for