AP Payment User Responsbility's Data Group to be assigned for application as Payables or Payments?

Hi,
I am in version R12.1.3 . I have a requirement to create a user who must have access only to create payments in AP module.So when i try to define a responsibility for this payment user
there is a data group to be assigned. In this data group block for application there are 2 options i.e Payables & Payments? What should I select & what is the difference of selection one over the other?
Appreciate your help.
Thanks

Hi,
i did not see any difference .... I performed a test case, where i created a payment using the new responsibility i have created having data group application as Payments, the payment was successful ... Later i have modified the data group for this new responsibility from payments to payables, then the test payment i have made was also successful....
Not sure about its impact, may be i am having responsibilities which has full access, hence i cannot see the difference in my environment ....
Regards,
Ivruksha

Similar Messages

  • HT4203 I have turned off the Data use on the I-phone 4s but am told by AT&T that data is still being used for applications.  How is this possible. Can someone help me understand this.  Thanks.

    I have turned off the Data use on the I-phone 4s but am told by AT&T that data is still being used for applications.  How is this possible. Can someone help me understand this. 

    I assume you are including the STIX font as part of your epub files?     
    Perhaps the folks who do this blog might be able to help -- they have done some work with font embedding:
    http://www.pigsgourdsandwikis.com/2011/04/embedding-fonts-in-epub-ipad-iphone-an d.html

  • No data media can be created for the proposal run - Bacs Payment

    Hi,
    When i schedule program RFFOGB_T for bacs payment and select proposal run only i get the following error "No data media can be created for the proposal run". But when i execute the program with out selecting the check box " Proposal run only...a file was getting generated...Could any onle pls help me resolve this problem.
    With Best Regards,
    M.Naveen Kumar

    The post has been answered

  • RPM Upload/Download Project Data u2013 No Selection list for Application system

    When trying to upload from project or download to project from/to application SAP Project System there is no selection list under the drop down field for Application system. As I understand from the RPM guides, this is the logical system. We have defined the logical systems in IMG. Is there some other configuration we are missing?
    We are using SAP RPM 4.5 (CPR Xrpm 450_700: Support package 0009)
    Any help appreciated

    Hi,
    Have you deleted cache and tried it again.
    Pramod

  • Data Groups in EBS 11.5.10.2

    Hi ,
    Examining the current rows for the data groups , i found out that there is not even a record for the ORACLE ID which is different for the value APPS... in other words for all records the Oracle Id column of the form has the value APPS for the Standard Data Group...
    The above is true for both standard appls as well as custom....
    However , for a totally custom new application... isn't it better to register a new user(say it test) and in the relation between the Oracle Application Name and OracleId to assign this new db user to this new custom App...????
    And something else....
    I haven't understood why for the INV for example Application the Oracle Id user in the data group is APPS ... and not INV... since the basic tables/views for this INV APP are on INV db user.....!!!!
    Thanks a lot
    Sim

    Sim,
    You can select the ORACLE ID you want to assign your application. The application uses an ORACLE ID to access tables in the database. Each ORACLE ID allows access to a predefined set of tables in the database.
    For your custom application, you can assign it to a different Oracle ID (not APPS), but you need to make sure that the user have proper grants and synonyms. Such permissions are already granted to APPS user.
    More details can be found in:
    Oracle Applications System Administrator's Guide - Configuration
    http://download-uk.oracle.com/docs/cd/B25516_14/current/acrobat/115sacg.zip

  • How to implement a single user in mutiple AD groups?

    Hi all,
    I need your help in achieving the following requirement.
    1. Security should be applied based on a DeptName from DeptTable For example Department Name= A , Department Name =B, Department Name =C.
    2. Also security should be based on Officer Indicator from EmployeeTable= Yes or No.
    3. Employee Salary information is grouped into EmpFacts in presentation folder. Only a few users who belong to the group which has access to the folder, should be able to see this folder when they login.
    (DeptAOfficerYesEmpFactYesSuper. All the groups which has EmpFactYes are given permissions to EmpFact Folder in presentation Folder)
    4. On top of these all the users are classified into Mega and Super users. Mega users should have read only access to dashboards and Super users should be able to edit the dashboards. ( All the groups which are classified as Super are given access to "Edit Dashboard" in Presentation Catalog )
    NOTE: As we are deploying our rpd in the shared environment we are not supposed to use SESSION VARIABLES.
    TO achieve the above requirement we have created AD groups such that DeptAOfficerYesEmpFactYesSuper , DeptAOfficerNoEmpFactNoSuper and so on. By this method all the permutation and combinations will result in AD groups.
    We know that this approach will lead to severe maintenance issues and hence looking for other alternatives.
    We are now planning to have only DeptA, DeptB, DeptC groups and use them in conjunction with three other groups ( Officer, EmpFact, Super).
    Can we add a single user in all these user groups ?
    Kindly let me know if you need any clairty on this.
    Your help is highly appreciated.
    Edited by: user10682075 on May 11, 2011 7:24 PM

    Yes and no..meaning a user with just 1 group assigned will retrieve less data then a user with multiple groups assigned, so yes, more data to select will affecct your performace (a bit), but no, the use of multiple security groups by itself won't affect performance..
    The use of multiple security groups will reflect in the use of an IN or a subquery in your logical query, OBI will determine the best way in each case and your database (and statistics) will determine the best physical query and therefore query performance.
    M.

  • I have recently transferred data from my old Mac to my new one. The result was good, but I have 2 users now, whose data I want to merge into 1 single user, so to avoid having to switch from one user to the other to view and use certain files. How to do it

    I have recently transferred data from my old Mac to my new one. The result was good, but I have 2 users now, whose data I want to merge into 1 single user, so to avoid having to switch from one user to the other to view and use certain files. How to do it?

    Here's an easy way:
    Pick the user that you want to eliminate (making sure that the remaining user has administrator privileges) and move all of the data that you want to keep into the Shared folder. Reboot or log out and login to the user you want to keep. Copy all the data from the Shared folder into your account - placing it neatly in folders (Documents, Music, Movies, etc.).
    Once the data is moved, log into the account you want to delete just once more to make certain that you've grabbed all the data you want to keep. Log out and log back into your admin account and go to System Preferences>Users & Groups and delete the 'old' user.
    That should do it.
    Clinton

  • Re: (forte-users) Delays in data transfer..server-to-client

    I would try using DOM (distributed object manager) traces. trc:do:20 will
    give you information on each messages sent from and received by the
    partition. Levels are 1, 2, 5, 7, and 8, and trc:do:*:8 is very
    verbose. trc:do:20:1 may tell you what you want to know. trc:do:1:1 will
    give you a basic 1-line-per DOM event trace that may also be all you need.
    Communications manager traces will tell you about network and socket-level
    activity, but not about the sizes of the messages themselves. In addition,
    the operating system makes decisions about physical packet size and
    send/receive timing, so CM activities only generally map to actual network
    activity.
    -tdc
    iPlanet Integration Server Engineering
    At 09:24 AM 5/1/01 -0700, you wrote:
    All,
    We are experiencing delays in object transfer between server and client. The
    delays are longer with large objects (a single object with an array of objects
    that reflect the rows returned in a database) than small (ie: 10 rows vs 400).
    Does anyone have any (actual) experience using the various Forte' flags in
    order
    to show the actual size of the object/packets being passed between the server
    and client?
    We are using input/output between client and server, input on all the SO's
    within a partition. Response on the server side is good, roughly 6 seconds or
    so. The round trip fare however from the time the client makes the SO call to
    the time that it completes is in the 25-30 second range, leaving roughly 20-25
    seconds unaccounted for. I have brought in the network guys who are
    requesting
    the data size and packet information. I did not see what I am looking for
    using
    the trc:cm:*:4 and trc:cm:*:8 flags. I will be trying the trc:cm:*:10
    flag, but
    Forte' indicates that this flag is very verbose, the systems group hates
    it when
    I use up all of THEIR disk space!
    Any ideas would be appreciated as always.

    Jeff,
    If the object you are passing does not require changes made to it in the
    server partition to be returned, pass the object as copy input (pass by
    value not reference). If it is necessary to pass the object as input, try
    to pass only the attributes that are required to the remote partition
    instead of the whole object.
    Input/Output is normaly used with scalar variables. When a scalar is passed
    to a remote partition, if the value is changed in that partition, the value
    is not returned to the calling partition unless Input/Output is used.
    Input/Output should not be used for object type parameters, if you need to
    pass a reference, use Input only. If you can pass by value, use Copy Input.
    You will notice a huge difference in performance changing from Input to Copy
    input when passing large objects.
    Hope this helps,
    Travis Foote
    Fortedeveloper.com Inc.
    ----- Original Message -----
    From: "Jeff Bennett" <[email protected]>
    To: <[email protected]>
    Sent: Tuesday, May 01, 2001 9:24 AM
    Subject: (forte-users) Delays in data transfer.. server-to-client
    >
    All,
    We are experiencing delays in object transfer between server and client.The
    delays are longer with large objects (a single object with an array ofobjects
    that reflect the rows returned in a database) than small (ie: 10 rows vs400).
    >
    Does anyone have any (actual) experience using the various Forte' flags inorder
    to show the actual size of the object/packets being passed between theserver
    and client?
    We are using input/output between client and server, input on all the SO's
    within a partition. Response on the server side is good, roughly 6seconds or
    so. The round trip fare however from the time the client makes the SOcall to
    the time that it completes is in the 25-30 second range, leaving roughly20-25
    seconds unaccounted for. I have brought in the network guys who arerequesting
    the data size and packet information. I did not see what I am looking forusing
    the trc:cm:*:4 and trc:cm:*:8 flags. I will be trying the trc:cm:*:10flag, but
    Forte' indicates that this flag is very verbose, the systems group hatesit when
    I use up all of THEIR disk space!
    Any ideas would be appreciated as always.
    -jeff
    For the archives, go to: http://lists.xpedior.com/forte-users and use
    the login: forte and the password: archive. To unsubscribe, send in a new
    email the word: 'Unsubscribe' to: [email protected]

  • Payment Stop Before Due Date.

    Dear All.
    I need to know is there any option we have to stop the processing of Vendor Payment against the NON DUE ITEMS.
    Here in my client, normal terms of payment is for 45 Days. Now the users are asking that, if a line item is Not Due as on Date, if by mistake we have selected such item for payment processing, the system should drop a error & stop the processing.
    The requirement is as follows as error message....
                 """ The Selected Item is Not Due"""""
    So, wht i have found out is, by changing the line item layout included the additional fields like:
    Due Date
    Item Due Indicators.
    But, here these are only for the information purpose, which dont have any control over item payment process.
    SO, CAN ANY BODY PROVIDE SOME IDEAS ON THIS, IF SUCH OPTION IS AVAILABLE IN SAP..
             """ LINE ITEM PAYMENT BLOCK IS NOT SUITABLE HERE """""
    Thanks
    Talluri

    Hi
    With my knowledge,  You have choosen the best process ie., brining the due date in the screen layout. even thou, the client required to make the error message, first work out the change of the message type
    or
    there is no such standard process to stop the payment voucher. Either you have to evaluate any routine
    or alternatively last option will be
    you can use the following procedure
    1. Maintain the Vendor Master -> Payment Transactions -> Maintain the Payment Block
    2. Generate the vendor line item daily with due date is "today's" date & select the MIRO document numbers.
    3. Release the documents through MRBR by selecting the above line items.
    This is for your information.
    Regards
    Anilkumar

  • Payment term by fixed date

    Hi,
    I need to create payment term by fixed date
    For e.g  2% discount if paid by Oct 31
                 Net  Nov 1
    Can anyone let me know how to proceed
    thanks

    Hi Clive,
    My questions is related to ur answer..can u please explain why asked me to give add month as 1
    User wants 2% discount if he pays before Oct 1..i.e still we have 3 months (aug,sept oct) so by just putting fixed date as 31, will it not count on the Aug 31...
    so am not sure how to proceed..if u can explain..will really appreciate

  • Payment term and Baseline date are not appear after residual clearing

    Hi Friends,
    We have an issue in Payment term. Recently small changes were made in OBA3.Here they enable the option of "Payment term from invoice". the function of this is to - copy  the payment term and baseline date form invoice to Partial item .Due to enable of this function after residual clearing the payment term and base line fields are get empty.
    Now user want to get these fields to be updated even not changes take place in OBA3.Can you please suggest me the way,  with out changes in OBA3 can we get payment term and baseline date field after residual clearing .Please suggest .
    Thank you
    Regards,
    Dharma

    Hi Julie,
    Thanks for your reply..
    Here the issue is, the user using Baseline date for two specific purpose.
    1.Due day calculation-auditing purpose
    2.Agning report
    For due day calculation they recently enable the option "payment term from invoice in -OBA3".Due to active the function,system copy the payment term and baseline date from invoice to residual item.it means the residual item having baseline data as invoice date not posting date.
    But for aging report purpose it has to be update posting date.
    now user want to meet these both requirement .How can it possible .Please suggest.
    Thank you
    Regards
    Dharma

  • Payment Terms-Manual due date Input-Which field?

    Dear Gurus,
    I can observe an option at the payment terms of "no default" which means that payment due date has to be entered manually.Is there some field in the order or billing document where the due date can be entered manually.Kindly hep,thank you.
    Regards,
    Sam Ahmed

    Hi
    By making due date manual you want to give a free hand to end user for entering any date as due date. He might enter 30 days or 300 days and this is the reason payment terms are used. I don't know about your business scenario but in most of the cases due date is determined from payment terms.
    If you want to make it manual then you can enter payment term with pay immediate and enter date in Fixed value date as suggested by Ravin or enter days in add value days field. System will take this date as billing date for accounting document and will calculate payment term days from here and if you payment term is pay immediate then this would be your due date as well.
    Thank$

  • Payment terms and Baseline date deact. during posting

    Is it possible to deactivate fields: Payment terms and Baseline date in FB60 and MIRO so that the user can't change them? Terms of payment are defined in Vendor Master Data and shouldn't be changed during posting.

    Hi,
    You can use Screen Variants using T.Code  SHD0 . You can make certain field as display only. You can use the help of your abapers......
    Assign points if found useful
    Regards,
    R.Ramakrishnaraj

  • How to add a user to an existing group????

    Can't seem to find how to add a user to an existing group (staff). I am trying to share data (rw) between my admin account (root) and a development user. On any other UNIX system I would just add the user name in the /etc/group file & logout/login in. It don't work here!
    Suggestions??
    thanx
    mt

    OS X doesn't use /etc/groups. This file is present but does nothing AFAIK.
    Leopard uses directory services to handle groups and users.
    membership in groups with GID>500 can be handled from GUI in system preferences->accounts. other groups can be handled from terminal with dscl (directory services command line). do man dscl for details.
    to add a user to a group you'd do
    sudo dscl . append /groups/groupname GroupMembership username
    However, there should be no need to do it with "staff". every user with an account on your computer is a member of staff by default.

  • User logon history date and time details

    Hi,
    can any  tell me the user logon history tables,
        as usr02 is only having the present log on details

    use below Function module
    CALL FUNCTION '<b>RSAU_READ_FILE</b>'.
    it will solve your problem...
    =====================================
    Use BAPIS there are very useful BAPIS to get the user's info.
    BAPI_USER_CHANGE               Change User                                                              
    BAPI_USER_CLONE                Create User with Template in Another System                              
    BAPI_USER_CREATE               Create a User                                                            
    BAPI_USER_CREATE1              Create a User                                                            
    BAPI_USER_DELETE               BAPI to Delete a User                                                    
    BAPI_USER_DISPLAY              Display users                                                            
    BAPI_USER_EXISTENCE_CHECK      Check a user exists                                                      
    BAPI_USER_GET_DETAIL           Read User Details                                                        
    BAPI_USER_LOCACTGROUPS_ASSIGN  Change Activity Group Assignment for Dependent Systems from Central System
    BAPI_USER_LOCACTGROUPS_DELETE  Delete Activity Group Assignments in the Dependent Systems               
    BAPI_USER_LOCK                 Lock User                                                                
    BAPI_USER_LOCPROFILES_ASSIGN   Change Profile Assignment for Dependent Systems from Central System      
    BAPI_USER_LOCPROFILES_DELETE   Delete Profile Assignments for Dependent Systems                         
    BAPI_USER_PROFILES_ASSIGN      User: Assign profiles                                                    
    BAPI_USER_PROFILES_DELETE      User: Delete All Profile Assignments                                     
    BAPI_USER_UNLOCK               Unlock user                                      
    ===================================
    U can see tables:
    USR01 User master record (runtime data)
    USR02 Logon data
    USR03 User address data
    USR05 User Master Parameter ID
    USR12 User master authorization values
    <b>Reward Points if it is useful..</b>
    Thanks & Regards
    ilesh 24x7

Maybe you are looking for