App does not run once USB Cable disconnected

We are seeing a strange behavior with the windows phone 8 app.
The app is built on phonegap. When the device is connected to the PC via USB cable, and app is installed to the device through the Visual Studio, it runs normally as long as the cable is connected to the device. But once the cable is disconnected from the
device, the app stops working.
Any reason why this should be the case? Is there anything we are missing?

This does not sound like anything that is normal to Windows Phone development. Have you asked on the PhoneGap forums (if there is one)?
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

Similar Messages

Nokia 6233 does not notice any USB-cable

I'm trying to upload some files from my phone to my computer. The problem is that when I connect USB-cable (ca-53, should be suitable with 6233) nothing appears on my phone screen. When I click the settings > connections > usb-cable, it only tells me "first connect the usb-datacable".
So what should I do? The problem isn't in my computer, I've tested it with another usb connection.

In that case, uninstall all Nokia related software and drivers with Revo, clean the registry with Ccleaner. Reinstall the latest PC Suite, turn off antivirus during install. Reboot the PC. Start PC Suite and then connect the phone in PC Suite mode.
http://www.revouninstaller.com/revo_uninstaller_free_download.html
http://www.filehippo.com/download_ccleaner/
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

The Mail App does not run in my Mac, and also does not allow to download any actualization

I also tried to send it to the Trash Can but there´s always a message that says "Close all the applications first" even when all the apps are closed but aparently the #mailapp is not

Hi, are the pics at a remote location, or on your Mac?
Have you tried drag & dropping the graphics on the signature window?

Ebedded Flex app does not play automatically

I have a flex app that is embedded in a web page.
When the page loads for the first time the app does not run
automatically but is in "loop" mode.
In order to embed the application in the html page we have
copied the html and javascript files that the Flex builder
generates :
AC_OETags.js, history.htm, history.js etc.
This only happens the first time the page is loaded,
subsequently it loads and plays automatically.
I would be grateful is anyone has some insight here.

Thanks for your answer, we found a similar workaround.
We did the following:
1) disable automatic starting of the SWF in the script that
created the plugin by adding these parameters:
"play", "false",
"loop", "false",
2) adding some own javascript to the template-html:
var isMovieLoaded = false;
function setIsMovieLoaded(){
isMovieLoaded = true;
function start(id) {
var swf = document.getElementById(id);
if (swf) {
swf.Play();
function playMovie(){
if( !isMovieLoaded ){
start( "${application}" );
window.setTimeout("playMovie()", 3000);
3) calling setIsMovieLoaded() via ExternalInterface from the
loaded application when initializing:
if (ExternalInterface.available)
ExternalInterface.call("setIsMovieLoaded");
This way when the application loads and plays correctly, the
delayed call to playMovie in the html-template does nothing,
because the flag isMovieLoaded was already set by the application.
If that is not the case, the movie is explicitly startet via
the start function.
Thanky anyway :-)

Music does not stop playing when I disconnect from USB in car

When iphone is connected to car stereo, music does not stop playing when I disconnect the usb cable. If someone is calling me and I unplug from USB, all I hear in my ear is music...I cannot hear the person calling me. Not sure what's happened but it never used to do this. Any suggestions?

Nseries phones have behaved this way since forever.
I don't know any way to change this. Same behavior happens if you unplug your headset or headphones.
640K Should be enough for everybody
El_Loco Nokia Video Blog

When you load Windows via Boot Camp Assistant program and run Windows does not recognize the "usb" outlets cannot identify the device through the Dvd or flash

When you load Windows via Boot Camp Assistant program and run Windows does not recognize the "usb" outlets cannot identify the device through the Dvd or flash

Did you install BC drivers on the Windows side?

Recently upgraded from Windows 7 to 10. Now EOS Utility app does not work.

Recently upgraded from Windows 7 to 10. Tried downloading photos from my 5D Mark II, but EOS Utility app does not work to Select Images to Download, unlike before. But when I disconnected my External Hard Drive, EOS Utility app main window works normally. I need the external hard drive connected all the time. How can I fix this problem, please? Thanks.

This sounds like a hardware problem with your computer. A USB port puts out a certain amount of power and can be used to power external devices... such as hard drives. But the camera does not use any USB power -- it runs on the power from the internal battery. It only uses the data pins to communicate. But you are describing a situation in which having one device connected a to a USB port prevents a different USB port from working. That can happen if the device in one port is drawing too much power (it can prevent other ports from working correctly.) Did you have this problem when using Windows 7?

RT does not run when deployed to 9642 sbRIO LV 2011

I have code deployed to a Ni sbRIO9642 where the RT code does not run when deployed to the when using LabVIEW 2011. It appears the NI-RT.ini file on the target is not being properly configured. I manually configured the ini file using FTP and the RT still will not run. I built a small test application and the RT on that did not run either, although i had hard validatiuon that the FPGA code was indeed running. Thanks - Keith

Hey Martin,
I don't know if this specific problem was resolved, but there was a known issue in LabVIEW Real-Time 2011 (sp1) that exhibited this behavior.
Shared Variables
292012
Return
Real-Time Applications containing typedef Shared Variables fail to run.
If you are building an RTEXE that contains Shared Variables whose data type is based upon a type definition and the build specification is configured to disconnect type definitions the RTEXE will not run.
Workaround: 1.) Manually disconnect the variable from the typedef before building the application 2.) Change the build spec so it doesn't disconnect type definitions
Reported Version: 2011 32-bit
Resolved Version: 2012
Added: 10/11/2011
Although this has been fixed in 2012, and shouldn't be an issue for you developing in LabVIEW 2012. Have you tried implementing a heartbeat VI? to verify if your RT app is actually running and not communicating? (great example here)
Do you have the system state pushier installed on your cRIO? does it point to a memory leak or 100% CPU utilization? (steps to install it found here, if you're not familiar)
Are you using the cRIO in Scan Interface mode? or in the FPGA interface?
Applications Engineer
National Instruments
CLD Certified

My note app does not stay open

My note app does not stay open
<Email Edited by Host>

Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

Android App does not work for me

Hello:
I have an Android Tablet with 2.3.3 version.
The tablet has flash player 10.1 and Adobe Air 3.0 installed.
I have made a simple apk in flash CS5.5 iwith Adobe Air SDK 3.1.
The application only has a frame with a "Welcome" label.
When I install the application in the tablet is OK but when I run it I have no error only a black screen,
Can you help me to solve this, Please?
thank you very much.

The device I run from is Android 4.1. It does work but the screen ratio is wrong. Not slating BT. The app is brilliant but want to watch in full 16:9. I think it's a slight oversite on there part which can be easily fixed.
My device connects to the TV via HDMI so I suspect the BT sports apps does not recognise this and plays it in 4:3 left justified.
Live screen shot courtesy of the BT Sport App.
Playing stream before going full screen and preview stream is 16:9
Playing full screen and ratio is 4:3

REPORT DOES NOT RUN CORRECTLY , URGENT PLEASE HELP

Hi,
I am trying to run a report from visul basic screen, but it does not run correctly. Here is how I am running the report. There is a screen developed in VB This screen prompts the user for user id and password. Once it gets that, it connects to the oracle database and pulls out a column from a table. And passes that value as a parameter to the report. Now I am calling the the report for each individual value . There are 21 value being pulled out of the database and it invokes the report 21 times. So there are 21 report engines gets started. Is there a better way to do that ? Secondly when I pass the parameter , some parameters does not pass correctly I guess , because its not generating any out put . Like out of 21 may be 10 or 11 reports gets generated correctly but rest of the reports are blank. I debug the screen i saw that the parameter value is correct, everything seems good. But still the reports are comming blank. Any Idea why it is so ? The command line that i am using in VB screen is
Shell "C:\progra~1\ora95_2\bin\rwrun60.exe P:\Business_Analysis_&_Reporting_Tool\Test_REPORT_Templates\STORE_TYPES\Baby_Distribution_Report.Rdf USERID=" & UID & "/" & PWD & "@cposp201 DESFORMAT=PDF DESTYPE=FILE DESNAME=" & txtPath.Text & Replace(strName, " ", "_") & ".PDF BRND='" & adoRecBrand!Brand & "' PRINTJOB=NO PARAMFORM=NO"
In the above command " adoRecBrand!Brand " is the parameter thats being passed. This is actually a recordset and brand is the column in it. When I debug the screen , I see the value also there. But the report comes out blank. Please help. This is urgent.
Thanks
Feroz

The way you call reports is not scalable. If you have 100 records come back from database, you would end up launch 100 engines at the same times, which probably will blow up your machine. You should use oracle reports server to do that. You can either use rwcli60 to submit the job to reports server, or invoke rwcgi60 from URL.
I am afraid some of reports engine failed to start and you get nothing back in your case.
After switch to use reports server achitecture, if you still see some report is blank in your application, then you can run that report with that special set of parameters manually and see if any problem with the report itself.
Hope this helps.
Thanks,
-Shaun

Reminders App does not work on Yosemite with two iCloud accounts.

The Reminders App does not work on Yosemite (10.10.1) with two iCloud accounts. It seems like when there are two iCloud accounts connected in Yosemite (10.10.1) the plist file for Reminders disappears.
I have tried restarting Reminders; restarting the mac; starting the mac in recovery mode to repair the disk and disk permissions; and starting the mac in recovery mode and reinstalling OSX.

Yes sharing Reminders list works. The problem is, I have one shared iCloud account with a colleague (shared calendar, Reminders and email). It makes it easier to run our business with a single shared iCloud account...I know it's not the typical usage.

My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows proc

My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows processes, while Firefox does not run.
I manually deleted Firefox from the list once I have Windows processing.
And when I clicked on Firefox, Firefox will open quickly and easily.
Firefox process in Windows Processes names list called "firefox.exe * 32" is.
Please try to solve my problem, my problem is how to solve?

Hi, are you saying that you start Firefox and it stalls -- you can see it in the Task Manager but it never displays -- but if you kill that process and start Firefox again it starts up properly that second time?
If you look at the statistics available in the Task Manager's processes tab such as bytes read or other bytes, can you see whether Firefox is doing anything at all? ''Note: You might need to add columns if your Processes tab isn't set up to display statistics. You can do that from the View menu.''
You might already have seen these troubleshooting articles. If not, does anything here help:
* [[Firefox won't start - find solutions]]
* [[Firefox hangs or is not responding - How to fix]]

Most of the default Mac Apps does not work after Mavericks Upgrade

Hi, I did everything, but nothing has brought me out of this misery .
I Updated Maverick just 2 days after its release. Had no problems, other then slow Finder. I restarted my iMac last week, and got caught with these issues, known to me, not sure what all bugs are there.
All these apps does not work: App Store, TextEdit, Preview, Terminal, iBooks, Maps, Calendar, Contacts, Mail, etc
I do not know how to do a clean install, as I had upgraded from Snow Leopord to Mountain Lion and to Maverick using App Store, which does not open at all.
Hoping to get some response soon from Apple support team to help me.

Hi Arthur,
Thanks for the headsup about Apple Support thing... My iMac is not under warranty.
And below is the report generated from EtreCheck. Hope it can help me find the solution.
Hardware Information:
          iMac (20-inch, Early 2008)
          iMac - model: iMac8,1
          1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
          4 GB RAM
Video Information:
          ATI Radeon HD 2400 - VRAM: 128 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0
          AirPlay: Version: 1.9
          AppleAVBAudio: Version: 2.0.0
          iSightAudio: Version: 7.7.3
Startup Items:
          FanControlDaemon - Path: /Library/StartupItems/FanControlDaemon
          HDDFanControlDaemon - Path: /Library/StartupItems/HDDFanControlDaemon
          HP IO - Path: /Library/StartupItems/HP IO
          HP Trap Monitor - Path: /Library/StartupItems/HP Trap Monitor
          MissingSyncListener - Path: /Library/StartupItems/MissingSyncListener
          MySQLCOM - Path: /Library/StartupItems/MySQLCOM
          ParallelsDesktopTransporter - Path: /Library/StartupItems/ParallelsDesktopTransporter
          VirtualBox - Path: /Library/StartupItems/VirtualBox
System Software:
          OS X 10.9 (13A603) - Uptime: 2 days 2:6:45
Disk Information:
          WDC WD2500AAJS-40VWA1 disk0 : (250.06 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    My iMac (disk0s2) /: 249.2 GB (22.18 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          Apple, Inc. Keyboard Hub
                    Apple, Inc Apple Keyboard
          Western Digital My Book 1110 999.5 GB
                    WORK (disk1s1) /Volumes/WORK: 375.81 GB (95.66 GB free)
                    PLEASURE (disk1s2) /Volumes/PLEASURE: 623.69 GB (35.57 GB free)
          Apple Inc. Built-in iSight
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
          com.logmein.driver.LogMeInSoundDriver          (1.0.0)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.adobe.SwitchBoard.plist
          [failed] com.google.GoogleML.plist
          [loaded] com.google.keystone.daemon.plist
          [not loaded] com.logmein.logmeinserver.plist
          [loaded] com.microsoft.office.licensing.helper.plist
          [loaded] com.wdc.WDDMservice.plist
          [loaded] com.wdc.WDSmartWareServer.plist
          [loaded] rapiback.plist
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist
          [loaded] com.google.keystone.agent.plist
          [loaded] com.logmein.logmeingui.plist
          [not loaded] com.logmein.logmeinguiagent.plist
          [not loaded] com.logmein.logmeinguiagentatlogin.plist
          [loaded] syncmateStarter.plist
User Launch Agents:
          [loaded] com.adobe.AAM.Updater-1.0.plist
          [loaded] com.adobe.ARM.[...].plist
          [loaded] com.facebook.videochat.[redacted].plist
          [loaded] com.macpaw.CleanMyMac.helperTool.plist
          [not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist
          [loaded] com.macpaw.CleanMyMac.volumeWatcher.plist
User Login Items:
          AirPort Base Station Agent
          EarthDesk Engine
          LMILaunchAgentFixer
          AdobeResourceSynchronizer
          RealPlayer Downloader Agent
          Windows Phone 7 Connector Agent
          iAntiVirus
          TextEdit
          StatusMenu
          HP Scheduler
          WDQuickView
3rd Party Preference Panes:
          Application Enhancer
          DivX
          EarthDesk
          Fan Control
          Flash Player
          Flip4Mac WMV
          Growl
          MacFUSE
          WDQuickView
Internet Plug-ins:
          AdobeExManDetect.plugin
          AdobePDFViewer.plugin
          AdobePDFViewerNPAPI.plugin
          Default Browser.plugin
          DirectorShockwave.plugin
          DivXBrowserPlugin.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          Flip4Mac WMV Plugin.plugin
          iPhotoPhotocast.plugin
          JavaAppletPlugin.plugin
          QuickTime Plugin.plugin
          RealPlayer Plugin.plugin
          SharePointBrowserPlugin.plugin
          Silverlight.plugin
User Internet Plug-ins:
          Picasa.plugin
          Unity Web Player.plugin
          WebEx.plugin
          WebEx64.plugin
Bad Fonts:
          None
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
              29%          mds
               2%          WindowServer
               1%          mds_stores
               1%          LogMeInGUI
               1%          RealPlayer Downloader Agent
               1%          EtreCheck
               1%          FanControlDaemon
               0%          uTorrent
               0%          notifyd
               0%          networkd
Top Processes by Memory:
          1.00 GB            mds
          106 MB             mds_stores
          78 MB              Google Chrome
          49 MB              Finder
          45 MB              WindowServer
          40 MB              Google Chrome Helper
          37 MB              VLC
          29 MB              uTorrent
          20 MB              EtreCheck
          16 MB              DashboardClient
Virtual Memory Statistics:
          43 MB              Free RAM
          989 MB             Active RAM
          934 MB             Inactive RAM
          447 MB             Wired RAM
          4.25 GB            Page-ins
          454 MB             Page-outs

Lightroom 5.6 does not run following latest CC Photoshop 2014 and Bridge updates

I am running Creative Cloud Photography on OSX 10.9.4. Yesterday I updated Photoshop 2014 and Bridge using the CC desktop app as prompted by CC. Since then Lightroom does not run. When I open it the blue intro screen flashes up for less than a second. To try and recover I have uninstalled Lightroom (5.6) and re-installed it several times using both the CC app and directly from the Adobe website. The result is always the same. I can find nothing about this on Adobe Support although I can find others who have had the same symptoms on a web search. Their solution was to re-install Lightroom from the web site but that hasn't worked for me. I had Lightroom installed before I went to CC and before CC included Lightroom in the Photography package. Does anyone understand this issue and can you please advise me what to try next? Many thanks.

Okay, Solution 1 from this link Error "Unable to start correctly - 0Xc00007b" fixed it for me. But now it's asking me for the serial number which I can't find anywhere... shouldn't that go without with the cloud?

App does not run once USB Cable disconnected

Similar Messages

Maybe you are looking for